The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Pyrolytic Conversion of Plastic Waste to Value-Added Products and Fuels: A Review
Open accessAbstract
Plastic production has been rapidly growing across the world and, at the end of their use, many of the plastic products become waste disposed of in landfills or dispersed, causing serious environmental and health issues. From a sustainability point of view, the conversion of plastic waste to fuels or, better yet, to individual monomers, leads to a much greener waste management compared to landfill disposal. In this paper, we systematically review the potential of pyrolysis as an effective thermochemical conversion method for the valorization of plastic waste. Different pyrolysis types, along with the influence of operating conditions, e.g., catalyst types, temperature, vapor residence time, and plastic waste types, on yields, quality, and applications of the cracking plastic products are discussed. The quality of pyrolysis plastic oil, before and after upgrading, is compared to conventional diesel fuel. Plastic oil yields as high as 95 wt.% can be achieved through slow pyrolysis. Plastic oil has a heating value approximately equivalent to that of diesel fuel, i.e., 45 MJ/kg, no sulfur, a very low water and ash content, and an almost neutral pH, making it a promising alternative to conventional petroleum-based fuels. This oil, as-is or after minor modifications, can be readily used in conventional diesel engines. Fast pyrolysis mainly produces wax rather than oil. However, in the presence of a suitable catalyst, waxy products further crack into oil. Wax is an intermediate feedstock and can be used in fluid catalytic cracking (FCC) units to produce fuel or other valuable petrochemical products. Flash pyrolysis of plastic waste, performed at high temperatures, i.e., near 1000 °C, and with very short vapor residence times, i.e., less than 250 ms, can recover up to 50 wt.% ethylene monomers from polyethylene waste. Alternatively, pyrolytic conversion of plastic waste to olefins can be performed in two stages, with the conversion of plastic waste to plastic oil, followed by thermal cracking of oil to monomers in a second stage. The conversion of plastic waste to carbon nanotubes, representing a higher-value product than fuel, is also discussed in detail. The results indicate that up to 25 wt.% of waste plastic can be converted into carbon nanotubes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Thermochemical conversion of plastic waste to fuels: A review
Nanda, S., & Berruti, F. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01094-7 · Cited by 383
Self-citationWang, J., Shen, B., Lan, M., Kang, D., & Wu, C. (2020) · Catalysis Today · doi:10.1016/j.cattod.2019.01.058 · Cited by 178
Application of biochar for acid gas removal: experimental and statistical analysis using CO2
Bamdad, H., Hawboldt, K., MacQuarrie, S., & Papari, S. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-04509-3 · Cited by 42
Self-citation
Cited by
A review on catalytic pyrolysis of plastic wastes to high-value products
Peng, Y., Wang, Y., Ke, L., Dai, L., Wu, Q., Cobb, K., Zeng, Y., Zou, R., Liu, Y., & Ruan, R. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115243 · Cited by 538
Innovations in applications and prospects of bioplastics and biopolymers: a review
Nanda, S., Patra, B. R., Patel, R., Bakos, J., & Dalai, A. K. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01334-4 · Cited by 478
Kusenberg, M., Eschenbacher, A., Djokic, M. R., Zayoud, A., Ragaert, K., De Meester, S., & Van Geem, K. M. (2022) · Waste Management · doi:10.1016/j.wasman.2021.11.009 · Cited by 319
Plastic waste as pyrolysis feedstock for plastic oil production: A review
Chang, S. H. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.162719 · Cited by 302
Transforming Plastic Waste into Porous Carbon for Capturing Carbon Dioxide: A Review
Hussin, F., Aroua, M. K., Kassim, M. A., & Md. Ali, U. F. (2021) · Energies · doi:10.3390/en14248421 · Cited by 84
Metadata
- Authors
- Papari, S., Bamdad, H., & Berruti, F.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2021-05-16
- Volume
- 14
- Issue
- 10
- Pages
- 2586
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W3162575831
- Cited by
- 228
- References
- 4
- FWCI
- 10.15
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.