Thermal Decomposition Study on Li2O2 for Li2NiO2 Synthesis as a Sacrificing Positive Additive of Lithium-Ion Batteries
Open accessThe DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index; none of the 11 sources its claims cite is checked for support yet.
Abstract
Herein, thermal decomposition experiments of lithium peroxide (Li2O2) were performed to prepare a precursor (Li2O) for sacrificing cathode material, Li2NiO2. The Li2O2 was prepared by a hydrometallurgical reaction between LiOH·H2O and H2O2. The overall reaction during annealing was found to involve the following three steps: (1) dehydration of LiOH·H2O, (2) decomposition of Li2O2, and (3) pyrolysis of the remaining anhydrous LiOH. This stepwise reaction was elucidated by thermal gravimetric and quantitative X-ray diffraction analyses. Furthermore, over-lithiated lithium nickel oxide (Li2NiO2) using our lithium precursor was synthesized, which exhibited a larger yield of 90.9% and higher irreversible capacity of 261 to 265 mAh g−1 than the sample prepared by commercially purchased Li2O (45.6% and 177 to 185 mAh g−1, respectively) due to optimal powder preparation conditions.
Overview
CoChat Summary
TL;DR
Thermal decomposition of Li₂O₂ to Li₂O proceeds through dehydration of LiOH·H₂O, decomposition of Li₂O₂, and pyrolysis of residual anhydrous LiOH. Li₂NiO₂ made from the prepared Li₂O gave higher yield and first-cycle irreversible capacity than Li₂NiO₂ made from commercial Li₂O.
Key findings
- Annealing Li₂O₂ involves three steps: dehydration of LiOH·H₂O at 90–200 °C, Li₂O₂ decomposition starting at 340 °C and ending at 420 °C, and pyrolysis of anhydrous LiOH giving a broad signal between 420 and 550 °C.
- Li₂O₂ reacted thoroughly after 60 min at 400 °C; hydroxides were not found after reaction at 500 °C, and Li₂O content increased with thermal exposure time.
- Li₂NiO₂ synthesized from prepared Li₂O (P-L2N) had 90.9% L2N yield and 261–265 mAh g⁻¹ first-cycle irreversible capacity, versus 45.6% and 177–185 mAh g⁻¹ for Li₂NiO₂ from commercial Li₂O (C-L2N).
Methods
- Li₂O₂ was prepared by precipitation from LiOH·H₂O in 30% H₂O₂, stirred 1 h, filtered, and vacuum dried. Thermal decomposition used 10 g Li₂O₂ in an alumina crucible under N₂ flow, 5 °C/min ramp, 350–600 °C, and 30–120 min exposure.
- Li₂NiO₂ was synthesized by solid-state reaction of stoichiometric NiO and Li₂O at 650 °C for 12 h under N₂, using either prepared or commercial Li₂O. Characterization included FE-SEM, XRD with Rietveld refinement, and TGA/DTG.
- Electrochemical testing used 2032 coin half-cells with L2N working electrode, Li foil counter electrode, 1.0 M LiPF₆ in EC/EMC (1:2 v/v), and CCCV cycling between 3.0–4.25 V vs. Li/Li⁺ at 0.1 C, with three cells per material.
Limitations
- Stated: comparison of anhydrous LiOH pyrolysis with prior work needs verification because that prior result used vacuum annealing, whereas this study used an N₂ atmosphere.
- Stated: Li₂O₂ prepared by the hydrometallurgical reaction can be contaminated with LiOH·H₂O or anhydrous LiOH during vacuum drying, and the text says this contamination is inevitable.
- Evident: both L2N samples showed residual NiO and Li₂O signals, and P-L2N appeared more sintered than C-L2N; the text also reports Li₂O decomposition for L2N synthesis as 450 °C for 10 h in Results but 450 °C for 2 h in Methods.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures




Verification
Claims the paper makes
0 Valid · 0 Not valid · 8 Not checked · 26 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“On the other hand, the Li2O2 reacted thoroughly after 60 min at 400 °C to form the other Li compounds.”
§ Thermal Decomposition Study on Li2O2 for Li2NiO2 Synthesis as a Sacrificing Positive Additive of Lithium-Ion Batteries > 2. Results and Discussion
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Even if the quantity of Li hydroxides deviates, however, it is noteworthy that they were not found after the reaction at 500 °C, as expected from the TGA and DTG results.”
§ Thermal Decomposition Study on Li2O2 for Li2NiO2 Synthesis as a Sacrificing Positive Additive of Lithium-Ion Batteries > 2. Results and Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The overall reaction during annealing was found to involve the following three steps: (1) dehydration of LiOH·H2O, (2) decomposition of Li2O2, and (3) pyrolysis of the remaining anhydrous LiOH.”
- Also stated in: § 2. Results and Discussion · plain
“The full reaction consists of the following three steps: (1) dehydration of LiOH·H2O, (2) decomposition of Li2O2, and (3) pyrolysis of anhydrous LiOH, as indicated by arrows in the plot.”
- Also stated in: § 4. Conclusions · plain
“The full reaction during annealing was found to involve the following steps: (1) dehydration of LiOH·H2O, (2) decomposition of Li2O2 and (3) pyrolysis of the remaining anhydrous LiOH.”
§ Thermal Decomposition Study on Li2O2 for Li2NiO2 Synthesis as a Sacrificing Positive Additive of Lithium-Ion Batteries > Abstract
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 2. Results and Discussion · plain
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Moreover, spherical NiO particles are more abundant in the SEM image of the C-L2N presented in Figure S1b.”
§ Thermal Decomposition Study on Li2O2 for Li2NiO2 Synthesis as a Sacrificing Positive Additive of Lithium-Ion Batteries > 2. Results and Discussion
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“It appears that more sintered particles are found in the P-L2N compound than in the C-L2N.”
§ Thermal Decomposition Study on Li2O2 for Li2NiO2 Synthesis as a Sacrificing Positive Additive of Lithium-Ion Batteries > 2. Results and Discussion
hedgedstates an associationn = 2- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
12 more claims
Create a free account to see all 34 claims and to verify the 11 references still open.
- It may state two separate claims as one. 12
- The quote only partly states this claim. 2
- Probably not a substantial claim. 6
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ Thermal Decomposition Study on Li2O2 for Li2NiO2 Synthesis as a Sacrificing Positive Additive of Lithium-Ion Batteries > 2. Results and Discussion
“To estimate the performance of the prepared Li2O (decomposed at 450 °C for 10 h under N2 flow) as a precursor of the L2N sacrificing additive material of a LIB cathode”
§ Thermal Decomposition Study on Li2O2 for Li2NiO2 Synthesis as a Sacrificing Positive Additive of Lithium-Ion Batteries > 3. Materials and Methods > 3.3. Preparation of the L2N
“For this synthesis, we decomposed the Li2O2 at 450 °C for 2 h.”
Citations
Cites
Filming mechanism of lithium-carbon anodes in organic and inorganic electrolytes
Besenhard, J. O., Winter, M., Yang, J., & Biberacher, W. (1995) · Journal of Power Sources · doi:10.1016/0378-7753(94)02073-c · Cited by 619
Lithium-Ion Batteries: Science and Technologies
(2009) · Springer eBooks · doi:10.1007/978-0-387-34445-4 · Cited by 594
Aurbach, D., Zaban, A., Ein-Eli, Y., Weissman, I., Chusid, O., Markovsky, B., Levi, M., Levi, E., Schechter, A., & Granot, E. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02575-5 · Cited by 502
An Advanced Tool for the Selection of Electrolyte Components for Rechargeable Lithium Batteries
Peled, E., Golodnitsky, D., Menachem, C., & Bar‐Tow, D. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838831 · Cited by 249
Kim, T., Park, S., & Oh, S. M. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2790282 · Cited by 216
Air stable Al2O3-coated Li2NiO2 cathode additive as a surplus current consumer in a Li-ion cell
Kim, M. G., & Cho, J. (2008) · Journal of Materials Chemistry · doi:10.1039/b814161d · Cited by 117
Beyer, H., Meini, S., Tsiouvaras, N., Piana, M., & Gasteiger, H. A. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51056e · Cited by 114
Li2NiO2 as a sacrificing positive additive for lithium-ion batteries
Park, H., Yoon, T., Kim, Y.-U., Ryu, J. H., & Oh, S. M. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.117 · Cited by 102
Li2NiO2 as a Novel Cathode Additive for Overdischarge Protection of Li-Ion Batteries
Lee, H., Chang, S.-K., Goh, E.-Y., Jeong, J.-Y., Lee, J. H., Kim, H.-J., Cho, J.-J., & Hong, S.-T. (2008) · Chemistry of Materials · doi:10.1021/cm702290p · Cited by 92
Synthesis, Electrochemical Properties, and Phase Stability of Li2NiO2 with the Immm Structure
Kang, K., Chen, C.-H., Hwang, B. J., & Ceder, G. (2004) · Chemistry of Materials · doi:10.1021/cm049922h · Cited by 88
Research works printed but not linked: 3
- Moeller, T. (2009). Inorganic Syntheses, McGraw Hill Book Company, Inc.
- Hart, W.A., Beumel, O., and Whaley, T.P. (2013). The Chemistry of Lithium, Sodium, Potassium, Rubidium, Cesium and Francium: Pergamon Texts in Inorganic Chemistry, Elsevier.
- Lewis, R.A. (2016). Hawley’s Condensed Chemical Dictionary, John Wiley & Sons.
Cited by
Challenges of prelithiation strategies for next generation high energy lithium-ion batteries
Min, X., Xu, G., Xie, B., Guan, P., Sun, M., & Cui, G. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.02.005 · Cited by 186
Prelithiation: A Critical Strategy Towards Practical Application of High‐Energy‐Density Batteries
Zhang, H., Cheng, J., Liu, H., Li, D., Zeng, Z., Li, Y., Ji, F., Guo, Y., Wei, Y., Zhang, S., et al. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300466 · Cited by 117
Practical evaluation of prelithiation strategies for next‐generation lithium‐ion batteries
Chen, S., Wang, Z., Zhang, M., Shi, X., Wang, L., An, W., Li, Z., Pan, F., & Yang, L. (2023) · Carbon Energy · doi:10.1002/cey2.323 · Cited by 92
Su, K., Wang, Y., Yang, B., Zhang, X., Wu, W., Lang, J., & Yan, X. (2022) · Energy & environment materials · doi:10.1002/eem2.12506 · Cited by 58
Hofmann, M., Kapuschinski, M., Guntow, U., & Giffin, G. A. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abc6ca · Cited by 47
Metadata
- Authors
- Kim, J., Kang, H., Hwang, K., & Yoon, S.
- Affiliations
- Department of Nanomaterials Science and Engineering, School of Integrative Engineering, Chung-Ang University, 84, Heukseok-ro, Dongjak-Gu, Seoul 06974, Korea
- Chung-Ang University (KR)
- Corresponding author
- Yoon, Songhun
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2019-12-17
- Volume
- 24
- Issue
- 24
- Pages
- 4624
- ISSN
- 1420-3049 (ISSN-L)
- PMC
- PMC6943730
- OpenAlex
- W2996623440
- Cited by
- 21
- References
- 22
- Citations by year
- 2026: 5 · 2023: 6 · 2022: 7 · 2021: 1 · 2020: 2
- FWCI
- 0.90
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Molecules (publishedVersion, cc-by)
- PubMed (publishedVersion)
- PubMed Central (publishedVersion, cc-by)
- Funders
- Chung-Ang University
- Ministry of Trade, Industry and Energy (20006777)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Keywords
- lithium peroxide, thermal decomposition, lithium-ion batteries, lithium hydroxide, hydrogen peroxide, annealing, irreversible capacity
- MeSH terms
- Ions, Lithium, Nickel, Electric Power Supplies, X-Ray Diffraction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-11-20, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-11-20 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal Decomposition Study on Li2O2 for Li2NiO2 Synthesis as a Sacrificing Positive Additive of Lithium-Ion Batteries. https://app.cochat.ai/papers/10.3390/molecules24244624
- The paper
- Kim, J., Kang, H., Hwang, K., & Yoon, S. (2019). Thermal Decomposition Study on Li2O2 for Li2NiO2 Synthesis as a Sacrificing Positive Additive of Lithium-Ion Batteries. Molecules. https://doi.org/10.3390/molecules24244624
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.