The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
Combination of Poly(lactic) Acid and Starch for Biodegradable Food Packaging
Open accessAbstract
The massive use of synthetic plastics, in particular in the food packaging area, has a great environmental impact, and alternative more ecologic materials are being required. Poly(lactic) acid (PLA) and starch have been extensively studied as potential replacements for non-degradable petrochemical polymers on the basis of their availability, adequate food contact properties and competitive cost. Nevertheless, both polymers exhibit some drawbacks for packaging uses and need to be adapted to the food packaging requirements. Starch, in particular, is very water sensitive and its film properties are heavily dependent on the moisture content, exhibiting relatively low mechanical resistance. PLA films are very brittle and offer low resistance to oxygen permeation. Their combination as blend or multilayer films could provide properties that are more adequate for packaging purposes on the basis of their complementary characteristics. The main characteristics of PLA and starch in terms of not only the barrier and mechanical properties of their films but also of their combinations, by using blending or multilayer strategies, have been analyzed, identifying components or processes that favor the polymer compatibility and the good performance of the combined materials. The properties of some blends/combinations have been discussed in comparison with those of pure polymer films.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Development of Edible Films and Coatings with Antimicrobial Activity
Campos, C. A., Gerschenson, L. N., & Flores, S. K. (2011) · Food and Bioprocess Technology · doi:10.1007/s11947-010-0434-1 · Cited by 691
Tensile, water vapor barrier and antimicrobial properties of PLA/nanoclay composite films
Rhim, J.-W., Hong, S.-I., & Ha, C.-S. (2009) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2008.02.015 · Cited by 679
Multifunctional nanostructured PLA materials for packaging and tissue engineering
Armentano, I., Bitinis, N., Fortunati, E., Mattioli, S., Rescignano, N., Verdejo, R., Lopez-Manchado, M. A., & Kenny, J. M. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.010 · Cited by 645
Edible and Biodegradable Starch Films: A Review
Jiménez, A., Fabra, M. J., Talens, P., & Chiralt, A. (2012) · Food and Bioprocess Technology · doi:10.1007/s11947-012-0835-4 · Cited by 607
Self-citationThermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
Morphology and properties of compatibilized polylactide/thermoplastic starch blends
Huneault, M. A., & Li, H. (2007) · Polymer · doi:10.1016/j.polymer.2006.11.023 · Cited by 506
The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid)
Ljungberg, N., & Wesslén, B. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11077 · Cited by 423
Bionanocomposite films based on plasticized PLA–PHB/cellulose nanocrystal blends
Arrieta, M. P., Fortunati, E., Dominici, F., López, J., & Kenny, J. M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.056 · Cited by 360
Plasticized Waxy Maize Starch: Effect of Polyols and Relative Humidity on Material Properties
Mathew, A. P., & Dufresne, A. (2002) · Biomacromolecules · doi:10.1021/bm020065p · Cited by 310
The effect of plasticizers on thermoplastic starch compositions obtained by melt processing
ROZ, A., CARVALHO, A., GANDINI, A., & CURVELO, A. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.09.017 · Cited by 300
Souza, A. C., Goto, G. E. O., Mainardi, J. A., Coelho, A. C. V., & Tadini, C. C. (2013) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2013.06.017 · Cited by 299
Soy protein – Poly (lactic acid) bilayer films as biodegradable material for active food packaging
González, A., & Alvarez Igarzabal, C. I. (2013) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.03.010 · Cited by 299
Ren, J., Fu, H., Ren, T., & Yuan, W. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.01.024 · Cited by 279
Poly(Lactic Acid)-Based Biomaterials: Synthesis, Modification and Applications
Xiao, L., Wang, B., Yang, G., & Gauthier, M. (2012) · Biomedical Science, Engineering and Technology · doi:10.5772/23927 · Cited by 277
Modification of poly(L‐lactides) by blending: mechanical and hydrolytic behavior
Hiljanen‐Vainio, M., Varpomaa, P., Seppälä, J., & Törmälä, P. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970427 · Cited by 249 · cited 1×
“Despite its strong resistance (tensile strength from 17 to 74 MPa) [9,10], it is very brittle, with less than 10% of elongation at break [11,12].”
BackgroundTransparent Films Based on PLA and Montmorillonite with Tunable Oxygen Barrier Properties
Svagan, A. J., Åkesson, A., Cárdenas, M., Bulut, S., Knudsen, J. C., Risbo, J., & Plackett, D. (2012) · Biomacromolecules · doi:10.1021/bm201438m · Cited by 244
Teixeira, E. D. M., Curvelo, A. A. S., Corrêa, A. C., Marconcini, J. M., Glenn, G. M., & Mattoso, L. H. C. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.11.036 · Cited by 222
Xiong, Z., Yang, Y., Feng, J., Zhang, X., Zhang, C., Tang, Z., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.09.007 · Cited by 222
Influence of formamide and water on the properties of thermoplastic starch/poly(lactic acid) blends
Wang, N., Yu, J., Chang, P. R., & Ma, X. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.025 · Cited by 221
Effects of chitosan on the physicochemical and antimicrobial properties of PLA films
Bonilla, J., Fortunati, E., Vargas, M., Chiralt, A., & Kenny, J. M. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.05.026 · Cited by 218
Self-citationThermo-compression of biodegradable thermoplastic corn starch films containing chitin and chitosan
Lopez, O., Garcia, M. A., Villar, M. A., Gentili, A., Rodriguez, M. S., & Albertengo, L. (2014) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2014.01.024 · Cited by 217
Wang, X., Du, Y., & Luo, J. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/6/065707 · Cited by 206
Development and characterization of sugar palm starch and poly(lactic acid) bilayer films
Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.051 · Cited by 197
Shirai, M. A., Grossmann, M. V. E., Mali, S., Yamashita, F., Garcia, P. S., & Müller, C. M. O. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.09.038 · Cited by 189
Chieng, B. W., Ibrahim, N. A., Yunus, W. M. Z. W., & Hussein, M. Z. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39742 · Cited by 188
Thermoplastic starch films reinforced with talc nanoparticles
Castillo, L., López, O., López, C., Zaritzky, N., García, M. A., Barbosa, S., & Villar, M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.026 · Cited by 185
Muller, J., González-Martínez, C., & Chiralt, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.07.019 · Cited by 172
Self-citationWang, H., Sun, X., & Seib, P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10457 · Cited by 170
Choi, K.-M., Choi, M.-C., Han, D.-H., Park, T.-S., & Ha, C.-S. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.05.027 · Cited by 168
Starch: Major Sources, Properties and Applications as Thermoplastic Materials
Carvalho, A. J. F. (2008) · Elsevier eBooks · doi:10.1016/b978-0-08-045316-3.00015-6 · Cited by 164
B., A., Suin, S., & Khatua, B. B. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.024 · Cited by 163
Grafting of maleic anhydride on poly(L-lactic acid). Effects on physical and mechanical properties
Hwang, S. W., Lee, S. B., Lee, C. K., Lee, J. Y., Shim, J. K., Selke, S. E. M., Soto-Valdez, H., Matuana, L., Rubino, M., & Auras, R. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2011.12.005 · Cited by 162
Thomas, D. J., & Atwell, W. A. (1999) · AACC International eBooks · doi:10.1094/1891127012 · Cited by 159
Rhim, J., Lee, J., & Ng, P. K. W. (2005) · LWT · doi:10.1016/j.lwt.2005.10.002 · Cited by 152
Antimicrobial PLA films from environment friendly additives
Turalija, M., Bischof, S., Budimir, A., & Gaan, S. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.07.017 · Cited by 149
Coltelli, M., Maggiore, I. D., Bertoldo, M., Signori, F., Bronco, S., & Ciardelli, F. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28512 · Cited by 137
Development and characterization of bilayer films of FucoPol and chitosan
Ferreira, A. S., Torres, C. A. V., Freitas, F., Sevrin, C., Grandfils, C., Reis, M. A. M., Alves, V. D., & Coelhoso, I. M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.089 · Cited by 131
Xiong, Z., Li, C., Ma, S., Feng, J., Yang, Y., Zhang, R., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.054 · Cited by 130
Qin, Y., Liu, D., Wu, Y. Q., Yuan, M., Li, L., & Yang, J. (2014) · Postharvest Biology and Technology · doi:10.1016/j.postharvbio.2014.07.018 · Cited by 129
Pluta, M., Paul, M., Alexandre, M., & Dubois, P. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20694 · Cited by 127
Yokesahachart, C., & Yoksan, R. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.07.020 · Cited by 126
Sustainable use of cassava ( Manihot esculenta ) roots as raw material for biocomposites development
Versino, F., López, O. V., & García, M. A. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.11.054 · Cited by 124
Wang, N., Yu, J., Chang, P. R., & Ma, X. (2007) · Starch - Stärke · doi:10.1002/star.200700617 · Cited by 121
Flax fibre reinforced PLA/TPS biocomposites flame retarded with multifunctional additive system
Bocz, K., Szolnoki, B., Marosi, A., Tábi, T., Władyka‐Przybylak, M., & Marosi, G. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.10.025 · Cited by 116
Properties of starch–hydroxypropyl methylcellulose based films obtained by compression molding
Ortega‐Toro, R., Jiménez, A., Talens, P., & Chiralt, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.059 · Cited by 116
Self-citationFormamide as the plasticizer for thermoplastic starch
Ma, X., & Yu, J. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20628 · Cited by 115
Improved flexibility of thermally stable poly-lactic acid (PLA)
Hughes, J., Thomas, R., Byun, Y., & Whiteside, S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.11.078 · Cited by 114
Ahmed, J., Hiremath, N., & Jacob, H. (2016) · Journal of Food Science · doi:10.1111/1750-3841.13193 · Cited by 113
Preparation and Characterization of Poly(Lactic Acid)‐g‐Maleic Anhydride + Starch Blends
Orozco, V. H., Brostow, W., Chonkaew, W., & López, B. L. (2009) · Macromolecular Symposia · doi:10.1002/masy.200950309 · Cited by 111
Characterization of antimicrobial polylactic acid based films
Erdohan, Z. Ö., ÇAM, B. A., & Turhan, K. N. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.05.043 · Cited by 101
Thermal degradation and physical aging of poly(lactic acid) and its blends with starch
Acioli‐Moura, R., & Sun, X. S. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21019 · Cited by 99
Active bilayer films of thermoplastic starch and polycaprolactone obtained by compression molding
Ortega‐Toro, R., Morey, I., Talens, P., & Chiralt, A. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.080 · Cited by 98
Self-citationXiong, Z., Zhang, L., Ma, S., Yang, Y., Zhang, C., Tang, Z., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.038 · Cited by 97
The properties of antimicrobial films derived from poly(lactic acid)/starch/chitosan blended matrix
Bie, P., Liu, P., Yu, L. F., Li, X., Chen, L., & Xie, F. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.07.004 · Cited by 96
Silane modified starch for compatible reactive blend with poly(lactic acid)
Jariyasakoolroj, P., & Chirachanchai, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.018 · Cited by 96
The Role of Plasticization in Starch Granule Assembly
Perry, P. A., & Donald, A. M. (2000) · Biomacromolecules · doi:10.1021/bm0055145 · Cited by 91
Xiong, Z., Ma, S., Fan, L., Tang, Z., Zhang, R., Na, H., & Zhu, J. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.01.007 · Cited by 91
Isothermal crystallization kinetics of thermoplastic starch/poly(lactic acid) composites
Cai, J., Liu, M., Wang, L., Yao, K., Li, S., & Xiong, H. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.05.044 · Cited by 89
Three‐layer sheets based on gelatin and poly(lactic acid), part 1: Preparation and properties
Martucci, J. F., & Ruseckaite, R. A. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32751 · Cited by 89
Abdillahi, H., Chabrat, E., Rouilly, A., & Rigal, L. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.06.028 · Cited by 82
Impact of corona treatment on PLA film properties
Rocca-Smith, J. R., Karbowiak, T., Marcuzzo, E., Sensidoni, A., Piasente, F., Champion, D., Heinz, O., Vitry, P., Bourillot, E., Lesniewska, É., et al. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.03.020 · Cited by 81
Qin, Y., Yang, J., & Xue, J. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8671-8 · Cited by 79
Antioxidants Release from Solvent-Cast PLA Film: Investigation of PLA Antioxidant-Active Packaging
Jamshidian, M., Arab‐Tehrany, E., & Desobry, S. (2012) · Food and Bioprocess Technology · doi:10.1007/s11947-012-0830-9 · Cited by 78
Preparation and characterization of dry method esterified starch/polylactic acid composite materials
Zuo, Y., Gu, J., Yang, L., Qiao, Z., Tan, H., & Zhang, Y. (2013) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2013.11.026 · Cited by 71
Fortunati, E., Puglia, D., Iannoni, A., Terenzi, A., Kenny, J. M., & Torre, L. (2017) · Materials · doi:10.3390/ma10070809 · Cited by 71
Thermoplastic starch/poly(lactic acid) sheets coated with cross-linked chitosan
Soares, F. C., Yamashita, F., Müller, C. M. O., & Pires, A. T. N. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.09.005 · Cited by 70
Inducing PLA/starch compatibility through butyl-etherification of waxy and high amylose starch
Wokadala, O. C., Emmambux, M. N., & Ray, S. S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.05.095 · Cited by 69
Muller, J., Jiménez, A., González‐Martínez, C., & Chiralt, A. (2016) · Polymer International · doi:10.1002/pi.5142 · Cited by 58
Self-citationPhetwarotai, W., Potiyaraj, P., & Aht‐Ong, D. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36736 · Cited by 55
Fortunati, E., Aluigi, A., Armentano, I., Morena, F., Emiliani, C., Martino, S., Santulli, C., Torre, L., Kenny, J. M., & Puglia, D. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.11.007 · Cited by 52
Pivsa‐Art, W., Pavasupree, S., O-Charoen, N., Insuan, U., Jailak, P., & Pivsa‐Art, S. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.09.068 · Cited by 51
Antimicrobial beeswax coated polylactide films with silver control release capacity
Martínez‐Abad, A., Lagaron, J. M., & Ocio, M. J. (2014) · International Journal of Food Microbiology · doi:10.1016/j.ijfoodmicro.2013.12.028 · Cited by 50
Novel polyethylene glycol-based polyester-toughened polylactide
Gui, Z., Xu, Y., Gao, Y. L., Lu, C., & Cheng, S. (2011) · Materials Letters · doi:10.1016/j.matlet.2011.12.045 · Cited by 50
Requena, R., Jiménez, A., Vargas, M., & Chiralt, A. (2016) · Polymer International · doi:10.1002/pi.5091 · Cited by 44
Self-citationToughening Poly(Lactic Acid) and Aiding the Melt-compounding with Bio-sourced Plasticizers
Tee, Y. B., Talib, R. A., Abdan, K., Chin, N. L., Basha, R. K., & Yunos, K. F. M. (2014) · Agriculture and Agricultural Science Procedia · doi:10.1016/j.aaspro.2014.11.041 · Cited by 39
Bolay, N. L., Lamure, A., Leis, N. G., & Subhani, A. (2012) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2012.03.005 · Cited by 32
Cited by
A review on poly lactic acid (PLA) as a biodegradable polymer
Taib, N.-A. A. B., Rahman, M. R., Huda, D., Kuok, K. K., Hamdan, S., Bakri, M. K. B., Julaihi, M. R. M. B., & Khan, A. (2023) · Polymer Bulletin · doi:10.1007/s00289-022-04160-y · Cited by 854
Chitosan based nanocomposite films and coatings: Emerging antimicrobial food packaging alternatives
Kumar, S., Mukherjee, A., & Dutta, J. (2020) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2020.01.002 · Cited by 850
Ncube, L. K., Ude, A. U., Ogunmuyiwa, E. N., Zulkifli, R., & Beas, I. N. (2020) · Materials · doi:10.3390/ma13214994 · Cited by 736
An overview of biodegradable packaging in food industry
Shaikh, S., Yaqoob, M., & Aggarwal, P. (2021) · Current Research in Food Science · doi:10.1016/j.crfs.2021.07.005 · Cited by 561
Biodegradable polymers and green-based antimicrobial packaging materials: A mini-review
Zhong, Y., Godwin, P., Jin, Y., & Xiao, H. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2019.11.002 · Cited by 509
Metadata
- Authors
- Muller, J., González-Martínez, C., & Chiralt, A.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2017-08-15
- Volume
- 10
- Issue
- 8
- Pages
- 952
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2747469940
- Cited by
- 447
- References
- 79
- FWCI
- 13.01
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.