Experimental Study of an Enhanced Phase Change Material of Paraffin/Expanded Graphite/Nano-Metal Particles for a Personal Cooling System
Open accessThe DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
A composite phase change material (PCM) was prepared by incorporating paraffin (PA) with expanded graphite (EG) and nano-metal particles to improve the thermal conductivity and reduce the leakage performance of PA once it melts and, consequently, develop a more efficient PCM for a personal phase change cooling system. A series of experiments was carried out by a scanning electron microscope, a differential scanning calorimeter, a hot-disk thermal analyzer, and leakage tests on the composite PCM with various mass fractions of EG and metals (i.e., Cu, Al, Ni, and Fe). Through comprehensive consideration of the thermal conductivity, leakage, and homogeneity, a composite PCM with the optimal proportion (PA-EG11%-Cu1.9%) was screened out. Its thermal conductivity was significantly improved nine times, while the phase change enthalpy showed a minimal decrease. In addition, the relationships of the composite PCM with its temperature and density were systematically investigated. The experimental results are important for determining the proper package density of PCM for application into a personal cooling system because its weight is crucial for the system design and benefits the performance comparison of various PCMs prepared under various conditions. Lastly, the heat storage efficiency of the PA–EG–Cu material was investigated using heat storage tests. Cooling performance clearly improved compared to the PCM without nano-particles added.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The ideal amount of expanded graphene (EG) was found to be 11% to prevent PCM leakage and also have a good heat capacity.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [90]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Thermal conductivity increased with the addition of NPs, with Cu being the best at 1.95 W/mK for a mass fraction of 1.9% (compared to 0.216 W/mK without any enhancements and 1.073 W/mK with EG), and thermal conductivity was linked directly to temperature.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [90]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Copper and aluminum NPs were the most compatible with the paraffin.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [90]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“Heat storage speed was accelerated, and heat storage capacity was strengthened with the addition of the Cu particles [90].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [90]
The cited source says what the claim attributes to it.
In the citing paper
“Cu were the best and the EG prevented leakage”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [90]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sarı, A., & Karaipekli, A. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.11.004 · Cited by 978
Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material
Py, X., Olives, R., & Mauran, S. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00309-4 · Cited by 618
Agyenim, F., Eames, P., & Smyth, M. (2009) · Solar Energy · doi:10.1016/j.solener.2009.04.007 · Cited by 596
Study on paraffin/expanded graphite composite phase change thermal energy storage material
Zhang, Z., & Fang, X. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.03.004 · Cited by 518
Tian, Y., & Zhao, C. Y. (2011) · Energy · doi:10.1016/j.energy.2011.07.019 · Cited by 495
Sarı, A., & Karaipekli, A. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.11.057 · Cited by 469
Effect of carbon nanofiber additives on thermal behavior of phase change materials
Elgafy, A., & Lafdi, K. (2005) · Carbon · doi:10.1016/j.carbon.2005.06.042 · Cited by 430
Numerical investigation of a PCM-based heat sink with internal fins
Shatikian, V., Ziskind, G., & Letan, R. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.10.042 · Cited by 420
Xia, L., Zhang, P., & Wang, R. Z. (2010) · Carbon · doi:10.1016/j.carbon.2010.03.030 · Cited by 397
Wang, J., Xie, H., Xin, Z., Li, Y., & Chen, L. (2010) · Solar Energy · doi:10.1016/j.solener.2009.12.004 · Cited by 395
Cited by
Nano-enhanced phase change materials: Fundamentals and applications
Said, Z., Pandey, A. K., Tiwari, A. K., Kalidasan, B., Jamil, F., Thakur, A. K., Tyagi, V. V., Sarı, A., & Ali, H. M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2024.101162 · Cited by 386
Okogeri, O., & Stathopoulos, V. N. (2021) · International Journal of Thermofluids · doi:10.1016/j.ijft.2021.100081 · Cited by 180
Phase change material based thermal energy storage applications for air conditioning: Review
Muzhanje, A. T., Hassan, M. A., & Hassan, H. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118832 · Cited by 151
Personal thermal management - A review on strategies, progress, and prospects
Sajjad, U., Hamid, K., Rehman, T., Sultan, M. A., Abbas, N., Ali, H. M., Imran, M. A., Muneeshwaran, M., Chang, J.-Y., & Wang, C. (2021) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2021.105739 · Cited by 133
Xie, N., Zhang, Y., Liu, X., Luo, R., Liu, Y., & Ma, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121341 · Cited by 123
Self-citation
Metadata
- Authors
- Ma, C., Zhang, Y., Chen, X., Song, X., & Tang, K.
- Affiliations
- Wuhan University of Technology (CN)
- Corresponding author
- Tang, Kaixuan
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2020-02-22
- Volume
- 13
- Issue
- 4
- Pages
- 980
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC7078843
- OpenAlex
- W3006864822
- Cited by
- 80
- References
- 42
- Citations by year
- 2026: 7 · 2025: 15 · 2024: 11 · 2023: 14 · 2022: 20 · 2021: 11 · 2020: 2
- FWCI
- 5.78
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51404178, 51706164)
- National Key R&D Program of China (2017YFC0804700)
- Hong Kong Scholar Program (XJ2015037)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Keywords
- phase change materials, alkanes, expanded graphite, copper nanoparticles, thermal conductivity enhancement, leakage reduction, personal cooling systems, heat storage efficiency, transition enthalpy, density-temperature relationship
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.