The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Path Planning Strategies to Optimize Accuracy, Quality, Build Time and Material Use in Additive Manufacturing: A Review
Open accessAbstract
Additive manufacturing (AM) is the process of joining materials layer by layer to fabricate products based on 3D models. Due to the layer-by-layer nature of AM, parts with complex geometries, integrated assemblies, customized geometry or multifunctional designs can now be manufactured more easily than traditional subtractive manufacturing. Path planning in AM is an important step in the process of manufacturing products. The final fabricated qualities, properties, etc., will be different when using different path strategies, even using the same AM machine and process parameters. Currently, increasing research studies have been published on path planning strategies with different aims. Due to the rapid development of path planning in AM and various newly proposed strategies, there is a lack of comprehensive reviews on this topic. Therefore, this paper gives a comprehensive understanding of the current status and challenges of AM path planning. This paper reviews and discusses path planning strategies in three categories: improving printed qualities, saving materials/time and achieving objective printed properties. The main findings of this review include: new path planning strategies can be developed by combining some of the strategies in literature with better performance; a path planning platform can be developed to help select the most suitable path planning strategy with required properties; research on path planning considering energy consumption can be carried out in the future; a benchmark model for testing the performance of path planning strategies can be designed; the trade-off among different fabricated properties can be considered as a factor in future path planning design processes; and lastly, machine learning can be a powerful tool to further improve path planning strategies in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Additive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
Gu, G. X., Chen, C.-T., Richmond, D. J., & Buehler, M. J. (2018) · Materials Horizons · doi:10.1039/c8mh00653a · Cited by 556
Support Structures for Additive Manufacturing: A Review
Jiang, J., Xu, X., & Stringer, J. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2040064 · Cited by 527
Self-citationPrediction of surface roughness in extrusion-based additive manufacturing with machine learning
Li, Z., Zhang, Z., Shi, J., & Wu, D. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.01.004 · Cited by 432
Machine learning-based image processing for on-line defect recognition in additive manufacturing
Caggiano, A., Zhang, J., Alfieri, V., Caiazzo, F., Gao, R., & Teti, R. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.03.021 · Cited by 417
Scime, L., & Beuth, J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2018.11.010 · Cited by 369
Ding, D., Pan, Z. S., Cuiuri, D., et al. (2015) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.01.003 · Cited by 336
Review: The Impact of Metal Additive Manufacturing on the Aerospace Industry
Mohd Yusuf, S., Cutler, S., & Gao, N. (2019) · Metals · doi:10.3390/met9121286 · Cited by 332
In-Process monitoring of porosity during laser additive manufacturing process
Zhang, B., Liu, S., & Shin, Y. C. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.030 · Cited by 281
A Perspective on Using Machine Learning in 3D Bioprinting
Yu, C., & Jiang, J. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i1.253 · Cited by 213
Self-citationDeep Learning for Distortion Prediction in Laser-Based Additive Manufacturing using Big Data
Francis, J., & Bian, L. (2019) · Manufacturing Letters · doi:10.1016/j.mfglet.2019.02.001 · Cited by 209
Machine learning in tolerancing for additive manufacturing
Zhu, Z., Anwer, N., Huang, Q., & Mathieu, L. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.119 · Cited by 184
Baturynska, I., Semeniuta, O., & Martinsen, K. (2018) · Procedia CIRP · doi:10.1016/j.procir.2017.12.204 · Cited by 182
Li, N., Link, G., Wang, T., Ramopoulos, V., Neumaier, D., Hofele, J., Walter, M., & Jelonnek, J. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107612 · Cited by 182
An adaptive process planning approach of rapid prototyping and manufacturing
Jin, G. Q., Li, W. D., & Gao, L. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2012.07.001 · Cited by 181
Adaptive path planning for wire-feed additive manufacturing using medial axis transformation
Ding, D., Pan, Z. S., Cuiuri, D., Li, H., & Larkin, N. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.036 · Cited by 174
Additive manufacturing. General principles. Terminology
(2016) · doi:10.3403/30331378 · Cited by 166
Simple method to construct process maps for additive manufacturing using a support vector machine
Aoyagi, K., Wang, H., Sudo, H., & Chiba, A. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.013 · Cited by 164
3D printed medical parts with different materials using additive manufacturing
Haleem, A., & Javaid, M. (2019) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2019.08.002 · Cited by 164
Machine-learning based design of active composite structures for 4D printing
Hamel, C. M., Roach, D. J., Long, K. N., Demoly, F., Dunn, M. L., & Qi, H. J. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab1439 · Cited by 159
Khanzadeh, M., Rao, P., Jafari-Marandi, R., Smith, B. K., Tschopp, M. A., & Bian, L. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4038598 · Cited by 156
Tootooni, M. S., Dsouza, A., Donovan, R., Rao, P., Kong, Z., & Børgesen, P. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036641 · Cited by 153
Ding, Y., Dwivedi, R., & Kovacevic, R. (2016) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2016.08.008 · Cited by 144
Jiang, J., Hu, G., Li, X., Xu, X. W., Zheng, P., & Stringer, J. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1576010 · Cited by 141
Self-citationOptimization of Silicone 3D Printing with Hierarchical Machine Learning
Menon, A. K., Póczos, B., Feinberg, A. W., & Washburn, N. R. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0088 · Cited by 117
Concurrent deposition path planning and structural topology optimization for additive manufacturing
Liu, J., & Yu, H. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2016-0087 · Cited by 106
Jiang, J., Stringer, J., Xu, X. W., & Zhong, R. Y. (2018) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2018.1466398 · Cited by 104
Self-citationMachine learning for continuous liquid interface production: Printing speed modelling
He, H., Yang, Y., & Pan, Y. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.01.004 · Cited by 95
Design and experimental validation of self-supporting topologies for additive manufacturing
Fu, Y.-F., Rolfe, B., Chiu, L. N. S., Wang, Y., Huang, X., & Ghabraie, K. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1637023 · Cited by 73
Functionally Graded Materials through robotics-inspired path planning
Eliseeva, O. V., Kirk, T., Samimi, P., Malak, R., Arróyave, R., Elwany, A. H., & Karaman, İ. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107975 · Cited by 67
Achieving better connections between deposited lines in additive manufacturing via machine learning
Jiang, J., Yu, C., Xu, X. W., Ma, Y., & Liu, J. (2020) · Mathematical Biosciences & Engineering · doi:10.3934/mbe.2020191 · Cited by 67
Self-citationVolumetric covering print-paths for additive manufacturing of 3D models
Ezair, B., Fuhrmann, S., & Elber, G. (2018) · Computer-Aided Design · doi:10.1016/j.cad.2018.02.006 · Cited by 61
Process Planning for the Fuse Deposition Modeling of Ankle-Foot-Othoses
Jin, Y. Q., He, Y., & Shih, A. J. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.02.315 · Cited by 49
Light-weight shape and topology optimization with hybrid deposition path planning for FDM parts
Liu, J., Ma, Y., Qureshi, A. J., & Ahmad, R. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1955-4 · Cited by 48
Self-citationParametric studies and manufacturability experiments on smooth self-supporting topologies
Fu, Y.-F., Rolfe, B., Chiu, L. N. S., Wang, Y., Huang, X., & Ghabraie, K. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1644185 · Cited by 37
Ozbolat, I. T., & Khoda, B. (2014) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4028418 · Cited by 28
Effect of Extrusion Temperature on Printable Threshold Overhang in Additive Manufacturing
Jiang, J., Xu, X. W., & Stringer, J. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.04.047 · Cited by 21
Self-citation
Cited by
Additive manufacturing of heat exchangers in aerospace applications: a review
Careri, F., Khan, R. H. U., Todd, C., & Attallah, M. M. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121387 · Cited by 320
Metadata
- Authors
- Jiang, J., & Ma, Y.
- Venue
- Micromachines
- Publisher
- MDPI AG
- Published
- 2020-06-28
- Volume
- 11
- Issue
- 7
- Pages
- 633
- ISSN
- 2072-666X (ISSN-L)
- OpenAlex
- W3037146998
- Cited by
- 279
- References
- 39
- FWCI
- 17.25
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.