The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
The Use of Municipal Solid Waste Incineration Ash in Various Building Materials: A Belgian Point of View
Open accessAbstract
Huge amounts of waste are being generated, and even though the incineration process reduces the mass and volume of waste to a large extent, massive amounts of residues still remain. On average, out of 1.3 billion tons of municipal solid wastes generated per year, around 130 and 2.1 million tons are incinerated in the world and in Belgium, respectively. Around 400 kT of bottom ash residues are generated in Flanders, out of which only 102 kT are utilized here, and the rest is exported or landfilled due to non-conformity to environmental regulations. Landfilling makes the valuable resources in the residues unavailable and results in more primary raw materials being used, increasing mining and related hazards. Identifying and employing the right pre-treatment technique for the highest value application is the key to attaining a circular economy. We reviewed the present pre-treatment and utilization scenarios in Belgium, and the advancements in research around the world for realization of maximum utilization are reported in this paper. Uses of the material in the cement industry as a binder and cement raw meal replacement are identified as possible effective utilization options for large quantities of bottom ash. Pre-treatment techniques that could facilitate this use are also discussed. With all the research evidence available, there is now a need for combined efforts from incineration and the cement industry for technical and economic optimization of the process flow.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
Municipal solid waste (MSW) as a renewable source of energy: Current and future practices in China
Cheng, H., & Hu, Y. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.040 · Cited by 783
Immobilisation of heavy metal in cement-based solidification/stabilisation: A review
Chen, Q. Y., Tyrer, M., Hills, C. D., Yang, X. M., & Carey, P. (2009) · Waste Management · doi:10.1016/j.wasman.2008.01.019 · Cited by 705
An overview of recovery of metals from slags
Shen, H., & Forssberg, E. (2003) · Waste Management · doi:10.1016/s0956-053x(02)00164-2 · Cited by 592
Shi, H.-S., & Kan, L.-L. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.08.077 · Cited by 288
Use of incinerator bottom ash in concrete
Pera, J., Coutaz, L., Ambroise, J., & Chababbet, M. (1997) · Cement and Concrete Research · doi:10.1016/s0008-8846(96)00193-7 · Cited by 264
Factors Determining the Element Behavior in Municipal Solid Waste Incinerators. 1. Field Studies
Belevi, H., & Moench, H. (2000) · Environmental Science & Technology · doi:10.1021/es991078m · Cited by 261
Luna Galiano, Y., Fernández Pereira, C., & Vale, J. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.08.127 · Cited by 257
Carbonation of MSWI-bottom ash to decrease heavy metal leaching, in view of recycling
Van Gerven, T., Van Keer, E., Arickx, S., Jaspers, M., Wauters, G., & Vandecasteele, C. (2005) · Waste Management · doi:10.1016/j.wasman.2004.07.008 · Cited by 233
Municipal Solid Waste Combustion Ash: State-of-the-Knowledge
Wiles, C. C. (2020) · Municipal Solid Wastes · doi:10.1201/9781003075639-12 · Cited by 216
Investigation of accelerated and natural carbonation of MSWI fly ash with a high content of Ca
Wang, L., Jin, Y., & Nie, Y. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.09.055 · Cited by 207
Kikuchi, R. (2001) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(00)00077-x · Cited by 180
Understanding the chemical and mineralogical properties of the inorganic portion of MSWI bottom ash
Bayuseno, A. P., & Schmahl, W. W. (2010) · Waste Management · doi:10.1016/j.wasman.2010.03.010 · Cited by 178
Sources and fate of PCDDs and PCDFs: An overview
Hutzinger, O., Blumich, M. J., v.d.Berg, M., & Olie, K. (1985) · Chemosphere · doi:10.1016/0045-6535(85)90167-5 · Cited by 170
Manufacture of hybrid cements with fly ash and bottom ash from a municipal solid waste incinerator
García-Lodeiro, I., Taboada, V. C., Fernández‐Jiménez, A., & Palomo, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.079 · Cited by 165
Silva, R. V., de Brito, J., Lynn, C. J., & Dhir, R. K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.06.043 · Cited by 164
Accelerated carbonation for treatment of MSWI bottom ash
Arickx, S., Van Gerven, T., & Vandecasteele, C. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.01.059 · Cited by 157
Piantone, P., Bodénan, F., & Chatelet-Snidaro, L. (2004) · Applied Geochemistry · doi:10.1016/j.apgeochem.2004.05.006 · Cited by 157
Krammart, P., & Tangtermsirikul, S. (2004) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2004.04.014 · Cited by 140
Belevi, H., & Langmeier, M. (2000) · Environmental Science & Technology · doi:10.1021/es991079e · Cited by 137
Rémond, S., Pimienta, P., & Bentz, D. P. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00674-3 · Cited by 134
Antimony leaching from uncarbonated and carbonated MSWI bottom ash
Cornelis, G., Gerven, T. V., & Vandecasteele, C. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.04.048 · Cited by 126
Wang, L., Jin, Y., Nie, Y., & Li, R. (2010) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2010.06.006 · Cited by 123
Properties and microstructure of sintered incinerator bottom ash
Bethanis, S., Cheeseman, C. R., & Sollars, C. J. (2002) · Ceramics International · doi:10.1016/s0272-8842(02)00068-8 · Cited by 112
Extraction of metals from municipal solid waste incinerator fly ash by hydrothermal process
Zhang, F., & Itoh, H. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.12.052 · Cited by 107
Gao, X., Wang, W., Ye, T.-M., Wang, F., & Lan, Y. (2007) · Journal of Environmental Management · doi:10.1016/j.jenvman.2007.02.008 · Cited by 107
Hwang, C., Bui, L. A. T., Lin, K., & Lo, C.-T. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.07.004 · Cited by 105
Song, G.-J., Kim, K.-H., Seo, Y., et al. (2003) · Waste Management · doi:10.1016/s0956-053x(03)00073-4 · Cited by 105
Combustion and Incineration Processes
Niessen, W. R. (2002) · CRC Press eBooks · doi:10.1201/9780203908365 · Cited by 102
Replacement of raw mix in cement production by municipal solid waste incineration ash
Shih, P.-H., Chang, J., & Chiang, L. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00206-0 · Cited by 101
Management of incinerator residues in Flanders (Belgium) and in neighbouring countries. A comparison
Gerven, T. V., Geysen, D., Stoffels, L., Jaspers, M., Wauters, G., & Vandecasteele, C. (2004) · Waste Management · doi:10.1016/j.wasman.2004.09.002 · Cited by 99
Formation Mechanism of Aluminum Hydroxide Polymorphs
Violante, A., & Huang, P. (1993) · Clays and Clay Minerals · doi:10.1346/ccmn.1993.0410509 · Cited by 94
Glass-ceramics from filter dusts from waste incinerators
Boccaccini, A. R., Köpf, M., & Stumpfe, W. (1995) · Ceramics International · doi:10.1016/0272-8842(95)99787-c · Cited by 89
Alba, N., Gassó, S., Lacorte, T., & Baldasano, J. M. (1997) · Journal of the Air & Waste Management Association · doi:10.1080/10473289.1997.10464059 · Cited by 89
Optimizing the APC residue washing process to minimize the release of chloride and heavy metals
Chimenos, J. M., Fernández, A. I., Cervantes, A. B., Miralles, L., Fernández, M. A., & Espiell, F. (2005) · Waste Management · doi:10.1016/j.wasman.2004.12.014 · Cited by 89
Pedersen, A. J. (2002) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(02)00138-3 · Cited by 88
Hydrothermal processing of MSWI Fly Ash-towards new stable minerals and fixation of heavy metals
Bayuseno, A. P., Schmahl, W. W., & Müllejans, T. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.12.119 · Cited by 87
Calcium phosphate stabilization of fly ash with chloride extraction
Nzihou, A., & Sharrock, P. (2002) · Waste Management · doi:10.1016/s0956-053x(01)00074-5 · Cited by 86
Bosio, A., Zacco, A., Borgese, L., Rodella, N., Colombi, P., Benassi, L., Depero, L. E., & Bontempi, E. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.080 · Cited by 82
Waste silica sources as heavy metal stabilizers for municipal solid waste incineration fly ash
Rodella, N., Bosio, A., Dalipi, R., Zacco, A., Borgese, L., Depero, L. E., & Bontempi, E. (2014) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2014.04.006 · Cited by 75
Chen, C.-G., Sun, C.-J., Gau, S.-H., Wu, C.-W., & Chen, Y.-L. (2013) · Waste Management · doi:10.1016/j.wasman.2012.12.014 · Cited by 67
Integrated municipal solid waste treatment using a grate furnace incinerator: The Indaver case
Vandecasteele, C., Wauters, G., Arickx, S., Jaspers, M., & Gerven, T. V. (2006) · Waste Management · doi:10.1016/j.wasman.2006.08.005 · Cited by 63
Pre-Treatment of MSWI fly ash for useful application
Mulder, E. (1996) · Waste Management · doi:10.1016/s0956-053x(96)00040-2 · Cited by 62
Thipse, S. S., Schoenitz, M., & Dreizin, E. L. (2002) · Fuel Processing Technology · doi:10.1016/s0378-3820(02)00007-3 · Cited by 60
Wu, S., Zhou, J., Pan, Y., Zhang, J., Zhang, L., Ohtsuka, N., Motegi, M., Yonemochi, S., Oh, K., Hosono, S., et al. (2016) · Waste Management · doi:10.1016/j.wasman.2016.01.038 · Cited by 60
Chromium Release from Waste Incineration Air-Pollution-Control Residues
Astrup, T. F., Rosenblad, C., Trapp, S., & Christensen, T. H. (2005) · Environmental Science & Technology · doi:10.1021/es049346q · Cited by 57
Jing, Z., Fan, X., Zhou, L., Fan, J., Zhang, Y. S., Pan, X., & Ishida, E. H. (2013) · Waste Management · doi:10.1016/j.wasman.2013.01.038 · Cited by 53
Properties of municipal solid waste incineration ashes with respect to their separation temperature
Keppert, M., Pavlík, Z., Tydlitát, V., Volfová, P., Švarcová, S., Šyc, M., & Černý, R. (2012) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x12448513 · Cited by 50
Stabilization of heavy metals in fly ashes from municipal solid waste incineration via wet milling
Wang, W., Gao, X., Li, T., Cheng, S., Yang, H., & Qiao, Y. (2017) · Fuel · doi:10.1016/j.fuel.2017.11.045 · Cited by 49
The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture
Polettini, A., Pomi, R., & Carcani, G. (2004) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2004.07.004 · Cited by 45
Wet extraction of heavy metals and chloride from MSWI and straw combustion fly ashes
del Toro, M. A., Calmano, W., & Ecke, H. (2009) · Waste Management · doi:10.1016/j.wasman.2009.04.013 · Cited by 40
Suppression of dioxins after the post-combustion zone of MSWIs
Zhan, M., Chen, T., Lin, X., Fu, J., Li, X., Yan, J., & Buekens, A. G. (2016) · Waste Management · doi:10.1016/j.wasman.2016.04.031 · Cited by 39
MSWI boiler fly ashes: Magnetic separation for material recovery
Boom, A. D., Degrez, M., Hubaux, P., & Lucion, C. (2011) · Waste Management · doi:10.1016/j.wasman.2011.01.002 · Cited by 33
Sawell, S. E., Chandler, A. J., Eighmy, T. T., Hartlén, J., Hjelmar, O., Kosson, D. S., van der Sloot, H., & Vehlow, J. (1995) · Biomass and Bioenergy · doi:10.1016/0961-9534(95)00105-0 · Cited by 29
Effect of the clinker composition on the threshold limits for Cu, Sn or Zn
Gineys, N., Aouad, G., Sorrentino, F., & Damidot, D. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.05.002 · Cited by 18
Lin, K., Lin, D.-F., Wang, W.-J., Chang, C.-C., & Lee, T. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.088 · Cited by 17
Is there a strong dioxin:Chlorine link in commercial scale systems?
Rigo, H. G., & Chandler, A. J. (1998) · Chemosphere · doi:10.1016/s0045-6535(98)00267-7 · Cited by 14
Cited by
Environmental impacts and decarbonization strategies in the cement and concrete industries
Habert, G., Miller, S. A., John, V. M., Provis, J. L., Favier, A., Horvath, A., & Scrivener, K. L. (2020) · Nature Reviews Earth & Environment · doi:10.1038/s43017-020-0093-3 · Cited by 1,572
Supplementary cementitious materials: New sources, characterization, and performance insights
Juenger, M. C. G., Snellings, R., & Bernal, S. A. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.008 · Cited by 1,260
Self-citationFuture and emerging supplementary cementitious materials
Snellings, R., Suraneni, P., & Skibsted, J. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2023.107199 · Cited by 606
Self-citationChromium Pollution in European Water, Sources, Health Risk, and Remediation Strategies: An Overview
Tumolo, M., Ancona, V., De Paola, D., Losacco, D., Campanale, C., Massarelli, C., & Uricchio, V. F. (2020) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph17155438 · Cited by 590
Zhang, Y., Wang, L., Chen, L., Ma, B., Zhang, Y., Ni, W., & Tsang, D. C. W. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.125132 · Cited by 532
Metadata
- Authors
- Joseph, A., Snellings, R., Van den Heede, P., Matthys, S., & De Belie, N.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2018-01-16
- Volume
- 11
- Issue
- 1
- Pages
- 141
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2787645682
- Cited by
- 269
- References
- 57
- FWCI
- 20.93
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.