Mechanical Behavior of a Composite Lightweight Slab, Consisting of a Laminated Wooden Joist and Ecological Mortar
Open accessThe DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Abstract
The investigation reported in this paper is an evaluation of the mechanical behavior of full-scale ecological mortar slabs manufactured with a mixture of expanded clay and recycled concrete aggregates. The composite mortars form a compressive layer over laminated wooden joists to form a single construction unit. To do so, full-scale flexural tests are conducted of the composite laminated wood-ecological mortar slabs with different types of mortar designs: reference mortar (MR), lightweight mortar dosed with recycled concrete aggregates (MLC), and lightweight mortar dosed with recycled mixed aggregates (MLM). The test results showed that the mortar forming the compression layer and the laminated wooden joists worked in unison and withstood a higher maximum failure load under flexion than the failure load of the wooden joists in isolation. Moreover, the laboratory test results were compared with the simulated values of the theoretical model, generated in accordance with the technical specifications for structural calculations contained in the Spanish building code, and with the results calculated by a computer software package. From the analysis of the results of the calculation methods and the full-scale laboratory test results, it was concluded that the safety margin yielded by the calculations validated the use of those methods on this type of composite slab. In this way, a strong mixed wood–mortar slab was designed, contributing little dead-load to the building structure and its manufacture with recycled aggregate, also contributes to the circular economy of construction materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures


















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Wood and timber construction products are far more energy and resource-efficient in the extraction and processing of raw materials than conventional fossil materials used in the construction sector.”
From Integrating Regionalized Socioeconomic Considerations onto Life Cycle Assessment for Evaluating Bioeconomy Value Chains: A Case Study on Hybrid Wood–Concrete Ceiling Elements (2021) · cites this paper as [20]
Experimental — accuracy not yet measuredThe check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“From the perspective of climate change, the ability of wood to store carbon and the possibility of using wood to replace emission-intensive and non-renewable materials (e.g., aluminum, steel and concrete) is becoming more relevant in terms of the feasibility of these applications [17-21].”
From Integrating Regionalized Socioeconomic Considerations onto Life Cycle Assessment for Evaluating Bioeconomy Value Chains: A Case Study on Hybrid Wood–Concrete Ceiling Elements (2021) · cites this paper as [20]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silva, R. V., de Brito, J., & Dhir, R. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.117 · Cited by 1,229
Circular economy for the built environment: A research framework
Pomponi, F., & Moncaster, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.055 · Cited by 1,169 · cited 1×
“The new social initiatives for environmental defense require the substitution of lineal models of development where excessive quantities of resources are used, for circular economies, in which the waste generated in industrial processes is recovered as a raw material [25,26], thereby avoiding the over-exploitation of…”
BackgroundAn introductory note on the environmental economics of the circular economy
Andersen, M. S. (2007) · Sustainability Science · doi:10.1007/s11625-006-0013-6 · Cited by 873 · cited 1×
“The new social initiatives for environmental defense require the substitution of lineal models of development where excessive quantities of resources are used, for circular economies, in which the waste generated in industrial processes is recovered as a raw material [25,26], thereby avoiding the over-exploitation of…”
BackgroundUse of plastic waste as aggregate in cement mortar and concrete preparation: A review
Saikia, N., & de Brito, J. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.066 · Cited by 709
Reusing ceramic wastes in concrete
Pacheco-Torgal, F., & Jalali, S. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.10.023 · Cited by 519
How can the construction industry contribute to sustainable development? A conceptual framework
Sev, A. (2009) · Sustainable Development · doi:10.1002/sd.373 · Cited by 367 · cited 1×
“The new social initiatives for environmental defense require the substitution of lineal models of development where excessive quantities of resources are used, for circular economies, in which the waste generated in industrial processes is recovered as a raw material [25,26], thereby avoiding the over-exploitation of…”
BackgroundAgrela, F., Sánchez de Juan, M., Ayuso, J., Geraldes, V. L., & Jiménez, J. R. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.04.027 · Cited by 239
Urban morphology and place identity in European cities: built heritage and innovative design
Gospodini, A. (2004) · Journal of Urban Design · doi:10.1080/1357480042000227834 · Cited by 228
Sustainability in Construction Sector
Yılmaz, M., & Bakış, A. (2015) · Procedia - Social and Behavioral Sciences · doi:10.1016/j.sbspro.2015.06.312 · Cited by 211
Shear and Bending Performance of a Novel Wood–Concrete Composite System
Clouston, P. L., Bathon, L. A., & Schreyer, A. C. (2005) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(2005)131:9(1404 · Cited by 158
Strength and workability of masonry mortars manufactured with ladle furnace slag
Sáiz, Á. R., Manso, J. M., Torre, Á. A., & González, J. (2009) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2009.04.015 · Cited by 101
Investigation of Notched Composite Wood–Concrete Connections
Gutkowski, R. M., Brown, K., Shigidi, A., & Natterer, J. (2004) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(2004)130:10(1553 · Cited by 92
Characterization of Polyurethane Foam Waste for Reuse in Eco-Efficient Building Materials
Rojo, R. G., Cuenca-Romero, L. A., Sáiz, Á. R., Calderón, V., & González, S. G. (2019) · Polymers · doi:10.3390/polym11020359 · Cited by 87
Lightweight masonry mortars made with expanded clay and recycled aggregates
Ruipérez, C. M., Sáiz, Á. R., González, S. G., & Calderón, V. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.065 · Cited by 76 · cited 9×
“Compressive strength at 28 days (N/mm2) [37] EN 1015-11 [45] 35.”
BackgroundResultInfluentialShear forces, root rotations, phase angles and delamination of layered materials
Thouless, M. D. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2018.01.033 · Cited by 55 · cited 3×
“The analytical models that will be employed, in application of the current norms in the European Union (EuroCode 5) [51] and in Spain (Código Técnico de la Edificación Documento Básico SE-M Seguridad en Madera) [52], are explained in the following sections [53].”
MethodInfluentialBarriguete, A. V., Merino, M. D. R., Atanes-Sánchez, E., Ramírez, C. P., & Arrebola, C. V. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.011 · Cited by 50
Analysis of the Nonlinear Behavior of Timber-Concrete Connections
Dias, A. M. P. G. (2012) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0000523 · Cited by 45
Balogh, J., Fragiacomo, M., Gutkowski, R. M., & Fast, R. S. (2008) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(2008)134:3(430 · Cited by 43
A Comparative Review of Policy for the Protection of the Architectural Heritage of Europe
Pickard, R. (2002) · International Journal of Heritage Studies · doi:10.1080/1352725022000037191e · Cited by 43
Faggiano, B., Marzo, A., Formisano, A., & Mazzolani, F. M. (2008) · Computers & Structures · doi:10.1016/j.compstruc.2008.07.005 · Cited by 39
Demand-side policies for environmental protection and sustainable usage of renewable resources
Caviglia‐Harris, J. L., Kahn, J. R., & Green, T. G. (2003) · Ecological Economics · doi:10.1016/s0921-8009(03)00009-0 · Cited by 38 · cited 1×
“The new social initiatives for environmental defense require the substitution of lineal models of development where excessive quantities of resources are used, for circular economies, in which the waste generated in industrial processes is recovered as a raw material [25,26], thereby avoiding the over-exploitation of…”
BackgroundAdhesively bonded connections between composite sandwich floor panels for building rehabilitation
Garrido, M., Correia, J. R., Keller, T. A., & Branco, F. A. B. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.08.080 · Cited by 36
Flexural and shear behaviour of ancient wooden beams: Experimental and theoretical evaluation
Calderoni, C., Matteis, G. D., Giubileo, C., & Mazzolani, F. M. (2005) · Engineering Structures · doi:10.1016/j.engstruct.2005.09.027 · Cited by 33
Evaluation for the conservation of historic buildings
Yung, E. H. K., & Chan, E. H. W. (2013) · Facilities · doi:10.1108/f-03-2012-0023 · Cited by 30
Marini, A., Cominelli, S., Zanotti, C., & Giuriani, E. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.10.010 · Cited by 21
Sánchez, N. C., & Hernández, L. A. (2015) · Informes de la Construcción · doi:10.3989/ic.14.049 · Cited by 16
Pincus, G. (1969) · Journal of the Structural Division · doi:10.1061/jsdeag.0002382 · Cited by 16
Repair and Strengthening of Traditional Timber Roof and Floor Structures
Branco, J. M., Descamps, T., & Tsakanika, E. (2017) · Building pathology and rehabilitation · doi:10.1007/978-981-10-5858-5_5 · Cited by 16
La regeneración urbana integrada y la declaración de Toledo
Martín-Consuegra, F., Alonso, C., & Vázquez, B. F. (2015) · Informes de la Construcción · doi:10.3989/ic.14.084 · Cited by 15
Durability of lightweight concrete made concurrently with waste aggregates and expanded clay
Ruipérez, C. M., Sáiz, Á. R., Junco, C., Fiol, F., & Calderón, V. (2018) · Structural Concrete · doi:10.1002/suco.201700209 · Cited by 13 · cited 9×
“18 Surface abrasion resistance (mm) [38] EN 14157 [47] 23.”
BackgroundResultInfluentialAnalysis and Strengthening of Timber Floors and Roofs
Branco, J. M., & Tomasi, R. (2013) · Building pathology and rehabilitation · doi:10.1007/978-3-642-39686-1_8 · Cited by 10
Strengthening of wooden floors with high performance concrete slabs
Meda, A., & Riva, P. (2001) · Cineca Institutional Research Information System (Tor Vergata University) · Cited by 8
Trutalli, D., Marchi, L., Scotta, R., & Pozza, L. (2017) · COMPDYN Proceedings · doi:10.7712/120117.5565.17367 · Cited by 5
Fatigue behaviour of composite timber-concrete beams
Croce, P., Beconcini, M. L., Formichi, P., Landi, F., & Cardella, D. (2018) · Procedia Structural Integrity · doi:10.1016/j.prostr.2018.11.047 · Cited by 4
Research works printed but not linked: 3
- European Union. Opinion of the European Committee of the Regions Towards an Integrated Approach to Cultural Heritage for Europe. Official Journal of the European Union 195/04 2015 Available online: https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:C:2015:195:FULL&from=EN (accessed on 5 April 2020)
- Croci G. The Conservation and Structural Restoration of Architectural Heritage (Vol. 1) Advances Architectural Series WIT Press Southampton, UK 1998
- Natterer J. Hamm J. Favre P. Composite wood-concrete floors for multi-story buildings Proceedings of the International Wood Engineering Conference New Orleans, Louisiana, USA 28–31 October 1996 Volume 3 431 435
Cited by
Rahla, K. M., Mateus, R., & Bragança, L. (2021) · Infrastructures · doi:10.3390/infrastructures6040049 · Cited by 99
Bezama, A., Hildebrandt, J., & Thrän, D. (2021) · Sustainability · doi:10.3390/su13084221 · Cited by 22
Metadata
- Authors
- Muñoz-Ruiperez, C., Fiol Oliván, F., Calderón Carpintero, V., Santamaría-Vicario, I., & Rodríguez Sáiz, Á.
- Affiliations
- Department of Construction, University of Burgos, Calle Villadiego s/n, 09001 Burgos, Spain
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2020-06-05
- Volume
- 13
- Issue
- 11
- Pages
- 2575
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC7321609
- OpenAlex
- W3033745257
- Semantic Scholar
- 21399eb91921fecfc85d3dd1f25903edfeb17866
- Cited by
- 2
- References
- 34
- Citations by year
- 2021: 2
- FWCI
- 0.26
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Building and Construction › Recycled Aggregate Concrete Performance
- Physical Sciences › Engineering › Civil and Structural Engineering › Masonry and Concrete Structural Analysis
- Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
- Keywords
- composite slabs, recycled concrete aggregate, expanded clay aggregate, lightweight mortar, flexural behavior, structural calculation methods, safety margin, circular economy, building materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.