Valorization of Byproducts of Hemp Multipurpose Crop: Short Non-Aligned Bast Fibers as a Source of Nanocellulose
Open accessThe DOI matches its Crossref record; 67 of the 68 references it cites were found in a registry or an index.
Abstract
Nanocellulose was extracted from short bast fibers, from hemp (Cannabis sativa L.) plants harvested at seed maturity, non-retted, and mechanically decorticated in a defibering apparatus, giving non-aligned fibers. A chemical pretreatment with NaOH and HCl allowed the removal of most of the non-cellulosic components of the fibers. No bleaching was performed. The chemically pretreated fibers were then refined in a beater and treated with a cellulase enzyme, followed by mechanical defibrillation in an ultrafine friction grinder. The fibers were characterized by microscopy, infrared spectroscopy, thermogravimetric analysis and X-ray diffraction after each step of the process to understand the evolution of their morphology and composition. The obtained nanocellulose suspension was composed of short nanofibrils with widths of 5–12 nm, stacks of nanofibrils with widths of 20–200 nm, and some larger fibers. The crystallinity index was found to increase from 74% for the raw fibers to 80% for the nanocellulose. The nanocellulose retained a yellowish color, indicating the presence of some residual lignin. The properties of the nanopaper prepared with the hemp nanocellulose were similar to those of nanopapers prepared with wood pulp-derived rod-like nanofibrils.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures













Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Bast fibers have a multicellular and hierarchical structure containing roughly 61% − 69% cellulose, compared to 40% − 48% in hurds fibers”
From Cannabis sativa L. biomass valorization as a strategic bioresource for South Africa’s circular bioeconomy: integrating biorefinery pathways and green extraction (2026) · cites this paper as [39]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Segal, L., Creely, J. J., Martin, A. E., & Conrad, C. M. (1959) · Textile Research Journal · doi:10.1177/004051755902901003 · Cited by 8,613 · cited 1×
“allow rapid comparison of fiber samples, the crystallinity index (CI) was calculated according to Segal equation (Segal et al., 2016): CI = 100 × (I200 − Iam) I200 ⁄ (1) where I200 is the height of the 200 peak and Iam the height of the minimum diffraction intensity between the 200 and the 110 peaks.”
MethodPark, S., Baker, J. O., Himmel, M. E., Parilla, P. A., & Johnson, D. K. (2010) · Biotechnology for Biofuels · doi:10.1186/1754-6834-3-10 · Cited by 3,395 · cited 1×
“This method is useful for comparing the relative differences between samples (Park et al., 2010).”
MethodIdealized powder diffraction patterns for cellulose polymorphs
French, A. D. (2014) · Cellulose · doi:10.1007/s10570-013-0030-4 · Cited by 3,247 · cited 2×
“While the shoulder around 20◦ that appeared in the diffractograms of all fiber samples after the first alkali pretreatment may correspond to the superposition of a weak (110) reflection of cellulose II and of (012) and (102) reflections of cellulose Iβ appearing in randomly oriented samples [55,58], a very weak peak a…”
BackgroundHydrogen Peroxide Synthesis: An Outlook beyond the Anthraquinone Process
Campos‐Martin, J. M., Blanco‐Brieva, G., & Fierro, J. L. G. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503779 · Cited by 3,238 · cited 1×
“The sustainability of the current H2O2 production process is also under scrutiny [33].”
BackgroundProduction of cellulose nanofibrils: A review of recent advances
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.016 · Cited by 1,687 · cited 1×
“, primary or secondary bast fibers, or shives [6,18–20]; the lignin content is lower than in wood, particularly in the bast fibers, allowing for milder fiber delignification and purification processes [21,22].”
BackgroundSelf-citationCellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499 · cited 1×
“and the like, has a monoclinic unit cell, containing two parallel cellulose chains (French, 2014; Hult et al., 2003; O’Sullivan, 1997).”
BackgroundEffects of short-time vibratory ball milling on the shape of FT-IR spectra of wood and cellulose
Schwanninger, M., Rodrigues, J. C., Pereira, H., & Hinterstoisser, B. (2004) · Vibrational Spectroscopy · doi:10.1016/j.vibspec.2004.02.003 · Cited by 1,368 · cited 1×
“, 2010) 3280 O6-H6⋯O3 intermolecular hydrogen bond in cellulose Iβ (Boukir et al., 2019; Popescu et al., 2016; Schwanninger et al., 2004) 2917, 2849 C-H stretching of aliphatic methylene groups of fatty acids (Boeriu et al.”
BackgroundBestimmung der Größe und der inneren Struktur von Kolloidteilchen mittels Röntgenstrahlen
Scherrer, P. (1918) · Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen, Mathematisch-Physikalische Klasse · Cited by 1,193
Tejado, A., Peña, C., Labidi, J., Echeverria, J. M., & Mondragon, I. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2006.05.042 · Cited by 1,112 · cited 1×
“3700–3000 O–H stretching of hydroxyl groups in polysaccharides (cellulose and hemicellulose) [45] 33 0 lence vibration of hydrogen bonded O–H [46] 3280 O6- 6· · ·O3 inter olecular hydrogen bond in cellulose Iβ [47–49] 2917, 2849 C–H stretching of aliphatic methylene groups of fatty acids [21,50] 2895 C–H symmetrical s…”
Characterisation of structure-dependent functional properties of lignin with infrared spectroscopy
Boeriu, C. G., Bravo, D., Gosselink, R. J. A., & van Dam, J. E. G. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.04.022 · Cited by 1,002 · cited 1×
“3700–3000 O–H stretching of hydroxyl groups in polysaccharides (cellulose and hemicellulose) [45] 33 0 lence vibration of hydrogen bonded O–H [46] 3280 O6- 6· · ·O3 inter olecular hydrogen bond in cellulose Iβ [47–49] 2917, 2849 C–H stretching of aliphatic methylene groups of fatty acids [21,50] 2895 C–H symmetrical s…”
Research works printed but not linked: 1
- Dalle Vacche S. Karunakaran V. Patrucco A. Zoccola M. Douard L. Ronchetti S.M. Gallo M. Bras J. Beneventi D. Research data: Preparation of nanocellulose using non-aligned hemp bast fibers, Version 2 Zenodo 2021 10.5281/zenodo.4715737 PMC8400396 34443315 · doi:10.5281/zenodo.4715737
Cited by
Frazier, R., Vivas, K. A., Azuaje, I., Vera, R. E., Pifano, A., Forfora, N., Jameel, H., Ford, E., Pawlak, J. J., Venditti, R. A., et al. (2024) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2024.01.001 · Cited by 66
Knowledge mapping for a secure and sustainable hemp industry: A systematic literature review
Aryal, K., Maraseni, T., Kretzschmar, T., Chang, D., Naebe, M., Neary, L., & Ash, G. J. (2023) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2023.100550 · Cited by 42
Das, R., Lindström, T., Khan, M., Rezaei, M., & Hsiao, B. S. (2023) · BioResources · doi:10.15376/biores.19.1.das · Cited by 45
Barbosa, F., Garrudo, F. F. F., Marques, A. C., Cabral, J. M. S., Morgado, J., Ferreira, F. C., & Silva, J. C. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms241713203 · Cited by 21
Biochemical preparation of hydrophobic and lipophilic nanocellulose from hemp stalk
Zhang, X., Guo, J., Liu, Y., Hao, X., Ji, X., & Yang, Q. (2022) · Materials Today Chemistry · doi:10.1016/j.mtchem.2022.101346 · Cited by 22
Valorization of cannabis green waste to cellulose nanomaterials via phosphoric acid hydrolysis
Hancock, J., Osei-Bonsu, R., Hoque, M., Samuels, L., & Foster, E. J. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.116888 · Cited by 14
Wossine, S. E., Ganesh, T., & Tufa, H. B. (2023) · Journal of Natural Fibers · doi:10.1080/15440478.2023.2229518 · Cited by 12
“The crystallinity index is increased after alkali treatment and bleaching in both Jenfokie and Doby fibers, this is most probably due to the removal of amorphous materials such as waxes, lignin, and hemicellulose (Dalle et al. 2021).”
BackgroundHemp Stem Epidermis and Cuticle: From Waste to Starter in Bio-Based Material Development
Pecoraro, M. T., Mellinas, C., Piccolella, S., Garrigós, M. C., & Pacifico, S. (2022) · Polymers · doi:10.3390/polym14142816 · Cited by 13
“As it can be seen, HC appeared as isolated fibrils with a rod-like structure and an average diameter of 15 μm, suggesting that cementing wax, hemicellulose, and lignin were almost removed during the extraction procedure [35,36].”
BackgroundEustress and Plants: A Synthesis with Prospects for Cannabis sativa Cultivation
Berni, R., Thiry, M., Hausman, J.-F., Lutts, S., & Guerriero, G. (2024) · Horticulturae · doi:10.3390/horticulturae10020127 · Cited by 11
Górski, K. M., Kowalczyk, T., Gładyś, A., Glica, M., Muskała, M., Picot, L., Mori, M., Hatziantoniou, S., & Sitarek, P. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.120566 · Cited by 11
Castaño, M. A., Arango, J. P. B., Galeano, F. J. C., & Ocampo, G. T. (2025) · Journal of Cannabis Research · doi:10.1186/s42238-025-00350-3 · Cited by 7
“The leaves, on the other hand, are used to extract fibers used in the production of paper, textiles, bioplastics, and construction materials, demonstrating their potential as a sustainable resource for various industrial markets (Dalle Vacche et al. 2021; Chatzimitakos et al. 2024).”
Haque, A. N. M. A., Vanniappan, G., Bayattork, M., Zhang, Y., & Naebe, M. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c11965 · Cited by 4
Conformational regulation and aggregation structure evolution during cellulose regeneration process
Zhang, Q., Ding, Z., Li, Y., Wang, X., & Huang, J. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124332 · Cited by 3
Lendewig, M., Forfora, N., Márquez, R., Enriquez-Medina, I., Franco, J., Cordoba, Y., Urdaneta, F., Morizet-Davis, J., Frazier, R., Pawlak, J. J., et al. (2026) · Progress in Materials Science · doi:10.1016/j.pmatsci.2026.101731 · Cited by 4
Production of nanocellulose from lignocellulosic biomass and its potential applications: A review
Khan, M. N., Sharif, A., Farooqi, Z. H., Rehman, N., Ahmed, E., Din, M. I., Tariq, M., Iqbal, R., Basuliman, O. A., Ali, I., et al. (2024) · Global NEST Journal · doi:10.30955/gnj.005604 · Cited by 10
“In plant sources, wood pulp and cotton fibers are the primary sources of cellulose and can be processed to extract cellulose on a commercial scale (Dalle Vacche et al .”
Physical Modification of Bast Fibre Surface and Their Effects
Ramesh, M., Maniraj, J., Kumar, S. G., & Sahayaraj, A. F. (2022) · Springer series on polymer and composite materials · doi:10.1007/978-981-19-4866-4_4 · Cited by 3
Experimental study with RSM optimisation for methylene blue removal using an ecological approach
Benamar, K., Bourachdi, S. E., Lahkimi, A., Koraichi, S. I., & Fikri-Benbrahim, K. (2025) · Chemistry and Ecology · doi:10.1080/02757540.2025.2474490 · Cited by 2
“The O-H stretching vibrations observed at 3318 cm –1 indicate the presence of alcohol and phenol groups, which are commonly associated with cellulose and lignin, acting as hydrogen bonding sites for methylene blue molecules [24].”
Vacche, S. D., Molina-Gutiérrez, S., Ferraro, G., Ladmiral, V., Caillol, S., Lacroix‐Desmazes, P., Leterrier, Y., & Bongiovanni, R. M. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c01365 · Cited by 2
Self-citationHemp Hurd/Medical PPE Composites: Enhancing Mechanical and Thermoplastic Characteristics
Ghosh, A. K. (2025) · Polymer Composites · doi:10.1002/pc.70080 · Cited by 3
“The peak at 2 θ ~ 22.4° is the major crystalline peak of the cellulose I structure [45, 46], which remained unchanged after thermo-mechanical grinding.”
InfluentialPreparation and Performance Study of Antibacterial Self‐Cleaning Cotton Fabrics
Sun, E., Li, H., Xu, L., & Wang, L. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.70149 · Cited by 1
Barbosa, R. A. D. A., Lyrio, E. S., Gouvêa-Silva, J. G., da Costa-Oliveira, C., Viana-Oliveira, L. D., Mazzola, P. G., do Vale, A. E., & Ramos, Y. J. (2026) · Cannabis and Cannabinoid Research · doi:10.1177/25785125261421439 · Cited by 2
Hage, M. E., Nouviaire, A., Espérance, D., Louka, N., Conforto, E., Maugard, T., Maache‐Rezzoug, Z., & Rezzoug, S.-A. (2026) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2026.110741 · Cited by 1
Abo, L. D., Yemane, T. H., Sivagurulingam, A. P. A., Prasad, N., Jayakumar, M., & Molla, N. (2026) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2026.109307 · Cited by 3
Unveiling Nanocellulose from the Perspective of Morphological Engineering
Zhang, Q., Ding, Z., Wang, X., & Huang, J. (2026) · Molecules · doi:10.3390/molecules31162743 · Cited by 1
“Enhancement is currently one of the most commonly used functions for CNCs [102].”
Motsa, L., Seedat, N., Mekuto, L., & Sekoai, P. (2026) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-026-07177-9
“Bast fibers have a multicellular and hierarchical structure containing roughly 61% − 69% cellulose, compared to 40% − 48% in hurds fibers, with the lower cellulose content in hurds resulting in a higher proportion of lignin and hemi-celluloses [ 39 ].”
Recent Advances in Functionalized Nanocellulose Materials in Nanobiotechnology
Rajesh, N., Vani, M. V., Khadri, H., Chandra, M. S., & Riazunnisa, K. (2025) · Smart nanomaterials technology · doi:10.1007/978-981-96-2171-2_1 · Cited by 1
Akkaya, G. K., Tosun, İ., & Erdal, İ. (2026) · Bioresource Technology Reports · doi:10.1016/j.biteb.2026.102899
Synthesis and Characterization of Orange-Peel-Modified Particleboards Glued with Tannin-Based Resins
Rosa, N., Cetera, P., Tsouri, F. Y., Moro, L., Colusso, E., Zanetti, M., Cordeiro, L. A., & Tondi, G. (2026) · Materials · doi:10.3390/ma19132858
“In addition, moderate thermal treatment may expose reactive functional groups and promote the formation of more stable aromatic or conjugated structures [33,34].”
Bharathy, K. P., Jayakumar, T., Banu, R., Uppuluri, K. B., & Rakesh, S. (2026) · Bioresource Technology Reports · doi:10.1016/j.biteb.2026.103054
Zeng, Y., Liu, R., Liao, K., Wu, K., Yu, H., & Lyu, Q. (2026) · Bioresource Technology Reports · doi:10.1016/j.biteb.2026.103069
Nepal, S., Mai, C., Lühr, C., & Gusovius, H. (2026) · Journal of Natural Fibers · doi:10.1080/15440478.2026.2697999
Fiber-Length Redistribution Simulation for Cut Long-Staple Fiber Slivers
Zhang, L., & Yin, R. (2026) · Fibers and Polymers · doi:10.1007/s12221-026-01590-7
Metadata
- Authors
- Dalle Vacche, S., Karunakaran, V., Patrucco, A., Zoccola, M., Douard, L., Ronchetti, S., Gallo, M., Schreier, A., Leterrier, Y., Bras, J., Beneventi, D., & Bongiovanni, R.
- Affiliations
- Politecnico di Torino, Department of Applied Science and Technology, Corso Duca degli Abruzzi 24, 10129 Turin, Italy
- Politecnico di Torino (IT)
- National Research Council (IT)
- Institut polytechnique de Grenoble (FR)
- École Polytechnique Fédérale de Lausanne (CH)
- ORCID
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2021-08-04
- Volume
- 26
- Issue
- 16
- Pages
- 4723
- ISSN
- 1420-3049 (ISSN-L)
- PMC
- PMC8400396
- OpenAlex
- W3189602721
- Cited by
- 32
- References
- 68
- Citations by year
- 2026: 12 · 2025: 8 · 2024: 4 · 2023: 5 · 2022: 3
- FWCI
- 0.78
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Molecules (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- PORTO@Iris (submittedVersion, cc-by)
- HAL (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Funders
- H2020 Marie Skłodowska-Curie Actions (789454)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- hemp, nanocellulose, chemical pretreatment, cellulase treatment, mechanical defibrillation, nanofibrils, crystallinity, residual lignin, nanopaper
- MeSH terms
- Cannabis, Cellulose, Particle Size, Solvents, Temperature, Thermogravimetry, X-Ray Diffraction, Spectroscopy, Fourier Transform Infrared, Crops, Agricultural, Nanoparticles
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.