The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Efficient Adsorption of Lead (II) from Aqueous Phase Solutions Using Polypyrrole-Based Activated Carbon
Open accessAbstract
In this study, polypyrrole-based activated carbon was prepared by the carbonization of polypyrrole at 650 °C for 2 h in the presence of four-times the mass of KOH as a chemical activator. The structural and morphological properties of the product (polypyrrole-based activated carbon (PPyAC4)), analyzed by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and thermogravimetric analysis, support its applicability as an adsorbent. The adsorption characteristics of PPyAC4 were examined through the adsorption of lead ions from aqueous solutions. The influence of various factors, including initial ion concentration, pH, contact time, and adsorbent dose, on the adsorption of Pb2+ was investigated to identify the optimum adsorption conditions. The experimental data fit well to the pseudo-second-order kinetic model (R2 = 0.9997) and the Freundlich isotherm equation (R2 = 0.9950), suggesting a chemisorption pathway. The adsorption capacity was found to increase with increases in time and initial concentration, while it decreased with an increase in adsorbent dose. Additionally, the highest adsorption was attained at pH 5.5. The calculated maximum capacity, qm, determined from the Langmuir model was 50 mg/g.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Pseudo-second order model for sorption processes
Ho, Y. S., & McKay, G. (1999) · Process Biochemistry · doi:10.1016/s0032-9592(98)00112-5 · Cited by 17,497
A review of potentially low-cost sorbents for heavy metals
Bailey, S. E., Olin, T. J., Bricka, R. M., & Adrian, D. D. (1999) · Water Research · doi:10.1016/s0043-1354(98)00475-8 · Cited by 3,027
Pore and solid diffusion models for fixed‐bed adsorbers
Weber, T. W., & Chakravorti, R. K. (1974) · AIChE Journal · doi:10.1002/aic.690200204 · Cited by 2,573
Removal of heavy metals from waters by means of natural zeolites
Blanchard, G., Maunaye, M., & Martin, G. (1984) · Water Research · doi:10.1016/0043-1354(84)90124-6 · Cited by 1,699
Microbial and plant derived biomass for removal of heavy metals from wastewater
Ahluwalia, S. S., & Goyal, D. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2005.12.006 · Cited by 1,586
Heavy metal adsorbents prepared from the modification of cellulose: A review
O’Connell, D. W., Birkinshaw, C., & O’Dwyer, T. F. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2008.01.036 · Cited by 1,299
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Kobya, M., Demirbas, E., Senturk, E., & Ince, M. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.12.005 · Cited by 871
Tea waste as a low cost adsorbent for the removal of Cu and Pb from wastewater
Amarasinghe, B. M. W. P. K., & Williams, R. A. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.01.016 · Cited by 845
Kadirvelu, K. (2001) · Bioresource Technology · doi:10.1016/s0960-8524(00)00072-9 · Cited by 800
Lead adsorption on carbon nanotubes
Li, Y.-H., Wang, S., Wei, J., Zhang, X., Xu, C., Luan, Z., Wu, D., & Wei, B. (2002) · Chemical Physics Letters · doi:10.1016/s0009-2614(02)00502-x · Cited by 706
Gupta, V. K., & Rastogi, A. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.07.028 · Cited by 631
Kinetic and isotherm studies of Cu(II) adsorption onto H3PO4-activated rubber wood sawdust
Kalavathy, M. H., Karthikeyan, T., Rajgopal, S., & Miranda, L. R. (2005) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.05.087 · Cited by 588
Magnetic Chitosan Nanocomposites: A Useful Recyclable Tool for Heavy Metal Ion Removal
Liu, X., Hu, Q., Fang, Z., Zhang, X., & Zhang, B. (2009) · Langmuir · doi:10.1021/la802754t · Cited by 532
Imamoglu, M., & Tekir, O. (2008) · Desalination · doi:10.1016/j.desal.2007.08.011 · Cited by 525
Muhammad Ekramul Mahmud, H. N., Huq, A. K. O., & Yahya, R. B. (2016) · RSC Advances · doi:10.1039/c5ra24358k · Cited by 475
Removal of heavy metal from industrial wastewater using chitosan coated oil palm shell charcoal
Nomanbhay, S. M., & Palanisamy, K. (2005) · Electronic Journal of Biotechnology · doi:10.4067/s0717-34582005000100008 · Cited by 469
Mohanty, K., Jha, M., Meikap, B. C., & Biswas, M. N. (2005) · Chemical Engineering Science · doi:10.1016/j.ces.2004.12.049 · Cited by 394
Removal of heavy metal from industrial wastewater using chitosan coated oil palm shell charcoal
Nomanbhay, S. M., & Palanisamy, K. (2005) · Electronic Journal of Biotechnology · doi:10.2225/vol8-issue1-fulltext-7 · Cited by 378
A study of the removal characteristics of heavy metals from wastewater by low-cost adsorbents
Abdel Salam, O. E., Reiad, N. A., & ElShafei, M. M. (2011) · Journal of Advanced Research · doi:10.1016/j.jare.2011.01.008 · Cited by 377
Lead and nickel removal using Microspora and Lemna minor
Axtell, N. (2003) · Bioresource Technology · doi:10.1016/s0960-8524(03)00034-8 · Cited by 366
Wang, L., Zhang, J., Zhao, R., Li, Y., Li, C., & Zhang, C. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.02.099 · Cited by 346
Huang, Y., Li, S., Chen, J., Zhang, X., & Chen, Y. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2013.12.123 · Cited by 303
Nuhoğlu, Y., & Malkoç, E. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2008.11.016 · Cited by 276
Depci, T., Kul, A. R., & Önal, Y. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.077 · Cited by 275
Biosorption of nickel from protonated rice bran
Zafar, M. N., Nadeem, R., & Hanif, M. A. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.09.055 · Cited by 273
Li, Y., Du, Q., Wang, X., Zhang, P., Wang, D., Wang, Z., & Xia, Y. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.07.063 · Cited by 240
Effect of ZnO loading to activated carbon on Pb(II) adsorption from aqueous solution
Kikuchi, Y., Qian, Q., Machida, M., & Tatsumoto, H. (2006) · Carbon · doi:10.1016/j.carbon.2005.07.040 · Cited by 236
Singh, C. K., Sahu, J. N., Mahalik, K. K., Mohanty, C. R., Mohan, B. R., & Meikap, B. C. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.08.043 · Cited by 225
Adsorption of Pb(II) from aqueous solutions using activated carbon developed from Apricot stone
Mouni, L., Merabet, D., Bouzaza, A., & Belkhiri, L. (2011) · Desalination · doi:10.1016/j.desal.2011.03.038 · Cited by 219
Development of Biochar-based Catalyst for Transesterification of Canola Oil
Yu, J. T., Dehkhoda, A. M., & Ellis, N. (2011) · Energy & Fuels · doi:10.1021/ef100977d · Cited by 188
Deliyanni, E. A., Kyzas, G. Z., Triantafyllidis, K. S., & Matis, K. A. (2015) · Open Chemistry · doi:10.1515/chem-2015-0087 · Cited by 169
Ansari, R., & Mosayebzadeh, Z. (2010) · Journal of the Iranian Chemical Society · doi:10.1007/bf03246019 · Cited by 150
Guo, J. J., Song, Y., Ji, X., Ji, L., Cai, L., Wang, Y., Zhang, H., & Song, W. (2019) · Materials · doi:10.3390/ma12020241 · Cited by 122
Djedidi, Z., Bouda, M., Souissi, M. A., Cheikh, R. B., Mercier, G., Tyagi, R. D., & Blais, J. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.07.144 · Cited by 116
Ali, I. H., Mesfer, M. K. A., Khan, M. I., Danish, M., & Alghamdi, M. M. (2019) · Processes · doi:10.3390/pr7040217 · Cited by 77
Nyairo, W. N., Eker, Y. R., Kowenje, C. O., Akın, İ., Bingöl, H., Tor, A., & Ongeri, D. M. K. (2018) · Separation Science and Technology · doi:10.1080/01496395.2018.1424203 · Cited by 74
Alghamdi, A. A. B., Alshahrani, A., Khdary, N. H., Alharthi, F. A., Alattas, H., & Adil, S. F. (2018) · Materials · doi:10.3390/ma11040578 · Cited by 54
Self-citationZhang, Y., Xue, Q., Li, F., & Dai, J. (2019) · Adsorption Science & Technology · doi:10.1177/0263617418822225 · Cited by 46
Removal of lead (II) from waste water by adsorption.
Yarkandi, N. H. M., & Arabia, S. (2014) · International Journal of Current Microbiology and Applied Sciences · Cited by 35
Boujelben, N., Bouzid, J., & Elouear, Z. (2009) · Adsorption Science & Technology · doi:10.1260/026361709789625252 · Cited by 34
POLYMER ADSORBENT FOR THE REMOVAL OF LEAD IONS FROM AQUEOUS SOLUTION
Mahmud, H. N. M. E., Hosseini, S., & Yahya, R. B. (2014) · Cited by 12
Cited by
Ugwu, E. I., Othmani, A., & Nnaji, C. C. (2022) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-021-03560-3 · Cited by 105
Synthesis of Nano-silica Oxide for Heavy Metal Decontamination from Aqueous Solutions
Meky, N., Salama, E., Soliman, M. F., Naeem, S. G., Ossman, M., & Elsayed, M. (2024) · Water, Air, & Soil Pollution · doi:10.1007/s11270-024-06944-6 · Cited by 23
Metadata
- Authors
- Alghamdi, A. A., Al-Odayni, A.-B., Saeed, W. S., Al-Kahtani, A., Alharthi, F. A., & Aouak, T.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2019-06-24
- Volume
- 12
- Issue
- 12
- Pages
- 2020
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2952316804
- Cited by
- 307
- References
- 43
- FWCI
- 11.80
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.