CoChat

Predicting Mechanical Properties of High-Performance Fiber-Reinforced Cementitious Composites by Integrating Micromechanics and Machine Learning

Open access

The DOI matches its Crossref record; 74 of the 75 references it cites were found in a registry or an index.

Abstract

Current development of high-performance fiber-reinforced cementitious composites (HPFRCC) mainly relies on intensive experiments. The main purpose of this study is to develop a machine learning method for effective and efficient discovery and development of HPFRCC. Specifically, this research develops machine learning models to predict the mechanical properties of HPFRCC through innovative incorporation of micromechanics, aiming to increase the prediction accuracy and generalization performance by enriching and improving the datasets through data cleaning, principal component analysis (PCA), and K-fold cross-validation. This study considers a total of 14 different mix design variables and predicts the ductility of HPFRCC for the first time, in addition to the compressive and tensile strengths. Different types of machine learning methods are investigated and compared, including artificial neural network (ANN), support vector regression (SVR), classification and regression tree (CART), and extreme gradient boosting tree (XGBoost). The results show that the developed machine learning models can reasonably predict the concerned mechanical properties and can be applied to perform parametric studies for the effects of different mix design variables on the mechanical properties. This study is expected to greatly promote efficient discovery and development of HPFRCC.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ma14123143

Cites

74 of 74 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Machine learning models: (a) ANN; (b) SVR; (c) CART; and (d) XGBoost. w/c is the water-to-cement ratio; s/c is the sand-to-cement ratio; Vf is the fiber content; fc is the compressive strength; ft is the tensile strength; and εcu is the tensile strain capacity (i.e., ductility).
Figure 1 Machine learning models: (a) ANN; (b) SVR; (c) CART; and (d) XGBoost. w/c is the water-to-cement ratio; s/c is the sand-to-cement ratio; Vf is the fiber content; fc is the compressive strength; ft is the tensile strength; and εcu is the tensile strain capacity (i.e., ductility).CC BY · PubMed Central
Figure 2 Flowchart of the proposed method for the selection and improvement of the variables.
Figure 2 Flowchart of the proposed method for the selection and improvement of the variables.CC BY · PubMed Central
Figure 3 Illustration of the stress-crack opening curve for HPFRCC. The orange area represents the complementary energy (Jb’), and the blue area represents the crack tip toughness (Jtip).
Figure 3 Illustration of the stress-crack opening curve for HPFRCC. The orange area represents the complementary energy (Jb’), and the blue area represents the crack tip toughness (Jtip).CC BY · PubMed Central
Figure 4 K-fold cross-validation in the training. E1 to E10 are the loss functions during the training process, and E is the cross-validation loss. The grid search method is used to find the optimum E.
Figure 4 K-fold cross-validation in the training. E1 to E10 are the loss functions during the training process, and E is the cross-validation loss. The grid search method is used to find the optimum E.CC BY · PubMed Central
Figure 5 Illustration of the innovation of methodology for prediction of the mechanical properties of HPFRCC by integrating data-driven and model-based methods.
Figure 5 Illustration of the innovation of methodology for prediction of the mechanical properties of HPFRCC by integrating data-driven and model-based methods.CC BY · PubMed Central
Figure 6 Multicollinearity analysis results. The correlation matrices for the compressive strength (a), tensile strength (b), and tensile strain capacity (c). Variance ratio and variance for the compressive strength (d), tensile strength (e), and tensile strain capacity (f). The correlation matrix for each pair of variables after PCA is shown in (g).
Figure 6 Multicollinearity analysis results. The correlation matrices for the compressive strength (a), tensile strength (b), and tensile strain capacity (c). Variance ratio and variance for the compressive strength (d), tensile strength (e), and tensile strain capacity (f). The correlation matrix for each pair of variables after PCA is shown in (g).CC BY · PubMed Central
Figure 7 Learning curve for the training process (tensile strength) using: (a) ANN, (b) SVR, (c) CART, and (d) XGBoost.
Figure 7 Learning curve for the training process (tensile strength) using: (a) ANN, (b) SVR, (c) CART, and (d) XGBoost.CC BY · PubMed Central
Figure 8 Results of the correlation matrices for input variables: (a) before PCA dimensionality reduction, and (b) after PCA dimensionality reduction.
Figure 8 Results of the correlation matrices for input variables: (a) before PCA dimensionality reduction, and (b) after PCA dimensionality reduction.CC BY · PubMed Central
Figure 9 Comparison of the prediction against the test results: (a) compressive strength [77]; (b) tensile strength [22]; and (c) tensile strain capacity [63].
Figure 9 Comparison of the prediction against the test results: (a) compressive strength [77]; (b) tensile strength [22]; and (c) tensile strain capacity [63].CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 2

  1. 45. Lewis, R.J. An introduction to classification and regression tree (CART) analysis. In Proceedings of the Annual Meeting of the Society for Academic Emergency Medicine in San Francisco, San Francisco, CA, USA, 22-25 May 2000. Available online: http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.95.4103 (accessed on 1 March 2021).
  2. 70. Tabachnick, B.G.; Fidell, L.S.; Ullman, J.B. Using Multivariate Statistics ; Pearson: Boston, MA, USA, 2007; Volume 5. Available online: https://www.pearsonhighered.com/assets/preface/0/1/3/4/0134790545.pdf (accessed on 1 March 2021).

Cited by

See all 116

Metadata

Authors
Guo, P., Meng, W., Xu, M., Li, V. C., & Bao, Y.
Affiliations
  • Stevens Institute of Technology (US)
  • Hebei University of Technology (CN)
  • University of Michigan (US)
Corresponding author
Bao, Yi
Venue
Materials
Publisher
MDPI AG
Published
2021-06-08
Volume
14
Issue
12
Pages
3143
ISSN
1996-1944 (ISSN-L)
OpenAlex
W3168590676
Cited by
114
References
75
Citations by year
2026: 20 · 2025: 27 · 2024: 24 · 2023: 21 · 2022: 18 · 2021: 4
FWCI
8.66
Type
journal article
Language
en
Open access
Locations
  • Materials (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
National Science Foundation (2046407)
Topics
  • Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
  • Physical Sciences › Materials Science › Materials Chemistry › Machine Learning in Materials Science
  • Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
Keywords
HPFRCC, mechanical property prediction, micromechanics, ductility, compressive strength, tensile strength, artificial neural networks, support vector regression, XGBoost, classification and regression trees, principal component analysis, data cleaning

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.