The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
A Review of the Effect of Plasticizers on the Physical and Mechanical Properties of Alginate-Based Films
Open accessAbstract
In recent years, there has been a growing attempt to manipulate various properties of biodegradable materials to use them as alternatives to their synthetic plastic counterparts. Alginate is a polysaccharide extracted from seaweed or soil bacteria that is considered one of the most promising materials for numerous applications. However, alginate potential for various applications is relatively limited due to brittleness, poor mechanical properties, scaling-up difficulties, and high water vapor permeability (WVP). Choosing an appropriate plasticizer can alleviate the situation by providing higher flexibility, workability, processability, and in some cases, higher hydrophobicity. This review paper discusses the main results and developments regarding the effects of various plasticizers on the properties of alginate-based films during the last decades. The plasticizers used for plasticizing alginate were classified into different categories, and their behavior under different concentrations and conditions was studied. Moreover, the drawback effects of plasticizers on the mechanical properties and WVP of the films are discussed. Finally, the role of plasticizers in the improved processing of alginate and the lack of knowledge on some aspects of plasticized alginate films is clarified, and accordingly, some recommendations for more classical studies of the plasticized alginate films in the future are offered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Williams, M. L., Landel, R. F., & Ferry, J. D. (1955) · Journal of the American Chemical Society · doi:10.1021/ja01619a008 · Cited by 8,083
Fox, T. G., & Flory, P. J. (1950) · Journal of Applied Physics · doi:10.1063/1.1699711 · Cited by 2,424
Natural-based plasticizers and biopolymer films: A review
Vieira, M. G. A., da Silva, M. A., dos Santos, L. O., & Beppu, M. M. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.12.011 · Cited by 1,992
Alginate derivatization: A review of chemistry, properties and applications
Pawar, S. N., & Edgar, K. J. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.007 · Cited by 1,627
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
Ethylene glycol: properties, synthesis, and applications
Yue, H., Zhao, Y., Ma, X., & Gong, J. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15359a · Cited by 1,180
Glycerol production and its applications as a raw material: A review
Tan, H. W., Abdul Aziz, A. R., & Aroua, M. K. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.06.035 · Cited by 719
McHugh, T. H., & Krochta, J. M. (1994) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf00040a001 · Cited by 688
Acevedo-Fani, A., Salvia-Trujillo, L., Rojas-Graü, M. A., & Martín-Belloso, O. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.01.032 · Cited by 651
Physical and mechanical properties of water resistant sodium alginate films
Rhim, J.-W. (2004) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2003.09.008 · Cited by 619
Abasalizadeh, F., Moghaddam, S. V., Alizadeh, E., akbari, E., Kashani, E., Fazljou, S. M. B., Torbati, M., & Akbarzadeh, A. (2020) · Journal of Biological Engineering · doi:10.1186/s13036-020-0227-7 · Cited by 608
Properties of thermoplastic blends: starch–polycaprolactone
Averous, L. (2000) · Polymer · doi:10.1016/s0032-3861(99)00636-9 · Cited by 566
Recent Advances on Edible Films Based on Fruits and Vegetables—A Review
Otoni, C. G., Avena‐Bustillos, R. J., Azeredo, H. M. C., Lorevice, M. V., Moura, M. R., Mattoso, L. H. C., & McHugh, T. H. (2017) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12281 · Cited by 559
Benavides, S., Villalobos-Carvajal, R., & Reyes, J. E. (2012) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.05.023 · Cited by 495
Physical and antibacte rial properties of alginate-based edible film incorporated with garlic oil
Pranoto, Y., Salokhe, V. M., & Rakshit, S. K. (2005) · Food Research International · doi:10.1016/j.foodres.2004.04.009 · Cited by 486
Petro‐based and bio‐based plasticizers: Chemical structures to plasticizing properties
Bocqué, M., Voirin, C., Lapinte, V., Caillol, S., & Robin, J. (2016) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.27917 · Cited by 469
Talja, R. A., Helén, H., Roos, Y. H., & Jouppila, K. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.05.019 · Cited by 444
Development and characterization of composite edible films based on sodium alginate and pectin
Galus, S., & Lenart, A. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2012.03.006 · Cited by 422
Levine, H., & Slade, L. (1991) · Advances in experimental medicine and biology · doi:10.1007/978-1-4899-0664-9 · Cited by 353
Olivas, G. I., & Barbosa‐Cánovas, G. V. (2007) · LWT · doi:10.1016/j.lwt.2007.02.015 · Cited by 350
Rojas-Graü, M. A., Avena-Bustillos, R. J., Olsen, C., Friedman, M., Henika, P. R., Martín-Belloso, O., Pan, Z., & McHugh, T. H. (2007) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2007.01.007 · Cited by 348
da Silva, M. A., Bierhalz, A. C. K., & Kieckbusch, T. G. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.02.014 · Cited by 340
Scaling up difficulties and commercial aspects of edible films for food packaging: A review
Jeya Jeevahan, J., Chandrasekaran, M., Venkatesan, S. P., Sriram, V., Britto Joseph, G., Mageshwaran, G., & Durairaj, R. B. (2020) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2020.04.014 · Cited by 334
Abourehab, M. A. S., Rajendran, R. R., Singh, A., Pramanik, S., Shrivastav, P., Ansari, M. J., Manne, R., Amaral, L. S., & Deepak, A. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23169035 · Cited by 317
Whey Protein Emulsion Film Performance as Affected by Lipid Type and Amount
SHELLHAMMER, T. H., & KROCHTA, J. M. (1997) · Journal of Food Science · doi:10.1111/j.1365-2621.1997.tb04008.x · Cited by 295
Gontard, N., Thibault, R., Cuq, B., et al. (1996) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf9504327 · Cited by 285
Green composite films prepared from cellulose, starch and lignin in room-temperature ionic liquid
Wu, R.-L., Wang, X.-L., Li, F., Li, H.-Z., & Wang, Y.-Z. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.11.044 · Cited by 278
Donhowe, I. G., & Fennema, O. R. (1993) · Journal of Food Processing and Preservation · doi:10.1111/j.1745-4549.1993.tb00729.x · Cited by 231
The role of water during plasticization of native starches
Hulleman, S. H. D., Janssen, F. H. P., & Feil, H. (1998) · Polymer · doi:10.1016/s0032-3861(97)00301-7 · Cited by 228
Structure and properties of glycerol-plasticized chitosan obtained by mechanical kneading
Epure, V., Griffon, M., Pollet, E., & Avérous, L. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.09.003 · Cited by 213
Jost, V., Kobsik, K., Schmid, M., & Noller, K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.096 · Cited by 193
Innovative thermoplastic chitosan obtained by thermo-mechanical mixing with polyol plasticizers
Matet, M., Heuzey, M.-C., Pollet, E., Ajji, A., & Avérous, L. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.052 · Cited by 172
Biobased alginate/castor oil edible films for active food packaging
Abdel Aziz, M. S., Salama, H. E., & Sabaa, M. W. (2018) · LWT · doi:10.1016/j.lwt.2018.05.049 · Cited by 168
Gheorghita, R. E., Gutt, G., & Amariei, S. (2020) · Coatings · doi:10.3390/coatings10020166 · Cited by 165
Giz, A. S., Berberoglu, M., Bener, S., Aydelik-Ayazoglu, S., Bayraktar, H., Alaca, B. E., & Çatalgil‐Giz, H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.103 · Cited by 160
Starch nano-biocomposites based on needle-like sepiolite clays
Chivrac, F., Pollet, É., Schmutz, M., & Avérous, L. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.11.004 · Cited by 149
Sodium alginate and its blends with starch: Thermal and morphological properties
Siddaramaiah, Swamy, T. M. M., Ramaraj, B., & Lee, J. H. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28625 · Cited by 139
Avella, M., Pace, E. D., Immirzi, B., Impallomeni, G., Malinconico, M., & Santagata, G. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.01.011 · Cited by 114
Montilla‐Buitrago, C. E., Gómez‐López, R. A., Solanilla‐Duque, J. F., Serna‐Cock, L., & Castillo, H. S. V. (2021) · Starch - Stärke · doi:10.1002/star.202100060 · Cited by 114
Edible wheat gluten (WG) protein films
Mojumdar, S. C., Moresoli, C., Simon, L. C., & Legge, R. L. (2011) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-011-1491-z · Cited by 113
Feng, L., Cao, Y., Xu, D., Wang, S., & Zhang, J. (2016) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2016.06.038 · Cited by 113
Alhanish, A., & Ghalia, M. A. (2021) · Biotechnology Progress · doi:10.1002/btpr.3210 · Cited by 103
Tong, Q., Xiao, Q., & Lim, L. (2012) · International Journal of Food Science & Technology · doi:10.1111/ijfs.12039 · Cited by 95
Biodegradable packaging and edible coating for fresh-cut fruits and vegetables
Galgano, F., Condelli, N., Caruso, M. C., Favati, F., Valentina, D. B., & Giuseppe, P. (2015) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.14674/1120-1770/ijfs.v70 · Cited by 93
Chen, H., Wu, C., Feng, X., He, M., Zhu, X., Li, Y., & Teng, F. (2022) · LWT · doi:10.1016/j.lwt.2022.113221 · Cited by 92
Vegetable wastes derived polysaccharides as natural eco-friendly plasticizers of sodium alginate
Donato, P. D., Taurisano, V., Poli, A., d’Ayala, G. G., Nicolaus, B., Malinconinco, M., & Santagata, G. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115427 · Cited by 91
Gao, C., Pollet, É., & Avérous, L. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.10.037 · Cited by 87
Frank, K., Garcia, C. V., Shin, G. H., & Kim, J. T. (2018) · International Journal of Polymer Science · doi:10.1155/2018/1519407 · Cited by 86
Thakhiew, W., Devahastin, S., & Soponronnarit, S. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.05.020 · Cited by 81
Preparation and Characterization of Blend Films of Poly(Vinyl Alcohol) and Sodium Alginate
Çaykara, T., & Demirci, S. (2006) · Journal of Macromolecular Science Part A · doi:10.1080/10601320600740389 · Cited by 77
Liu, L., Kerry, J. F., & Kerry, J. P. (2006) · Meat Science · doi:10.1016/j.meatsci.2006.07.008 · Cited by 68
Characterization of ‘wet’ alginate and composite films containing gelatin, whey or soy protein
Harper, B. A., Barbut, S., Lim, L., & Marcone, M. F. (2013) · Food Research International · doi:10.1016/j.foodres.2012.12.041 · Cited by 65
Russo, R., Abbate, M., Malinconico, M., & Santagata, G. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.06.037 · Cited by 62
Giannakas, A. E., Patsaoura, A., Barkoula, N. ‐., & Ladavos, A. K. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.10.020 · Cited by 61
Evaluation of physicochemical properties of film-based alginate for food packing applications
Castro-Yobal, M. A., Contreras‐Oliva, A., Saucedo-Rivalcoba, V., Rivera‐Armenta, J. L., Ramírez, G. H., Salinas‐Ruíz, J., & Herrera‐Corredor, J. A. (2021) · e-Polymers · doi:10.1515/epoly-2021-0011 · Cited by 58
Lagoa, R., & Rodrigues, J. R. (2007) · Applied Biochemistry and Biotechnology · doi:10.1007/s12010-007-0041-4 · Cited by 57
Industrial Applications of Marine Biopolymers
(2017) · CRC Press eBooks · doi:10.4324/9781315313535 · Cited by 53
Miri, N. E., Aziz, F., Aboulkas, A., Bοuchti, M. E., Youcef, H. B., & Achaby, M. E. (2018) · Advances in Polymer Technology · doi:10.1002/adv.22087 · Cited by 48
Characterization of Ecklonia cava Alginate Films Containing Cinnamon Essential Oils
Baek, S., Kim, S., & Song, K. B. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19113545 · Cited by 48
Munhoz, D. R., Moreira, F. K. V., Bresolin, J. D., Bernardo, M. P., de Sousa, C. P., & Mattoso, L. H. C. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01101 · Cited by 45
Russo, R., Giuliani, A., Immirzi, B., Malinconico, M., & Romano, G. (2004) · Macromolecular Symposia · doi:10.1002/masy.200451425 · Cited by 41
Title: A Review on Plasticizers and Eco-Friendly Bioplasticizers: Biomass Sources and Market
Saabome, S. M. (2020) · International Journal of Engineering Research and · doi:10.17577/ijertv9is050788 · Cited by 40
Işıklan, N., Baysak, F. K., & İnal, M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30549 · Cited by 34
Chen, P., Xie, F., Tang, F., & McNally, T. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00433 · Cited by 32
Cited by
Molinari, G., Aliotta, L., Gigante, V., Gemmi, M., & Lazzeri, A. (2026) · Polymer International · doi:10.1002/pi.70187
Metadata
- Authors
- Eslami, Z., Elkoun, S., Robert, M., & Adjallé, K.
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2023-09-15
- Volume
- 28
- Issue
- 18
- Pages
- 6637
- ISSN
- 1420-3049 (ISSN-L)
- OpenAlex
- W4386781931
- Cited by
- 320
- References
- 64
- FWCI
- 17.62
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.