Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.

Manganese-Titanium Mixed Ion Sieves for the Selective Adsorption of Lithium Ions from an Artificial Salt Lake Brine

Open access
Ding, Yaxuan, Nhung, Nguyen Thi Hong, An, Jiahao, Chen, Hao, Liao, Lianying, He, Chunlin, Wang, Xinpeng, Fujita, Toyohisa · 2023 · Materials

Abstract

Lithium recovery is imperative to accommodate the increase in lithium demand. Salt lake brine contains a large amount of lithium and is one of the most important sources of lithium metal. In this study, Li2CO3, MnO2, and TiO2 particles were mixed, and the precursor of a manganese–titanium mixed ion sieve (M-T-LIS) was prepared by a high-temperature solid-phase method. M-T-LISs were obtained by DL-malic acid pickling. The adsorption experiment results noted single-layer chemical adsorption and maximum lithium adsorption of 32.32 mg/g. From the Brunauer–Emmett–Teller and scanning electron microscopy results, the M-T-LIS provided adsorption sites after DL-malic acid pickling. In addition, X-ray photoelectron spectroscopy and Fourier transform infrared results showed the ion exchange mechanism of the M-T-LIS adsorption. From the results of the Li+ desorption experiment and recoverability experiment, DL-malic acid was used to desorb Li+ from the M-T-LIS with a desorption rate of more than 90%. During the fifth cycle, the Li+ adsorption capacity of the M-T-LIS was more than 20 mg/g (25.90 mg/g), and the recovery efficiency was higher than 80% (81.42%). According to the selectivity experiment, the M-T-LIS had good selectivity for Li+ (adsorption capacity of 25.85 mg/g in the artificial salt lake brine), which indicates its good application potential.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ma16114190

Cites

59 of 59 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 (a–c) XRD spectra of TiO2, MnO2, and Li2CO3, respectively. (d–f) Particle size distribution of TiO2, MnO2, and Li2CO3, respectively.
Figure 1 (a–c) XRD spectra of TiO2, MnO2, and Li2CO3, respectively. (d–f) Particle size distribution of TiO2, MnO2, and Li2CO3, respectively.CC BY · PubMed Central
Figure 2 (a) TGA results of the M-T-LIS precursor at 302–1268 K. (b) XRD analysis of the M-T-LIS.
Figure 2 (a) TGA results of the M-T-LIS precursor at 302–1268 K. (b) XRD analysis of the M-T-LIS.CC BY · PubMed Central
Figure 3 SEM images of (a) the M-T-LIS precursor and (b) the M-T-LIS after DL-malic acid pickling.
Figure 3 SEM images of (a) the M-T-LIS precursor and (b) the M-T-LIS after DL-malic acid pickling.CC BY · PubMed Central
Figure 4 N2 adsorption–desorption isotherm and pore size distribution of the (a) M-T-LIS precursor and (b) M-T-LIS.
Figure 4 N2 adsorption–desorption isotherm and pore size distribution of the (a) M-T-LIS precursor and (b) M-T-LIS.CC BY · PubMed Central
Figure 5 Influence of the (a) initial pH of M-T-LIS pickling by citric acid, tartaric acid, and DL-malic acid (CLi+: 100 mg/L, temperature: 303 K, time: 600 min), (b) zeta potential at different pH, (c) time (CLi+: 100 mg/L, temperature: 303 K, pH: 12), and (d) temperature (CLi+: 100 mg/L, time: 600 min, pH: 12) on the adsorption capacity of the M-T-LIS.
Figure 5 Influence of the (a) initial pH of M-T-LIS pickling by citric acid, tartaric acid, and DL-malic acid (CLi+: 100 mg/L, temperature: 303 K, time: 600 min), (b) zeta potential at different pH, (c) time (CLi+: 100 mg/L, temperature: 303 K, pH: 12), and (d) temperature (CLi+: 100 mg/L, time: 600 min, pH: 12) on the adsorption capacity of the M-T-LIS.CC BY · PubMed Central
Figure 6 (a) Adsorption isotherm of the M-T-LIS. (b) Pseudo-first-order kinetic model of the M-T-LIS. (c) Pseudo-second-order kinetic model of the M-T-LIS.
Figure 6 (a) Adsorption isotherm of the M-T-LIS. (b) Pseudo-first-order kinetic model of the M-T-LIS. (c) Pseudo-second-order kinetic model of the M-T-LIS.CC BY · PubMed Central
Figure 7 (a) Effect of concentration on the desorption percentage and capacity (desorption solution concentration: 0.00–0.30 mol/L, desorption time: 720 min). (b) Effect of time (desorption time: 120–720 min, desorption solution concentration: 0.10 mol/L) on the desorption percentage and capacity.
Figure 7 (a) Effect of concentration on the desorption percentage and capacity (desorption solution concentration: 0.00–0.30 mol/L, desorption time: 720 min). (b) Effect of time (desorption time: 120–720 min, desorption solution concentration: 0.10 mol/L) on the desorption percentage and capacity.CC BY · PubMed Central
Figure 8 Li+ adsorption selectivity from the artificial salt lake brine on the M-T-LIS (pH: 12, T: 318 K, t: 600 min).
Figure 8 Li+ adsorption selectivity from the artificial salt lake brine on the M-T-LIS (pH: 12, T: 318 K, t: 600 min).CC BY · PubMed Central
Figure 9 XPS characterization of the M-T-LIS before and after pickling and adsorption. (a) XPS survey spectra (inset is the partial enlargement) and high-resolution XPS spectra of (b) Ti2p, (c) Mn2p, and (d) Li1s. (e) FT-IR spectra for the M-T-LIS before and after pickling, and after adsorption.
Figure 9 XPS characterization of the M-T-LIS before and after pickling and adsorption. (a) XPS survey spectra (inset is the partial enlargement) and high-resolution XPS spectra of (b) Ti2p, (c) Mn2p, and (d) Li1s. (e) FT-IR spectra for the M-T-LIS before and after pickling, and after adsorption.CC BY · PubMed Central
Figure 10 Recyclability of the M-T-LIS for Li+ adsorption (adsorption conditions: CLi+: 100 mg/L, pH: 12, temperature: 318 K, time: 600 min; desorption conditions: desorption solution concentration: 0.10 mol/L, time: 240 min).
Figure 10 Recyclability of the M-T-LIS for Li+ adsorption (adsorption conditions: CLi+: 100 mg/L, pH: 12, temperature: 318 K, time: 600 min; desorption conditions: desorption solution concentration: 0.10 mol/L, time: 240 min).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 59 references

Cited by

See all 49

Metadata

Authors
Ding, Y., Nhung, N. T. H., An, J., Chen, H., Liao, L., He, C., Wang, X., & Fujita, T.
Affiliations
  • Guangxi University (CN)
  • School of Resources, Environment and Materials, Guangxi University, Nanning 530004, China
Corresponding author
Fujita, Toyohisa
Venue
Materials
Publisher
MDPI AG
Published
2023-06-05
Volume
16
Issue
11
Pages
4190
ISSN
1996-1944 (ISSN-L)
OpenAlex
W4379468830
Cited by
38
References
59
Citations by year
2026: 16 · 2025: 11 · 2024: 10 · 2023: 1
FWCI
3.73
Type
journal article
Language
en
Open access
Locations
  • Materials (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Funders
Natural Science Foundation of China (NSFC 21976039)
Topics
  • Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
  • Physical Sciences › Environmental Science › Waste Management and Disposal › Chemical Synthesis and Characterization
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
Keywords
lithium recovery, salt lake brine, selective adsorption, lithium ion exchange, adsorbent regeneration, lithium desorption

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Manganese-Titanium Mixed Ion Sieves for the Selective Adsorption of Lithium Ions from an Artificial Salt Lake Brine. https://app.cochat.ai/papers/10.3390/ma16114190
The paper
Ding, Y., Nhung, N. T. H., An, J., Chen, H., Liao, L., He, C., Wang, X., & Fujita, T. (2023). Manganese-Titanium Mixed Ion Sieves for the Selective Adsorption of Lithium Ions from an Artificial Salt Lake Brine. Materials. https://doi.org/10.3390/ma16114190

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.