The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Artificial Intelligence Approaches for Prediction of Compressive Strength of Geopolymer Concrete
Open accessAbstract
Geopolymer concrete (GPC) has been used as a partial replacement of Portland cement concrete (PCC) in various construction applications. In this paper, two artificial intelligence approaches, namely adaptive neuro fuzzy inference (ANFIS) and artificial neural network (ANN), were used to predict the compressive strength of GPC, where coarse and fine waste steel slag were used as aggregates. The prepared mixtures contained fly ash, sodium hydroxide in solid state, sodium silicate solution, coarse and fine steel slag aggregates as well as water, in which four variables (fly ash, sodium hydroxide, sodium silicate solution, and water) were used as input parameters for modeling. A total number of 210 samples were prepared with target-specified compressive strength at standard age of 28 days of 25, 35, and 45 MPa. Such values were obtained and used as targets for the two AI prediction tools. Evaluation of the model’s performance was achieved via criteria such as mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination (R2). The results showed that both ANN and ANFIS models have strong potential for predicting the compressive strength of GPC but ANFIS (MAE = 1.655 MPa, RMSE = 2.265 MPa, and R2 = 0.879) is better than ANN (MAE = 1.989 MPa, RMSE = 2.423 MPa, and R2 = 0.851). Sensitivity analysis was then carried out, and it was found that reducing one input parameter could only make a small change to the prediction performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep learning in neural networks: an overview
Schmidhuber, J. (2015) · Neural Networks · doi:10.1016/j.neunet.2014.09.003 · Cited by 18,570
Chai, T., & Draxler, R. R. (2014) · Geoscientific Model Development · doi:10.5194/gmd-7-1247-2014 · Cited by 7,178 · cited 3×
“These measures can be calculated by the following equations [55]:”
BackgroundMethodInfluentialGeopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 995
Durability evaluation of geopolymer and conventional concretes
Albitar, M., Mohamed Ali, M. S., Visintin, P., & Drechsler, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.056 · Cited by 629
Chemical stability of cementitious materials based on metakaolin
Palomo, A., Blanco-Varela, M. T., Granizo, M. L., Puertas, F., Vazquez, T., & Grutzeck, M. W. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00074-5 · Cited by 608
Topçu, İ. B., & Sarıdemir, M. (2008) · Computational Materials Science · doi:10.1016/j.commatsci.2007.04.009 · Cited by 531
Cited by
Machine learning prediction of mechanical properties of concrete: Critical review
Ben Chaabene, W., Flah, M., & Nehdi, M. L. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119889 · Cited by 779
Ekanayake, I. U., Meddage, D. P. P., & Rathnayake, U. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01059 · Cited by 498
Mohtasham Moein, M., Saradar, A., Rahmati, K., Ghasemzadeh Mousavinejad, S. H., Bristow, J., Aramali, V., & Karakouzian, M. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105444 · Cited by 391
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Nguyen, K. T., Nguyen, Q. D., Le, T. A., Shin, J., & Lee, K. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118581 · Cited by 272
Self-citation
Metadata
- Authors
- Dao, D. V., Ly, H.-B., Trinh, S. H., Le, T.-T., & Pham, B. T.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2019-03-25
- Volume
- 12
- Issue
- 6
- Pages
- 983
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2923370583
- Cited by
- 344
- References
- 35
- FWCI
- 28.78
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Artificial Intelligence Approaches for Prediction of Compressive Strength of Geopolymer Concrete. https://app.cochat.ai/papers/10.3390/ma12060983
- The paper
- Dao, D. V., Ly, H.-B., Trinh, S. H., Le, T.-T., & Pham, B. T. (2019). Artificial Intelligence Approaches for Prediction of Compressive Strength of Geopolymer Concrete. Materials. https://doi.org/10.3390/ma12060983
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.