The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index; 10 of the 14 sources its claims cite were checked for support.
Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks
Open accessAbstract
Automatic detection of steel surface defects is very important for product quality control in the steel industry. However, the traditional method cannot be well applied in the production line, because of its low accuracy and slow running speed. The current, popular algorithm (based on deep learning) also has the problem of low accuracy, and there is still a lot of room for improvement. This paper proposes a method combining improved ResNet50 and enhanced faster region convolutional neural networks (faster R-CNN) to reduce the average running time and improve the accuracy. Firstly, the image input into the improved ResNet50 model, which add the deformable revolution network (DCN) and improved cutout to classify the sample with defects and without defects. If the probability of having a defect is less than 0.3, the algorithm directly outputs the sample without defects. Otherwise, the samples are further input into the improved faster R-CNN, which adds spatial pyramid pooling (SPP), enhanced feature pyramid networks (FPN), and matrix NMS. The final output is the location and classification of the defect in the sample or without defect in the sample. By analyzing the data set obtained in the real factory environment, the accuracy of this method can reach 98.2%. At the same time, the average running time is faster than other models.
Overview
CoChat Summary
TL;DR
The paper proposes a two-stage pipeline combining an improved ResNet50 classifier with an enhanced Faster R-CNN detector for steel surface defects, using a 0.3 defect-probability threshold to skip detection on likely defect-free samples. On the Severstal Kaggle dataset, the combined model reaches 0.982 accuracy with 63.3 ms average running time.
Key findings
- The combined classification + object detection model achieves 0.982 accuracy and 63.3 ms average running time, compared with 0.9752 accuracy / 2.9 ms for the improved ResNet50 alone, 0.972 accuracy / 214.5 ms for improved Faster R-CNN alone, and 0.97 accuracy / 209.4 ms for Wei et al.
- The classification model ResNet_vd_dcnV2_ImprovedCutout reaches 0.9752 accuracy with test time augmentation (TTA), with TTA increasing accuracy by about 0.05%; its running time is 2.9 ms.
- The final object detection model reaches mAP 0.876, with AP values of 0.845 for pitted surface, 0.829 for crazing, 0.913 for scratches, and 0.916 for patches; YOLOv3 scores mAP 0.704 and Faster-RCNN 0.827.
- In the combined pipeline, 7224 samples are predicted defect-free with accuracy 0.991 (7159 correct, 65 wrong); the remaining 2830 samples are processed by detection with accuracy 0.961, yielding final whole-model accuracy 0.982.
Methods
- Dataset: Kaggle “Severstal: Steel Defect Detection,” 12,568 grayscale images of size 1600 × 256, split into four 400 × 256 images, giving 50,272 samples: 37,080 without defects, 12,876 with one defect type, and 316 with two defect types; defect classes include pitted surface, crazing, scratches/scrapes, and patches; data split 80% training / 20% validation.
- Pipeline: images are resized to 224 × 224 and classified by improved ResNet50 with deformable convolution network (DCN) and improved cutout; if defect probability is less than 0.3, the sample is output as defect-free; otherwise it is resized to 800 × 1344 and passed to improved Faster R-CNN with spatial pyramid pooling (SPP), enhanced feature pyramid networks (FPN), matrix NMS, CoordConv, and modified anchors.
- Training: transfer learning from ImageNet; classification model trained for 80 epochs with learning rate 0.01 and Momentum 0.9; object detection model trained for 50 epochs with learning rate 0.0025, batch_size 4, and warmup 2500; data augmentation and weighted cross entropy / focal loss are used to address class imbalance.
Limitations
- The paper states dataset annotation problems: some pitted surface defects are not marked, some areas marked with defects have problems, and some images with defects are placed in the no-defect samples; future work will further improve the dataset and study model compression and acceleration.
- The paper states pitted surface defects are usually small and not obvious, so accuracy for this class is not high; cracking defects are narrow and long, also limiting accuracy; the final detection accuracy is lower than using the detection model on all samples because the remaining no-defect samples are more difficult to detect.
- Evident from the text: evaluation uses a single public Kaggle dataset rather than a production-line dataset, so generalization to real factory conditions is not demonstrated; class imbalance also remains substantial, with crazing defects accounting for only 1.6% of defect samples before augmentation to 800.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
8 Valid · 4 Not valid · 2 Not checked · 50 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“To improve the accuracy of small defect detection, this paper uses SPP and FPN to increase the effect of multi-scale feature extraction.”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 3. Steel Defect Dataset
What the sources say
- Not matchedcites [21][22][23][24][25]
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
- Partly supportedcites [26] Lin, T., Dollár, P., Girshick, R., He, K., Hariharan, B., and Belongie, S. (2017, January 21–26). Feature Pyramid Networks for Object Detection. Proceedings of the 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR 2017), Honolulu, HI, USA. sourceExperimental — accuracy not yet measured
The Abstract (p. 1) describes FPN as a multi-scale feature extractor, and the ablation experiments (p. 5) report improved detection of small objects relative to a single-scale baseline. The paper does not establish that SPP improves multi-scale feature extraction; Related Work (p. 3) instead describes SPPnet as efficiently using features extracted at a single image scale. (LLM, conf=0.85)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Firstly, we propose an improved faster R-CNN model, which can detect multi-scale defects better by adding spatial pyramid pooling (SPP) [21][22][23][24][25], and enhanced feature pyramid networks (FPN) [26] modules.”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 1. Introduction
What the sources say
- Not matchedcites [21][22][23][24][25]
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
- Supportedcites [26] Lin, T., Dollár, P., Girshick, R., He, K., Hariharan, B., and Belongie, S. (2017, January 21–26). Feature Pyramid Networks for Object Detection. Proceedings of the 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR 2017), Honolulu, HI, USA. source
The citation [26] is attached to the FPN module, not to the separately cited SPP module. The Introduction (p. 2) identifies the paper's method as a Feature Pyramid Network and reports improved object detection with Faster R-CNN. The citing authors' claim about their own enhanced model detecting defects is not attributed to this source. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“By counting the aspect ratio of various defects, we find a large aspect ratio for cracking and scratches defects, as shown in Figure 11a.”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 3. Steel Defect Dataset
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Figure 14 shows the change of accuracy during training.The maximum value is about 0.974.”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 4. Training
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The paper states this without a source or data behind it here, so there is nothing to check it against. The quote shows it is in the paper.
In the paper
“At the same time, the average running time is faster than other models.”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: unclear — It is unclear why the paper says it holds.
36 more claims
Create a free account to see all 64 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 2
- The quote only partly states this claim. 3
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Such methods are usually sensitive to defect size and noise, and are generally not end-to-end models that cannot meet the needs of automatic defect recognition [36].”
From Steel Surface Defect Recognition: A Survey (2022) · cites this paper as [36]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 6. Conclusions
“| Konovalenko et al. [38] | - | 0.9691 | - | - | - | - | - | | - | |”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > References
“44. Konovalenko, I.; Maruschak, P.; Brezinová, J.; Vi ňáš, J.; Brezina, J. Steel Surface Defect Classification Using Deep Residual Neural Network.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 6. Conclusions
“| Wei et al. [8] | 0.97 | 209.4 ms |”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > References
“13. Wei, R.; Song, Y.; Zhang, Y. Enhanced Faster Region Convolutional Neural Networks for Steel Surface Defect Detection.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 6. Conclusions
“| Fadli et al. [37] | - | 0.94 | - | - | - | - | - | | - | |”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > References
“43. Fadli, V.F.; Herlistiono, I.O. Steel Surface Defect Detection using Deep Learning.”
Citations
Cites
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.90 · Cited by 235,474
Very Deep Convolutional Networks for Large-Scale Image Recognition
Simonyan, K., & Zisserman, A. (2014) · arXiv · doi:10.48550/arxiv.1409.1556 · Cited by 114,148
Faster R-CNN: Towards Real-Time Object Detection with Region Proposal Networks
Ren, S., He, K., Girshick, R., & Sun, J. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2577031 · Cited by 73,472
Feature Pyramid Networks for Object Detection
Lin, T.-Y., Dollar, P., Girshick, R., He, K., Hariharan, B., & Belongie, S. (2017) · 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2017.106 · Cited by 30,939
A survey on Image Data Augmentation for Deep Learning
Shorten, C., & Khoshgoftaar, T. M. (2019) · Journal of Big Data · doi:10.1186/s40537-019-0197-0 · Cited by 13,203
Spatial Pyramid Pooling in Deep Convolutional Networks for Visual Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2015) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2015.2389824 · Cited by 11,971
Focal Loss for Dense Object Detection
Lin, T.-Y., Goyal, P., Girshick, R., He, K., & Dollar, P. (2020) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2018.2858826 · Cited by 9,556
(2007) · doi:10.5555/1283383.1283494 · Cited by 7,364
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2015) · arXiv · doi:10.48550/arxiv.1512.03385 · Cited by 4,196
Spatial Pyramid Pooling in Deep Convolutional Networks for Visual Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2014) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-10578-9_23 · Cited by 3,034
Cited by
Steel Surface Defect Recognition: A Survey
Wen, X., Shan, J., He, Y., & Song, K. (2022) · Coatings · doi:10.3390/coatings13010017 · Cited by 210
Deep Learning for Automatic Vision-Based Recognition of Industrial Surface Defects: A Survey
Prunella, M., Scardigno, R. M., Buongiorno, D., Brunetti, A., Longo, N., Carli, R., Dotoli, M., & Bevilacqua, V. (2023) · IEEE Access · doi:10.1109/access.2023.3271748 · Cited by 196
Deep convolutional neural network for weld defect classification in radiographic images
Palma-Ramírez, D., Veitía, B. D. R., Font-Ariosa, P., Hernández, A. E., Roca, Á. S., Fals, H. C., Álvarez, J. R. N., & Hernández-Herrera, H. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e30590 · Cited by 90
A Real-Time Steel Surface Defect Detection Approach With High Accuracy
Wang, W., Mi, C., Wu, Z., Lu, K., Long, H., Pan, B., Li, D., Zhang, J., Chen, P., & Wang, B. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3127648 · Cited by 77
Automated steel surface defect detection and classification using a new deep learning-based approach
Demir, K., Ay, M., Çavaş, M., & Demir, F. (2022) · Neural Computing and Applications · doi:10.1007/s00521-022-08112-5 · Cited by 80
Steel Surface Defect Detection Method Based on Improved YOLOX
Li, C., Xu, A., Zhang, Q., & Cai, Y. (2024) · IEEE Access · doi:10.1109/access.2024.3374869 · Cited by 69
A Review of Metal Surface Defect Detection Technologies in Industrial Applications
Qiao, Q., Hu, H., Ahmad, A. A., & Wang, K. (2025) · IEEE Access · doi:10.1109/access.2025.3544578 · Cited by 79
Hoffmann, R., & Reich, C. (2023) · Electronics · doi:10.3390/electronics12224572 · Cited by 80
Steel Surface Defect Detection Using an Ensemble of Deep Residual Neural Networks
Konovalenko, І. V., Maruschak, P. O., & Brevus, V. (2021) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4051435 · Cited by 59
Smith, A. D., Du, S., & Kurien, A. M. (2023) · Applied Sciences · doi:10.3390/app13158716 · Cited by 52
Attention mechanism and texture contextual information for steel plate defects detection
Zhang, C., Cui, J., Wu, J., & Zhang, X. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-023-02149-6 · Cited by 45
A Survey of Vision-Based Methods for Surface Defects’ Detection and Classification in Steel Products
Ibrahim, A. A. M. S., & Tapamo, J. (2024) · Informatics · doi:10.3390/informatics11020025 · Cited by 70
Semantic Segmentation of Metal Surface Defects and Corresponding Strategies
Zhang, Z., Wang, W., & Tian, X. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3282301 · Cited by 52
Konovalenko, І. V., Maruschak, P. O., Brevus, V., & Prentkovskis, O. (2021) · Metals · doi:10.3390/met11040549 · Cited by 40
A Multi-Branch U-Net for Steel Surface Defect Type and Severity Segmentation
Neven, R., & Goedemé, T. (2021) · Metals · doi:10.3390/met11060870 · Cited by 42
Ibrahim, A. A. M. S., & Tapamo, J. (2024) · Scientific African · doi:10.1016/j.sciaf.2024.e02066 · Cited by 50
Jeong, M., Yang, M., & Jeong, J. (2024) · Electronics · doi:10.3390/electronics13224467 · Cited by 38
An efficient detector for detecting surface defects on cold-rolled steel strips
Chen, S., Jiang, S., Wang, X., Sun, P., Hua, C., & Sun, J. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2024.109325 · Cited by 43
YOLOv7-SiamFF: Industrial defect detection algorithm based on improved YOLOv7
Yi, F., Zhang, H., Yang, J., He, L., Mohamed, A. S. A., & Gao, S. (2024) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2024.109090 · Cited by 37
RFAConv-CBM-ViT: enhanced vision transformer for metal surface defect detection
Wei, H., Zhao, L., Li, R., & Zhang, M. (2024) · The Journal of Supercomputing · doi:10.1007/s11227-024-06662-0 · Cited by 42
Wang, Z., Bao, Y., & Gu, C. (2022) · steel research international · doi:10.1002/srin.202200342 · Cited by 27
Development of an Improved YOLOv7-Based Model for Detecting Defects on Strip Steel Surfaces
Wang, R., Liang, F., Mou, X., Chen, L., Yu, X., Peng, Z., & Chen, H. (2023) · Coatings · doi:10.3390/coatings13030536 · Cited by 31
Contrastive self-supervised representation learning framework for metal surface defect detection
Zabin, M., Kabir, A. N. B., Kabir, M. K., Choi, H., & Uddin, J. (2023) · Journal Of Big Data · doi:10.1186/s40537-023-00827-z · Cited by 32
Zheng, X., Liu, W., & Huang, Y. (2024) · IEEE Access · doi:10.1109/access.2024.3349628 · Cited by 26
Hanza, S. S., Marohnić, T., Iljkić, D., et al. (2021) · Metals · doi:10.3390/met11050714 · Cited by 24
Practical Aspects of the Design and Use of the Artificial Neural Networks in Materials Engineering
Sitek, W., & Trzaska, J. (2021) · Metals · doi:10.3390/met11111832 · Cited by 24
Motyl, M., & Madej, Ł. (2022) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-022-00531-4 · Cited by 24
CFE-YOLOv8s: Improved YOLOv8s for Steel Surface Defect Detection
Yang, S., Xie, Y., Wu, J., Huang, W., Yan, H., Wang, J., Bi, W., Yu, X., Wu, Q., & Xie, F. (2024) · Electronics · doi:10.3390/electronics13142771 · Cited by 26
Encryption and Generation of Images for Privacy-Preserving Machine Learning in Smart Manufacturing
Terziyan, V. Y., Malyk, D., Golovianko, M., & Branytskyi, V. (2023) · Procedia Computer Science · doi:10.1016/j.procs.2022.12.205 · Cited by 27
Konovalenko, І. V., Maruschak, P. O., Kozbur, H., Brezinová, J., Brezina, J., & Guzanová, A. (2021) · Metals · doi:10.3390/met11111851 · Cited by 22
Surface Defect Classification of Steel Strip with Few Samples Based on Dual‐Stream Neural Network
Zhang, J., Li, S., Yan, Y., Ni, Z., & Ni, H. (2021) · steel research international · doi:10.1002/srin.202100554 · Cited by 23
Yousaf, J., Abuowda, Z., Ramadan, S., Salam, N., Almajali, E. R., Hassan, T., Gad, A., AlKhedher, M. A., & Ghazal, M. A. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2024.109506 · Cited by 24
Explainable efficient and optimized feature fusion network for surface defect detection
Sundarrajan, K., & Rajendran, B. K. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11789-0 · Cited by 19
Physics Informed Synthetic Image Generation for Deep Learning-Based Detection of Wrinkles and Folds
Manyar, O. M., Cheng, J., Levine, R., Krishnan, V., Barbič, J., & Gupta, S. K. (2022) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4056295 · Cited by 18
Impact of Image Compression on the Performance of Steel Surface Defect Classification with a CNN
Benbarrad, T., Eloutouate, L., Arioua, M., Elouaai, F., & Laanaoui, M. D. (2021) · Journal of Sensor and Actuator Networks · doi:10.3390/jsan10040073 · Cited by 22
Wavelet Texture Descriptor for Steel Surface Defect Classification
Belila, D., Khaldi, B., & Aiadi, O. (2024) · Materials · doi:10.3390/ma17235873 · Cited by 19
Quadri, T. W., Akpan, E. D., Elugoke, S. E., Olasunkanmi, L. O., Sheetal, Singh, A. K., Pani, B., Tuteja, J., Shukla, S. K., Verma, C., et al. (2025) · Applied Physics Reviews · doi:10.1063/5.0228503 · Cited by 22
Deep learning model for imbalanced multi-label surface defect classification
Liu, Y., Yuan, Y., & Liu, J. (2021) · Measurement Science and Technology · doi:10.1088/1361-6501/ac41a6 · Cited by 18
Nath, V., Chattopadhyay, C., & Desai, K. A. (2022) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2022.105553 · Cited by 18
Improved YOLOv5 Network for Steel Surface Defect Detection
Huang, B., Liu, J., Liu, X., Liu, K., Liao, X., Li, K., & Wang, J. (2023) · Metals · doi:10.3390/met13081439 · Cited by 21
Hai, C., Wu, Y., Zhang, H., Meng, F., Tan, D., & Yang, M. (2024) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-023-01033-w · Cited by 17
AEDN-YOLO: an efficient one-stage detection network for strip steel surface defects
Wei, M., Chen, B., Liu, J., Yuan, N., Liu, J., & Ji, Z. (2024) · Engineering Research Express · doi:10.1088/2631-8695/ad681d · Cited by 15
Chaurasia, N., Jha, S. K., & Sangal, S. (2023) · Materialia · doi:10.1016/j.mtla.2023.101803 · Cited by 14
Semi-supervised learning for steel surface inspection using magnetic flux leakage signal
Park, J.-E., & Kim, Y. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-023-02286-y · Cited by 15
Depth feature fusion based surface defect region identification method for steel plate manufacturing
Bai, D.-X., Li, G.-F., Jiang, D., Tao, B., Yun, J.-T., Hao, Z., Zhou, D., & Ju, Z.-J. (2024) · Computers & electrical engineering · doi:10.1016/j.compeleceng.2024.109166 · Cited by 16
Multi-scale and dynamic snake convolution-based YOLOv9 for steel surface defect detection
Chen, J., Jin, W., Liu, Y., Huang, X., & Zhang, Y. (2025) · The Journal of Supercomputing · doi:10.1007/s11227-025-07036-w · Cited by 18
Güçlü, E., Aydın, İ., & Akın, E. (2025) · Measurement · doi:10.1016/j.measurement.2025.117136 · Cited by 28
Outer surface defect detection of steel pipes with 3D vision based on multi-line structured lights
Jin, L., Li, S., Qin, G., & Xu, K. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad2da6 · Cited by 17
Manivannan, S. (2023) · Computers & Industrial Engineering · doi:10.1016/j.cie.2023.109766 · Cited by 17
Yedukondalu, J., Karaddi, S. H., Bindu, C. H., Sharma, D., Sarkar, A. K., & Sharma, L. D. (2024) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-024-09230-z · Cited by 15
Wang, J., Li, Z., Chen, Q., Ding, K., Zhu, T., & Ni, C. (2021) · Electronics · doi:10.3390/electronics10162017 · Cited by 15
Compare VGG19, ResNet50, Inception-V3 for Review Food Rating
Andrew, A., & Santoso, H. (2022) · SinkrOn · doi:10.33395/sinkron.v7i2.11383 · Cited by 12
Wang, J., Zhang, Q., & Liu, G. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac6fb2 · Cited by 12
Akhyar, F., Furqon, E. N., & Lin, C. (2022) · Sensors · doi:10.3390/s22114257 · Cited by 14
DBCW-YOLO: A Modified YOLOv5 for the Detection of Steel Surface Defects
Han, J., Cui, G., Li, Z., & Zhao, J. (2024) · Applied Sciences · doi:10.3390/app14114594 · Cited by 16
Detects Damage Car Body using YOLO Deep Learning Algorithm
Gustian, Y. W., Rahman, B., Hindarto, D., et al. (2023) · SinkrOn · doi:10.33395/sinkron.v8i2.12394 · Cited by 11
Convolutional neural networks for real-time wood plank detection and defect segmentation
Mohsin, M., Balogun, O. S., Haataja, K., & Toivanen, P. (2023) · F1000Research · doi:10.12688/f1000research.131905.1 · Cited by 11
CNN‐based defect detection in manufacturing
Hou, M., Li, P., Cheng, S., & Yv, J. (2024) · Advanced Control for Applications · doi:10.1002/adc2.196 · Cited by 15
Xu, W., Zhang, S., Bai, F., & Zhao, T. (2022) · IEEE Access · doi:10.1109/access.2022.3217238 · Cited by 9
Li, R., Hou, K., Zhu, M., Dai, Q., Ni, J., Liu, X., & Li, X. (2024) · IEEE Access · doi:10.1109/access.2024.3481031 · Cited by 10
Madhavan, S., Sridharan, N. V., Mahanta, T. K., & Sugumaran, V. (2024) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-024-09744-6 · Cited by 11
Detection of Defects on Metal Surfaces Based on Deep Learning
Han, O. C., & Kutbay, U. (2025) · Applied Sciences · doi:10.3390/app15031406 · Cited by 10
YOLOv5s‐GC‐Based Surface Defect Detection Method of Strip Steel
Li, X., Yang, R., & Zhou, H. (2024) · steel research international · doi:10.1002/srin.202300421 · Cited by 9
Few-Shot Steel Defect Detection Based on a Fine-Tuned Network with Serial Multi-Scale Attention
Liu, X., Jiao, L., Peng, Y., An, K., Wang, D., Lu, W., & Han, J. (2024) · Applied Sciences · doi:10.3390/app14135823 · Cited by 7
Deep Learning-Based Defect Inspection in Sheet Metal Stamping Parts
Singh, A. R., Bashford‐Rogers, T., Hazra, S., & Debattista, K. (2022) · The minerals, metals & materials series · doi:10.1007/978-3-031-06212-4_38 · Cited by 11
Aşar, E., & Özgür, A. (2024) · Engineering materials · doi:10.1007/978-3-031-57468-9_3 · Cited by 11
Dawood, A. S. (2024) · Iraqi Journal of Computer Communication Control and System Engineering · doi:10.33103/uot.ijccce.24.1.5 · Cited by 5
Maru, M. B., Beyene, D. A., Cha, G., et al. (2025) · Measurement · doi:10.1016/j.measurement.2025.116914 · Cited by 6
Optimal surface defect detector design based on deep learning for 3D geometry
Suh, S. (2025) · Scientific Reports · doi:10.1038/s41598-025-88112-2 · Cited by 9
Deep learning-based methods for detecting surface defects in steel plates
Patil, S., Miglani, A., Kankar, P. K., & Roy, D. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-90789-7.00001-4 · Cited by 8
Liu, X., & Aldrich, C. (2022) · Metals · doi:10.3390/met12111777 · Cited by 7
Ortegón-Sarmiento, T., Kélouwani, S., Alam, M. Z., et al. (2022) · World Electric Vehicle Journal · doi:10.3390/wevj13100191 · Cited by 6
Automated Quality Inspection Using Computer Vision: A Review
Belkhedar, G., & Lyhyaoui, A. (2023) · Lecture notes in networks and systems · doi:10.1007/978-3-031-26384-2_60 · Cited by 5
A Survey of Deep learning in Advancing Steel Industry Standards
Aghapanah, H., Rad, A. S., & Rasti, R. (2024) · CSI International Symposium on Artificial Intelligence and Signal Processing · doi:10.1109/aisp61396.2024.10475283 · Cited by 9
Defect attention-based lightweight real-time adaptable surface defect analysis
Delibaşoğlu, İ., DAŞ, D. B., & Daş, O. (2025) · Ironmaking & Steelmaking Processes Products and Applications · doi:10.1177/03019233241296959 · Cited by 7
Recognition and classification of casting defects using the CNN algorithm
Chigateri, K. B., Poojary, S., & Padmashali, S. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.03.818 · Cited by 6
Date Fruit Classification System using Deep Transfer Learning
Abuowda, Z., Ramadan, S., Salam, N., et al. (2023) · International Conference on Future Internet of Things and Cloud (FiCloud) · doi:10.1109/ficloud58648.2023.00063 · Cited by 5
Li, D., Li, Y., & Zhang, Z. (2024) · Journal of Optics · doi:10.1007/s12596-023-01592-1 · Cited by 5
Elanangai, V., & Vasanth, K. (2022) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/jifs-213031 · Cited by 5
CFC-CenterNet: A hybrid approach for steel surface defect detection
Ying, H., Song, M., Xue, Z., Xiao, S., & Yu, J. (2025) · Measurement · doi:10.1016/j.measurement.2025.118891 · Cited by 8
Rao, K. B. V. B., Prasad, G. N. R., Amudha, S., Kumar, A., Prasad, D., & Mohanavel, V. (2022) · International Conference on Inventive Research in Computing Applications (ICIRCA) · doi:10.1109/icirca54612.2022.9985717 · Cited by 6
Zhang, H., Miao, Q., Li, S., Wang, C., Chan, S., Hu, J., & Bai, C. (2024) · Multimedia Tools and Applications · doi:10.1007/s11042-024-19565-2 · Cited by 6
EIM-YOLO: A Defect Detection Method for Metal-Painted Surfaces on Electrical Sealing Covers
Wu, Z., & Yang, L. (2025) · Applied Sciences · doi:10.3390/app15179380 · Cited by 4
Detection method for improving shape perception of small object defects on metal surfaces
Zhu, X., Montagne, C., Wang, Q., Hu, L., Yu, J., Tabia, H., & Hu, Q. (2025) · Applied Intelligence · doi:10.1007/s10489-025-06873-9 · Cited by 4
Detection of Steel Surface Defects Using U-Net with Pre-trained Encoder
Ali, A. A., Chramcov, B., Jašek, R., et al. (2021) · Lecture notes in networks and systems · doi:10.1007/978-3-030-90318-3_18 · Cited by 3
Irhebhude, M. E., Kolawole, A. O., & Amos, G. N. (2023) · IntechOpen eBooks · doi:10.5772/intechopen.109739 · Cited by 6
Fog Density Analysis Based on the Alignment of an Airport Video and Visibility Data
Dai, M., Li, G., & Shi, W. (2024) · Sensors · doi:10.3390/s24185930 · Cited by 3
Steel Surface Automatic Detection and Segmentation Based on an Improved Faster R-CNN
Zhu, Q., Wei, T., Xu, S., Gao, Y., Shao, G., & Li, Z. (2024) · Chinese Control Conference (CCC) · doi:10.23919/ccc63176.2024.10662649 · Cited by 3
Tran, D. M., Pham, P. T., Nguyen, A. H., et al. (2024) · Research Square · doi:10.21203/rs.3.rs-4010165/v1 · Cited by 3
YOLOv8-FCS: A more focused YOLOv8 model for defect detection in images of steel surfacePreprint
Hu, B., Lu, R., Wan, D., et al. (2024) · Research Square · doi:10.21203/rs.3.rs-4368440/v1 · Cited by 3
Self-citationChauhan, R. S., Pokhariya, H. S., Negi, P., Bhatt, C., Kumar, R., Dhiman, G., Suri, A., Kumar, D., & Chowdhury, S. (2025) · AIP conference proceedings · doi:10.1063/5.0242804 · Cited by 2
Soldering Defect Detection with kNN and SVM for Quality Enhancement in Industrial
Ed-daoudy, A., Oualkadi, A. E., & Elbaghdadi, A. (2024) · International Conference on Connected Innovation and Technology (ICCITX) · doi:10.1109/iccitx61791.2024.11071005 · Cited by 3
Zhang, S., & Xia, E. (2025) · Chinese Control Conference (CCC) · doi:10.23919/ccc64809.2025.11179751 · Cited by 2
Sun, Y., Xu, C., Guo, H., Tang, Y., & Zhang, W. (2026) · Pattern Recognition Letters · doi:10.1016/j.patrec.2026.01.025 · Cited by 2
Gao, M., Kang, X., Zhou, K., & Xie, T. (2026) · Measurement · doi:10.1016/j.measurement.2026.120671 · Cited by 3
Multiclass Classification and Defect Detection of Surfaces Using Modified-YOLO
Raj, G. D., & Prabadevi, B. (2023) · International Conference on Advanced Computing · doi:10.1109/icoac59537.2023.10249530 · Cited by 3
Multiclass Classification and Defect Detection of Steel Tube Using Modified YOLO
Gurrammagari, D. R., Prabadevi, B., Gadekallu, T. R., Bhatia, S., & Saraee, M. (2023) · Communications in computer and information science · doi:10.1007/978-981-99-8184-7_32 · Cited by 2
Steel Defect Detection Using a ResNet-Inspired Model and Fourier Transforms
Anand, P., Madhavan, R., Ramachandran, V., & Prusty, M. R. (2024) · International Conference on Advances in Electrical, Computing, Communication and Sustainable Technologies (ICAECT) · doi:10.1109/icaect60202.2024.10469579 · Cited by 2
Ensemble Learning for Vietnamese Scene Text Spotting in Urban Environments
Nguyen, H. T., Ta, C.-H., Le-Nguyen, P.-T., Tran, M., & Le, T.-N. (2023) · RIVF International Conference on Computing and Communication Technologies (RIVF) · doi:10.1109/rivf60135.2023.10471878 · Cited by 2
Ensemble Transfer Learning for Hand-sign Digit Image Classification
Siddik, A. M. A., Abdal, A. M., Lawi, A., et al. (2024) · Journal of Advanced Research in Applied Sciences and Engineering Technology · doi:10.37934/araset.43.1.95111 · Cited by 2
Metadata
- Authors
- Wang, S., Xia, X., Ye, L., & Yang, B.
- Affiliations
- Chinese Academy of Sciences (CN)
- Corresponding author
- Wang, Shuai
- Venue
- Metals
- Publisher
- MDPI AG
- Published
- 2021-02-26
- Volume
- 11
- Issue
- 3
- Pages
- 388
- ISSN
- 2075-4701 (ISSN-L)
- OpenAlex
- W3134639409
- Cited by
- 184
- References
- 44
- Citations by year
- 2026: 16 · 2025: 34 · 2024: 58 · 2023: 39 · 2022: 25 · 2021: 12
- FWCI
- 17.29
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Metals (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Department of science & technology of Liaoning Province, China (XLYC180839)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Advanced Neural Network Applications
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Keywords
- steel surface defect detection, defect classification, ResNet50, Faster R-CNN, deformable convolutional networks, spatial pyramid pooling, feature pyramid network, non-maximum suppression, steel quality control, industrial production lines
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.