The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Roughness and Fiber Fraction Dominated Wetting of Electrospun Fiber-Based Porous Meshes
Open accessAbstract
Wettability of electrospun fibers is one of the key parameters in the biomedical and filtration industry. Within this comprehensive study of contact angles on three-dimensional (3D) meshes made of electrospun fibers and films, from seven types of polymers, we clearly indicated the importance of roughness analysis. Surface chemistry was analyzed with X-ray photoelectron microscopy (XPS) and it showed no significant difference between fibers and films, confirming that the hydrophobic properties of the surfaces can be enhanced by just roughness without any chemical treatment. The surface geometry was determining factor in wetting contact angle analysis on electrospun meshes. We noted that it was very important how the geometry of electrospun surfaces was validated. The commonly used fiber diameter was not necessarily a convincing parameter unless it was correlated with the surface roughness or fraction of fibers or pores. Importantly, this study provides the guidelines to verify the surface free energy decrease with the fiber fraction for the meshes, to validate the changes in wetting contact angles. Eventually, the analysis suggested that meshes could maintain the entrapped air between fibers, decreasing surface free energies for polymers, which increased the contact angle for liquids with surface tension above the critical Wenzel level to maintain the Cassie-Baxter regime for hydrophobic surfaces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807 · cited 1×
“The Ff is directly correlated with the volume of air trapped at the surface of meshes, which defines the hydrophobicity for the Cassie-Baxter wetting regime [52,53] or hydrophlilicity for applicability of the Wenzel wetting theory [54].”
BackgroundRESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316 · cited 1×
“The Ff is directly correlated with the volume of air trapped at the surface of meshes, which defines the hydrophobicity for the Cassie-Baxter wetting regime [52,53] or hydrophlilicity for applicability of the Wenzel wetting theory [54].”
Background
Cited by
Metwally, S., & Stachewicz, U. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109883 · Cited by 382
Self-citationEnhanced Piezoelectricity of Electrospun Polyvinylidene Fluoride Fibers for Energy Harvesting
Szewczyk, P. K., Gradys, A., Kim, S. K., Persano, L., Marzec, M., Kryshtal, A., Busolo, T., Toncelli, A., Pisignano, D., Bernasik, A., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c02578 · Cited by 290
Self-citationKaniuk, Ł., Krysiak, Z. J., Metwally, S., & Stachewicz, U. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.110668 · Cited by 63
Self-citation
Metadata
- Authors
- Szewczyk, P. K., Ura, D. P., Metwally, S., Knapczyk-Korczak, J., Gajek, M., Marzec, M. M., Bernasik, A., & Stachewicz, U.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2018-12-27
- Volume
- 11
- Issue
- 1
- Pages
- 34
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2906552563
- Cited by
- 212
- References
- 2
- FWCI
- 6.99
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.