Sorption of Heavy Metal Ions of Chromium, Manganese, Selenium, Nickel, Cobalt, Iron from Aqueous Acidic Solutions in Batch and Dynamic Conditions on Natural and Synthetic Aluminosilicate Sorbents
Open accessThe DOI matches its Crossref record; 57 of the 59 references it cites were found in a registry or an index.
Abstract
Zeolites are materials with known sorption properties. The sorption is thought to progress mainly by ion exchange with Na+, K+, Mg2+, Ca2+ or H+ from the zeolite exchange sites. The aim of the study was to compare the sorption properties of natural and synthetic zeolites on the example of the removal of selected metals from aqueous acidic solutions. Uptake experiments for selected ions of chromium, manganese, selenium, nickel, cobalt, and iron were performed using the batch and kinetic column methods. The sorption of the individual metal ions in mg per 1g of sorbent was determined for each sorbent. The relative affinity sequence of the examined cations toward the various sorbent was presented. The Langmuir model was used to model the adsorption equilibrium. Vermiculite under 1 mm of diameter (SF), Na-X, and Na-A were proved to be the most suitable for the individual uptake of studied metal ions. It was observed that the behavior of selenium ions differed from the remaining ones which was interpreted that selenium undergoes adsorption in the anionic form. The fixed-bed column studies were performed using Na-A, ensuring the sorption of selenium in the presence of iron(III) ions. The experiments were conducted using Na-X zeolite pre-loaded by Fe(III) as well as unmodified sorbent eluted by an equimolar mixture containing 100 ppm of Fe and Se. Obtained results prove that selenium sorption improves if other metal ions such as iron appear in the acidic solution. That efficient selenium sorption conditions can be applied to remove selenium which was recognized as toxic at higher levels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The open network of negatively charged silanol groups on the fiber surface presents spaces large enough to accommodate adsorbed metal cations.”
From Asbestos and Iron (2023) · cites this paper as [32]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“While a hydroxylated surface complexes numerous different cations, a preference for iron is frequently demonstrated [29,30,31,32].”
From Asbestos and Iron (2023) · cites this paper as [32]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Low-cost adsorbents for heavy metals uptake from contaminated water: a review
Babel, S. (2003) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(02)00263-7 · Cited by 3,444
Natural zeolites as effective adsorbents in water and wastewater treatment
Wang, S., & Peng, Y. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.10.029 · Cited by 2,441 · cited 1×
“Their sorption abilities have already been extensively studied by many authors [34].”
BackgroundA review on the adsorption of heavy metals by clay minerals, with special focus on the past decade
Uddin, M. K. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.029 · Cited by 2,108 · cited 1×
“Their performances were tested by batch experiments for removing of different heavy metals from aqueous solutions [23,24].”
BackgroundIonic radii in aqueous solutions
Marcus, Y. (1988) · Chemical Reviews · doi:10.1021/cr00090a003 · Cited by 1,771 · cited 1×
“Due to extremely similar ionic radii of involved metal cations [47] these differences can be explained only on a ground of unknown molecular mechanisms resulting in specific sorbate-sorbent interactions.”
BackgroundThe removal of heavy metal cations by natural zeolites
Erdem, E., Karapinar, N., & Donat, R. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.08.028 · Cited by 1,598
Ahmaruzzaman, M. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.04.005 · Cited by 755
A review on the application of clay minerals as heavy metal adsorbents for remediation purposes
Otunola, B. O., & Ololade, O. O. (2020) · Environmental Technology & Innovation · doi:10.1016/j.eti.2020.100692 · Cited by 418
A critical review of thermodynamic data for selenium species at 25°C
Séby, F., Potin-Gautier, M., Giffaut, E., Borge, G., & Donard, O. F. X. (2001) · Chemical Geology · doi:10.1016/s0009-2541(00)00246-1 · Cited by 309 · cited 1×
“19 [49,50] therefore in solution after mixing of solutions containing 100 ppm of ions, the product of the molar concentration of ions (1.”
BackgroundSorption of selenium(IV) and selenium(VI) onto natural iron oxides: Goethite and hematite
Rovira, M., Giménez, J., Martínez, M., Martínez-Lladó, X., de Pablo, J., Martí, V., & Duro, L. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.04.098 · Cited by 298 · cited 2×
“Furthermore, it was proven that synthetic and natural iron oxy-hydroxides such as magnetite, hematite, and goethite posses high sorption capacities for selenium [64].”
BackgroundAdsorption of heavy metals on vermiculite: Influence of pH and organic ligands
Malandrino, M., Abollino, O., Giacomino, A., Aceto, M., & Mentasti, E. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.03.011 · Cited by 291 · cited 1×
“The removal of heavy metal ions (chromium(III), lead(II) and zinc(II) by vermiculite was studied taking into account the effect of various factors like pH value and initial ion concentration [20,21].”
BackgroundBleiman, N., & Mishael, Y. G. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.07.065 · Cited by 253 · cited 2×
“However, ion-exchange resins appear to be not efficient with an increasing concentration of co petitive ions [52,53].”
BackgroundMechanical and durability properties of concretes incorporating natural zeolite
Markiv, T., Sobol, K., Franus, M., & Franus, W. (2016) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2016.03.013 · Cited by 180 · cited 2×
“Natural clinoptilolite came from Sokyrnytsya deposit (Transcarpathian region, Ukraine) [43] and has particles diameter 0.2 mm.”
BackgroundInfluentialEnvironmental characteristics of clay and clay-based minerals
Aboudi Mana, S. C., Hanafiah, M. M., & Chowdhury, A. J. K. (2017) · Geology, Ecology, and Landscapes · doi:10.1080/24749508.2017.1361128 · Cited by 160 · cited 1×
“Clays have been extensively applied in various applications as: colloid stabilizers, catalysts, chemical supports, coatings, drilling agents, construction materials, filling, geological applications and agriculture [18].”
BackgroundMasindi, V., & Mugera, G. W. (2015) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2015.08.016 · Cited by 128 · cited 1×
“Additionally, there are some proofs that clays can be used as adsorbents for heavy metals and other pollutants from water and other media [19].”
BackgroundSaja, S., Bouazizi, A., Achiou, B., Ouammou, M., Albizane, A., Bennazha, J., & Younssi, S. A. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.12.004 · Cited by 122 · cited 1×
“It has highly developed surface area [25].”
Adsorption of heavy metal ions (Cu2+, Ni2+, Co2+ and Fe2+) from aqueous solutions by natural zeolite
Belova, T. P. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02320 · Cited by 118
El-Shahawi, M. S., & Al‐Saidi, H. M. (2012) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2012.10.011 · Cited by 111
Arpadjan, S., Vuchkova, L., & Kostadinova, E. (1997) · The Analyst · doi:10.1039/a606917g · Cited by 105 · cited 1×
“The determination of trace amounts of Se utilizes high sorption capacity of solid materials such as non-polar (C-18) sorbent [57], nano-Al2O3 [58], modified activated carbon [59], cetyltrimethylammonium bromide (CTAB)-modified alkyl silica [60], Dowex 1X2 resin [61], dithiocarbamate loaded polyurethane foam [62], or d…”
BackgroundYu, Z., Qi, T., Qu, J., Wang, L., & Chu, J. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.12.140 · Cited by 102
XIONG, C., He, M., & Hu, B. (2008) · Talanta · doi:10.1016/j.talanta.2008.04.031 · Cited by 100 · cited 1×
“The determination of trace amounts of Se utilizes high sorption capacity of solid materials such as non-polar (C-18) sorbent [57], nano-Al2O3 [58], modified activated carbon [59], cetyltrimethylammonium bromide (CTAB)-modified alkyl silica [60], Dowex 1X2 resin [61], dithiocarbamate loaded polyurethane foam [62], or d…”
BackgroundSis, H., & Uysal, T. (2014) · Applied Clay Science · doi:10.1016/j.clay.2014.03.018 · Cited by 98 · cited 1×
“The removal of heavy metal ions (chromium(III), lead(II) and zinc(II) by vermiculite was studied taking into account the effect of various factors like pH value and initial ion concentration [20,21].”
BackgroundOter, O., & Akcay, H. (2007) · Water Environment Research · doi:10.2175/106143006x111880 · Cited by 97
Synthetic zeolites from fly ash for an effective trapping of BTX in gas stream
Bandura, L., Panek, R., Rotko, M., & Franus, W. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.10.032 · Cited by 92 · cited 1×
“, using fly ash from coal combustion [36,37].”
MethodSelf-citationAthanasiadis, K., & Helmreich, B. (2005) · Water Research · doi:10.1016/j.watres.2005.01.024 · Cited by 91 · cited 1×
“The above cations may be exchanged with other ions present in the solution [29,30].”
BackgroundRecovery of Metals from Acid Mine Drainage
Mačingová, E., & Luptáková, A. (2012) · Chemical engineering transactions · doi:10.3303/cet1228019 · Cited by 79
Characterization and Utilization of Natural Zeolites in Technical Applications
Stocker, K., Ellersdorfer, M., Lehner, M., & Raith, J. G. (2017) · BHM Berg- und Hüttenmännische Monatshefte · doi:10.1007/s00501-017-0596-5 · Cited by 77
Selenite and Selenate Speciation in Natural Waters: Interaction with Divalent Metal Ions
Torres, J., Pintos, V., Domínguez, S., Kremer, C., & Kremer, E. (2010) · Journal of Solution Chemistry · doi:10.1007/s10953-009-9491-3 · Cited by 75 · cited 1×
“19 [49,50] therefore in solution after mixing of solutions containing 100 ppm of ions, the product of the molar concentration of ions (1.”
BackgroundZinicovscaia, I. I., Yushin, N. S., Abdusamadzoda, D., Grozdov, D., & Shvetsova, M. S. (2020) · Materials · doi:10.3390/ma13163624 · Cited by 72
(2003) · Food Process Design · doi:10.1201/9780203912010.ch10 · Cited by 72
Opiso, E. M., Satō, T., & Yoneda, T. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.05.001 · Cited by 71 · cited 2×
“In the case of adsorption on the ineral surface, retention is unstable because the surrounding environment decreases already adsorbed ions [54].”
BackgroundEnvironmental Remediation by Crystallization of Solid Solutions
Rubio, M. P., Astilleros, J. M., & Fernández-Díaz, L. (2013) · Elements · doi:10.2113/gselements.9.3.195 · Cited by 68 · cited 2×
“Another reagent commonly uses in co-precipitation of selenium (IV) ions is ammonium pyrrolidinedithiocarbamate (APDC) [56].”
BackgroundEffective Removal of Selenite and Selenate Ions from Aqueous Solution by Barite
Tokunaga, K., & Takahashi, Y. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b01219 · Cited by 65 · cited 1×
“Tokunaga and Takahashi proposed the incorporation of both Se(IV) and Se(VI) anions in mineral lattice during coprecipitation with toxic barite (BaSO4) [55].”
BackgroundKunecki, P., Panek, R., Wdowin, M., & Franus, W. (2017) · International Journal of Mineral Processing · doi:10.1016/j.minpro.2017.07.007 · Cited by 63 · cited 1×
“, using fly ash from coal combustion [36,37].”
MethodSelf-citationKara, D., Fisher, A., & Hill, S. J. (2005) · The Analyst · doi:10.1039/b508841k · Cited by 60
Influence of Wooden Sawdust Treatments on Cu(II) and Zn(II) Removal from Water
Kováčová, Z., Demčák, Š., Bálintová, M., Pla, C., & Zinicovscaia, I. I. (2020) · Materials · doi:10.3390/ma13163575 · Cited by 60
Adsorption of selenite and selenate ions onto thiourea‐formaldehyde resin
Gezer, N., Gülfen, M., & Aydın, A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34246 · Cited by 55 · cited 2×
“However, ion-exchange resins appear to be not efficient with an increasing concentration of co petitive ions [52,53].”
BackgroundKunecki, P., Panek, R., Koteja, A., & Franus, W. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.02.043 · Cited by 52 · cited 1×
“2 mm) are the synthetic zeolites which were produced in the hydrothermal conversion of fly ash after coal combustion [44,45].”
BackgroundSelf-citationKunecki, P., Panek, R., Wdowin, M., Bień, T., & Franus, W. (2020) · International Journal of Coal Science & Technology · doi:10.1007/s40789-020-00332-1 · Cited by 52
Self-citationSkorek, R., Turek, E., Zawisza, B., Marguí, E., Queralt, I., Stempin, M., Kucharski, P., & Sitko, R. (2012) · Journal of Analytical Atomic Spectrometry · doi:10.1039/c2ja30179b · Cited by 47 · cited 3×
“Unfortunately, changes in Se content are not possible to notice because of the chemical interferences from Mg and Al, present sorbent before sorption [51].”
BackgroundDerkowski, A., Środoń, J., Franus, W., Uhlík, P., Banaś, M., Zieliński, G., Čaplovičová, M., & Franus, M. (2009) · Clays and Clay Minerals · doi:10.1346/ccmn.2009.0570503 · Cited by 42 · cited 1×
“Glauconite was magnetically separated from tertiary sandy sediments of the Lublin Upland (Poland)—Nowodwór Mine (63–125 μm) [42].”
BackgroundRizk, H. E., Ahmed, I. M., & Metwally, S. S. (2017) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2017.12.014 · Cited by 39 · cited 1×
“Additionally, perlites are used in heavy metals removal (for example cadmium(II), molybdenum(VI), cobalt(II) copper(II) and chromium(III)) [28].”
BackgroundBouazza, D., Miloudi, H., Adjdir, M., Tayeb, A., & Boos, A. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.10.026 · Cited by 37 · cited 1×
“Their performances were tested by batch experiments for removing of different heavy metals from aqueous solutions [23,24].”
BackgroundSynthetic Nax Zeolite as a Very Efficient Heavy Metals Sorbent in Batch and Dynamic Conditions
Ezzeddine, Z., Batonneau‐Gener, I., Pouilloux, Y., Hamad, H., & Saad, Z. (2018) · Colloids and Interfaces · doi:10.3390/colloids2020022 · Cited by 37
Ahmed, I. M., Hamed, M. M., & Metwally, S. S. (2020) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2019.12.027 · Cited by 37
Selenium oxyanions: Highly selective uptake by a novel anion exchanger
Kozai, N., Ohnuki, T., & Komarneni, S. (2002) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2002.0433 · Cited by 34 · cited 1×
“01 mg/L in the United States and Japan, respectively) [65].”
BackgroundApplications of chelating resin for heavy metal removal from wastewater
Jiang, J., Ma, X., Xu, L., Wang, L., Liu, G., Xu, Q., Lu, J., & Zhang, Y. (2015) · e-Polymers · doi:10.1515/epoly-2014-0192 · Cited by 34
Inorganic selenium speciation in groundwaters by solid phase extraction on Dowex 1X2
Lin, T. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.03.050 · Cited by 33 · cited 1×
“The determination of trace amounts of Se utilizes high sorption capacity of solid materials such as non-polar (C-18) sorbent [57], nano-Al2O3 [58], modified activated carbon [59], cetyltrimethylammonium bromide (CTAB)-modified alkyl silica [60], Dowex 1X2 resin [61], dithiocarbamate loaded polyurethane foam [62], or d…”
BackgroundLonsdale, H. K. (1985) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)80148-9 · Cited by 29
Mono and Poly-Cationic Adsorption of Heavy Metals Using Natural Glauconite
Franus, M., Bandura, L., & Madej, J. (2019) · Minerals · doi:10.3390/min9080470 · Cited by 26
Self-citationUrbánková, K., Moos, M., Machát, J., & Sommer, L. (2011) · International Journal of Environmental & Analytical Chemistry · doi:10.1080/03067311003782666 · Cited by 24 · cited 1×
“The determination of trace amounts of Se utilizes high sorption capacity of solid materials such as non-polar (C-18) sorbent [57], nano-Al2O3 [58], modified activated carbon [59], cetyltrimethylammonium bromide (CTAB)-modified alkyl silica [60], Dowex 1X2 resin [61], dithiocarbamate loaded polyurethane foam [62], or d…”
BackgroundTsoi, Y., & Leung, K. S. (2011) · Journal of Chromatography A · doi:10.1016/j.chroma.2011.02.016 · Cited by 22 · cited 1×
“The determination of trace amounts of Se utilizes high sorption capacity of solid materials such as non-polar (C-18) sorbent [57], nano-Al2O3 [58], modified activated carbon [59], cetyltrimethylammonium bromide (CTAB)-modified alkyl silica [60], Dowex 1X2 resin [61], dithiocarbamate loaded polyurethane foam [62], or d…”
BackgroundStyczeń, J., Barnat-Hunek, D., Panek, R., & Franus, W. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120016 · Cited by 20 · cited 1×
“Due to its characteristics it can be used in various branch of applications, for example: building materials, efficient filter aid and filler in several processes and materials [26,27].”
BackgroundSelf-citationCation sieve properties of natural heulandite
Joshi, M. S., & Rao, P. M. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90080-2 · Cited by 15
Liu, Q. (2010) · Open Chemistry · doi:10.2478/s11532-009-0132-x · Cited by 14 · cited 1×
“The determination of trace amounts of Se utilizes high sorption capacity of solid materials such as non-polar (C-18) sorbent [57], nano-Al2O3 [58], modified activated carbon [59], cetyltrimethylammonium bromide (CTAB)-modified alkyl silica [60], Dowex 1X2 resin [61], dithiocarbamate loaded polyurethane foam [62], or d…”
BackgroundChwastowska, J., Skwara, W., Dudek, J., Sterlińska, E., & Pszonicki, L. (2007) · Chemia Analityczna · Cited by 3
Study on utilization of zeolite in concrete precast industry
Figmig, R., & Kováč, M. (2019) · Selected scientific papers · doi:10.1515/sspjce-2019-0010 · Cited by 2 · cited 1×
“Natural zeolites occur in hydrated forms, such as clinoptilolite (K2Na2Ca)2 [(Al6Si30)O72]·24H2O [32,33].”
BackgroundKatoh, M., Horiuchi, K., Satoh, A., Aoyagi, K., & Sugiyama, S. (2019) · Journal of Encapsulation and Adsorption Sciences · doi:10.4236/jeas.2019.94008 · Cited by 1 · cited 1×
“Natural zeolites occur in hydrated forms, such as clinoptilolite (K2Na2Ca)2 [(Al6Si30)O72]·24H2O [32,33].”
Background
Research works printed but not linked: 8
- Geselbarcht, J. (1996, January 25–28). Micro Filtration/Reverse Osmosis Pilot Trials for Livermore, California, Advanced Water Reclamation. Proceedings of the 1996 Water Reuse Conference Proceedings, AWWA, San Diego, CA, USA.
- Franus, 2014, Sorption of heavy metal ions from aqueous solution by glauconite, Fresenius Environ. Bull., 23, 825
- Bandura, 2015, Characterization of zeolites and their use as adsorbents of petroleum substances, Przem. Chem., 3, 323
- Barer, R.M. (1987). Zeolites and Clay Minerals as Sorbent and Molecular Sieves, Academic Press.
- Franus, 1999, Clay minerals and clinoptilolite of variegated shales formation of the skole unit, Pol. Flysch Carpathians. Geol. Carpath., 50, 23
- Milosevic, S., and Tomasevic-Canovic, M. (2004, January 2). Modification of the surface of minerals for development the materials-adsorbents. Proceedings of the 36th International October Conference on Mining and Metallurgy, Bor, Serbia and Montenegro.
- Crank, J. (1975). Mathematics of Diffusion, Clarendon Press. [2nd ed.].
- Suzuki, M. (1990). Adsorption Engineering, Kodansha, Elsevier.
Cited by
Singh, A., Chauhan, S. K., Varjani, S., Pandey, A., & Chaturvedi, P. (2022) · Environmental Research · doi:10.1016/j.envres.2022.112844 · Cited by 50
Liu, Z., Wang, L., Lv, Y., Xu, X., Zhu, C., Liu, F., & Li, A. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129684 · Cited by 35
Alassod, A., Islam, S. R., Shahriari‐Khalaji, M., Tusiime, R., Huang, W., & Xu, G. (2021) · Materials · doi:10.3390/ma14143950 · Cited by 28
Suručić, L. T., Janjić, G. V., Marković, B. M., Tadić, T. T., Vuković, Z. M., Nastasović, A. B., & Onjia, A. E. (2023) · Materials · doi:10.3390/ma16062233 · Cited by 28
Functionalization of Zeolite NaP1 for Simultaneous Acid Red 18 and Cu(II) Removal
Bień, T., Kołodyńska, D., & Franus, W. (2021) · Materials · doi:10.3390/ma14247817 · Cited by 18
Metadata
- Authors
- Flieger, J., Kawka, J., Płaziński, W., Panek, R., & Madej, J.
- Affiliations
- Medical University of Lublin (PL)
- Jerzy Haber Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences (PL)
- Lublin University of Technology (PL)
- Corresponding author
- Flieger, Jolanta
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2020-11-21
- Volume
- 13
- Issue
- 22
- Pages
- 5271
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC7700620
- OpenAlex
- W3106690682
- Cited by
- 37
- References
- 59
- Citations by year
- 2026: 1 · 2025: 5 · 2024: 5 · 2023: 10 · 2022: 8 · 2021: 8
- FWCI
- 1.99
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Fundacja na rzecz Nauki Polskiej (POIR.04.04.00-00-14E6/18-00)
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Environmental Science › Waste Management and Disposal › Chemical Synthesis and Characterization
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Keywords
- heavy metal adsorption, acidic aqueous solutions, aluminosilicate sorbents, zeolites, vermiculite, chromium, manganese, selenium, nickel, cobalt, iron, fixed-bed column, Langmuir isotherm, metal ion competition
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.