The DOI matches its Crossref record; 364 of the 364 references it cites were found in a registry or an index.
Building Better Batteries in the Solid State: A Review
Open accessAbstract
Most of the current commercialized lithium batteries employ liquid electrolytes, despite their vulnerability to battery fire hazards, because they avoid the formation of dendrites on the anode side, which is commonly encountered in solid-state batteries. In a review two years ago, we focused on the challenges and issues facing lithium metal for solid-state rechargeable batteries, pointed to the progress made in addressing this drawback, and concluded that a situation could be envisioned where solid-state batteries would again win over liquid batteries for different applications in the near future. However, an additional drawback of solid-state batteries is the lower ionic conductivity of the electrolyte. Therefore, extensive research efforts have been invested in the last few years to overcome this problem, the reward of which has been significant progress. It is the purpose of this review to report these recent works and the state of the art on solid electrolytes. In addition to solid electrolytes stricto sensu, there are other electrolytes that are mainly solids, but with some added liquid. In some cases, the amount of liquid added is only on the microliter scale; the addition of liquid is aimed at only improving the contact between a solid-state electrolyte and an electrode, for instance. In some other cases, the amount of liquid is larger, as in the case of gel polymers. It is also an acceptable solution if the amount of liquid is small enough to maintain the safety of the cell; such cases are also considered in this review. Different chemistries are examined, including not only Li-air, Li–O2, and Li–S, but also sodium-ion batteries, which are also subject to intensive research. The challenges toward commercialization are also considered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–364 of 364
High Ion‐Conducting Solid‐State Composite Electrolytes with Carbon Quantum Dot Nanofillers
Ma, C., Dai, K., Hou, H., Ji, X., Chen, L., Ivey, D. G., & Wei, W. (2018) · Advanced Science · doi:10.1002/advs.201700996 · Cited by 221
Yu, Z., Shang, S., Seo, J., Wang, D., Luo, X., Huang, Q., Chen, S., Lu, J. B., Li, X., Liu, Z., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605561 · Cited by 220
Oh, D. Y., Nam, Y. J., Park, K. H., Jung, S. H., Kim, K. T., Ha, A. R., & Jung, Y. S. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802927 · Cited by 217
Flexible Batteries: From Mechanics to Devices
Fu, K. K., Cheng, J., Li, T., & Hu, L. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00401 · Cited by 216
All-in-one improvement toward Li6PS5Br-Based solid electrolytes triggered by compositional tune
Zhang, Z., Zhang, L., Yan, X., Wang, H., Liu, Y., Yu, C., Cao, X., van Eijck, L., & Wen, B. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.11.016 · Cited by 215
Characterization of NaX (X: TFSI, FSI) – PEO based solid polymer electrolytes for sodium batteries
Boschin, A., & Johansson, P. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.03.228 · Cited by 214
Shin, B. R., Nam, Y. J., Oh, D. Y., Kim, D. H., Kim, J. W., & Jung, Y. S. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.08.139 · Cited by 214
Nguyen, H.-D., Kim, G.-T., Shi, J., Paillard, E., Judeinstein, P., Lyonnard, S., Bresser, D., & Iojoiu, C. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02093k · Cited by 214
Allen, C. J., Hwang, J., Kautz, R., Mukerjee, S., Plichta, E. J., Hendrickson, M. A., & Abraham, K. M. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp306718v · Cited by 209
Yu, X., & Manthiram, A. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00460 · Cited by 209
Novel Li3ClO based glasses with superionic properties for lithium batteries
Braga, M. H., Ferreira, J. A., Stockhausen, V., Oliveira, J. E., & El-Azab, A. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta15087a · Cited by 208
Mauger, A., Julien, C. M., Paolella, A., Armand, M., & Zaghib, K. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.07.001 · Cited by 207
Self-citationUnderstanding the Chemical Stability of Polymers for Lithium–Air Batteries
Amanchukwu, C. V., Harding, J. R., Shao-Horn, Y., & Hammond, P. T. (2015) · Chemistry of Materials · doi:10.1021/cm5040003 · Cited by 205
Judez, X., Zhang, H., Li, C., González-Marcos, J. A., Zhou, Z., Armand, M., & Rodriguez-Martinez, L. M. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00593 · Cited by 203
Self-citationCathode Based on Molybdenum Disulfide Nanoflakes for Lithium–Oxygen Batteries
Asadi, M., Kumar, B., Liu, C., Phillips, P., Yasaei, P., Behranginia, A., Zapol, P., Klie, R. F., Curtiss, L. A., & Salehi-Khojin, A. (2016) · ACS Nano · doi:10.1021/acsnano.5b06672 · Cited by 202
Na Storage Capability Investigation of a Carbon Nanotube-Encapsulated Fe1–xS Composite
Xiao, Y., Hwang, J.-Y., Belharouak, I., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00660 · Cited by 199
Flexible Metal–Air Batteries: Progress, Challenges, and Perspectives
Liu, Q., Chang, Z., Li, Z., & Zhang, X. (2018) · Small Methods · doi:10.1002/smtd.201700231 · Cited by 199
Zhang, T., & Zhou, H. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201204983 · Cited by 198
Keller, M., Appetecchi, G. B., Kim, G., Sharova, V., Schneider, M., Schuhmacher, J., Roters, A., & Passerini, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.014 · Cited by 195
Zhang, Z., Zhao, Y., Chen, S., Xie, D., Yao, X., Cui, P., & Xu, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04320a · Cited by 194
Xu, J., Liu, Q., Yu, Y., Wang, J., Yan, J., & Zhang, X. (2017) · Advanced Materials · doi:10.1002/adma.201606552 · Cited by 193
Kimura, K., Yajima, M., & Tominaga, Y. (2016) · Electrochemistry Communications · doi:10.1016/j.elecom.2016.02.022 · Cited by 191
Li, L., Peng, S., Bucher, N., Chen, H.-Y., Shen, N., Nagasubramanian, A., Eldho, E., Hartung, S., Ramakrishna, S., & Srinivasan, M. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.012 · Cited by 190
Jeong, S. S., Lim, Y. T., Choi, Y. J., Cho, G. B., Kim, K. W., Ahn, H. J., & Cho, K. K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.108 · Cited by 184
Lee, H., Oh, P., Kim, J., Cha, H., Chae, S., Lee, S., & Cho, J. (2019) · Advanced Materials · doi:10.1002/adma.201900376 · Cited by 182
Liang, J., Li, X., Zhao, Y., Goncharova, L. V., Wang, G., Adair, K. R., Wang, C., Li, R., Zhu, Y., Qian, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201804684 · Cited by 181
Liu, T., Ren, Y., Shen, Y., Zhao, S.-X., Lin, Y., & Nan, C.-W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.111 · Cited by 179
Gao, Y., Wang, D., Li, Y. C., Yu, Z., Mallouk, T. E., & Wang, D. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201807304 · Cited by 179
A Composite Gel–Polymer/Glass–Fiber Electrolyte for Sodium‐Ion Batteries
Gao, H., Guo, B., Song, J., Park, K., & Goodenough, J. B. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402235 · Cited by 178
Yi, E., Wang, W., Kieffer, J., & Laine, R. M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04492a · Cited by 178
Effects of High and Low Salt Concentration in Electrolytes at Lithium–Metal Anode Surfaces
Camacho-Forero, L. E., Smith, T. W., & Balbuena, P. B. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b10774 · Cited by 177
A highly stable sodium solid-state electrolyte based on a dodeca/deca-borate equimolar mixture
Duchêne, L., Kühnel, R.-S., Rentsch, D., Remhof, A., Hagemann, H., & Battaglia, C. (2017) · Chemical Communications · doi:10.1039/c7cc00794a · Cited by 177
Chen, R.-J., Zhang, Y.-B., Liu, T., Xu, B.-Q., Lin, Y.-H., Nan, C.-W., & Shen, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16304 · Cited by 176
Gong, Y., Fu, K., Xu, S., Dai, J., Hamann, T. R., Zhang, L., Hitz, G. T., Fu, Z., Ma, Z., McOwen, D. W., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.01.001 · Cited by 175
Reactivity-Guided Interface Design in Na Metal Solid-State Batteries
Tian, Y., Sun, Y., Hannah, D. C., Xiao, Y., Liu, H., Chapman, K. W., Bo, S.-H., & Ceder, G. (2019) · Joule · doi:10.1016/j.joule.2018.12.019 · Cited by 172
Hou, H., Xu, Q., Pang, Y., Li, L., Wang, J., Zhang, C., & Sun, C. (2017) · Advanced Science · doi:10.1002/advs.201700072 · Cited by 170
Sun, B., Mindemark, J., V. Morozov, E., Costa, L. T., Bergman, M., Johansson, P., Fang, Y., Furó, I., & Brandell, D. (2016) · Phys. Chem. Chem. Phys. · doi:10.1039/c6cp00757k · Cited by 169
The pursuit of rechargeable solid-state Li–air batteries
Li, F., Kitaura, H., & Zhou, H. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40702k · Cited by 168
Xu, R.-C., Xia, X.-H., Li, S.-H., Zhang, S.-Z., Wang, X.-L., & Tu, J.-P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01147d · Cited by 167
Ryu, W.-H., Gittleson, F. S., Thomsen, J. M., Li, J., Schwab, M. J., Brudvig, G. W., & Taylor, A. D. (2016) · Nature Communications · doi:10.1038/ncomms12925 · Cited by 166
Evolution at the Solid Electrolyte/Gold Electrode Interface during Lithium Deposition and Stripping
Sang, L., Haasch, R. T., Gewirth, A. A., & Nuzzo, R. G. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00034 · Cited by 163
A high-rate and long cycle life solid-state lithium–air battery
Zhu, X., Zhao, T. S., Wei, Z., Tan, P., & An, L. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02867a · Cited by 162
Stabilizing interface between Li10SnP2S12 and Li metal by molecular layer deposition
Wang, C., Zhao, Y., Sun, Q., Li, X., Liu, Y., Liang, J., Li, X., Lin, X., Li, R., Adair, K. R., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.030 · Cited by 162
Liu, Q., Liu, T., Liu, D., Li, Z., Zhang, X., & Zhang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602800 · Cited by 161
Cheng, S. H.-S., He, K.-Q., Liu, Y., Zha, J.-W., Kamruzzaman, M., Ma, R. L.-W., Dang, Z.-M., Li, R. K. Y., & Chung, C. Y. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.08.162 · Cited by 161
Liu, Y., Lin, D., Jin, Y., Liu, K., Tao, X., Zhang, Q., Zhang, X., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.aao0713 · Cited by 160
Zhang, C., Lin, Y., & Liu, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01037c · Cited by 159
Wang, S., Gong, F., Yang, S., Liao, J., Wu, M., Xu, Z., Chen, C., Yang, X., Zhao, F., Wang, B., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801806 · Cited by 157
Le, H. T. T., Ngo, D. T., Kalubarme, R. S., Cao, G., Park, C.-N., Park, C., Park, C., & Park, C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05301 · Cited by 154
Rajendra, H. B., Ito, T., & Yamada, H. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0841704jes · Cited by 154
Oh, D. Y., Kim, D. H., Jung, S. H., Han, J., Choi, N., & Jung, Y. S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06873e · Cited by 154
A stable 3 V all-solid-state sodium–ion battery based on a closo -borate electrolyte
Duchêne, L., Kühnel, R., Stilp, E., Cuervo‐Reyes, E., Remhof, A., Hagemann, H. R., & Battaglia, C. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02420g · Cited by 154
He, Z., Chen, L., Zhang, B., Liu, Y., & Fan, L. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.006 · Cited by 154
Haruyama, J., Sodeyama, K., & Tateyama, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08435 · Cited by 153
A Moisture‐ and Oxygen‐Impermeable Separator for Aprotic Li‐O2 Batteries
Kim, B. G., Kim, J., Min, J., Lee, Y., Choi, J., Choi, J., Jang, M. C., Freunberger, S. A., Choi, J. W., & Choi, J. W. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504437 · Cited by 151
Porcarelli, L., Aboudzadeh, M. A., Rubatat, L., Nair, J. R., Shaplov, A. S., Gerbaldi, C., & Mecerreyes, D. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.023 · Cited by 151
Molecular Layer Deposition for Energy Conversion and Storage
Zhao, Y., & Sun, X. A. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00145 · Cited by 151
Ma, J., Liu, Z., Chen, B., Wang, L., Yue, L., Liu, H., Zhang, J., Liu, Z., & Cui, G. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0221714jes · Cited by 150
Su, D., Zhou, D., Wang, C., & Wang, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800154 · Cited by 150
He, W., Cui, Z., Liu, X., Cui, Y., Chai, J., Zhou, X., Liu, Z., & Cui, G. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.12.113 · Cited by 146
Wang, X., Zhu, H., Girard, G. M. A., Yunis, R., MacFarlane, D. R., Mecerreyes, D., Bhattacharyya, A. J., Howlett, P. C., & Forsyth, M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08233a · Cited by 145
Development of the cold sintering process and its application in solid-state lithium batteries
Liu, Y., Sun, Q., Wang, D., Adair, K. R., Liang, J., & Sun, X. A. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.015 · Cited by 145
Advances in lithium—sulfur batteries
Zhang, X., Xie, H., Kim, C.-S., Zaghib, K., Mauger, A., & Julien, C. M. (2017) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2017.09.001 · Cited by 143
Self-citationJeong, K., Park, S., & Lee, S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta09056d · Cited by 142
Aldalur, I., Martínez‐Ibáñez, M., Piszcz, M., Rodrı́guez-Martı́nez, L. M., Zhang, H., & Armand, M. B. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.066 · Cited by 141
Self-citationKwabi, D. G., Bryantsev, V. S., Batcho, T. P., Itkis, D. M., Thompson, C. V., & Shao‐Horn, Y. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201509143 · Cited by 140
Guin, M., Tietz, F., & Guillon, O. (2016) · Solid State Ionics · doi:10.1016/j.ssi.2016.06.005 · Cited by 137
Wu, E. A., Kompella, C. S., Zhu, Z., Lee, J. Z., Lee, S. C., Chu, I., Nguyen, H., Ong, S. P., Banerjee, A., & Meng, Y. S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19037 · Cited by 136
Polymer-Rich Composite Electrolytes for All-Solid-State Li–S Cells
Júdez, X., Zhang, H., Li, C., Eshetu, G. G., Zhang, Y., González-Marcos, J. A., Armand, M. B., & Rodrı́guez-Martı́nez, L. M. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01321 · Cited by 135
Self-citationLife Cycle Assessment and resource analysis of all-solid-state batteries
Troy, S., Schreiber, A., Reppert, T., Gehrke, H.-G., Finsterbusch, M., Uhlenbruck, S., & Stenzel, P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.064 · Cited by 133
Cai, L., Zhang, Q., Mwizerwa, J. P., Wan, H., Yang, X., Xu, X., & Yao, X. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18798 · Cited by 131
Hu, P., Duan, Y., Hu, D., Qin, B., Zhang, J., Wang, Q., Liu, Z., Cui, G., & Chen, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5083683 · Cited by 130
Interfacial challenges and progress for inorganic all-solid-state lithium batteries
Xu, R. C., Xia, X., Zhang, S. Z., Xie, D., Wang, X., & Tu, J. P. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.07.191 · Cited by 130
Copolymers of trimethylene carbonate and ε-caprolactone as electrolytes for lithium-ion batteries
Mindemark, J., Törmä, E., Sun, B., & Brandell, D. (2015) · Polymer · doi:10.1016/j.polymer.2015.02.052 · Cited by 128
Zou, X., Lü, Q., Zhong, Y., Liao, K., Zhou, W., & Shao, Z. (2018) · Small · doi:10.1002/smll.201801798 · Cited by 128
Enhanced Cycling Stability of Rechargeable Li–O2 Batteries Using High‐Concentration Electrolytes
Liu, B., Xu, W., Yan, P., Sun, X., Bowden, M., Read, J. A., Qian, J., Mei, D., Wang, C.-M., & Zhang, J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503697 · Cited by 127
Hofstetter, K., Samson, A. J., Narayanan, S., & Thangadurai, V. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.016 · Cited by 127
Light-cured polymer electrolytes for safe, low-cost and sustainable sodium-ion batteries
Colò, F., Bella, F., Nair, J. R., & Gerbaldi, C. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.079 · Cited by 125
Wu, F., Zhu, N., Bai, Y., Liu, L., Zhou, H., & Wu, C. K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07054 · Cited by 123
Contrasting energy efficiency in various ceramic sintering processes
Heidary, D. S. B., Lanagan, M. T., & Randall, C. A. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.10.015 · Cited by 123
Li, S., Zhu, J., Wang, Y., Howard, J. W., Lü, X., Li, Y., Kumar, R. S., Wang, L., Daemen, L. L., & Zhao, Y. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.11.027 · Cited by 122
An Advanced Separator for Li–O2 Batteries: Maximizing the Effect of Redox Mediators
Lee, S. H., Park, J., Lim, H., & Sun, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602417 · Cited by 122
Xie, D., Chen, S., Zhang, Z., Ren, J., Yao, L., Wu, L., Yao, X., & Xu, X. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.021 · Cited by 120
Borzutzki, K., Thienenkamp, J. H., Diehl, M., Winter, M., & Brunklaus, G. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08391f · Cited by 120
Bao, J., Shi, G., Tao, C., et al. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.020 · Cited by 119
Stability of polymer binders in Li–O 2 batteries
Nasybulin, E. N., Xu, W., Engelhard, M., Nie, Z., Li, X. S., & Zhang, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.097 · Cited by 118
Li-Ion Conduction and Stability of Perovskite Li3/8Sr7/16Hf1/4Ta3/4O3
Huang, B., Xu, B., Li, Y., Zhou, W., You, Y., Zhong, S., Wang, C., & Goodenough, J. B. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03070 · Cited by 118
Lin, Z., Guo, X., & Yu, H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.10.021 · Cited by 116
Stability of garnet-type Li ion conductors: An overview
Duan, H., Zheng, H., Zhou, Y., Xu, B., & Liu, H. (2017) · Solid State Ionics · doi:10.1016/j.ssi.2017.09.018 · Cited by 115
Girard, G. M. A., Hilder, M., Nucciarone, D., Whitbread, K., Zavorine, S., Moser, M., Forsyth, M., MacFarlane, D. R., & Howlett, P. C. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b01929 · Cited by 114
Zhang, X., Wang, S., Tu, J., Zhang, G., Li, S., Tian, D., & Jiao, S. (2017) · ChemSusChem · doi:10.1002/cssc.201702270 · Cited by 113
All-solid-state lithium-ion batteries with TiS 2 nanosheets and sulphide solid electrolytes
Oh, D. Y., Choi, Y. E., Kim, D. H., Lee, Y.-G., Kim, B., Park, J., Sohn, H., & Jung, Y. S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01628f · Cited by 112
Deng, K., Wang, S., Ren, S., Han, D., Xiao, M., & Meng, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11384 · Cited by 110
Choi, Y. E., Park, K. H., Kim, D. H., Oh, D. Y., Kwak, H. R., Lee, Y.-G., & Jung, Y. S. (2017) · ChemSusChem · doi:10.1002/cssc.201700409 · Cited by 110
Girard, G. M. A., Hilder, M., Dupré, N., Guyomard, D., Nucciarone, D., Whitbread, K., Zavorine, S., Moser, M., Forsyth, M., MacFarlane, D. R., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18183 · Cited by 110
Yoshida, K., Sato, T., Unemoto, A., Matsuo, M., Ikeshoji, T., Udovic, T. J., & Orimo, S. (2017) · Applied Physics Letters · doi:10.1063/1.4977885 · Cited by 109
Chen, S., Wang, J., Zhang, Z., Wu, L., Yao, L., Wei, Z., Deng, Y., Xie, D., Yao, X., & Xu, X. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.03.016 · Cited by 108
Yu, S., Schmohl, S., Liu, Z., Hoffmeyer, M., Schön, N., Hausen, F., Tempel, H., Kungl, H., Wiemhöfer, H., & Eichel, R. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11259b · Cited by 107
Forsyth, M., Girard, G. M. A., Basile, A., Hilder, M., MacFarlane, D. R., Chen, F., & Howlett, P. C. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.134 · Cited by 106
Single-ion diblock copolymers for solid-state polymer electrolytes
Rolland, J., Poggi, E., Vlad, A., & Gohy, J. (2015) · Polymer · doi:10.1016/j.polymer.2015.04.056 · Cited by 105
Nair, J. R., Destro, M., Bella, F., Appetecchi, G. B., & Gerbaldi, C. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.001 · Cited by 104
Pang, Q., Zhao, Y., Yu, Y., Bian, X., Wang, X., Wei, Y., Gao, Y. P., & Chen, G. (2017) · ChemSusChem · doi:10.1002/cssc.201702031 · Cited by 103
DABCOnium: An Efficient and High‐Voltage Stable Singlet Oxygen Quencher for Metal–O 2 Cells
Petit, Y. K., Leypold, C., Mahne, N., Mourad, E., Schafzahl, L., Slugovc, C., Borisov, S. M., & Freunberger, S. A. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201901869 · Cited by 103
Realization of high performance polycarbonate-based Li polymer batteries
Sun, B., Mindemark, J., Edström, K., & Brandell, D. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2015.01.020 · Cited by 102
Liquid‐Free Lithium–Oxygen Batteries
Balaish, M., Peled, E., Golodnitsky, D., & Ein‐Eli, Y. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408008 · Cited by 102
Jung, K., Lee, J.-I., Lee, J.-I., Jung, J.-H., Shin, K., Lee, J., & Lee, J. (2014) · Chemical Communications · doi:10.1039/c4cc01243g · Cited by 99
Stretchable lithium-air batteries for wearable electronics
Wang, L., Zhang, Y., Pan, J., & Peng, H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05800k · Cited by 98
Chen, N., Xing, Y., Wang, L., Liu, F., Li, L., Chen, R., Wu, F., & Guo, S. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.02.036 · Cited by 98
Salitra, G., Markevich, E., Afri, M., Talyosef, Y., Hartmann, P., Kulisch, J., Sun, Y., & Aurbach, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07004 · Cited by 98
Super-ion inspired colorful hybrid perovskite solar cells
Fang, H., & Jena, P. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09646d · Cited by 94
Hanghofer, I., Redhammer, G. J., Rohde, S., Hanzu, I., Senyshyn, A., Wilkening, M., & Rettenwander, D. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b02568 · Cited by 94
Structural and Na-ion conduction characteristics of Na 3 PS x Se 4−x
Bo, S., Wang, Y. E., & Ceder, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03027k · Cited by 93
Halogenated Sodium- closo -Dodecaboranes as Solid-State Ion Conductors
Hansen, B. R. S., Paskevicius, M., Jo̷rgensen, M., & Jensen, T. R. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04797 · Cited by 93
Ma, C., Zhang, J., Xu, M., Xia, Q., Liu, J., Zhao, S., Chen, L., Pan, A., Ivey, D. G., & Wei, W. F. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.03.097 · Cited by 92
Towards safer sodium-ion batteries via organic solvent/ionic liquid based hybrid electrolytes
Monti, D., Ponrouch, A., Palacín, M. R., & Johansson, P. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.003 · Cited by 90
Wang, C., Bai, G., Yang, Y., Liu, X., & Shao, H. (2018) · Nano Research · doi:10.1007/s12274-018-2205-7 · Cited by 89
Effect of lithium bis(trifluoromethylsulfonyl)imide salt-doped UV-cured glycidyl methacrylate
Radzir, N. N. M., Hanifah, S. A., Ahmad, A., Hassan, N. H., & Bella, F. (2015) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-015-2910-z · Cited by 84
Liu, T., Xu, J., Liu, Q., Chang, Z., Yin, Y., Yang, X., & Zhang, X. (2016) · Small · doi:10.1002/smll.201602952 · Cited by 84
Zhang, Y., Lai, J., Gong, Y., Hu, Y., Liu, J., Sun, C., & Wang, Z. L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10358 · Cited by 84
Chen, C.-Y., Kiko, T., Hosokawa, T., Matsumoto, K., Nohira, T., & Hagiwara, R. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.099 · Cited by 81
Zhang, B., Zhang, Y., Zhang, N., Liu, J., Cong, L., Liu, J., Sun, L., Mauger, A., Julien, C. M., Xie, H., et al. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.04.033 · Cited by 81
Self-citationA Rechargeable Li-Air Fuel Cell Battery Based on Garnet Solid Electrolytes
Sun, J., Zhao, N., Li, Y., Guo, X., Feng, X., Liu, X., Liu, Z., Cui, G., Zheng, H., Gu, L., et al. (2017) · Scientific Reports · doi:10.1038/srep41217 · Cited by 80
Hu, A., Long, J., Shu, C., Liang, R., & Li, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06912 · Cited by 80
Exfoliated MoS 2 as Electrode for All-Solid-State Rechargeable Lithium-Ion Batteries
Santhosha, A. L., Nayak, P. K., Pollok, K., Langenhorst, F., & Adelhelm, P. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b01816 · Cited by 80
Modified Anion Packing of Na2B12H12 in Close to Room Temperature Superionic Conductors
Sadikin, Y., Schouwink, P., Brighi, M., Łodziana, Z., & Černý, R. (2017) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.7b00013 · Cited by 79
Yoshima, K., Harada, Y., & Takami, N. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.031 · Cited by 78
Meabe, L., Lago, N., Rubatat, L., Li, C., Müller, A. J., Sardón, H., Armand, M. B., & Mecerreyes, D. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.03.217 · Cited by 78
Self-citationFang, H., & Jena, P. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00435 · Cited by 75
An Ultraflexible Silicon–Oxygen Battery Fiber with High Energy Density
Zhang, Y., Jiao, Y., Lu, L., Wang, L., Chen, T., & Peng, H. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201707840 · Cited by 74
Bonnet‐Mercier, N., Wong, R. A., Thomas, M. L., Dutta, A., Yamanaka, K., Yogi, C., Ohta, T., & Byon, H. R. (2014) · Scientific Reports · doi:10.1038/srep07127 · Cited by 73
Jin, Y., & Zhou, H. S. (2016) · ChemSusChem · doi:10.1002/cssc.201600536 · Cited by 71
Single ion conducting lithium sulfur polymer batteries with improved safety and stability
Li, Z., Lu, W., Zhang, N., Pan, Q., Chen, Y., Xu, G., Zeng, D., Zhang, Y., Cai, W., Ming, Y., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04619k · Cited by 70
Chen, Y., Ke, H., Zeng, D., Zhang, Y., Sun, Y., & Cheng, H. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.12.011 · Cited by 68
Xu, R., Zhang, S., Wang, X., Xia, Y., Xia, X., Wu, J., Gu, C., & Tu, J. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201704568 · Cited by 68
Sångeland, C., Younesi, R., Mindemark, J., & Brandell, D. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.03.022 · Cited by 67
Leng, L., Zeng, X., Chen, P., Shu, T., Song, H., Fu, Z., Wang, H., & Liao, S. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.111 · Cited by 66
Emerging applications of spark plasma sintering in all solid-state lithium-ion batteries and beyond
Zhu, H., & Liu, J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.054 · Cited by 66
Li, Y., Ding, F., Xu, Z., Sang, L., Ren, L., Ni, W., & Liu, X. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.050 · Cited by 66
Zhou, Y., Li, Z., & Lu, Y. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.07.038 · Cited by 65
Kimura, K., Motomatsu, J., & Tominaga, Y. (2016) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24235 · Cited by 64
Wang, S., Wang, A., Yang, C., Gao, R., Liu, X., Chen, J. Y., Wang, Z., Zeng, Q., Liu, X., Zhou, H., et al. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.069 · Cited by 63
Jia, H. N., Onishi, H., von Aspern, N., et al. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.07.039 · Cited by 63
A flexible polymer-based Li–air battery using a reduced graphene oxide/Li composite anode
Guo, Z., Li, J., Yuan, X., Chen, C., Wang, F., Tamirat, A. G., Wang, Y., Xia, Y., Wang, L., & Feng, S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01117f · Cited by 62
Supramolecular Self-Assembly of Methylated Rotaxanes for Solid Polymer Electrolyte Application
Imholt, L., Dong, D., Bedrov, D., Cekić-Lasković, I., Winter, M., & Brunklaus, G. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.8b00406 · Cited by 60
Cong, L., Liu, J., Armand, M. B., Mauger, A., Julien, C. M., Xie, H., & Sun, L. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.01.082 · Cited by 59
Self-citationO 2 Adsorption Associated with Sulfur Vacancies on MoS 2 Microspheres
Sun, G., Li, F., Wu, T., Cong, L., Sun, L., Yang, G., Xie, H., Mauger, A., Julien, C. M., & Liu, J. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b03300 · Cited by 55
Self-citationKireeva, N. V., & Pervov, V. S. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp00518k · Cited by 54
Ito, Y., Yamakawa, S., Hayashi, A., & Tatsumisago, M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01227f · Cited by 53
He, D., Kim, D. W., Park, J. S., Cho, S. Y., & Kang, Y. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.069 · Cited by 51
Performance validation of sodium-ion batteries using an ionic liquid electrolyte
Fukunaga, A., Nohira, T., Hagiwara, R., Numata, K., Itani, E., Sakai, S., & Nitta, K. (2016) · Journal of Applied Electrochemistry · doi:10.1007/s10800-016-0940-6 · Cited by 50
Na3NH2B12H12 as high performance solid electrolyte for all-solid-state Na-ion batteries
He, L., Lin, H., Li, H., Filinchuk, Y. E., Zhang, J., Liu, Y., Yang, M., Hou, Y., Deng, Y., Li, H., et al. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.06.054 · Cited by 50
Shu, C., Long, J., Dou, S. X., & Wang, J. (2019) · Small · doi:10.1002/smll.201804701 · Cited by 50
Bitner-Michalska, A., Nolis, G. M., Żukowska, G. Z., Zalewska, A., Poterała, M., Trzeciak, T., Dranka, M., Kalita, M. J., Jankowski, P., Niedzicki, L., et al. (2017) · Scientific Reports · doi:10.1038/srep40036 · Cited by 47
Girard, G. M. A., Wang, X., Yunis, R., MacFarlane, D. R., Bhattacharyya, A. J., Forsyth, M., & Howlett, P. C. (2019) · Batteries & Supercaps · doi:10.1002/batt.201800120 · Cited by 46
Hybrid polymer electrolyte for Li–O2 batteries
Li, B., Liu, Y., Zhang, X., He, P., & Zhou, H. S. (2018) · Green Energy & Environment · doi:10.1016/j.gee.2018.08.002 · Cited by 41
Yao, Q., Fang, H., Deng, K., Kan, E., & Jena, P. (2016) · Nanoscale · doi:10.1039/c6nr05573g · Cited by 40
Smetaczek, S., Welzl, A., Wagner, R., Rettenwander, D., Amthauer, G., Andrejs, L., Taibl, S., Limbeck, A., & Fleig, J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00356h · Cited by 38
Guo, M., Zhou, B., Hu, J., Wang, J., He, D., Xie, X., & Xue, Z. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.07.078 · Cited by 36
Stable cycling of NaFePO4 cathodes in high salt concentration ionic liquid electrolytes
Hilder, M., Howlett, P. C., Saurel, D., Anne, H., Casas‐Cabanas, M., Armand, M. B., Rojo, T., MacFarlane, D. R., & Forsyth, M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.09.102 · Cited by 36
Self-citationOne-Dimensional Glass Micro-Fillers in Gel Polymer Electrolytes for Li-O2 Battery Applications
Chamaani, A., Chawla, N., Safa, M., & El‐Zahab, B. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.03.064 · Cited by 34
Wu, L., Moretti, A., Buchholz, D., Passerini, S., & Bresser, D. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.03.124 · Cited by 33
Wang, S.-W., & Colby, R. H. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02509 · Cited by 24
An Ultraflexible Silicon–Oxygen Battery Fiber with High Energy Density
Zhang, Y., Jiao, Y., Lu, L., Wang, L., Chen, T., & Peng, H. (2017) · Angewandte Chemie · doi:10.1002/ange.201707840 · Cited by 15
Wakayama, H., & Kawai, Y. (2019) · Solid State Ionics · doi:10.1016/j.ssi.2019.01.034 · Cited by 4
Cited by
Tailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Energy storage systems: a review
Mitali, J., Dhinakaran, S., & Mohamad, A. A. (2022) · Energy Storage and Saving · doi:10.1016/j.enss.2022.07.002 · Cited by 911
Liu, D.-H., Bai, Z., Li, M., Yu, A., Luo, D., Liu, W., Yang, L., Lu, J., Amine, K., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00636b · Cited by 483
Eshetu, G. G., Elia, G. A., Armand, M., Forsyth, M., Komaba, S., Rojo, T., & Passerini, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000093 · Cited by 470
Self-citationValuation of Surface Coatings in High-Energy Density Lithium-ion Battery Cathode Materials
Nisar, U., Muralidharan, N., Essehli, R., Amin, R., & Belharouak, I. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.03.015 · Cited by 428
Metadata
- Authors
- Mauger, A., Julien, C. M., Paolella, A., Armand, M., & Zaghib, K.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2019-11-25
- Volume
- 12
- Issue
- 23
- Pages
- 3892
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2989937242
- Cited by
- 277
- References
- 364
- FWCI
- 11.46
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.