NePCM Based on Silver Dispersions in Poly(Ethylene Glycol) as a Stable Solution for Thermal Storage
Open accessThe DOI matches its Crossref record; 100 of the 102 references it cites were found in a registry or an index.
Abstract
The main objective of this study is to design and characterize silver suspensions based on poly(ethylene glycol) PEG400, Ag/PEG400, as energy storage media for low-temperature applications. A polyvinylpyrrolidone (PVP) treatment was applied to ~22 nm silver nanoparticles to ensure good stability in poly(ethylene glycol). An array of different experimental techniques was utilized to analyze the molecular mass and purity of base poly(ethylene glycol), morphology of dry PVP-capped Ag nanoparticles, hydrodynamic average size of dispersed Ag particles, as well as thermal stability of PEG400 and Ag/PEG400 dispersions. Samples exhibited good temporal stabilities with average hydrodynamic diameter around 50 nm according to dynamic light scattering analyses. Melting and solidification transitions were investigated in terms of temperature and enthalpy from differential scanning calorimeter (DSC) thermograms. The thermophysical characterization was completed with thermal conductivity (k), dynamic viscosity (η), isobaric heat capacity (Cp), density (ρ), and surface tension (σ) measurements of designed materials using a Hot Disk thermal conductivimeter, a rotational rheometer, a DSC calorimeter working with a quasi-isothermal modulated method, a U-tube densimeter and a drop shape analyzer, respectively. For a nanoparticle loading of only 1.1% in mass, sub-cooling reduced by 7.1% and thermal conductive improved by 3.9%, with almost no penalization in dynamic viscosity (less than 5.4% of increase). Maximum modifications in Cp, ρ, and σ were 0.9%, 2.2%, and 2.2%, respectively. Experimental results were compared with the values provided by using different theoretical or semi-empirical equations. In particular, good descriptions of dynamic viscosity as functions of temperature and nanoparticle volume concentration were obtained by using the Vogel–Fulcher–Tammann equation and a first-order polynomial η( ϕ v , n p ) correlation, with absolute average deviations of 2.2% and 0.55%, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








![Figure 9 Relative thermal conductivity, knf/kbf, as a function of volume fraction, ϕv,np, for Ag/PEG400 nanofluids at 313.15 K. (●) Experimental results obtained in this work and predicted values by (- - -) Maxwell [74] and (—) Murshed et al. [80] models.](https://figures.cochat.ai/paper-figures/7b3e58e65972447b850fd4c23a19460a/nepcm-based-on-silver-dispersions-in-poly-ethylene-glycol-as-a-stable-solution-figure-9.jpg)
![Figure 10 Temperature dependence of density (ρ) for: (×) base PEG400, (△) 0.10 wt%, (□) 0.50 wt%, and (◇) 1.1 wt% NePCMs. (—) Second-order polynomial fittings. Values reported for (+) PEG400 by Han et al. [88] and for (*) PEG600 by Trivedi, Bhanot and Pandey [86].](https://figures.cochat.ai/paper-figures/3442b208adfb4f2db5e07d27bd4b8b0b/nepcm-based-on-silver-dispersions-in-poly-ethylene-glycol-as-a-stable-solution-figure-10.jpg)



Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Thermal conductivity was improved up to 3.9% by the 1.1 wt % NPs.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [56]
The cited source says what the claim attributes to it.
In the citing paper
“Undesirable sub-cooling was also reduced with the addition of NPs [56].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [56]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A treatise on electricity and magnetism
(1954) · Journal of the Franklin Institute · doi:10.1016/0016-0032(54)90053-8 · Cited by 9,077
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936 · cited 1×
“PCMs or latent heat storage media are attracting particular attention due to the high energy storage density (5 to 14 times larger than with only sensible heat [3]) and fewer degradation/reversibility issues throughout a large number of cycles when compared to thermochemical approaches.”
BackgroundEine neue Bestimmung der Moleküldimensionen
Einstein, A. (1906) · Annalen der Physik · doi:10.1002/andp.19063240204 · Cited by 4,525 · cited 7×
“Figure 12 shows a graphical comparison between experimental relative viscosities and the values provided by the predictive Einstein (1906) equation or a linear (N = 1) correlation based on Equation (8).”
BackgroundMethodInfluentialFlash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal Conductivity
Parker, W. J., Jenkins, R. J., Butler, C. P., & Abbott, G. L. (1961) · Journal of Applied Physics · doi:10.1063/1.1728417 · Cited by 3,978 · cited 2×
“49 g·cm−3 corresponding to crystalline silver [52].”
BackgroundMourdikoudis, S., Pallares, R. M., & Thanh, N. T. K. (2018) · Nanoscale · doi:10.1039/c8nr02278j · Cited by 2,191 · cited 2×
“This electron freedom gives rise to a surface plasmon resonance (SPR) absorption band, which confers unique optical properties at certain wavelengths of light [53].”
BackgroundMethodPhase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889 · cited 2×
“In particular, the poly(ethylene glycol) with an average molecular mass of 400 g·mol−1, PEG400, used as based material in this work, has its melting transition at ~277 K, which is attractive for cold thermal energy storage [8,14].”
BackgroundRecent developments in phase change materials for energy storage applications: A review
Nazir, H., Batool, M., Bolivar Osorio, F. J., Isaza-Ruiz, M., Xu, X., Vignarooban, K., Phelan, P., Inamuddin, & Kannan, A. M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.126 · Cited by 1,522
Investigations of thermal conductivity and viscosity of nanofluids
Murshed, S. M. S., Leong, K. C., & Yang, C. (2008) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2007.05.004 · Cited by 1,152 · cited 2×
“[80] proposed a model that considers the size of dispersed particles but also suggests the existence of an interfacial layer in which thermal conductivity takes an intermediate value between those of the base fluid and nanoparticles.”
BackgroundThermal conductivity and particle agglomeration in alumina nanofluids: Experiment and theory
Timofeeva, E. V., Gavrilov, A. N., McCloskey, J. M., Tolmachev, Y. V., Sprunt, S., Lopatina, L. M., & Selinger, J. V. (2007) · Physical Review E · doi:10.1103/physreve.76.061203 · Cited by 784
Research works printed but not linked: 1
- Rodríguez-Pérez M. Reglero J. Lehmhus D. Wichmann M. De Saja J. Fernández A. The Transient Plane Source Technique (TPS) to Measure Thermal Conductivity and its Potential as A Tool to Detect In-Homogeneities in Metal Foams Proceedings of the International Conference “Advanced Metallic Materials” Smolenice, Slovakia 5–7 November 2003 253 257
Cited by
Improving solar cooker performance using phase change materials: A comprehensive review
Omara, A. A. M., Abuelnuor, A. A. A., Mohammed, H. A., Habibi, D., & Younis, O. (2020) · Solar Energy · doi:10.1016/j.solener.2020.07.015 · Cited by 128
Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review
Tofani, K., & Tiari, S. (2021) · Energies · doi:10.3390/en14133821 · Cited by 114
Bouzennada, T., Mechighel, F., Ismail, T., Kolsi, L., & Ghachem, K. (2021) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2021.105280 · Cited by 108
Micro- and nano-encapsulated metal and alloy-based phase-change materials for thermal energy storage
Zhu, S., Nguyen, M. T., & Yonezawa, T. (2021) · Nanoscale Advances · doi:10.1039/d0na01008a · Cited by 86
Cabaleiro, D., Hamze, S., Fal, J., Marcos, M. A., Estellé, P., & Żyła, G. (2020) · Nanomaterials · doi:10.3390/nano10061168 · Cited by 82
“[67,71,73] prepared and characterized NePCMs based on poly(ethylene glycol) 400 and containing functionalized graphene nanoplatelets [73], multi-walled carbon nanotubes [71] or silver nanoparticles [67].”
BackgroundMethodSelf-citationState of the Art in PEG-Based Heat Transfer Fluids and Their Suspensions with Nanoparticles
Minea, A. A. (2021) · Nanomaterials · doi:10.3390/nano11010086 · Cited by 68
Tawfik, M. A., Sagade, A. A., Palma-Behnke, R. E., Allah, W. E. A., & El-Shal, H. M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104432 · Cited by 62
Zeroual, S., Estellé, P., Cabaleiro, D., Vigolo, B., Emo, M., Halim, W., & Ouaskit, S. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.113229 · Cited by 57
Self-citationA review of phase change materials and heat enhancement methodologies
Saqib, M., & Andrzejczyk, R. (2022) · Wiley Interdisciplinary Reviews Energy and Environment · doi:10.1002/wene.467 · Cited by 54
Favaro, J. C., Detomini, T. R., Maia, L. P., Poli, R. C., Guiraldo, R. D., Lopes, M. B., & Berger, S. B. (2022) · International Journal of Dentistry · doi:10.1155/2022/9483589 · Cited by 49
“Silver nanoparticles coated with PVP dispersed in colloidal solution keep the nanoparticles in suspension and distant from each other [30].”
Ultra-Stable Carbon Quantum Dot Nanofluids for Direct Absorption Solar Collectors
Chen, X., Xiong, Z., Chen, M., & Zhou, P. (2021) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.111720 · Cited by 41
Bouzennada, T., Mechighel, F., Ghachem, K., & Kolsi, L. (2021) · Nanomaterials · doi:10.3390/nano11061425 · Cited by 38
“Investigators have suggested and applied several techniques such as adding high conductive fins [3,4] and nanoparticles into the PCM [5,6], where nanoparticles can be used to enhance heat distribution/dissipation due to their high thermal conductivities.”
MethodExperimental studies on several properties of PEG 400 and MWCNT nano-enhanced PEG 400 fluids
Cherecheş, M., Bejan, D., Cherecheş, E. I., & Minea, A. A. (2022) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2022.119049 · Cited by 36
Thermal conductivity of stabilized PEG 400 based nanofluids: An experimental approach
Cherecheş, M., Vărdaru, A., Huminic, G., Cherecheş, E. I., Minea, A. A., & Huminic, A. (2021) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2021.105798 · Cited by 30
Solar Cookers and Dryers: Environmental Sustainability and Nutraceutical Content in Food Processing
Battocchio, C., Bruni, F., Nicola, G. D., Gasperi, T., Iucci, G., Tofani, D., Varesano, A., & Venditti, I. (2021) · Foods · doi:10.3390/foods10102326 · Cited by 23
“In other words, PCM are materials whose phase change is used to store and release heat, and according to recent studies they are able to charge approximately 5 to 13 times more thermal energy per unit mass than materials in which only sensible heat is stored [46,47].”
BackgroundPEG 400-Based phase change materials Nano-Enhanced with Alumina: An experimental approach
Cherecheş, M., Ibănescu, C., Danu, M., Cherecheş, E. I., & Minea, A. A. (2021) · Alexandria Engineering Journal · doi:10.1016/j.aej.2021.12.029 · Cited by 23
Experimental optimization of various heat sinks using passive thermal management system
Zahid, I., Qamar, A., Farooq, M., Riaz, F., Habib, M. S., Farhan, M., Sultan, M. A., Rehman, A. U., & Hayat, M. A. (2023) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2023.103262 · Cited by 20
Polymer-dispersant-stabilized Ag nanofluids for heat transfer applications
Pavithra, K. S., Gurumurthy, S. C., Puttaiahgowda, Y. M., Mateti, T., Ramam, K., Nayak, R. P., & Murari, M. S. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-10064-8 · Cited by 20
Thermophysical, rheological and dielectric behaviour of stable carbon black dispersions in PEG200
Marcos, M. A., Fal, J., Vallejo, J. P., Żyła, G., & Lugo, L. (2023) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2023.123216 · Cited by 19
Self-citationJunaid, M., Saha, G., Shahrear, P., & Saha, S. C. (2024) · International Journal of Thermofluids · doi:10.1016/j.ijft.2024.100919 · Cited by 19
Cherecheş, M., Bejan, D., Ibănescu, C., Danu, M., Cherecheş, E. I., & Minea, A. A. (2022) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-021-11171-w · Cited by 15
“Nevertheless, ZnO, as nanoparticles, were not involved by now in any PEG-based nanofluids experimental studies, most of the considered nanoparticles being TiO2 [20], carbon-based (graphene and MWCNT) [21, 22, 24, 25], Ag [23], Fe2O3 [26].”
BackgroundPrado, J. I., Vallejo, J. P., & Lugo, L. (2021) · Powder Technology · doi:10.1016/j.powtec.2021.117082 · Cited by 14
Self-citationCherecheş, E. I., Bejan, D., & Minea, A. A. (2023) · Alexandria Engineering Journal · doi:10.1016/j.aej.2023.09.039 · Cited by 13
A comparative study on thermal behavior of PEG 400 and two oxide nanocolloids
Minea, A. A., & Cherecheş, E. I. (2024) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2024.102968 · Cited by 10
Maniglia, B. C., Arias, C. I. L. F., Siqueira, L. D. V., & TADINI, C. C. (2021) · Starch - Stärke · doi:10.1002/star.202100057 · Cited by 10
Ullah, S., Baloch, M. K., Nawaz, M., Rehman, Z. U., Rehman, W. U., Uddin, I., & Khan, Q. U. (2020) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-020-03595-1 · Cited by 10
Cherecheş, E. I., Bejan, D., Ibănescu, C., Danu, M., & Minea, A. A. (2023) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2023.101985 · Cited by 10
Hamze, S., Cabaleiro, D., Bégin, D., Desforges, A., Maré, T., Vigolo, B., Lugo, L., & Estellé, P. (2020) · Energies · doi:10.3390/en13133462 · Cited by 10
“The results of both the base fluids and the nanofluids were compared with the values calculated the weight-average equation, Equation (2) [56]: = , + , + , , (2)”
MethodSelf-citationCojocariu, N., Ţugui, C. A., Cherecheş, E. I., & Minea, A. A. (2025) · International Journal of Thermophysics · doi:10.1007/s10765-025-03621-6 · Cited by 8
Zahid, I., Farooq, M., & Farhan, M. (2023) · Materials horizons · doi:10.1007/978-981-99-5475-9_2 · Cited by 9
Guimarey, M. J. G., Marcos, M. A., Vallejo, J. P., Viesca, J. L., Comuñas, M. J. P., Lugo, L., & Battez, A. H. (2024) · Cellulose · doi:10.1007/s10570-024-06181-4 · Cited by 7
“The manufacturer’s stated that accuracy for thermal conductivity determinations with this device is 5% (Cabaleiro et al. 2020).”
Self-citationMarjanian, M. M., Bariki, S. G., Sobati, M. A., & Movahedirad, S. (2025) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2025.127508 · Cited by 6
Gupta, S. K., Kumari, S., & Singh, A. P. (2026) · Energy Storage and Saving · doi:10.1016/j.enss.2025.06.002 · Cited by 12
Thermophysical and Electrical Properties of Ethylene Glycol-Based Nanofluids Containing CaCO3
Traciak, J., Cabaleiro, D., Vallejo, J. P., & Fal, J. (2024) · Processes · doi:10.3390/pr12010172 · Cited by 6
Self-citationMarcos, M. A., Troncoso, N. G., Prado, J. I., Vallejo, J. P., Murshed, S. M. S., & Lugo, L. (2025) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2025.103406 · Cited by 4
Self-citationLiu, X., Ghnim, Z. S., Rajiv, A., Yadav, A., Saud, H. R., Shankhyan, A., Jaidka, S., Joshi, K. K., Adhab, A. H., Mahdi, M. S., et al. (2025) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2025.2477557 · Cited by 3
“[25] Cabaleiro et al.’s study focused on the synthesis and description of PCMs based on PEG 400 g.mol -1 , which were nano-enhanced using different carbon-based materials.”
RetractedMinea, A. A., Cherecheş, E. I., Ţugui, C. A., & Tofan, G. C. (2025) · Applied Sciences · doi:10.3390/app15189898 · Cited by 3
Cojocariu, N., Cherecheş, E. I., Bejan, D., Pricop, B., & Minea, A. A. (2025) · International Journal of Thermophysics · doi:10.1007/s10765-025-03665-8 · Cited by 2
Scaling On Transport Properties of Nanofluids for Heat Transfer Applications
Prado, J. I., Vallejo, J. P., & Lugo, L. (2024) · Proceedings of the World Congress on Momentum, Heat and Mass Transfer · doi:10.11159/enfht24.317 · Cited by 1
“C 14 [10], Ag/PEG400 [11], TiO 2 /H 2 O [12], and Al 2 O 3 /([C 2 mim][CH 3 SO 3 ]:H 2 O) [13 − 14] were selected with the aim to study a wide variety of base fluids and due to the availability of reliable experimental data of thermal conductivity and viscosity from the same laboratory or samples.”
BackgroundInfluentialSelf-citationRole of food additives on properties of Polysorbate 60 solutions
Gazolu-Rusanova, D., Mitrinova, Z., Pagureva, N., Burdzhiev, N. T., & Tcholakova, S. S. (2025) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2025.128844 · Cited by 1
Majadas, C. L., Peñaloga, J. M., & Salvador, R. (2020) · Resource-Efficient Technologies · doi:10.18799/24056537/2020/4/277 · Cited by 2
“In the experimental study of polyethylene glycol 400 dispersed with the different mass percentage of Ag nanoparticles [49], the specific heat capacity was 0.”
Hamze, S. (2020) · theses.fr (ABES) · doi:10.70675/b3702689z09e9z4b0azb50dz6bd1fba28ca8 · Cited by 1
Self-citationCFD ANALYSIS OF PEG 400 BASED NANOFLUIDS
Cherecheş, E. I., Cherecheş, M., Zupcu, L., & Minea, A. A. (2022) · International Journal of Modern Manufacturing Technologies · doi:10.54684/ijmmt.2022.14.3.33 · Cited by 1
Sajini, T., & Joseph, J. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-21855-2.00005-2
Investigation of thermal conductivity for nano-improved polyethylene glycol composites
Tao, X., Altalbawy, F. M. A., Vaghela, K., N, R. P. K., Kashyap, A., Chauhan, K., Abdullaeva, B., Bindu, D. H., Sahu, P. K., Ibragimovna, K. N., et al. (2026) · Discover Nano · doi:10.1186/s11671-026-04677-5
“They also engineered advanced PCMs by dispersing functionalized graphene sheets into PEG with a molecular weight of 400 g/mol [19] and further developed silver/PEG400 suspensions to enhance thermal conductivity for low-temperature storage [20].”
Abubakari, M., Oyem, A. O., & Mwasa, A. (2026) · Scientific Reports · doi:10.1038/s41598-026-69114-0
Metadata
- Authors
- Marcos, M. A., Cabaleiro, D., Hamze, S., Fedele, L., Bobbo, S., Estellé, P., & Lugo, L.
- Affiliations
- National Research Council (IT)
- Laboratoire de génie civil et génie mécanique (FR)
- Universidade de Vigo (ES)
- Corresponding author
- Cabaleiro, David
- ORCID
- Venue
- Nanomaterials
- Publisher
- MDPI AG
- Published
- 2019-12-19
- Volume
- 10
- Issue
- 1
- Pages
- 19
- ISSN
- 2079-4991 (ISSN-L)
- PMC
- PMC7022849
- OpenAlex
- W2995628132
- Cited by
- 45
- References
- 102
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 5 · 2023: 5 · 2022: 6 · 2021: 11 · 2020: 8
- FWCI
- 3.52
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Nanomaterials (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- HAL (submittedVersion, other-oa)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, other-oa)
- Investigo repository of University of Vigo (University of Vigo) (submittedVersion, cc-by)
- Investigo Institutional repository of UVigo (Universidade de Vigo) (submittedVersion, cc-by)
- Funders
- “Ministerio de Economía y Competitividad” (Spain) and FEDER program (ENE2014–55489–C2–2–R, ENE2017–86425–C2–1–R)
- Xunta de Galicia (GRC ED431C 2016–034)
- EU COST Action CA15119: Overcoming Barriers to Nanofluids Market Uptake (NANOUPTAKE) (COST-STSM-CA15119–41564, COST-STSM-CA15119–42472)
- European Union through the European Regional Development Fund (ERDF), the Ministry of Higher Education and Research, the French region of Brittany (and Rennes Métropole)
- Xunta de Galicia for a postdoctoral fellowship (ED481B-2017/017)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › nanoparticles nucleation surface interactions
- Keywords
- phase change materials, silver nanoparticles, polyethylene glycol, polyethylene glycol 400, polyvinylpyrrolidone stabilization, thermal energy storage, nanoparticle suspensions, thermal conductivity, dynamic viscosity, heat capacity, density, surface tension, subcooling, Vogel-Fulcher-Tammann equation, nanoparticle volume concentration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.