Liver dECM–Gelatin Composite Bioink for Precise 3D Printing of Highly Functional Liver Tissues
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
In recent studies, liver decellularized extracellular matrix (dECM)-based bioinks have gained significant attention for their excellent compatibility with hepatocytes. However, their low printability limits the fabrication of highly functional liver tissue. In this study, a new liver dECM–gelatin composite bioink (dECM gBioink) was developed to overcome this limitation. The dECM gBioink was prepared by incorporating a viscous gelatin mixture into the liver dECM material. The novel dECM gBioink showed 2.44 and 10.71 times higher bioprinting resolution and compressive modulus, respectively, than a traditional dECM bioink. In addition, the new bioink enabled stable stacking with 20 or more layers, whereas a structure printed with the traditional dECM bioink collapsed. Moreover, the proposed dECM gBioink exhibited excellent hepatocyte and endothelial cell compatibility. At last, the liver lobule mimetic structure was successfully fabricated with a precisely patterned endothelial cell cord-like pattern and primary hepatocytes using the dECM gBioink. The fabricated lobule structure exhibited excellent hepatic functionalities and dose-dependent responses to hepatotoxic drugs. These results demonstrated that the gelatin mixture can significantly improve the printability and mechanical properties of the liver dECM materials while maintaining good cytocompatibility. This novel liver dECM gBioink with enhanced 3D printability and resolution can be used as an advanced tool for engineering highly functional liver tissues.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An overview of tissue and whole organ decellularization processes
Crapo, P. M., Gilbert, T. W., & Badylak, S. F. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.057 · Cited by 3,591
Godoy, P., Hewitt, N. J., Albrecht, U., Andersen, M. E., Ansari, N., Bhattacharya, S., Bode, J. G., Bolleyn, J., Borner, C., Böttger, J., et al. (2013) · Archives of Toxicology · doi:10.1007/s00204-013-1078-5 · Cited by 1,280 · cited 1×
“Therefore, conventional liver dECM bioinks have low 2D/3D printability, making it challenging to print a biomimetic cellular construct using them [23,24].”
BackgroundSkardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428 · cited 1×
“[42] demonstrated that the viability of primary hepatocytes could be greatly enhanced using dECM materials.”
BackgroundSelf-citationSackett, S. D., Tremmel, D. M., Ma, F., Feeney, A. K., Maguire, R. M., Brown, M. E., Zhou, Y., Li, X., O’Brien, C., Li, L., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-28857-1 · Cited by 269
Assessing Porcine Liver-Derived Biomatrix for Hepatic Tissue Engineering
Lin, P., Chan, W. C. W., Badylak, S. F., & Bhatia, S. N. (2004) · Tissue Engineering · doi:10.1089/ten.2004.10.1046 · Cited by 236 · cited 1×
“[41] demonstrated that liver-derived dECM sheets provide an excellent environment for maintaining the in vitro hepatic function of primary hepatocytes.”
BackgroundLee, J. S., Shin, J., Park, H.-M., Kim, Y.-G., Kim, B.-G., Oh, J.-W., & Cho, S.-W. (2014) · Biomacromolecules · doi:10.1021/bm4015039 · Cited by 236
Das, S., Kim, S.-W., Choi, Y.-J., Lee, S., Lee, S.-H., Kong, J.-S., Park, H.-J., Cho, D.-W., & Jang, J. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.026 · Cited by 150
Directing the growth and alignment of biliary epithelium within extracellular matrix hydrogels
Lewis, P. L., Yan, M., Su, J., & Shah, R. N. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.039 · Cited by 61
Jeong, W., Kim, M. K., & Kang, H.-W. (2021) · Journal of Tissue Engineering · doi:10.1177/2041731421997091 · Cited by 53 · cited 1×
“Consequently, liver dECM materials have received considerable attention because they are known to adequately support the maintenance of viability and functionality of primary hepatocytes in vitro culture [12,39,40].”
BackgroundSelf-citation
Cited by
Liver click dECM hydrogels for engineering hepatic microenvironments
Milton, L. A., Davern, J. W., Hipwood, L., Chaves, J. C. S., McGovern, J., Broszczak, D., Hutmacher, D. W., Meinert, C., & Toh, Y.-C. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2024.06.037 · Cited by 31
Bhatt, S., Krishnakumar, J., Mounica, K. L., & Nune, M. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400451 · Cited by 6
Xu, Z.-Y., Wang, M., Shi, J.-Y., Liu, Y., Yu, C., Zhang, X.-Y., Zhang, C.-W., He, Q.-F., Pan, C., Zhou, J., et al. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101700 · Cited by 5
“Also, long-term monitoring is necessary to confirm that organoid transplantation following reprogramming does not elevate the risk of cancer [8,9].”
Majidi, Z., Sarvi, M. M., Rajabi, M. A., Firouzian, H., Seyhoun, I., & Majidi Zolbin, M. (2026) · Regenerative Therapy · doi:10.1016/j.reth.2025.11.006 · Cited by 5
Metadata
- Authors
- Kim, M. K., Jeong, W., & Kang, H.-W.
- Venue
- Journal of Functional Biomaterials
- Publisher
- MDPI AG
- Published
- 2023-08-09
- Volume
- 14
- Issue
- 8
- Pages
- 417
- ISSN
- 2079-4983 (ISSN-L)
- OpenAlex
- W4385707567
- Cited by
- 32
- References
- 9
- FWCI
- 2.35
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Liver dECM–Gelatin Composite Bioink for Precise 3D Printing of Highly Functional Liver Tissues. https://app.cochat.ai/papers/10.3390/jfb14080417
- The paper
- Kim, M. K., Jeong, W., & Kang, H.-W. (2023). Liver dECM–Gelatin Composite Bioink for Precise 3D Printing of Highly Functional Liver Tissues. Journal of Functional Biomaterials. https://doi.org/10.3390/jfb14080417
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.