CoChat

Production of Biosurfactant Produced from Used Cooking Oil by Bacillus sp. HIP3 for Heavy Metals Removal

Open access
Md Badrul Hisham, Nurul Hanisah, Ibrahim, Mohamad Faizal, Ramli, Norhayati, Abd-Aziz, Suraini · 2019 · Molecules

The DOI matches its Crossref record; 60 of the 62 references it cites were found in a registry or an index.

Abstract

Heavy metals from industrial effluents and sewage contribute to serious water pollution in most developing countries. The constant penetration and contamination of heavy metals into natural water sources may substantially raise the chances of human exposure to these metals through ingestion, inhalation, or skin contact, which could lead to liver damage, cancer, and other severe conditions in the long term. Biosurfactant as an efficient biological surface-active agent may provide an alternative solution for the removal of heavy metals from industrial wastes. Biosurfactants exhibit the properties of reducing surface and interfacial tension, stabilizing emulsions, promoting foaming, high selectivity, and specific activity at extreme temperatures, pH, and salinity, and the ability to be synthesized from renewable resources. This study aimed to produce biosurfactant from renewable feedstock, which is used cooking oil (UCO), by a local isolate, namely Bacillus sp. HIP3 for heavy metals removal. Bacillus sp. HIP3 is a Gram-positive isolate that gave the highest oil displacement area with the lowest surface tension, of 38 mN/m, after 7 days of culturing in mineral salt medium and 2% (v/v) UCO at a temperature of 30 °C and under agitation at 200 rpm. An extraction method, using chloroform:methanol (2:1) as the solvents, gave the highest biosurfactant yield, which was 9.5 g/L. High performance liquid chromatography (HPLC) analysis confirmed that the biosurfactant produced by Bacillus sp. HIP3 consists of a lipopeptide similar to standard surfactin. The biosurfactant was capable of removing 13.57%, 12.71%, 2.91%, 1.68%, and 0.7% of copper, lead, zinc, chromium, and cadmium, respectively, from artificially contaminated water, highlighting its potential for bioremediation.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/molecules24142617

Cites

60 of 60 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Evolutionary relationships of taxa of isolate (a) HIP1, (b) HIP2, (c) HIP3, and (d) HIO1. The evolutionary history was inferred using the neighbor-joining method. The percentage of replicate trees in which the associated taxa clustered together in the bootstrap test (100 replicates) is shown next to the branches. The tree is drawn to scale, with branch lengths in the same units as those of the evolutionary distances used to infer the phylogenetic tree. The evolutionary distances were computed using the Maximum Composite Likelihood method and are in the units of the number of base substitutions per site. The analysis involved 37 nucleotide sequences. All positions containing gaps and missing data were eliminated. Evolutionary analyses were conducted in MEGA5.
Figure 1 Evolutionary relationships of taxa of isolate (a) HIP1, (b) HIP2, (c) HIP3, and (d) HIO1. The evolutionary history was inferred using the neighbor-joining method. The percentage of replicate trees in which the associated taxa clustered together in the bootstrap test (100 replicates) is shown next to the branches. The tree is drawn to scale, with branch lengths in the same units as those of the evolutionary distances used to infer the phylogenetic tree. The evolutionary distances were computed using the Maximum Composite Likelihood method and are in the units of the number of base substitutions per site. The analysis involved 37 nucleotide sequences. All positions containing gaps and missing data were eliminated. Evolutionary analyses were conducted in MEGA5.CC BY · PubMed Central
Figure 2 Cell biomass and surface activity profile of Bacillus sp. HIP3 when cultivated in MSM with 2% (v/v) UCO as a carbon source at 30 °C and 200 rpm for biosurfactant production.
Figure 2 Cell biomass and surface activity profile of Bacillus sp. HIP3 when cultivated in MSM with 2% (v/v) UCO as a carbon source at 30 °C and 200 rpm for biosurfactant production.CC BY · PubMed Central
Figure 3 High performance liquid chromatography chromatograms of the biosurfactant produced by (a) Bacillus sp. HIP3 and (b) the standard Surfactin (Sigma-Aldrich, USA).
Figure 3 High performance liquid chromatography chromatograms of the biosurfactant produced by (a) Bacillus sp. HIP3 and (b) the standard Surfactin (Sigma-Aldrich, USA).CC BY · PubMed Central
Figure 4 Heavy metals removal using surfactin produced from Bacillus sp. HIP3 after treatment for 24 h.
Figure 4 Heavy metals removal using surfactin produced from Bacillus sp. HIP3 after treatment for 24 h.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 60 references

Research works printed but not linked: 2

  1. Pandey, 2013, Optimization and characterization of biosurfactant producing microbes isolated from oil contaminated soil and expression of biosurfactant genes in E.coli, Int. J. Pharm. Res. Bio-Sci., 2, 46
  2. Mohammed, A.S., Kapri, A., and Goel, R. (2011). Use of Biosurfactants in the Removal of Heavy Metal Ions from Soils, Springer.

Cited by

See all 146

Metadata

Authors
Md Badrul Hisham, N. H., Ibrahim, M. F., Ramli, N., & Abd-Aziz, S.
Affiliations
  • Department of Bioprocess Technology, Faculty of Biotechnology and Biomolecular Sciences, Universiti Putra Malaysia, 43400 UPM Serdang, Malaysia
  • Universiti Putra Malaysia (MY)
Venue
Molecules
Publisher
MDPI AG
Published
2019-07-18
Volume
24
Issue
14
Pages
2617
ISSN
1420-3049 (ISSN-L)
OpenAlex
W2958061494
Cited by
129
References
62
Citations by year
2026: 13 · 2025: 13 · 2024: 26 · 2023: 19 · 2022: 25 · 2021: 26 · 2020: 7
FWCI
4.34
Type
journal article
Language
en
Open access
Locations
  • Molecules (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia) (acceptedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Ministry of Higher Education, Malaysia (FRGS 2014-2)
Topics
  • Physical Sciences › Environmental Science › Pollution › Microbial bioremediation and biosurfactants
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Surfactants and Colloidal Systems
  • Physical Sciences › Environmental Science › Environmental Chemistry › Environmental Chemistry and Analysis
Keywords
biosurfactant production, waste cooking oil, heavy metal removal, lipopeptide biosurfactant, surfactin, copper, lead, zinc, chromium, cadmium, bioremediation, water pollution, surface tension, chloroform-methanol extraction, industrial wastewater
MeSH terms
Adsorption, Bacillus, Bacterial Proteins, Biodegradation, Environmental, Dietary Fats, Unsaturated, Phylogeny, Surface-Active Agents, Metals, Heavy

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Production of Biosurfactant Produced from Used Cooking Oil by Bacillus sp. HIP3 for Heavy Metals Removal. https://app.cochat.ai/papers/10.3390/molecules24142617
The paper
Md Badrul Hisham, N. H., Ibrahim, M. F., Ramli, N., & Abd-Aziz, S. (2019). Production of Biosurfactant Produced from Used Cooking Oil by Bacillus sp. HIP3 for Heavy Metals Removal. Molecules. https://doi.org/10.3390/molecules24142617

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.