The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Advanced Metal Matrix Nanocomposites
Open accessAbstract
Lightweight high-strength metal matrix nano-composites (MMNCs) can be used in a wide variety of applications, e.g., aerospace, automotive, and biomedical engineering, owing to their sustainability, increased specific strength/stiffness, enhanced elevated temperature strength, improved wear, or corrosion resistance. A metallic matrix, commonly comprising of light aluminum or magnesium alloys, can be significantly strengthened even by very low weight fractions (~1 wt%) of well-dispersed nanoparticles. This review discusses the recent advancements in the fabrication of metal matrix nanocomposites starting with manufacturing routes and different nanoparticles, intricacies of the underlying physics, and the mechanisms of particle dispersion in a particle-metal composite system. Thereafter, the microstructural influences of the nanoparticles on the composite system are outlined and the theory of the strengthening mechanisms is also explained. Finally, microstructural, mechanical, and tribological properties of the selected MMNCs are discussed as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical alloying and milling
Suryanarayana, C. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00010-9 · Cited by 8,075
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756 · cited 1×
“Carbides, borides, nitrides, and oxides are used to reinforce metallic materials in the nanoparticle form [83,84], usually produced industrially at low cost and deployed in the grinding and polishing industry; especially, SiC, B4C, Al2O3, AlN, BN, and TiB2 are technically and economically relevant examples.”
BackgroundStrength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load
Yu, M.-F., Lourie, O., Dyer, M. J., Moloni, K., Kelly, T. F., & Ruoff, R. S. (2000) · Science · doi:10.1126/science.287.5453.637 · Cited by 5,310
Huang, X., Qi, X., Boey, F., & Zhang, H. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15078b · Cited by 3,837
The Cleavage Strength of Polycrystals
Petch, N. J. (1953) · Medical Entomology and Zoology · Cited by 3,641
Cavitation and Bubble Dynamics
Brennen, C. E. (2013) · Cambridge University Press eBooks · doi:10.1017/cbo9781107338760 · Cited by 3,265
The properties and applications of nanodiamonds
Mochalin, V. N., Shenderova, O., Ho, D., & Gogotsi, Y. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2011.209 · Cited by 2,745
Tensile Loading of Ropes of Single Wall Carbon Nanotubes and their Mechanical Properties
Yu, M.-F., Files, B. S., Arepalli, S., & Ruoff, R. S. (2000) · Physical Review Letters · doi:10.1103/physrevlett.84.5552 · Cited by 2,696
Particle reinforced aluminium and magnesium matrix composites
Lloyd, D. J. (1994) · International Materials Reviews · doi:10.1179/095066094790150982 · Cited by 2,227
Bubble Dynamics and Cavitation
Plesset, M. S., & Prosperetti, A. (1977) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fl.09.010177.001045 · Cited by 2,049
Applications of Ultrasound to the Synthesis of Nanostructured Materials
Bang, J. H., & Suslick, K. S. (2010) · Advanced Materials · doi:10.1002/adma.200904093 · Cited by 1,895
Particulate reinforced metal matrix composites — a review
Ibrahim, I. A., Mohamed, F. A., & Lavernia, E. J. (1991) · Journal of Materials Science · doi:10.1007/bf00544448 · Cited by 1,767
XVI.On musical air-bubbles and the sounds of running water
Minnaert, M. (1933) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786443309462277 · Cited by 1,350
Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process
Saito, Y., Tsuji, N., Utsunomiya, H., Sakai, T., & Hong, R. (1998) · Scripta Materialia · doi:10.1016/s1359-6462(98)00302-9 · Cited by 1,259
Flint, E. B., & Suslick, K. S. (1991) · Science · doi:10.1126/science.253.5026.1397 · Cited by 1,200
The role of interparticle and external forces in nanoparticle assembly
Min, Y., Akbulut, M., Kristiansen, K., Golan, Y., & Israelachvili, J. (2008) · Nature Materials · doi:10.1038/nmat2206 · Cited by 1,182
Sonochemical synthesis of nanomaterials
Xu, H., Zeiger, B. W., & Suslick, K. S. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35282f · Cited by 1,161
Tjong, S. C. (2013) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2013.08.001 · Cited by 1,155
Fundamentals of Multiphase Flow
Brennen, C. E. (2005) · Cambridge University Press eBooks · doi:10.1017/cbo9780511807169 · Cited by 1,065
Dorri Moghadam, A., Omrani, E., Menezes, P. L., & Rohatgi, P. K. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.03.014 · Cited by 906
Self-citationReinforcement with graphene nanosheets in aluminum matrix composites
Wang, J., Li, Z., Fan, G., Pan, H., Chen, Z., & Zhang, D. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.01.012 · Cited by 882
Industrial applications of nanoparticles
Stark, W. J., Stoessel, P. R., Wohlleben, W., & Hafner, A. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00362d · Cited by 878
Ultrasound in synthetic organic chemistry
Mason, T. J. (1997) · Chemical Society Reviews · doi:10.1039/cs9972600443 · Cited by 759
Mechanically alloyed nanocomposites
Suryanarayana, C., & Al-Aqeeli, N. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.10.001 · Cited by 750
Strengthening effect of single-atomic-layer graphene in metal–graphene nanolayered composites
Kim, Y., Lee, J., Yeom, M. S., Shin, J. W., Kim, H., Cui, Y., Kysar, J. W., Hone, J., Jung, Y., Jeon, S., et al. (2013) · Nature Communications · doi:10.1038/ncomms3114 · Cited by 682
Mesoporous carbon nitrides: synthesis, functionalization, and applications
Lakhi, K. S., Park, D.-H., Al-Bahily, K., Cha, W., Viswanathan, B., Choy, J.-H., & Vinu, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00532b · Cited by 627
Calvert, P. (1999) · Nature · doi:10.1038/20326 · Cited by 597
Alternative energy input: mechanochemical, microwave and ultrasound-assisted organic synthesis
Baig, R. B. N., & Varma, R. S. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15204a · Cited by 587
Self-citationLauterborn, W., & Ohl, C.-D. (1997) · Ultrasonics Sonochemistry · doi:10.1016/s1350-4177(97)00009-6 · Cited by 422
MWCNTs/AZ31 surface composites fabricated by friction stir processing
Morisada, Y., Fujii, H., Nagaoka, T., & Fukusumi, M. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.01.016 · Cited by 409
Ultrasonic Cavitation at Solid Surfaces
Shchukin, D. G., Skorb, E., Belova, V., & Möhwald, H. (2011) · Advanced Materials · doi:10.1002/adma.201004494 · Cited by 387
Novel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites
Chen, L.-Y., Konishi, H., Fehrenbacher, A., Ma, C., Xu, J.-Q., Choi, H., Xu, H.-F., Pfefferkorn, F. E., & Li, X.-C. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.03.013 · Cited by 336
Turnbull, D. (1956) · Solid State Physics · doi:10.1016/s0081-1947(08)60134-4 · Cited by 293
On the mechanochemical activation by ultrasound
Cravotto, G., Gaudino, E. C., & Cintas, P. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35456j · Cited by 232
Ductility improvement and fatigue studies in Mg-CNT nanocomposites
Goh, C. S., Wei, J., Lee, L. C., & Gupta, M. K. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.10.057 · Cited by 213
Self-citationUltrafine-grained Al–Al2Cu composite produced in situ by friction stir processing
Hsu, C. J., Kao, P. W., & Ho, N. J. (2005) · Scripta Materialia · doi:10.1016/j.scriptamat.2005.04.006 · Cited by 189
Lin, D., Richard Liu, C., & Cheng, G. J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.07.038 · Cited by 188
Cao, G., Konishi, H., & Li, X. (2007) · Materials Science and Engineering A · doi:10.1016/j.msea.2007.09.054 · Cited by 177
A High-Speed Imaging and Modeling Study of Dendrite Fragmentation Caused by Ultrasonic Cavitation
Shu, D., Sun, B., Mi, J., & Grant, P. S. (2012) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1188-3 · Cited by 154
The Freezing of Supercooled Water
Mossop, S. C. (1955) · Proceedings of the Physical Society Section B · doi:10.1088/0370-1301/68/4/301 · Cited by 146
Jamaati, R., Amirkhanlou, S., Toroghinejad, M. R., & Niroumand, B. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.11.056 · Cited by 141
The growth and collapse of cavitation bubbles near composite surfaces
SHIMA, A., TOMITA, Y., Gibson, D. C., & Blake, J. R. (1989) · Journal of Fluid Mechanics · doi:10.1017/s0022112089001436 · Cited by 140
Nanoparticle-induced unusual melting and solidification behaviours of metals
Ma, C., Chen, L., Cao, C., & Li, X. (2017) · Nature Communications · doi:10.1038/ncomms14178 · Cited by 131
Gao, Q., Wu, S., Lü, S., Xiong, X., Du, R., & An, P. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.013 · Cited by 130
Ultrasonic Cavitation Based Nanomanufacturing of Bulk Aluminum Matrix Nanocomposites
Yang, Y., & Li, X. (2006) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2714583 · Cited by 112
In situ observation and analysis of ultrasonic capillary effect in molten aluminium
Tzanakis, I. Z., Xu, W., Eskin, D. G., Lee, P. D., & Kotsovinos, N. E. (2015) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2015.04.029 · Cited by 110
Self-citationCytotoxicity and Genotoxicity of Carbon Nanomaterials
Schrand, A. M., Johnson, J. F., Dai, L., Hussain, S. M., Schlager, J. J., Zhu, L. H., Hong, Y., & O̅sawa, E. (2008) · Nanostructure science and technology · doi:10.1007/978-0-387-78608-7_8 · Cited by 84
Nanoceramic Matrices: Biomedical Applications
Paul, W., & Sharma, C. P. (2006) · American journal of biochemistry & biotechnology/American journal of biochemistry and biotechnology · doi:10.3844/ajbbsp.2006.41.48 · Cited by 82
Accumulative press bonding; a novel manufacturing process of nanostructured metal matrix composites
Amirkhanlou, S., Ketabchi, M., Parvin, N., Khorsand, S., & Bahrami, R. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.04.032 · Cited by 67
Trinh, P. V., Bui, H. T., Tran, B. T., Nguyen, V. T., Le, D. Q., Than, X. T., Nguyen, V. C., Doan, D. P., & Phan, N. M. (2011) · Advances in Natural Sciences Nanoscience and Nanotechnology · doi:10.1088/2043-6262/2/1/015006 · Cited by 60
Synthesis and recent advances in tribological applications of graphene
Kasar, A. K., & Menezes, P. L. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2019-5 · Cited by 56
Self-citationGraphene-Reinforced Metal and Polymer Matrix Composites
Kasar, A. K., Xiong, G., & Menezes, P. L. (2018) · JOM · doi:10.1007/s11837-018-2823-2 · Cited by 53
Self-citationRecent progress of abrasion-resistant materials: learning from nature
Meng, J., Zhang, P., & Wang, S. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00459d · Cited by 52
The influence of TiO2 nano-particles on bond strength of cold roll bonded aluminum strips
Soltani, M. A., Jamaati, R., & Toroghinejad, M. R. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.04.089 · Cited by 47
Microstructure and mechanical properties of Al/SiO2 composite produced by CAR process
Hashemi, M., Jamaati, R., & Toroghinejad, M. R. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.10.091 · Cited by 37
Gong, H., Anasori, B., Dennison, C. R., Wang, K., Kumbur, E. C., Strich, R., & Zhou, J. G. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5441-3 · Cited by 23
Khabushan, J. K., & Bonabi, S. B. (2017) · Open Journal of Metal · doi:10.4236/ojmetal.2017.71002 · Cited by 17
Carbon Nanotube (CNT)-Reinforced Metal Matrix Bulk Composites: Manufacturing and Evaluation
Suarez, S., Reinert, L., & Mücklich, F. (2016) · InTech eBooks · doi:10.5772/63886 · Cited by 15
SiC Nanoparticles Reinforced Magnesium Alloys by Semisolid Process
Wang, Z. H., Kang, Y. L., Zhao, H. J., et al. (2006) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/3-908451-26-4.163 · Cited by 4
Cited by
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Mechanotribological Aspects of MXene‐Reinforced Nanocomposites
Malaki, M., & Varma, R. S. (2020) · Advanced Materials · doi:10.1002/adma.202003154 · Cited by 292
Self-citation
Metadata
- Authors
- Malaki, M., Xu, W., Kasar, A. K., Menezes, P. L., Dieringa, H., Varma, R. S., & Gupta, M.
- Venue
- Metals
- Publisher
- MDPI AG
- Published
- 2019-03-15
- Volume
- 9
- Issue
- 3
- Pages
- 330
- ISSN
- 2075-4701 (ISSN-L)
- OpenAlex
- W2921140582
- Cited by
- 292
- References
- 60
- FWCI
- 17.72
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.