The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Thermal Conductivity of Aluminum Alloys—A Review
Open accessAbstract
Aluminum alloys have been extensively used as heatproof and heat-dissipation components in automotive and communication industries, and the demand for aluminum alloys with higher thermal conductivity is increasing. Therefore, this review focuses on the thermal conductivity of aluminum alloys. First, we formulate the theory of thermal conduction of metals and effective medium theory, and then analyze the effect of alloying elements, secondary phases, and temperature on the thermal conductivity of aluminum alloys. Alloying elements are the most crucial factor, whose species, existing states, and mutual interactions significantly affect the thermal conductivity of aluminum. Alloying elements in a solid solution weaken the thermal conductivity of aluminum more dramatically than those in the precipitated state. The characteristics and morphology of secondary phases also affect thermal conductivity. Temperature also affects thermal conductivity by influencing the thermal conduction of electrons and phonons in aluminum alloys. Furthermore, recent studies on the effects of casting, heat treatment, and AM processes on the thermal conductivity of aluminum alloys are summarized, in which processes mainly affect thermal conductivity by varying existing states of alloying elements and the morphology of secondary phases. These analyses and summaries will further promote the industrial design and development of aluminum alloys with high thermal conductivity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Thermal Conductivity of Heterogeneous Two-Component Systems
Hamilton, R. L., & Crosser, O. K. (1962) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160003a005 · Cited by 3,672 · cited 1×
“Hamilton [51] introduced an empirical shape factor into the Maxwell– Eucken model to investigate the effect of discontinuous phase morphology on the thermal conductivity of composites, as shown in Equation (11).”
MethodA Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Materials
Hashin, Z., & Shtrikman, S. (1962) · Journal of Applied Physics · doi:10.1063/1.1728579 · Cited by 3,267
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Thermal Conductivity of Silicon and Germanium from 3°K to the Melting Point
Glassbrenner, C. J., & Slack, G. A. (1964) · Physical Review · doi:10.1103/physrev.134.a1058 · Cited by 1,652
Ziman, J. M. (2001) · Oxford University Press eBooks · doi:10.1093/acprof:oso/9780198507796.001.0001 · Cited by 1,179
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Thermal Conductivity of the Elements
Ho, C. Y., Powell, R. W., & Liley, P. E. (1972) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.3253100 · Cited by 908
Recent development in aluminium for automotive applications
HIRSCH, J. (2014) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(14)63305-7 · Cited by 833
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Thermal Conductivity of Pure and Impure Silicon, Silicon Carbide, and Diamond
Slack, G. A. (1964) · Journal of Applied Physics · doi:10.1063/1.1713251 · Cited by 695
A new approach to modelling the effective thermal conductivity of heterogeneous materials
Wang, J., Carson, J. K., North, M. F., & Cleland, D. J. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.02.007 · Cited by 690
Thermal Conductivity of Silicon from 300 to 1400°K
Shanks, H. R., Maycock, P. D., Sidles, P. H., & Danielson, G. C. (1963) · Physical Review · doi:10.1103/physrev.130.1743 · Cited by 563
Mondolfo, L. F. (1976) · Aluminum Alloys · doi:10.1016/b978-0-408-70932-3.50008-5 · Cited by 469
Assessment of the Self Consistent Scheme Approximation: Conductivity of Particulate Composites
Hashin, Z. (1968) · Journal of Composite Materials · doi:10.1177/002199836800200302 · Cited by 356
On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
Aboulkhair, N. T., Tuck, C., Ashcroft, I., Maskery, I., & Everitt, N. M. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2980-7 · Cited by 286
Effective thermal conductivity of polymer composites: Theoretical models and simulation models
Zhai, S., Zhang, P., Xian, Y., Zeng, J., & Shi, B. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.09.067 · Cited by 240
Thermal Conductivity, Electrical Resistivity, and Seebeck Coefficient of Silicon from 100 to 1300°K
Fulkerson, W., Moore, J. P., Williams, R. K., Graves, R. S., & McElroy, D. L. (1968) · Physical Review · doi:10.1103/physrev.167.765 · Cited by 239
Samuel, A. M., Gauthier, J., & Samuel, F. H. (1996) · Metallurgical and Materials Transactions A · doi:10.1007/bf02651928 · Cited by 167
Han, Y., Li, K., Wang, J., Shu, D., & Sun, B. (2005) · Materials Science and Engineering A · doi:10.1016/j.msea.2005.06.024 · Cited by 140
Artificial ageing of Al–Si–Cu–Mg casting alloys
Sjölander, E., & Seifeddine, S. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.06.036 · Cited by 130
A reconstruction of Maxwell model for effective thermal conductivity of composite materials
Xu, J., Gao, B. Z., & Kang, F. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.03.155 · Cited by 122
Thermal and electrical conductivity in Al–Si/Cu/Fe/Mg binary and ternary Al alloys
Chen, J.-K., Hung, H.-Y., Wang, C. F., & Tang, N.-K. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9115-9 · Cited by 117
Improved mechanical properties in cast Al–Si alloys by combined alloying of Fe and Cu
Wang, E. R., Hui, X., Wang, S. S., Zhao, Y., & Chen, G. L. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.08.058 · Cited by 107
Factors influencing thermal conductivity and mechanical properties in 319 Al alloy cylinder heads
Vandersluis, E., Lombardi, A., Ravindran, C., Bois‐Brochu, A., Chiesa, F., & Mackay, R. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.09.091 · Cited by 101
A Microstructure For Measurement Of Thermal Conductivity Of Polysilicon Thin Films
Völklein, F., & Balles, H. (1992) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.1992.752511 · Cited by 98
Chen, J.-K., Hung, H.-Y., Wang, C. F., & Tang, N.-K. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.09.090 · Cited by 96
Choi, S.-W., Kim, Y. C., Lee, K. M., Cho, H., Hong, S. K., Kim, Y. C., Kang, C. S., & Kumai, S. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.08.033 · Cited by 95
Thermal Conductivity of Intermetallic Compounds with Metallic Bonding
Terada, Y., Ohkubo, K., Mohri, T., et al. (2002) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.43.3167 · Cited by 92
Adamane, A. R., Arnberg, L., Fiorese, E., Timelli, G., & Bonollo, F. (2015) · International Journal of Metalcasting · doi:10.1007/bf03355601 · Cited by 91
The effect of Mg on the structure and properties of Type 319 aluminum casting alloys
Hwang, J. Y., Banerjee, R., Doty, H. W., & Kaufman, M. J. (2008) · Acta Materialia · doi:10.1016/j.actamat.2008.11.021 · Cited by 86
Butler, C., Babu, S., Lundy, R., Meehan, R. O., Punch, J. M., & Jeffers, N. M. R. (2021) · Materials Characterization · doi:10.1016/j.matchar.2021.110945 · Cited by 82
A review on advances in 3D metal printing
Gadagi, B., & Lekurwale, R. R. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.10.436 · Cited by 79
Thermal conductivity of cast iron: Models and analysis of experiments
Helsing, J., & Grimvall, G. (1991) · Journal of Applied Physics · doi:10.1063/1.349573 · Cited by 73
Thermal conductivity of Al–Cu–Mg–Si alloys: Experimental measurement and CALPHAD modeling
Zhang, C., Du, Y., Liu, S., Liu, Y., & Sundman, B. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.04.019 · Cited by 72
Effect of alloying elements on thermal conductivity of aluminum
Zhang, A., & Li, Y. (2023) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-023-00942-w · Cited by 65
Self-citationChoi, S. W., Cho, H. S., & Kumai, S. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.07.137 · Cited by 64
Effects of Cu and Zn on microstructures and mechanical behavior of the medium-entropy aluminum alloy
Zhang, B., Liaw, P. K., Brechtl, J. M., Ren, J., Guo, X., & Zhang, Y. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153092 · Cited by 63
Engineering Lightweight Aluminum and Magnesium Alloys for a Sustainable Future
Emadi, P., Andilab, B., & Ravindran, C. (2022) · Journal of the Indian Institute of Science · doi:10.1007/s41745-021-00267-9 · Cited by 53
Ganapathy, D., Singh, K., Phelan, P. E., & Prasher, R. (2005) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.1915387 · Cited by 49
Effect of Annealing and Metallurgical Treatments on Thermal Conductivity of Aluminium Alloys
Rauta, V., Cingi, C., & Orkas, J. (2016) · International Journal of Metalcasting · doi:10.1007/s40962-015-0017-z · Cited by 43
Wen, C., Gan, J., Li, C., Huang, Y., & Du, J. (2020) · International Journal of Metalcasting · doi:10.1007/s40962-020-00436-z · Cited by 41
Heat conduction in silicon thin films: Effect of microstructure
Wei, L., Vaudin, M. D., Hwang, C. S., White, G. S., Xu, J. Z., & Steckl, A. J. (1995) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1995.1889 · Cited by 40
Vandersluis, E., & Ravindran, C. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-3109-3 · Cited by 36
Zhang, X., Zhou, Y., Zhong, G., et al. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07045-7 · Cited by 33
Kim, M.-S. (2021) · Materials · doi:10.3390/ma14092410 · Cited by 29
Gan, J., Du, J., Wen, C., et al. (2021) · International Journal of Metalcasting · doi:10.1007/s40962-021-00580-0 · Cited by 28
Zhou, Y., Zhang, X., Zhong, G., et al. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.164446 · Cited by 24
Luo, G., Huang, Y., Li, C., Huang, Z., & Du, J. (2020) · Materials · doi:10.3390/ma13173728 · Cited by 22
Kim, C.-W., Kim, Y., Kim, J., et al. (2018) · 대한금속재료학회지 · doi:10.3365/kjmm.2018.56.11.805 · Cited by 17
Wang, G., & Li, Y. (2020) · China Foundry · doi:10.1007/s41230-020-0029-z · Cited by 8
Self-citation
Metadata
- Authors
- Zhang, A., & Li, Y.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2023-04-08
- Volume
- 16
- Issue
- 8
- Pages
- 2972
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W4363648076
- Cited by
- 291
- References
- 51
- FWCI
- 35.73
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.