Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks
Open accessThe DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index; 10 of the 14 sources its claims cite were checked for support.
Abstract
Automatic detection of steel surface defects is very important for product quality control in the steel industry. However, the traditional method cannot be well applied in the production line, because of its low accuracy and slow running speed. The current, popular algorithm (based on deep learning) also has the problem of low accuracy, and there is still a lot of room for improvement. This paper proposes a method combining improved ResNet50 and enhanced faster region convolutional neural networks (faster R-CNN) to reduce the average running time and improve the accuracy. Firstly, the image input into the improved ResNet50 model, which add the deformable revolution network (DCN) and improved cutout to classify the sample with defects and without defects. If the probability of having a defect is less than 0.3, the algorithm directly outputs the sample without defects. Otherwise, the samples are further input into the improved faster R-CNN, which adds spatial pyramid pooling (SPP), enhanced feature pyramid networks (FPN), and matrix NMS. The final output is the location and classification of the defect in the sample or without defect in the sample. By analyzing the data set obtained in the real factory environment, the accuracy of this method can reach 98.2%. At the same time, the average running time is faster than other models.
Overview
CoChat Summary
TL;DR
The paper proposes a two-stage pipeline combining an improved ResNet50 classifier with an enhanced Faster R-CNN detector for steel surface defects, using a 0.3 defect-probability threshold to skip detection on likely defect-free samples. On the Severstal Kaggle dataset, the combined model reaches 0.982 accuracy with 63.3 ms average running time.
Key findings
- The combined classification + object detection model achieves 0.982 accuracy and 63.3 ms average running time, compared with 0.9752 accuracy / 2.9 ms for the improved ResNet50 alone, 0.972 accuracy / 214.5 ms for improved Faster R-CNN alone, and 0.97 accuracy / 209.4 ms for Wei et al.
- The classification model ResNet_vd_dcnV2_ImprovedCutout reaches 0.9752 accuracy with test time augmentation (TTA), with TTA increasing accuracy by about 0.05%; its running time is 2.9 ms.
- The final object detection model reaches mAP 0.876, with AP values of 0.845 for pitted surface, 0.829 for crazing, 0.913 for scratches, and 0.916 for patches; YOLOv3 scores mAP 0.704 and Faster-RCNN 0.827.
- In the combined pipeline, 7224 samples are predicted defect-free with accuracy 0.991 (7159 correct, 65 wrong); the remaining 2830 samples are processed by detection with accuracy 0.961, yielding final whole-model accuracy 0.982.
Methods
- Dataset: Kaggle “Severstal: Steel Defect Detection,” 12,568 grayscale images of size 1600 × 256, split into four 400 × 256 images, giving 50,272 samples: 37,080 without defects, 12,876 with one defect type, and 316 with two defect types; defect classes include pitted surface, crazing, scratches/scrapes, and patches; data split 80% training / 20% validation.
- Pipeline: images are resized to 224 × 224 and classified by improved ResNet50 with deformable convolution network (DCN) and improved cutout; if defect probability is less than 0.3, the sample is output as defect-free; otherwise it is resized to 800 × 1344 and passed to improved Faster R-CNN with spatial pyramid pooling (SPP), enhanced feature pyramid networks (FPN), matrix NMS, CoordConv, and modified anchors.
- Training: transfer learning from ImageNet; classification model trained for 80 epochs with learning rate 0.01 and Momentum 0.9; object detection model trained for 50 epochs with learning rate 0.0025, batch_size 4, and warmup 2500; data augmentation and weighted cross entropy / focal loss are used to address class imbalance.
Limitations
- The paper states dataset annotation problems: some pitted surface defects are not marked, some areas marked with defects have problems, and some images with defects are placed in the no-defect samples; future work will further improve the dataset and study model compression and acceleration.
- The paper states pitted surface defects are usually small and not obvious, so accuracy for this class is not high; cracking defects are narrow and long, also limiting accuracy; the final detection accuracy is lower than using the detection model on all samples because the remaining no-defect samples are more difficult to detect.
- Evident from the text: evaluation uses a single public Kaggle dataset rather than a production-line dataset, so generalization to real factory conditions is not demonstrated; class imbalance also remains substantial, with crazing defects accounting for only 1.6% of defect samples before augmentation to 800.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
8 Valid · 4 Not valid · 2 Not checked · 50 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“To improve the accuracy of small defect detection, this paper uses SPP and FPN to increase the effect of multi-scale feature extraction.”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 3. Steel Defect Dataset
What the sources say
- Not matchedcites [21][22][23][24][25]
A range of references, not one source.
- Partly supportedcites [26] Lin, T., Dollár, P., Girshick, R., He, K., Hariharan, B., and Belongie, S. (2017, January 21–26). Feature Pyramid Networks for Object Detection. Proceedings of the 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR 2017), Honolulu, HI, USA. sourceExperimental — accuracy not yet measured
The Abstract (p. 1) describes FPN as a multi-scale feature extractor, and the ablation experiments (p. 5) report improved detection of small objects relative to a single-scale baseline. The paper does not establish that SPP improves multi-scale feature extraction; Related Work (p. 3) instead describes SPPnet as efficiently using features extracted at a single image scale. (LLM, conf=0.85)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Firstly, we propose an improved faster R-CNN model, which can detect multi-scale defects better by adding spatial pyramid pooling (SPP) [21][22][23][24][25], and enhanced feature pyramid networks (FPN) [26] modules.”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 1. Introduction
What the sources say
- Not matchedcites [21][22][23][24][25]
A range of references, not one source.
- Supportedcites [26] Lin, T., Dollár, P., Girshick, R., He, K., Hariharan, B., and Belongie, S. (2017, January 21–26). Feature Pyramid Networks for Object Detection. Proceedings of the 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR 2017), Honolulu, HI, USA. source
The citation [26] is attached to the FPN module, not to the separately cited SPP module. The Introduction (p. 2) identifies the paper's method as a Feature Pyramid Network and reports improved object detection with Faster R-CNN. The citing authors' claim about their own enhanced model detecting defects is not attributed to this source. (LLM, conf=0.90)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“By counting the aspect ratio of various defects, we find a large aspect ratio for cracking and scratches defects, as shown in Figure 11a.”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 3. Steel Defect Dataset
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Figure 14 shows the change of accuracy during training.The maximum value is about 0.974.”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 4. Training
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The paper states this without a source or data behind it here, so there is nothing to check it against. The quote shows it is in the paper.
In the paper
“At the same time, the average running time is faster than other models.”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: unclear — It is unclear why the paper says it holds.
36 more claims
Create a free account to see all 64 claims and every source verdict.
- It may state two separate claims as one. 20
- Probably not a substantial claim. 2
- The quote only partly states this claim. 3
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Such methods are usually sensitive to defect size and noise, and are generally not end-to-end models that cannot meet the needs of automatic defect recognition [36].”
From Steel Surface Defect Recognition: A Survey (2022) · cites this paper as [36]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 6. Conclusions
“| Konovalenko et al. [38] | - | 0.9691 | - | - | - | - | - | | - | |”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > References
“44. Konovalenko, I.; Maruschak, P.; Brezinová, J.; Vi ňáš, J.; Brezina, J. Steel Surface Defect Classification Using Deep Residual Neural Network.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 6. Conclusions
“| Wei et al. [8] | 0.97 | 209.4 ms |”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > References
“13. Wei, R.; Song, Y.; Zhang, Y. Enhanced Faster Region Convolutional Neural Networks for Steel Surface Defect Detection.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > 6. Conclusions
“| Fadli et al. [37] | - | 0.94 | - | - | - | - | - | | - | |”
§ Automatic Detection and Classification of Steel Surface Defect Using Deep Convolutional Neural Networks > References
“43. Fadli, V.F.; Herlistiono, I.O. Steel Surface Defect Detection using Deep Learning.”
Citations
Cites
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.90 · Cited by 235,474
Very Deep Convolutional Networks for Large-Scale Image Recognition
Simonyan, K., & Zisserman, A. (2014) · arXiv · doi:10.48550/arxiv.1409.1556 · Cited by 114,148
Faster R-CNN: Towards Real-Time Object Detection with Region Proposal Networks
Ren, S., He, K., Girshick, R., & Sun, J. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2577031 · Cited by 73,472
Feature Pyramid Networks for Object Detection
Lin, T.-Y., Dollar, P., Girshick, R., He, K., Hariharan, B., & Belongie, S. (2017) · 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2017.106 · Cited by 30,939
A survey on Image Data Augmentation for Deep Learning
Shorten, C., & Khoshgoftaar, T. M. (2019) · Journal of Big Data · doi:10.1186/s40537-019-0197-0 · Cited by 13,203
Spatial Pyramid Pooling in Deep Convolutional Networks for Visual Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2015) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2015.2389824 · Cited by 11,971
Focal Loss for Dense Object Detection
Lin, T.-Y., Goyal, P., Girshick, R., He, K., & Dollar, P. (2020) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2018.2858826 · Cited by 9,556
(2007) · doi:10.5555/1283383.1283494 · Cited by 7,364
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2015) · arXiv · doi:10.48550/arxiv.1512.03385 · Cited by 4,196
Spatial Pyramid Pooling in Deep Convolutional Networks for Visual Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2014) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-10578-9_23 · Cited by 3,034
Cited by
Items 101–181 of 181
Predictive Control for Steel Rib Bending Based on Deep Learning
Xia, Y., Jinhui, L., Ou, Z., et al. (2024) · Journal of Marine Science and Engineering · doi:10.3390/jmse13010041 · Cited by 2
Advancing Automobile Manufacturing Inspections: YOLO-Based Missing Part Detection
Tayyab, M., Badar, L. T., Rehman, A. U., Durante, F., Raparelli, F., Ammar, M., & Rehman, A. U. (2024) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon55916.2024.10905858 · Cited by 3
Demir, F., & Parlak, K. Ş. (2025) · Applied Sciences · doi:10.3390/app15084255 · Cited by 2
DD-SSD: Deep Detector for Strip Steel Defects
Abualighah, S. M., Al-Naimi, A. F., & Duwairi, R. (2022) · International Conference on Information and Communication Systems (ICICS) · doi:10.1109/icics55353.2022.9811123 · Cited by 2
CNN and Random Forest Fusion for Enhanced Steel Defect Classification
Rawat, S., Banerjee, D., Aggarwal, P., & Singh, M. K. (2024) · International Conference on Advances in Modern Age Technologies for Health and Engineering Science (AMATHE) · doi:10.1109/amathe61652.2024.10582052 · Cited by 2
Outer Surface Defect Detection of Steel Pipes with 3d Vision Based on Multi-Line Structured LightsPreprint
Jin, L., Li, S., Qin, G., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4531353 · Cited by 2
Otieno, S., Kotak, N. A., & Parmar, C. (2023) · Research Square · doi:10.21203/rs.3.rs-3281494/v1 · Cited by 2
In-process detection of miniature size holes in cold-rolled steel strips
Patra, D., Chavhan, S., & Kundu, C. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10388-9 · Cited by 1
Smart Workflows for Advanced Quality Assessment in Steel Industry: Benefits of I5.0
Ordieres-Meré, J. B., Rahabi, A., Falkowski, D., et al. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-56474-1_5 · Cited by 1
Dental bur detection system based on asymmetric double convolution and adaptive feature fusion
Hou, H., Yang, A., Li, X., et al. (2024) · Scientific Reports · doi:10.1038/s41598-024-83241-6 · Cited by 1
Realising Quality Control of Metal Products Used in Industry Through Deep Learning
Özyer, B., & Taşpınar, Y. S. (2024) · Intelligent Methods in Engineering Sciences · doi:10.58190/imiens.2024.114 · Cited by 1
LDDP-Net: A Lightweight Neural Network with Dual Decoding Paths for Defect Segmentation of LED Chips
Zhang, J., Chen, N., Li, M., et al. (2025) · Sensors · doi:10.3390/s25020425 · Cited by 1
Dhiviya Bharathi, D., Varsha, L., Khushalini, P., et al. (2024) · doi:10.1109/mpcit62449.2024.10892616 · Cited by 1
Transfer Learning-Based Ensemble Model for Hot-rolled Steel Surface Defects Classification
Ibrahim, A. A. M. S., & Tapamo, J. (2025) · Journal of Artificial Intelligence and Technology · doi:10.37965/jait.2025.0683 · Cited by 2
Cui, J., Li, J., Mei, Z., Ni, Y., Chen, W., & Li, Z. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3593591 · Cited by 1
Xiong, J., Zhang, Q., Wang, Q., Yang, J., Dong, X., & Liang, Q. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-16431-9 · Cited by 1
Research on Industrial Defect Detection Based on Deep Learning and Ensemble Learning
Wang, S., Zhao, Z., & Shi, X. (2025) · IEEE International Conference on Power, Intelligent Computing and Systems (ICPICS) · doi:10.1109/icpics66386.2025.11347325 · Cited by 1
Self-citationGao, K., Li, B., Wang, S., Di, Y., & Jia, S. (2026) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-026-02874-8 · Cited by 1
Self-citationKumar, B., Singh, S. K., Kumar, S., & Sinha, B. B. (2026) · Australian Journal of Mechanical Engineering · doi:10.1080/14484846.2026.2675149 · Cited by 1
Simon, P., & Uma, V. (2022) · Lecture notes in networks and systems · doi:10.1007/978-3-030-96302-6_28 · Cited by 1
Deep Learning-Based Defects Detection of Steel Sheet Surface Using Object-level Data Augmentation
Ahn, I., & Kim, S. B. (2022) · Journal of Korean Institute of Industrial Engineers · doi:10.7232/jkiie.2022.48.4.327 · Cited by 1
Emotion Recognition - Recent Advances, New Perspectives and Applications
Hosseini, S. A. (2023) · IntechOpen eBooks · doi:10.5772/intechopen.104074 · Cited by 2
Improved faster-RCNN based inspection of hydraulic cylinder internal surface defects
Zhang, X., Zhou, Q., Wu, C., Pan, J., & Qi, H. (2023) · International Conference on Artificial Intelligence, Automation and High Performance Computing (AIAHPC) · doi:10.1117/12.2687001 · Cited by 1
Research on Visual Inspection for Defects in Lithium Battery Packaging Based on Faster R-CNN
Li, L., Sun, H., & Msalika, O. P. (2023) · International Symposium on Computer Engineering and Intelligent Communications (ISCEIC) · doi:10.1109/isceic59030.2023.10271224 · Cited by 4
Colorectal Cancer Prediction using Deep Learning
Muzenda, A. C., Chimpeni, F. O., & Masimba, F. (2023) · Zimbabwe Conference of Information and Communication Technologies (ZCICT) · doi:10.1109/zcict59466.2023.10528420 · Cited by 1
Detection Method of Stator Coating Quality of Flat Wire Motor Based on Improved YOLOv8s
Wang, H., Chen, G., Rong, X., Zhang, Y., Song, L., & Shang, X. (2024) · Sensors · doi:10.3390/s24165392 · Cited by 1
Detection Method of Steel Surface Defects Based on Semi-Supervised Frame
Lei, M., Qi, W., Chen, Y., Xinyi, H., Hujian, P., & Xinru, H. (2024) · IEEE International Conference on Software Engineering and Artificial Intelligence (SEAI) · doi:10.1109/seai62072.2024.10674129 · Cited by 1
AI-Powered Approaches for Hypersurface Reconstruction in Multidimensional Spaces
Yotov, K., Hadzhikolev, E. N., Hadzhikoleva, S., et al. (2024) · Mathematics · doi:10.3390/math12203285 · Cited by 1
Residual Multi-Attention U-Net for Image Segmentation in Heavy Plate Hot Rolling Process
Zheng, G. S., Ma, Y., Huang, J., & Wu, G. (2024) · International Conference on Industrial Artificial Intelligence (IAI) · doi:10.1109/iai63275.2024.10730616 · Cited by 2
Enhanced Metal Sheet Quality Control Using CNN and SVM Integration
Singh, A., Gill, K. S., Kumar, M., & Rawat, R. (2024) · International Conference on Electrical Electronics and Computing Technologies (ICEECT) · doi:10.1109/iceect61758.2024.10739300 · Cited by 1
Park, M., Jung, J., Moon, H., Park, D., Go, M., Noh, H., Lim, J. H., & Ryu, S. (2025) · Advanced Theory and Simulations · doi:10.1002/adts.202401311 · Cited by 1
A Hierarchical Multi-Scale Feature Fusion-Based Classification Model for Metal Defects
Li, J., & Liu, J. (2025) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-025-10223-9 · Cited by 2
Performance Evaluation of Transfer Learning for Surface Defect Classification
Benbarrad, T., Arioua, M., & Hatim, A. (2022) · Lecture notes in networks and systems · doi:10.1007/978-3-030-94191-8_79 · Cited by 1
Detecting aluminium tube surface defects by using faster region-based convolutional neural networks
Chen, S., Wang, D.-G., & Wang, F.-B. (2022) · Journal of Computational Methods in Sciences and Engineering · doi:10.3233/jcm-226107 · Cited by 2
Automatic Inspection Method of Power System Based on Image Recognition
Wu, Y., Ma, J., He, J., et al. (2023) · doi:10.1109/pandafpe57779.2023.10140689 · Cited by 1
Bannigidad, P., Potraj, N., Udoshi, J., & Gurubasavaraj, P. M. (2023) · Research Square · doi:10.21203/rs.3.rs-3201733/v1 · Cited by 1
Heavy-loaded Vehicles Detection Model Testing using Synthetic Dataset
Karjadi, D. A., Wedha, B. Y., & Santoso, H. (2022) · SinkrOn · doi:10.33395/sinkron.v7i2.11378
Metal Surface Defect Detection using Segmentation and Decision Networks
Dengale, P., Karkhanis, R., Phadke, B., & Gaidhane, V. K. (2022) · International Journal for Research in Applied Science and Engineering Technology · doi:10.22214/ijraset.2022.41978
Automatic Thread Defect Examination System
Kim, J. (2022) · Applied Sciences · doi:10.3390/app12126109
On-Demand Multiclass Imaging for Sample Scarcity in Industrial Environments
Orti, J., Moreno-Noguer, F., & Puig, V. (2023) · doi:10.1145/3589572.3589573
Outer Surface Defect Detection of Steel Pipes with 3d Vision Based on Multi-Line Structured LightPreprint
Jin, L., Li, S., Qin, G., et al. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4501266
Steel Surface Defect Classification Based on Legendre Multiwavelet Transform and SVMPreprint
zheng, X., Liu, W., & Huang, Y. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4524941
Research on fabric yarn detection based on improved fast R-CNN algorithm
Zhang, Y. (2023) · Applied Mathematics and Nonlinear Sciences · doi:10.2478/amns.2023.2.00449
Surface Defect Detection on Strip Steel Based on Hybrid Attention Mechanism and Yolov8Preprint
Zhang, Y., Shen, S., & Xu, S. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4588486
Kripalani, K. (2023) · Intelligent Methods in Engineering Sciences · doi:10.58190/imiens.2023.46
SignNet: A Deep Learning Architecture for Accurate Sign Language Recognition from Images
Sahu, K., Saraswat, T., & Sawhney, R. (2023) · International Conference on Computing, Communication and Networking Technologies (ICCCNT) · doi:10.1109/icccnt56998.2023.10306591
Transfer Learning-Based Facial Emotion Recognition with PSO-Based Hyper-Parameter Tuning
Prasad, R. R., & Li, Z. (2023) · International Conference on Machine Learning and Cybernetics · doi:10.1109/icmlc58545.2023.10327963
A Surface Defect Detection Method Based on Attention Mechanism for Workpieces
Qiu, J., Shen, Y., Feng, W., Zhang, H., Sun, K., & Qin, Y. (2023) · IEEE International Conference on Cognitive Computing and Complex Data (ICCD) · doi:10.1109/iccd59681.2023.10420733
Enhanced Defect Classification With CNN’s And path Aggregation Network
Khedidja, M., Abbas, F., & Hemam, M. (2024) · International Conference on Image and Signal Processing and their Applications (ISPA) · doi:10.1109/ispa59904.2024.10536835
U-net Architecture-Based Image Detection Model Development for Defect Detection in Hot Rolling Mill
Park, S.-E., Choi, S.-W., & Lee, E. (2024) · Lecture notes in civil engineering · doi:10.1007/978-981-97-1972-3_81
(2023) · Zimbabwe Conference of Information and Communication Technologies (ZCICT) · doi:10.1109/zcict59466.2023.10528394
Microstructure Identification of Iron-Carbon Alloys Using Deep Learning
Gao, Z., Zhou, Y., & Huang, W. (2024) · doi:10.1145/3697467.3697664
Deep Learning Application and Analysis In Detection of Metal Plate Surface Defects
Tuncer, C., Közkurt, C., & Kılıçarslan, S. (2024) · Journal of Materials and Mechatronics A · doi:10.55546/jmm.1512549
Development of Computer Vision Based Aluminium Scrap Sorting Using Real Time Metal Scrap Dataset
Adhithya, S., & Kathirvelan, J. (2024) · doi:10.1109/icses63445.2024.10763241
Effective and Lightweight Surface Defect Detection via Enhanced Deep Learning Models
Kayanzari, K. P., Li, H.-Z., & Zhang, J. (2024) · IEEE International Conference on Big Data (BigData) · doi:10.1109/bigdata62323.2024.10825832
Innovative Insights: Unifying CNN and SVM for Broad Metal Sheet Defect Detection
Mir, T. A., Banerjee, D., Chauhan, R. S., & Pokhariya, H. S. (2024) · Asian Conference on Innovation in Technology (ASIANCON) · doi:10.1109/asiancon62057.2024.10837840
An efficient and lightweight image detection model based on YOLOv8 and its application
Chen, J., Zhao, J., & Sun, Y. (2025) · Workshop on Electronics Communication Engineering (WECE) · doi:10.1117/12.3061987
A Deep Learning Model for Detection of Lung Pathologies by Image Processing of X-ray Images
Shahid, E., Tariq, A., Rauf, S. B., Nauman, M. A., Yousaf, F., & Abdullah, M. (2024) · International Multi-Topic Conference · doi:10.1109/inmic64792.2024.11004404
Modified Vision Graph Neural Network-based Steel Surface Defect Classification
Liu, Y., Zhang, H., Chen, X., Wu, C., & Hsiang, H.-C. (2025) · International Conference on Cloud Computing and Big Data Analytics (ICCCBDA) · doi:10.1109/icccbda64898.2025.11030497
Innovative Approach to Predicting Sheet Metal Narrow Strip Defects: CNN-SVM Harmony
Mir, T. A., Banerjee, D., Chauhan, R. S., et al. (2024) · International Conference on Control, Computing, Communication and Materials (ICCCCM) · doi:10.1109/iccccm61016.2024.11039932
Improved Lightweight Steel Surface Defect Detection Algorithm of YOLOv8
Zhang, L., & Zhou, Z. (2025) · International Conference on Computer, Control and Robotics (ICCCR) · doi:10.1109/icccr65461.2025.11072579
Efficient Surface Defect Detection via Multi-scale Features and Lightweight Attention
Huang, X., Yu, H., Liang, A., Gao, Y., & Si, P. (2025) · Lecture notes in computer science · doi:10.1007/978-981-96-9856-1_34
Synthetic Data Generation for Enhanced Visual Metal Defect Detection
Mătase, S., & Andonie, R. (2025) · International Conference on Information Visualisation (IV) · doi:10.1109/iv68685.2025.00050 · Cited by 2
Duarte, J., Claro, M. F., Vitoriano, P. M. A., Amaral, T. G., & Pires, V. F. (2025) · Eng—Advances in Engineering · doi:10.3390/eng6110302 · Cited by 4
Ibrahim, A. A. M. S., & Tapamo, J. (2025) · Lecture notes in networks and systems · doi:10.1007/978-3-032-02312-4_3
Devi, M. S., Saravanan, P., Natarajan, Y., & Preethaa, K. R. S. (2025) · Array · doi:10.1016/j.array.2025.100647
Hou, K., Li, R., Liu, H., Zhou, J., Liu, X., & Gao, H. (2026) · Engineering Research Express · doi:10.1088/2631-8695/ae352c
Contrastive learning enhanced MobileMamba for real time industrial defect detection on edge devices
Huang, J., Ariffin, S. A., Yang, Q., et al. (2026) · Scientific Reports · doi:10.1038/s41598-026-35515-4
Zheng, Q., Xu, S., Liu, J. S., et al. (2026) · Archive of Applied Mechanics · doi:10.1007/s00419-026-03025-4
MAD-YOLO: A High-Precision Lightweight Algorithm for Cable Defect Detection
Zhang, Z., Chen, M., Jiang, N., Zhu, L., Lin, Z., Li, X. L., & Zhang, X. (2025) · International Conference on Electronic Information Engineering and Computer Technology (EIECT) · doi:10.1109/eiect68017.2025.11331867
Performance Evaluation of Advanced Machine Learning Algorithms for Surface Defect Detection
Zhu, B. (2024) · International Conference on Applied Machine Learning (ICAML) · doi:10.1109/icaml64299.2024.00063
An Enhanced YOLOv8 Method-Based Steel Surface Defect Identification Algorithm
He, X., Zhang, C., Xu, X., & Xi, Z. (2025) · International Conference on Big Data Applications, Mechatronics Engineering and Automation (BDAMEA) · doi:10.1109/bdamea68159.2025.11406726
LA-DETR: Local Attention and Multi-Scale Aggregation for Real-Time Steel Defect Detection
Fu, R., Tong, J., Zhao, Q., et al. (2025) · International Conference on Electronic Information Engineering and Computer Communication (EIECC) · doi:10.1109/eiecc67963.2025.11409533
CA 2 M: Enhancing Steel Surface Defect Detection with Swin-YOLOv11
Wang, L., Zhu, X., Zhang, L., et al. (2025) · International Conference on Advanced Computer Theory and Engineering · doi:10.1109/icacte66284.2025.11412182
Enhanced Multi-Scale Defect Detection in Steel Surfaces via Innovative Deep Learning Architecture
Zhou, Z., & Cao, Y. (2026) · Sensors · doi:10.3390/s26062001 · Cited by 1
Zhang, W., Guo, C., Guo, J. Q., Du, B., & Guo, S. (2026) · Engineering Research Express · doi:10.1088/2631-8695/ae50cb
Shen, Z. J., Deng, Q., Wu, Z., et al. (2026) · Scientific Reports · doi:10.1038/s41598-026-45556-4
He, H., 陈害灏, Zhao, G., et al. (2026) · Materials Characterization · doi:10.1016/j.matchar.2026.116415
Yao, Y., Liu, J., Meng, F., & Zhou, Z. (2026) · Materials Characterization · doi:10.1016/j.matchar.2026.116560 · Cited by 1
Improved PCB Defect Detection Algorithm Based on YOLOv12 with Global–Local Feature Enhancement
Wu, Z., Liu, Z., & Hao, Z. (2026) · International Conference on Computer, Control and Robotics (ICCCR) · doi:10.1109/icccr69988.2026.11642718
Sharma, N., Nancy, V., Angappan, S. K., Ganesan, S., Tripathy, A. K., Gupta, S., Vashisth, A., Choudari, S., & Saleela, D. (2026) · Engineering Technology & Applied Science Research · doi:10.48084/etasr.20357
Metadata
- Authors
- Wang, S., Xia, X., Ye, L., & Yang, B.
- Affiliations
- Chinese Academy of Sciences (CN)
- Corresponding author
- Wang, Shuai
- Venue
- Metals
- Publisher
- MDPI AG
- Published
- 2021-02-26
- Volume
- 11
- Issue
- 3
- Pages
- 388
- ISSN
- 2075-4701 (ISSN-L)
- OpenAlex
- W3134639409
- Cited by
- 184
- References
- 44
- Citations by year
- 2026: 16 · 2025: 34 · 2024: 58 · 2023: 39 · 2022: 25 · 2021: 12
- FWCI
- 17.29
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Metals (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Department of science & technology of Liaoning Province, China (XLYC180839)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Advanced Neural Network Applications
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Keywords
- steel surface defect detection, defect classification, ResNet50, Faster R-CNN, deformable convolutional networks, spatial pyramid pooling, feature pyramid network, non-maximum suppression, steel quality control, industrial production lines
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.