Experimental Study of an Enhanced Phase Change Material of Paraffin/Expanded Graphite/Nano-Metal Particles for a Personal Cooling System
Open accessThe DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
A composite phase change material (PCM) was prepared by incorporating paraffin (PA) with expanded graphite (EG) and nano-metal particles to improve the thermal conductivity and reduce the leakage performance of PA once it melts and, consequently, develop a more efficient PCM for a personal phase change cooling system. A series of experiments was carried out by a scanning electron microscope, a differential scanning calorimeter, a hot-disk thermal analyzer, and leakage tests on the composite PCM with various mass fractions of EG and metals (i.e., Cu, Al, Ni, and Fe). Through comprehensive consideration of the thermal conductivity, leakage, and homogeneity, a composite PCM with the optimal proportion (PA-EG11%-Cu1.9%) was screened out. Its thermal conductivity was significantly improved nine times, while the phase change enthalpy showed a minimal decrease. In addition, the relationships of the composite PCM with its temperature and density were systematically investigated. The experimental results are important for determining the proper package density of PCM for application into a personal cooling system because its weight is crucial for the system design and benefits the performance comparison of various PCMs prepared under various conditions. Lastly, the heat storage efficiency of the PA–EG–Cu material was investigated using heat storage tests. Cooling performance clearly improved compared to the PCM without nano-particles added.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The ideal amount of expanded graphene (EG) was found to be 11% to prevent PCM leakage and also have a good heat capacity.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [90]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Thermal conductivity increased with the addition of NPs, with Cu being the best at 1.95 W/mK for a mass fraction of 1.9% (compared to 0.216 W/mK without any enhancements and 1.073 W/mK with EG), and thermal conductivity was linked directly to temperature.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [90]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Copper and aluminum NPs were the most compatible with the paraffin.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [90]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“Heat storage speed was accelerated, and heat storage capacity was strengthened with the addition of the Cu particles [90].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [90]
The cited source says what the claim attributes to it.
In the citing paper
“Cu were the best and the EG prevented leakage”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [90]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sarı, A., & Karaipekli, A. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.11.004 · Cited by 978
Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material
Py, X., Olives, R., & Mauran, S. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00309-4 · Cited by 618
Agyenim, F., Eames, P., & Smyth, M. (2009) · Solar Energy · doi:10.1016/j.solener.2009.04.007 · Cited by 596
Study on paraffin/expanded graphite composite phase change thermal energy storage material
Zhang, Z., & Fang, X. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.03.004 · Cited by 518
Tian, Y., & Zhao, C. Y. (2011) · Energy · doi:10.1016/j.energy.2011.07.019 · Cited by 495
Sarı, A., & Karaipekli, A. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.11.057 · Cited by 469
Effect of carbon nanofiber additives on thermal behavior of phase change materials
Elgafy, A., & Lafdi, K. (2005) · Carbon · doi:10.1016/j.carbon.2005.06.042 · Cited by 430
Numerical investigation of a PCM-based heat sink with internal fins
Shatikian, V., Ziskind, G., & Letan, R. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.10.042 · Cited by 420
Xia, L., Zhang, P., & Wang, R. Z. (2010) · Carbon · doi:10.1016/j.carbon.2010.03.030 · Cited by 397
Wang, J., Xie, H., Xin, Z., Li, Y., & Chen, L. (2010) · Solar Energy · doi:10.1016/j.solener.2009.12.004 · Cited by 395
Cited by
Nano-enhanced phase change materials: Fundamentals and applications
Said, Z., Pandey, A. K., Tiwari, A. K., Kalidasan, B., Jamil, F., Thakur, A. K., Tyagi, V. V., Sarı, A., & Ali, H. M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2024.101162 · Cited by 386
Okogeri, O., & Stathopoulos, V. N. (2021) · International Journal of Thermofluids · doi:10.1016/j.ijft.2021.100081 · Cited by 180
Phase change material based thermal energy storage applications for air conditioning: Review
Muzhanje, A. T., Hassan, M. A., & Hassan, H. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118832 · Cited by 151
Personal thermal management - A review on strategies, progress, and prospects
Sajjad, U., Hamid, K., Rehman, T., Sultan, M. A., Abbas, N., Ali, H. M., Imran, M. A., Muneeshwaran, M., Chang, J.-Y., & Wang, C. (2021) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2021.105739 · Cited by 133
Xie, N., Zhang, Y., Liu, X., Luo, R., Liu, Y., & Ma, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121341 · Cited by 123
Self-citationShen, Z., Kwon, S., Lee, H. L., Toivakka, M., & Oh, K. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118585 · Cited by 120
Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review
Tofani, K., & Tiari, S. (2021) · Energies · doi:10.3390/en14133821 · Cited by 114
“Heat storage speed was accelerated, and heat storage capacity was strengthened with the addition of the Cu particles [90].”
BackgroundInfluentialAn overview of the preparation and characteristics of phase change materials with nanomaterials
Muzhanje, A. T., Hassan, M. A., Ookawara, S. A., & Hassan, H. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104353 · Cited by 96
Al-Yasiri, Q. M. Q., & Szabó, M. (2021) · Renewable Energy and Environmental Sustainability · doi:10.1051/rees/2021040 · Cited by 94
Research progress on the influence of nano-additives on phase change materials
Han, L., Zhang, X., Ji, J., & Ma, K. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105807 · Cited by 92
Review: incorporation of organic PCMs into textiles
Yang, K., Venkataraman, M., Zhang, X., Wiener, J., Zhu, G., Yao, J., & Militký, J. (2022) · Journal of Materials Science · doi:10.1007/s10853-021-06641-3 · Cited by 82
Al-Yasiri, Q. M. Q., & Szabó, M. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102710 · Cited by 81
Wen, R., Zhu, X., Yang, C., Sun, Z., Zhang, L., Xu, Y., Qiao, J., Wu, X., Min, X., & Huang, Z. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2021.103921 · Cited by 80
Hu, C., Wang, Z., Bo, R., Li, C., & Meng, X. (2023) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2023.102725 · Cited by 77
Hayat, M. A., Chen, Y., Bevilacqua, M., Li, L., & Yang, Y. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101799 · Cited by 73
Personal cooling garments and phase change materials: A review
Rahimi, E., Babapoor, A., Moradi, G., Kalantary, S., & Esmaeelpour, M. M. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.114063 · Cited by 73
An overview of phase change materials, their production, and applications in textiles
Das, A., Apu, M. M. H., Akter, A., Reza, M. T., & Mia, R. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.103603 · Cited by 72
Junaid, M. F., Rehman, Z. U., Ijaz, N., Čekon, M., Čurpek, J., & Elhag, A. B. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.112280 · Cited by 68
Wang, J., Mei, W., Mao, B., & Wang, Q. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121080 · Cited by 67
Thermophysical properties of Nano-enhanced phase change materials for domestic heating applications
D'Oliveira, E. J., Costa, S.-C., Groulx, D., & Azimov, U. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103794 · Cited by 66
A hybrid cooling method with low energy consumption for lithium-ion battery under extreme conditions
Hu, S., Wang, S., Ma, C., Li, S., Liu, X., & Zhang, Y. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115831 · Cited by 62
Self-citationAdesusi, O. M., Adetunji, O. R., Kuye, S. I., Musa, A. I., Erinle, T. J., Gbadamosi-Olatunde, O. B., & Ipadeola, S. O. (2022) · International Journal of Thermofluids · doi:10.1016/j.ijft.2023.100360 · Cited by 56
Ma, C., Zhang, Y., Hu, S., Liu, X., & He, S. (2022) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2022.104814 · Cited by 56
Self-citationA review of phase change materials and heat enhancement methodologies
Saqib, M., & Andrzejczyk, R. (2022) · Wiley Interdisciplinary Reviews Energy and Environment · doi:10.1002/wene.467 · Cited by 54
Fu, T., Wang, W., & Fang, G. (2023) · Energy Storage · doi:10.1002/est2.533 · Cited by 47
Highly stable solid-solid phase change materials for battery thermal management systems
Zeng, X., Ye, L., Wang, C., Wu, D., Zhong, K., & Kong, Z. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111495 · Cited by 47
Aziz, A., Waheed, W., Mourad, A., Abderrahmane, A., Younis, O., Abu‐Nada, E., & Alazzam, A. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109579 · Cited by 45
Rallabandi, S., & Vedaraj, I. S. R. (2024) · Energy Technology · doi:10.1002/ente.202301404 · Cited by 44
Flexible solid-solid phase change materials with high stability for thermal management
Wu, T., Wang, C., Hu, Y., Zeng, X., & Song, M. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124202 · Cited by 40
Chakraborty, A., Noh, J., Mach, R. H., Shamberger, P. J., & Yu, C. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104856 · Cited by 38
Alamayreh, M. I., & Alahmer, A. I. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.104577 · Cited by 38
Li, Y., Dong, M., Song, W., Liang, X., Chen, Y., & Liu, Y. (2021) · Materials · doi:10.3390/ma14071775 · Cited by 35
Deng, Q., Liu, Q., Nian, Y., Zhao, R. L., & Cheng, W. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108701 · Cited by 35
Rashid, F. L., Dhaidan, N. S., Al-Obaidi, M. A. A., Mohammed, H. I., Mahdi, A. J., Ameen, A., Parveen, R., Kezzar, M., Nazari, S., & Galal, A. M. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.115327 · Cited by 32
Wen, R., Wu, M., Chen, B., & Chen, W. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106371 · Cited by 31
Messenger, M. A., Manglik, R. M., & Boetcher, S. K. S. (2024) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4064563 · Cited by 31
Fang, G., Sun, P., Zhao, M., & Zhang, W. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118618 · Cited by 28
Zhang, B., Zhang, Y., Li, K., Ma, C., & Yuan, B. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105336 · Cited by 27
Self-citationRadomska, E., Mika, Ł., Sztekler, K., & Lis, Ł. (2020) · Energies · doi:10.3390/en13184840 · Cited by 26
Performance Optimization of a Thermoelectric‐Water Hybrid Cooling Garment
Li, L., Liu, W., Sun, W. M., Wang, D., Yin, L., Li, M., Shi, X., Liu, Q., & Chen, Z. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202301069 · Cited by 24
Ren, J., Hu, T., Zhang, W., Li, L., & Yuan, W. (2024) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2024.113326 · Cited by 22
Xu, X., Zhang, X., Ji, J., Fang, M., Yang, M., Ma, K., & Gao, Y. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c00522 · Cited by 20
Güler, O., & Yazıcı, M. Y. (2025) · Materials · doi:10.3390/ma18010213 · Cited by 20
Venugopal, A., Anzil, K. K., Thomas, B. G., & Varghese, J. T. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104332 · Cited by 20
Shehram, M., Hamidi, M. N., Wahab, A. A. A., & Desa, M. K. M. (2025) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-025-14119-6 · Cited by 18
Jiang, Z., Tang, J., Zhang, C., Xie, Y., & Chen, J. (2025) · Polymer Chemistry · doi:10.1039/d5py00318k · Cited by 18
Jiao, Z., Li, S., Zhou, K., Bao, S., Yu, Y., Kang, H., Kang, A., Yu, Z., Ma, L., & Wei, Q. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.106938 · Cited by 16
Boetcher, S. K. S. (2022) · CRC Press eBooks · doi:10.1201/9781003213260-11 · Cited by 15
Przybek, A., Hebdowska-Krupa, M., & Łach, M. (2025) · Materials · doi:10.3390/ma18225166 · Cited by 13
Wen, R., Wu, M., Zhu, J., Zhu, S., & Chen, W. (2022) · Fullerenes Nanotubes and Carbon Nanostructures · doi:10.1080/1536383x.2022.2066654 · Cited by 12
Shanmugavalli, P., & Rajaraman, R. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.08.171 · Cited by 10
Nirwan, A., Kumar, R., Mondal, B., Kumar, J., Bera, A., & Kumar, R. (2020) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2020.1818004 · Cited by 10
A review of phase change materials: Selection, degradation, and materials compatibility
Sharma, D., Loukodimou, A., Champel, B., & Paul, S. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.122473 · Cited by 9
Ustaoğlu, A., Torlaklı, H., Çay, V. V., Koçyiğit, Ş., Erdoğmuş, E., Hekimoğlu, G., Sarı, A., & Gençel, O. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.116324 · Cited by 9
Debbarma, A. (2024) · Energy Technology · doi:10.1002/ente.202301247 · Cited by 8
Impregnation of Activated Carbon with Organic Phase-Change Material
Bae, J., Kim, S., Kim, K.-S., & Baek, S. (2023) · Materials · doi:10.3390/ma17010067 · Cited by 8
Zhang, S., Zhao, G., Li, Z., Hu, J., Zhao, Z., Yao, J., Cheng, N., & Zhang, Z. (2025) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2025.113552 · Cited by 8
Shehram, M., Hamidi, M. N., Wahab, A. A. A., & Desa, M. K. M. (2025) · International Journal of Ambient Energy · doi:10.1080/01430750.2025.2462584 · Cited by 7
Kumar, N., Thapliyal, P. C., Kumar, A., & Ashok Kumar, M. S. (2022) · Energy Storage · doi:10.1002/est2.350 · Cited by 7
Powała, K., Obraniak, A., & Heim, D. (2021) · Materials · doi:10.3390/ma14123241 · Cited by 7
Ding, Z., Qiu, X., Liu, H., & Gu, L. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.106426 · Cited by 7
Chemical Heating for Minimally Instrumented Point-of-Care (POC) Molecular Diagnostics
Mauk, M. G., Ansah, F., & El‐Tholoth, M. (2024) · Biosensors · doi:10.3390/bios14110554 · Cited by 5
Hoke, T., Hoke, J., Guo, S., Chan, B., & Chen, X. (2026) · Advanced Science · doi:10.1002/advs.75791 · Cited by 4
Self-citationPowała, K., Obraniak, A., Heim, D., & Mrowiec, A. (2022) · Materials · doi:10.3390/ma15196564 · Cited by 4
Nanosilica Gel-Stabilized Phase-Change Materials Based on Epoxy Resin and Wood’s Metal
Ilyina, S. O., Gorbunova, I. Y., Shutov, V. V., Kerber, M. L., & Ilyin, S. O. (2026) · Gels · doi:10.3390/gels12010079 · Cited by 3
Chen, H., Li, C., Yu, F., Men, L., Wang, C., & Nie, P. (2025) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/ctaf040 · Cited by 2
Hu, H., Wang, C., Xie, S., & Sun, W. (2025) · ACS Applied Energy Materials · doi:10.1021/acsaem.5c02576 · Cited by 2
Loginova, Y., Jarimi, H., Syafiq, U., Radzi, A. A. S. M., Suhendri, S., Razak, T. R., & Riffat, S. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.128841 · Cited by 2
Thermophysical properties of graphene aerogel composite phase change materials
Li, J., Li, S., Di, C., & Liao, Y. (2021) · Acta Physica Sinica · doi:10.7498/aps.70.20201499 · Cited by 2
SHIFTING THE PARADIGM OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS THROUGH ADDITIVE MANUFACTURING
Boetcher, S. K. S. (2023) · International Heat Transfer Conference (IHTC) · doi:10.1615/ihtc17.430-190 · Cited by 2
Jatav, A. K., & Reddy, K. S. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.131020 · Cited by 1
Shahanaghi, E. S., Varol, Y., Gürgenç, E., Şenocak, Ş. M., BİÇER, A., & Gürgenç, T. (2026) · Molecules · doi:10.3390/molecules31152572 · Cited by 1
Shen, J., Song, Q., Liu, X., Wang, C., Zhang, L., & Zheng, R. (2025) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-025-14812-6 · Cited by 1
Farhan, F., & Hamza, M. (2024) · Materials science forum · doi:10.4028/p-v06hrd · Cited by 1
Zmywaczyk, J., Zbińkowski, P., & Koniorczyk, P. (2023) · Energies · doi:10.3390/en16166068 · Cited by 1
Study of coconut oil and expanded graphite mixture as phase change material
Henokh, E., Ardiyansyah, Y., & Rafi, S. M. (2024) · AIP conference proceedings · doi:10.1063/5.0145912 · Cited by 1
Trisnadewi, T., Astriani, S., Kismanto, A., Zuldian, P., Supriatna, N. K., Purawiardi, R. I., Fariza, O., Ermada, F. J., Putra, N. S. D., & Aprianti, N. (2025) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2025.103952 · Cited by 1
Qian, Y., Wang, Q., Zhao, Y., & Li, Z. (2026) · Materials · doi:10.3390/ma19071330 · Cited by 1
Phase change materials for solar-powered devices
Panday, C. T., Srivastava, A., Ansu, A. K., Singh, P., & Awasthi, S. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.112585
Research Progress on Thermal Conductivity Enhancement of Composite Phase Change Materials
冯, 思. (2025) · Journal of Advances in Physical Chemistry · doi:10.12677/japc.2025.141011
Hassan, M. F., Khalifa, A. H. N., & Hamad, A. J. (2026) · AIP conference proceedings · doi:10.1063/5.0306016
Dash, C., Chakraborty, S., & Dehury, P. (2026) · Thermal advances. · doi:10.1016/j.thradv.2026.100225
Optimaal Parameter- en Vinontwerp voor PCM-gebaseerde Thermische Energieopslag
Peremans, B. (2020) · Lirias (KU Leuven)
Junaid, M. F., Rehman, Z. U., Fabiani, C., Chiatti, C., Matejdes, M., & Slaný, M. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.112592
YUAN, Z. (2024) · Institutional Repositories DataBase (IRDB) · doi:10.18926/67135
Yang, H., Zhang, Y., & Cui, B. (2026) · ACS Omega · doi:10.1021/acsomega.5c11426
Self-citationThermal properties of phase change thermal interface materials induced by magnetic field
Wu, T., Chen, Q., Lin, M., Hu, Y., Xu, D., Rao, Z., Huang, J., & Cai, S. (2026) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2026.129884
Metadata
- Authors
- Ma, C., Zhang, Y., Chen, X., Song, X., & Tang, K.
- Affiliations
- Wuhan University of Technology (CN)
- Corresponding author
- Tang, Kaixuan
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2020-02-22
- Volume
- 13
- Issue
- 4
- Pages
- 980
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC7078843
- OpenAlex
- W3006864822
- Cited by
- 80
- References
- 42
- Citations by year
- 2026: 7 · 2025: 15 · 2024: 11 · 2023: 14 · 2022: 20 · 2021: 11 · 2020: 2
- FWCI
- 5.78
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51404178, 51706164)
- National Key R&D Program of China (2017YFC0804700)
- Hong Kong Scholar Program (XJ2015037)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Keywords
- phase change materials, alkanes, expanded graphite, copper nanoparticles, thermal conductivity enhancement, leakage reduction, personal cooling systems, heat storage efficiency, transition enthalpy, density-temperature relationship
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.