Predicting Mechanical Properties of High-Performance Fiber-Reinforced Cementitious Composites by Integrating Micromechanics and Machine Learning
Open accessThe DOI matches its Crossref record; 74 of the 75 references it cites were found in a registry or an index.
Abstract
Current development of high-performance fiber-reinforced cementitious composites (HPFRCC) mainly relies on intensive experiments. The main purpose of this study is to develop a machine learning method for effective and efficient discovery and development of HPFRCC. Specifically, this research develops machine learning models to predict the mechanical properties of HPFRCC through innovative incorporation of micromechanics, aiming to increase the prediction accuracy and generalization performance by enriching and improving the datasets through data cleaning, principal component analysis (PCA), and K-fold cross-validation. This study considers a total of 14 different mix design variables and predicts the ductility of HPFRCC for the first time, in addition to the compressive and tensile strengths. Different types of machine learning methods are investigated and compared, including artificial neural network (ANN), support vector regression (SVR), classification and regression tree (CART), and extreme gradient boosting tree (XGBoost). The results show that the developed machine learning models can reasonably predict the concerned mechanical properties and can be applied to perform parametric studies for the effects of different mix design variables on the mechanical properties. This study is expected to greatly promote efficient discovery and development of HPFRCC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








![Figure 9 Comparison of the prediction against the test results: (a) compressive strength [77]; (b) tensile strength [22]; and (c) tensile strain capacity [63].](https://figures.cochat.ai/paper-figures/766a584c3608442899ff66d1a6984e1c/predicting-mechanical-properties-of-high-performance-fiber-reinforced-figure-9.jpg)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Specifically, physical laws describing micromechanical responses 139 , degradation mechanisms 104,140 , and chemical reactivity 141 have been utilized for data preprocessing (e.g., feature selection, feature engineering, and data augmentation) during the development of ML models in concrete research.”
From Machine learning in concrete science: applications, challenges, and best practices (2022) · cites this paper as [139]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
In Defense of Multiplicative Terms in Multiple Regression Equations
Friedrich, R. J. (1982) · American Journal of Political Science · doi:10.2307/2110973 · Cited by 1,059 · cited 1×
“Multicollinearity and Principal Component Analysis Multicollinearity may occur in high-dimension analysis and compromise the statistical significance of independent variables [69].”
BackgroundImproving support vector machine classifiers by modifying kernel functions
Amari, S., & Wu, S. (1999) · Neural Networks · doi:10.1016/s0893-6080(99)00032-5 · Cited by 936 · cited 2×
“Compared with the conventional regression methods, SVR employs kernel functions that enable the model to solve complex, non-linear problems because the relationships between some variables cannot be described using linear functions [43].”
Method(2002) · ACI Materials Journal · doi:10.14359/12325 · Cited by 761 · cited 2×
“where Jtip is the toughness of the matrix, and Jtip = Km(2)/Em; Em is the modulus of elasticity of the matrix; Km is the fracture toughness of the matrix, which can be tested using beams with a notch under three-point bending [22]; σss is the tensile strength under steady-state crack propagation process; and δss is th…”
BackgroundSelf-citationEnsemble Machine Learning: Methods and Applications
(2012) · doi:10.1007/978-1-4419-9326-7 · Cited by 746
Naderpour, H., Rafiean, A. H., & Fakharian, P. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.01.007 · Cited by 603 · cited 1×
“For example, an artificial neural network (ANN) was used to predict the compressive strength by using the water-to-cement ratio, the fly ash content, and the aggregate content [30].”
MethodA strain-hardening cementitious composites with the tensile capacity up to 8%
Yu, K., Wang, Y., Yu, J., & Xu, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.060 · Cited by 582
Fiber-Bridging Constitutive Law of Engineered Cementitious Composites
Yang, E.-H., Wang, S., Yang, Y., & Li, V. C. (2008) · Journal of Advanced Concrete Technology · doi:10.3151/jact.6.181 · Cited by 535 · cited 3×
“The toughness of the matrix must be less than the complementary energy from the fiber bridging [20].”
BackgroundSelf-citationMachine learning in concrete strength simulations: Multi-nation data analytics
Chou, J.-S., Tsai, C.-F., Pham, A.-D., & Lu, Y.-H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.09.054 · Cited by 472 · cited 4×
“Given a dataset with known mix designs and the corresponding mechanical properties, the weights and the bias are determined to minimize the discrepancy between the predicted and real mechanical properties through an optimization process [40], which is known as the training process.”
MethodInfluentialA Coefficient of Determination for Generalized Linear Models
Zhang, D. (2017) · The American Statistician · doi:10.1080/00031305.2016.1256839 · Cited by 444
Predicting compressive strength of lightweight foamed concrete using extreme learning machine model
Yaseen, Z. M., Deo, R. C., Hilal, A., Abd, A. M., Bueno, L. C., Salcedo-Sanz, S., & Nehdi, M. L. (2018) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2017.09.004 · Cited by 434 · cited 2×
“, compressive strength) using a regression relationship [41].”
Method
Research works printed but not linked: 2
- 45. Lewis, R.J. An introduction to classification and regression tree (CART) analysis. In Proceedings of the Annual Meeting of the Society for Academic Emergency Medicine in San Francisco, San Francisco, CA, USA, 22-25 May 2000. Available online: http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.95.4103 (accessed on 1 March 2021).
- 70. Tabachnick, B.G.; Fidell, L.S.; Ullman, J.B. Using Multivariate Statistics ; Pearson: Boston, MA, USA, 2007; Volume 5. Available online: https://www.pearsonhighered.com/assets/preface/0/1/3/4/0134790545.pdf (accessed on 1 March 2021).
Cited by
Machine Learning for Structural Engineering: A State-of-the-Art Review
Thai, H.-T. (2022) · Structures · doi:10.1016/j.istruc.2022.02.003 · Cited by 748
Machine learning in concrete science: applications, challenges, and best practices
Li, Z., Yoon, J., Zhang, R., Rajabipour, F., Srubar III, W. V., Dabo, I., & Radlińska, A. (2022) · npj Computational Materials · doi:10.1038/s41524-022-00810-x · Cited by 388
Artificial Intelligence in Predicting Mechanical Properties of Composite Materials
Kibrete, F., Trzepieciński, T., Gebremedhen, H. S., & Woldemichael, D. E. (2023) · Journal of Composites Science · doi:10.3390/jcs7090364 · Cited by 249
AI-guided auto-discovery of low-carbon cost-effective ultra-high performance concrete (UHPC)
Mahjoubi, S., Barhemat, R., Meng, W., & Bao, Y. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106741 · Cited by 172
Self-citationReview on automated condition assessment of pipelines with machine learning
Liu, Y., & Bao, Y. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101687 · Cited by 165
Self-citationPrediction of FRP-concrete interfacial bond strength based on machine learning
Zhang, F., Wang, C., Liu, J., Zou, X., Sneed, L. H., Bao, Y., & Wang, L. (2022) · Engineering Structures · doi:10.1016/j.engstruct.2022.115156 · Cited by 141
Self-citationMahjoubi, S., Barhemat, R., Guo, P., Meng, W., & Bao, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.129665 · Cited by 131
Self-citationShear strength prediction of reinforced concrete beams using machine learning
Sandeep, M. S., Tiprak, K., Kaewunruen, S., Pheinsusom, P., & Pansuk, W. (2022) · Structures · doi:10.1016/j.istruc.2022.11.140 · Cited by 142
Okafor, C. E., Iweriolor, S., Ani, O. I., Ahmad, S., Mehfuz, S., Ekwueme, G. O., Chukwumuanya, O. E., Abonyi, S. E., Ekengwu, I. E., & Chikelu, P. O. (2023) · Hybrid Advances · doi:10.1016/j.hybadv.2023.100026 · Cited by 121
Mahjoubi, S., Meng, W., & Bao, Y. (2021) · Applied Soft Computing · doi:10.1016/j.asoc.2021.108182 · Cited by 130
Self-citationAlabduljabbar, H., Khan, M., Awan, H. H., Eldin, S. M., Alyousef, R., & Mohamed, A. M. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02074 · Cited by 109
Qin, S., Zhang, J., Huang, C., Gao, L., & Bao, Y. (2022) · Engineering Structures · doi:10.1016/j.engstruct.2022.113875 · Cited by 81
Self-citationNew opportunity: Materials genome strategy for engineered cementitious composites (ECC) design
Chen, W., Liang, L., Jiang, F., Tang, Z., Sun, X., Yu, J., Li, V. C., & Yu, K. (2025) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2025.106009 · Cited by 77
Self-citationde‐Prado‐Gil, J., Palencia, C., Jagadesh, P., & Martínez‐García, R. (2022) · Materials · doi:10.3390/ma15124164 · Cited by 74
“Figure 7 shows the predictive behavior of the XG Boost model, with it outperforming the GB, CB, and ETR models with regards to the R2 value, as well as having the lowest values for root mean square error and mean average error, which indicates that the XG Boost model presents a good fit for the prediction of 28-day sp…”
BackgroundMethodResultInfluentialShanmugasundaram, N., Praveenkumar, S., Gayathiri, K., & Divya, S. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127933 · Cited by 61
Dev, B., Rahman, M. A., Islam, M. J., Rahman, M. Z., & Zhu, D. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.107659 · Cited by 73
Real-time remote measurement of distance using ultra-wideband (UWB) sensors
Liu, Y., & Bao, Y. (2023) · Automation in Construction · doi:10.1016/j.autcon.2023.104849 · Cited by 63
Self-citationRehman, F., Khokhar, S. A., & Khushnood, R. A. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01536 · Cited by 49
Ahmed, A., Uddin, M. N., Akbar, M., Salih, R., Khan, M. A., Bisheh, H., & Rabczuk, T. (2023) · International Journal of Mechanics and Materials in Design · doi:10.1007/s10999-023-09675-4 · Cited by 57
Knowledge-Guided Data-Driven Design of Ultra-High-Performance Geopolymer (Uhpg)
Guo, P., Meng, W., & Bao, Y. (2024) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2024.105723 · Cited by 50
Self-citationFan, D., Chen, Z., Cao, Y., Liu, K., Yin, T., Lv, X., Lu, J., Zhou, A., Poon, C. S., & Yu, R. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108555 · Cited by 46
Basílio, S. D. C. A., & Goliatt, L. (2022) · Knowledge-Based Engineering and Sciences · doi:10.51526/kbes.2022.3.1.1-16 · Cited by 43
Dahish, H. A., Alfawzan, M., Tayeh, B. A., Abusogi, M. A., & Bakri, M. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02153 · Cited by 41
Alarfaj, M., Qureshi, H. J., Shahab, M. Z., Javed, M. F., Arifuzzaman, M., & Gamil, Y. (2024) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02836 · Cited by 58
Zhao, Y., Chen, Z., & Jian, X. (2023) · Polymers · doi:10.3390/polym15193962 · Cited by 35
Guo, P., Meng, W., & Bao, Y. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.136502 · Cited by 41
Self-citationMachine learning-based prediction of compressive strength for limestone calcined clay cements
Khessaimi, Y. E., Hafiane, Y. E., Smith, A., Peyratout, C. S., Tamine, K., Adly, S., & Barkatou, M. A. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.107062 · Cited by 36
Tan, X. H., Mahjoubi, S., Zhang, Q., Dong, D., & Bao, Y. (2022) · Journal of Infrastructure Preservation and Resilience · doi:10.1186/s43065-022-00067-0 · Cited by 34
Self-citationAdvances in polymer composites, manufacturing, recycling, and sustainable practices
Paraye, P., & Sarviya, R. M. (2024) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2024.2339295 · Cited by 33
Wijaya, A., Wagner, J., Sartory, B., & Brunner, R. (2024) · Communications Materials · doi:10.1038/s43246-024-00493-5 · Cited by 36
Guo, P., Meng, W., & Bao, Y. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.134812 · Cited by 34
Self-citationTan, X., Xing, J., Wang, Y., Qiu, H., Mahjoubi, S., & Guo, P. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.147338 · Cited by 31
Self-citationGuo, P., Mahjoubi, S., Liu, K., Meng, W., & Bao, Y. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02625 · Cited by 56
Self-citationReview of AI-assisted design of low-carbon cost-effective concrete toward carbon neutrality
Mahjoubi, S., Barhemat, R., Meng, W., & Bao, Y. (2025) · Artificial Intelligence Review · doi:10.1007/s10462-025-11182-1 · Cited by 37
“For example, Guo et al. ( 2021) generated the mechanical properties of SHCC mixtures based on mathematical formulae which were established based on micromechanics linked the ductility of SHCC to the design variables of fibers.”
Self-citationA Predictive Mimicker of Fracture Behavior in Fiber Reinforced Concrete Using Machine Learning
Khokhar, S. A., Ahmed, T., Khushnood, R. A., Ali, S. M., & Shahnawaz (2021) · Materials · doi:10.3390/ma14247669 · Cited by 31
“These performance indicators of RMSE were more accurate than previously implemented models [12].”
BackgroundMethodResultInfluentialQin, S., Yu, L., Zhang, J., & Gao, L. (2022) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2022.107409 · Cited by 29
Mahjoubi, S., Barhemat, R., Meng, W., & Bao, Y. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.106870 · Cited by 31
Self-citationCan domain knowledge benefit machine learning for concrete property prediction?
Li, Z., Pei, T., Ying, W., Srubar, W. V., Zhang, R., Yoon, J., Ye, H., Dabo, I., & Radlińska, A. (2023) · Journal of the American Ceramic Society · doi:10.1111/jace.19549 · Cited by 35
Wang, Y., Sun, J., Wang, X., Li, S., Zhao, H., Huang, B. S., Cao, Y., & Saafi, M. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.110471 · Cited by 27
Li, X., Lü, X., Qi, J., & Bao, Y. (2022) · Engineering Structures · doi:10.1016/j.engstruct.2022.114305 · Cited by 28
Self-citationMachine Learning Approaches for Predicting the Ablation Performance of Ceramic Matrix Composites
Deb, J. B., Gou, J., Song, H., & Maiti, C. (2024) · Journal of Composites Science · doi:10.3390/jcs8030096 · Cited by 30
“Guo et al. [31] showed that the XGBoost regression algorithm is superior to artificial neural networks, support vector regression, classification, and regression trees when it comes to precisely forecasting the tensile strength, ductility, and compressive strength of high-performance…”
MethodAnsari, S. S., Ibrahim, S. M., & Hasan, S. D. (2024) · Journal of structural design and construction practice. · doi:10.1061/jsdccc.sceng-1496 · Cited by 26
Cradle-to-gate assessment and optimization of sustainable geopolymer concrete
Zhang, M., Guo, P., Tan, X., Du, J., Meng, W., & Bao, Y. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.147387 · Cited by 27
Self-citationMalik, U. J., Najam, F. A., Khokhar, S. A., Rehman, F., & Riaz, R. D. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02732 · Cited by 24
Applications of Machine Learning in Analysis and Design of Aerospace Composite Structures
You, C., Cai, Y., Wu, W., Zhang, H., Gao, X., & Song, Y. (2025) · Thin-Walled Structures · doi:10.1016/j.tws.2025.113914 · Cited by 30
Guo, P., Jiang, Z. S., Meng, W., & Bao, Y. (2025) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2025.106230 · Cited by 21
Self-citationLogic-guided neural network for predicting steel-concrete interfacial behaviors
Mahjoubi, S., Meng, W., & Bao, Y. (2022) · Expert Systems with Applications · doi:10.1016/j.eswa.2022.116820 · Cited by 22
Self-citationHuang, J.-X., Shi, X.-Z., Zhang, N., Hu, Y., & Wang, J. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.111136 · Cited by 21
ANN-based predictive mimicker for the constitutive model of engineered cementitious composites (ECC)
Malik, U. J., Khokhar, S. A., Hammad, M., Khushnood, R. A., Najam, F. A., Ali, F. A., & Shahid, M. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.135530 · Cited by 24
Tanyıldızı, H. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.122474 · Cited by 20
Uddin, M. N., Ye, J., Haque, M. A., Yu, K., & Li, L. (2024) · Multiscale and Multidisciplinary Modeling Experiments and Design · doi:10.1007/s41939-024-00439-x · Cited by 22
Chetbani, Y., Zaitri, R., Tayeh, B. A., Hakeem, I. Y., Dif, F., & Kellouche, Y. (2023) · Buildings · doi:10.3390/buildings13092290 · Cited by 16
Guo, P., Moghaddas, S. A., Liu, Y., Meng, W., Li, V. C., & Bao, Y. (2025) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2025.2462183 · Cited by 29
Self-citationTavasoli, S., Poorghasem, S., Pan, X., Yang, T. Y., & Bao, Y. (2024) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.13319 · Cited by 18
“The performance of the YOLOv8x model in detecting survivors is evaluated through popular metrics commonly used for object detection, including precision (Wang et al., 2021), recall (Guo et al., 2021), F1 score (Wang et al., 2021), and mAP (Yin et al., 2020).”
Self-citationVegetable Fibers in Cement Composites: A Bibliometric Analysis, Current Status, and Future Outlooks
Arvizu-Montes, A., & Martinez-Echevarria, M. J. (2025) · Materials · doi:10.3390/ma18020333 · Cited by 15
Jia, P., Sun, M., Lin, Y., & Yan, J. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.143686 · Cited by 13
Fatigue life prediction of corroded steel wires: An accurate and explainable data-driven approach
Li, H., Zhang, H., Zhou, J., Xia, R., Gong, Y., & Hu, T. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.138637 · Cited by 12
Pereira, F. A. D. S., Lopes, H., Pinto, L., Soares, F., Vasconcelos, R. M., Machado, J., & Carvalho, V. H. (2024) · Applied Sciences · doi:10.3390/app15010149 · Cited by 15
Dong, H., Linghu, J., & Nie, Y. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.116357 · Cited by 12
Wang, W., Xu, M., & Bao, Y. (2023) · Smart Materials and Structures · doi:10.1088/1361-665x/acc1ba · Cited by 12
Self-citationKhokhar, S. A., Memon, S., Ahmed, T., Basit, M. U., Najam, F. A., & Khushnood, R. A. (2024) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2024.e03129 · Cited by 11
Shanmugasundaram, N., & Praveenkumar, S. (2024) · Structural Concrete · doi:10.1002/suco.202400231 · Cited by 11
“23,24 Only 13 out of 178 samples attained greater than 20% variation, which means that 92.696% of the samples attained less than 20% variation.”
InfluentialMachine learning and sustainable geopolymer materials: A systematic review
Nguyen, H. A. T., Pham, D. H., Ahn, Y., Oo, B. L., & Lim, B. T. (2025) · Materials Today Sustainability · doi:10.1016/j.mtsust.2025.101095 · Cited by 24
Modeling the Tensile Behavior of Fiber-Reinforced Strain-Hardening Cement-Based Composites: A Review
Ribeiro, P. D. O., Krahl, P. A., Carrazedo, R., & Bernardo, L. F. A. (2023) · Materials · doi:10.3390/ma16093365 · Cited by 11
“, 2021 [83]; Abellán-García and Guzmán-Guzmán, 2021 [84], Marani, Jamali, Nehdi, 2020 [85]); and techniques based on the theory of homogenization with the development of multiscale models (Yu et al.”
MethodWani, S. R., & Suthar, M. (2024) · Asian Journal of Civil Engineering · doi:10.1007/s42107-024-01195-6 · Cited by 11
“With the goal to address this difficulty, ML algorithms have demonstrated promising outcomes in making concrete with extreme accuracy (Guo et al., 2021 ; Marani et al., 2020 ).”
Jiang, Z., Ran, Y., Xu, Z., Huang, S., Meng, W., & Bao, Y. (2025) · Automation in Construction · doi:10.1016/j.autcon.2025.106667 · Cited by 13
Self-citationLinghu, J., Dong, H., Gao, W., & Nie, Y. (2023) · Computer Physics Communications · doi:10.1016/j.cpc.2023.108969 · Cited by 9
Goliatt, L., Marhoon, H. A., Yaseen, Z. M., Heddam, S., Zand, A. W. A., Halder, B., Tan, M. L., Sa’adi, Z., Ahmadianfar, I., & Elsayed, S. (2025) · Transportation Geotechnics · doi:10.1016/j.trgeo.2025.101550 · Cited by 10
Braimah, J. I., Ajagbe, W. O., & Olonade, K. A. (2024) · AI in Civil Engineering · doi:10.1007/s43503-024-00033-7 · Cited by 9
“…algorithms cement assist in optimizing structural designs, while neural networks predict FEA results (Barbosa et al., 2020; Devadiga et al., 2019; Guo et al., 2021; Kabbani & Kadi, 2018; Krishnan et al., 2016; Kumar et al., 2017; Rajkumar et al., 2022; Sharan & M., 2022; Wang et al., 2021, 2022)…”
Rahman, M. M., Ismail, A. E., Ramli, M. F., Rashid, A. H. A., Khan, T., Ahmed, O. S., & Sebaey, T. A. (2026) · Journal of Composites Science · doi:10.3390/jcs10040212 · Cited by 10
Diniță, A., Roșca, C.-M., Tănase, M., & Stancu, A. (2025) · Computer Modeling in Engineering & Sciences · doi:10.32604/cmes.2025.066276 · Cited by 11
Khokhar, S. A., Shah, M. U., Rehman, F., Cheema, H. B., & Usman, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13191-2.00002-x · Cited by 7
Hu, Y., Chen, Y., Shi, X., Li, S., & Wang, J. (2025) · Proceedings of the Institution of Civil Engineers - Bridge Engineering · doi:10.1680/jbren.24.00056 · Cited by 6
Innovative approaches to fire-resistant building materials: a review
Bhadauria, P. K. S., Ranit, A., Chaudhary, P. S., Dongre, K. A., Harle, S. M., & Bhagat, A. P. (2025) · Life Cycle Reliability and Safety Engineering · doi:10.1007/s41872-025-00352-3 · Cited by 9
“Guo et al. (2021) leverages machine learning to enhance predictions of fiber-reinforced cemen-titious composite properties, while (Zhang et al. 2021b) study on UHPC underscores the effects of imperfect interfaces and inclusion sizes on elastic properties.”
Residual tensile strength in composite laminates: a deep learning approach
Lu, L., Wang, X., Ye, J., Shi, J., Li, Z., Shi, Y., & Ye, J. (2025) · Composite Structures · doi:10.1016/j.compstruct.2025.119681 · Cited by 5
Oliveira, R., Campos, D., Bicalho, K. V., Macêdo, B. D. S., Bodini, M., Saporetti, C. M., & Goliatt, L. (2025) · Forecasting · doi:10.3390/forecast7040080 · Cited by 5
“More recent research has highlighted the role of ensemble methods, especially gradient boosting, which combines weak learners into highly predictive models [3,25–27].”
Nguyen, Q. D., Nguyen, K. T., Tran, T. K., Lee, K., & Huynh, A. T. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e24704 · Cited by 6
Ihueze, C. C., Okoli, N. C., Onwurah, U. O., Okafor, C. E., & Kingsley-Omoyibo, Q. A. (2023) · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · doi:10.1177/09544089231167761 · Cited by 5
Harden and Self-Sensing Properties of Engineered Cementitious Composite Reinforced With Nano-Carbon
Divya, S., Praveenkumar, S., Shanmugasundaram, N., & Gayathiri, K. (2024) · Advances in chemical and materials engineering book series · doi:10.4018/978-1-6684-8182-0.ch004 · Cited by 4
Huang, X., Ma, H., Ren, X., Shen, Y., & Ba, M. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.112466 · Cited by 3
Yang, J., & Qi, Q. (2021) · Materials · doi:10.3390/ma14216542 · Cited by 3
“The independent variables could be reduced in dimensionality by the principal component analysis, and obtain the principal components [34,35].”
MethodLi, W., Huang, Z. M., & Pan, Z. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.112570 · Cited by 2
Rahman, M. M., Ismail, A. E., Ramli, M. F., & Rashid, A. H. A. (2026) · Functional Composites and Structures · doi:10.1088/2631-6331/ae5ebd · Cited by 2
Murad, M. S., Hamzat, A. K., Unlu, N. A., Altay, Ö., Bahçeci, E., Asmatulu, E., Bakır, M., & Asmatulu, R. (2026) · Machine learning for computational science and engineering · doi:10.1007/s44379-026-00069-9 · Cited by 2
“Historically destructive experimental techniques like tensile, flexural, stiffness, compression testing have been used to determine the mechanical properties of materials [1, 2].”
Strength prediction of mortar reinforced with babassu coconut fiber using artificial neural networks
Moraes, Y. A., de Oliveira, Á. H. R., & Picanço, M. D. S. (2025) · Ambiente Construído · doi:10.1590/s1678-86212025000100800 · Cited by 2
Moghaddas, S. A., Meng, W., & Bao, Y. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2025.111965 · Cited by 2
Self-citationCavitation erosion behavior of high-performance fiber-reinforced cementitious composites
Li, L., Li, B., Mo, S., Nong, Q., Wang, Z., & Zhang, Z. (2025) · Wear · doi:10.1016/j.wear.2025.206282 · Cited by 1
A review of nacre-inspired calcium silicate hydrates-based composites
Wang, Y., Guo, P., Paren, B., Bao, Y., & Meng, W. (2026) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2026.106677 · Cited by 1
Self-citationPrasanna, M. S. I., Madhavi, T. C., & Gundlapalli, P. (2026) · Structural Concrete · doi:10.1002/suco.70721 · Cited by 1
“The primal form of the SVR regression function can be expressed as: To solve this optimization problem efficiently, SVR is formulated in its Lagrangian dual form, 55,56 which is computationally more tractable.”
Manik, K. H., Habib, M. A., Rahman, H., Ahmed, M. R., Islam, M. M., Hasan, S. M. M., Hossain, M. B., Mim, J. J., & Hossain, N. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.102937 · Cited by 1
SHAP-Based Explainable Machine Learning Framework for Interpreting SHCC Mix Design Parameters
Al-Hammadi, M. A., Al‐Huda, Z., Algburi, R. N. A., & Al–antari, M. A. (2025) · International Conference on Emerging Smart Technologies and Applications (eSmarTA) · doi:10.1109/esmarta66764.2025.11131699 · Cited by 1
Jianmin, G., Zhongling, W., Shouyao, Y., Xu, Y., Huang, T., Yong, Y., & Hu, H. (2026) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2026.e06088 · Cited by 1
Intelligent Prediction of Mechanical Properties of Fiber-Reinforced Soils: A Comprehensive Review
Bouaricha, L., Khatti, J., & Baghdir, B. (2026) · Emerging trends in mechatronics · doi:10.1007/978-981-95-8696-7_6 · Cited by 1
Manibalan, P., Madhavi, T. C., & Prasanna, M. S. I. (2026) · Innovative Infrastructure Solutions · doi:10.1007/s41062-026-02757-0 · Cited by 1
Xing, J., Tan, X. H., Guo, M., Guo, P., Wang, Y., & Jin, D. (2026) · Materials · doi:10.3390/ma19163408 · Cited by 1
“In recent years, data-driven methods have been increasingly applied to predicting the properties of concrete materials, including compressive strength, tensile strength, elastic modulus, durability-related indicators, and other engineering performance parameters [23–25].”
Self-citationEffect of Mineral Admixtures in Engineered Cementitious Composites Using Machine Learning ApproachPreprint
Shanmugasundaram, N., Praveenkumar, S., Gayathiri, K., & Divya, S. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4054584
Machine Learning Algorithms to Estimate Composite Mechanical Properties
Gomide, J., Vignoli, L., & Macedo, Y. P. A. (2023) · doi:10.5753/eniac.2023.234255
“[Guo et al. 2021] utilizaram 10 propriedades de mistura do material, juntamente de 4 propriedades f´ısicas de comp´ositos ciment´ıcios reforc¸ados com fibra de alto desempenho.”
BackgroundInvestigation of Interfacial Property with Imperfection: A Machine Learning Approach
Ferdousi, S. (2023) · University of North Texas Digital Library (University of North Texas) · doi:10.12794/metadc2179306
Joseph, J., & Namilae, S. (2024) · AIAA SciTech Forum · doi:10.2514/6.2024-0039
de Souza, A. F., Júnior, P. F., Mello, C. H. P., Verri, F. A. N., & Balestrassi, P. P. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4866077
Metadata
- Authors
- Guo, P., Meng, W., Xu, M., Li, V. C., & Bao, Y.
- Affiliations
- Stevens Institute of Technology (US)
- Hebei University of Technology (CN)
- University of Michigan (US)
- Corresponding author
- Bao, Yi
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2021-06-08
- Volume
- 14
- Issue
- 12
- Pages
- 3143
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC8227936
- OpenAlex
- W3168590676
- Cited by
- 114
- References
- 75
- Citations by year
- 2026: 20 · 2025: 27 · 2024: 24 · 2023: 21 · 2022: 18 · 2021: 4
- FWCI
- 8.66
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Science Foundation (2046407)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
- Physical Sciences › Materials Science › Materials Chemistry › Machine Learning in Materials Science
- Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
- Keywords
- HPFRCC, mechanical property prediction, micromechanics, ductility, compressive strength, tensile strength, artificial neural networks, support vector regression, XGBoost, classification and regression trees, principal component analysis, data cleaning
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.