The DOI matches its Crossref record; 103 of the 103 references it cites were found in a registry or an index.
Degradation and Recycling of Films Based on Biodegradable Polymers: A Short Review
Open accessAbstract
The environmental performance of biodegradable materials has attracted attention from the academic and the industrial research over the recent years. Currently, degradation behavior and possible recyclability features, as well as actual recycling paths of such systems, are crucial to give them both durability and eco-sustainability. This paper presents a review of the degradation behaviour of biodegradable polymers and related composites, with particular concern for multi-layer films. The processing of biodegradable polymeric films and the manufacturing and properties of multilayer films based on biodegradable polymers will be discussed. The results and data collected show that: poly-lactic acid (PLA), poly-butylene adipate-co-terephthalate (PBAT) and poly-caprolactone (PCL) are the most used biodegradable polymers, but are prone to hydrolytic degradation during processing; environmental degradation is favored by enzymes, and can take place within weeks, while in water it can take from months to years; thermal degradation during recycling basically follows a hydrolytic path, due to moisture and high temperatures (β-scissions and transesterification) which may compromise processing and recycling; ultraviolet (UV) and thermal stabilization can be adequately performed using suitable stabilizers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Recycling and recovery routes of plastic solid waste (PSW): A review
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Waste Management · doi:10.1016/j.wasman.2009.06.004 · Cited by 2,404
Mechanistic implications of plastic degradation
Singh, B., & Sharma, N. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.11.008 · Cited by 1,569 · cited 1×
“[46] prepared a review, discussing different kinds of polymeric degradations along with their mechanisms, including thermal degradation, photo-oxidative degradation, catalytic degradation, biodegradation, mechanic-chemical degradation and ozone-induced degradation, highlighting how different polymers can behave in a c…”
BackgroundAl-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906
Biopolymers: overview of several properties and consequences on their applications
Van de Velde, K., & Kiekens, P. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00107-6 · Cited by 887
Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
Compostability of bioplastic packaging materials: An overview
Kale, G., Kijchavengkul, T., Auras, R., Rubino, M., Selke, S. E., & Singh, S. P. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600168 · Cited by 618
An overview on the degradability of polymer nanocomposites
Pandey, J. K., Raghunatha Reddy, K., Pratheep Kumar, A., & Singh, R. P. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.09.013 · Cited by 584
Witt, U., Einig, T., Yamamoto, M., Kleeberg, I., Deckwer, W.-D., & Müller, R.-J. (2001) · Chemosphere · doi:10.1016/s0045-6535(00)00162-4 · Cited by 434
The intracellular degradation of poly(ε‐caprolactone)
Woodward, S. C., Brewer, P. S., Moatamed, F., Schindler, A., & Pitt, C. G. (1985) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820190408 · Cited by 380
Li, J.-H., Miao, J., Wu, J.-L., Chen, S.-F., & Zhang, Q.-Q. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.10.015 · Cited by 373
Soy protein – Poly (lactic acid) bilayer films as biodegradable material for active food packaging
González, A., & Alvarez Igarzabal, C. I. (2013) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.03.010 · Cited by 299
Thermal degradation of cellulose derivatives/starch blends and sisal fibre biocomposites
Alvarez, V. A., & Vázquez, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.09.003 · Cited by 276
Xing, Q., Buono, P., Ruch, D., Dubois, P., Wu, L., & Wang, W.-J. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05755 · Cited by 250
Mechanical reprocessing of polyolefin waste: A review
Yin, S., Tuladhar, R., Shi, F., Shanks, R. A., Combe, M., & Collister, T. (2015) · Polymer Engineering & Science · doi:10.1002/pen.24182 · Cited by 246
Characterisation of multi-extruded poly(lactic acid)
Żenkiewicz, M., Richert, J., Rytlewski, P., Moraczewski, K., Stepczyńska, M., & Karasiewicz, T. (2009) · Polymer Testing · doi:10.1016/j.polymertesting.2009.01.012 · Cited by 241
Nanoclay and crystallinity effects on the hydrolytic degradation of polylactides
Zhou, Q., & Xanthos, M. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.05.014 · Cited by 218
Development and characterization of sugar palm starch and poly(lactic acid) bilayer films
Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.051 · Cited by 197
Gupta, A., Simmons, W., Schueneman, G. T., Hylton, D., & Mintz, E. A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02458 · Cited by 197
Kurek, M., Galus, S., & Debeaufort, F. (2014) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2014.01.001 · Cited by 196
Mofokeng, J. P., & Luyt, A. S. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.05.007 · Cited by 186
Sandwich-Architectured Poly(lactic acid)–Graphene Composite Food Packaging Films
Goh, K., Heising, J. K., Yuan, Y., Karahan, H. E., Wei, L., Zhai, S., Koh, J.-X., Htin, N. M., Zhang, F., Wang, R., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02498 · Cited by 182
Hydrolytic and enzymatic degradation of a poly(ε-caprolactone) network
Castilla-Cortázar, I., Más-Estellés, J., Meseguer-Dueñas, J. M., Escobar Ivirico, J. L., Marí, B., & Vidaurre, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.05.038 · Cited by 181
Film blowing of thermoplastic starch
Thunwall, M., Kuthanová, V., Boldizar, A., & Rigdahl, M. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.07.001 · Cited by 169
Badia-Valiente, J. D., Strömberg, E., Karlsson, S., & Ribes-Greus, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.12.019 · Cited by 167
Mechanical recycling of polylactide, upgrading trends and combination of valorization techniques
Badia, J. D., & Ribes-Greus, A. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.09.005 · Cited by 161
Ferry, L., Dorez, G., Taguet, A., Otazaghine, B., & Lopez‐Cuesta, J. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.12.015 · Cited by 159
Polysaccharide nanocrystals as fillers for PLA based nanocomposites
Scaffaro, R., Botta, L., Lopresti, F., Maio, A., & Sutera, F. (2016) · Cellulose · doi:10.1007/s10570-016-1143-3 · Cited by 155
Self-citationScarfato, P., Maio, L. D., & Incarnato, L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42597 · Cited by 150
Li, X., Ai, X., Pan, H., Yang, J., Gao, G., Zhang, H., Yang, H., & Dong, L. (2018) · Polymers for Advanced Technologies · doi:10.1002/pat.4274 · Cited by 147
Degradable and bioresorbable polymers in surgery and in pharmacology: beliefs and facts
Vert, M. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3581-4 · Cited by 141
Mallegni, N., Phuong, T. V., Coltelli, M., Cinelli, P., & Lazzeri, A. (2018) · Materials · doi:10.3390/ma11010148 · Cited by 140
Scaffaro, R., Botta, L., & Benedetto, G. D. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.12.018 · Cited by 138
Self-citationElectrospun PCL/GO-g-PEG structures: Processing-morphology-properties relationships
Scaffaro, R., Lopresti, F., Maio, A., et al. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.11.005 · Cited by 132
Self-citationDevelopment and characterization of bilayer films of FucoPol and chitosan
Ferreira, A. S., Torres, C. A. V., Freitas, F., Sevrin, C., Grandfils, C., Reis, M. A. M., Alves, V. D., & Coelhoso, I. M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.089 · Cited by 131
Li, J., Lai, L., Wu, L., Severtson, S. J., & Wang, W. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00430 · Cited by 124
Khalid, S., Yu, L., Feng, M., Meng, L., Bai, Y., Ali, A., Liu, H., & Chen, L. (2018) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2018.08.008 · Cited by 122
Effect of adding wood flour to the physical properties of a biodegradable polymer
Morreale, M., Scaffaro, R., Maio, A., & Mantia, F. P. L. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.12.002 · Cited by 120
Self-citationLa Mantia, F. P., Botta, L., Morreale, M., & Scaffaro, R. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.10.017 · Cited by 118
Self-citationBeltrán, F. R., Lorenzo, V., Acosta, J., de la Orden, M. U., & Urreaga, J. M. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.05.020 · Cited by 115
Reprocessing of PLA/Graphene Nanoplatelets Nanocomposites
Botta, L., Scaffaro, R., Sutera, F., & Mistretta, M. C. (2017) · Polymers · doi:10.3390/polym10010018 · Cited by 112
Self-citationMüller, C., Townsend, K., & Matschullat, J. (2012) · Science of The Total Environment · doi:10.1016/j.scitotenv.2011.10.069 · Cited by 104
Tian, H., Wang, Y., Zhang, L., Quan, C., & Zhang, X. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.02.009 · Cited by 103
Production and characterization of sodium caseinate edible films made by blown-film extrusion
Belyamani, I., Prochazka, F., & Assezat, G. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.08.019 · Cited by 95
Scaffaro, R., Maio, A., Re, G. L., Parisi, A., & Busacca, A. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.01.008 · Cited by 89
Self-citationPreparation and Recycling of Plasticized PLA
Scaffaro, R., Morreale, M., Mirabella, F., & Mantia, F. P. L. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000221 · Cited by 87
Self-citationScaffaro, R., Maio, A., & Lopresti, F. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.06.024 · Cited by 86
Self-citationLi, X., Yan, X., Yang, J., Pan, H., Gao, G., Zhang, H., & Dong, L. (2017) · Polymer Engineering and Science · doi:10.1002/pen.24795 · Cited by 82
Film blowing of PHBV blends and PHBV‐based multilayers for the production of biodegradable packages
Cunha, M., Fernandes, B. D., Covas, J. A., Vicente, A. A., & Hilliou, L. H. G. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42165 · Cited by 79
Morreale, M., Liga, A., Mistretta, M. C., Ascione, L., & Mantia, F. P. L. (2015) · Materials · doi:10.3390/ma8115406 · Cited by 79
Self-citationAmorin, N. S. Q. S., da Rosa, G. S., Alves, J. F., Gonçalves, S. P. C., Franchetti, S. M. M., & Fechine, G. J. M. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40023 · Cited by 78
Effect of the Recycling and Annealing on the Mechanical and Fracture Properties of Poly(Lactic Acid)
Nascimento, L., Gámez‐Pérez, J., Pérez, O. O. S., Velasco, J. I., Maspoch, M. L., & Urquiza, E. A. F. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0229-5 · Cited by 76
Beltrán, F. R., Lorenzo, V., de la Orden, M. U., & Urreaga, J. M. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.09.018 · Cited by 75
Perfluorocarbons–graphene oxide nanoplatforms as biocompatible oxygen reservoirs
Maio, A., Scaffaro, R., Lentini, L., et al. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.032 · Cited by 73
Self-citationComparison of abiotic and biotic degradation of PDLLA, PCL and partially miscible PDLLA/PCL blend
Fukushima, K., Feijoo, J. L., & Yang, M. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.011 · Cited by 72
Development of Polymeric Functionally Graded Scaffolds: A Brief Review
Scaffaro, R., Lopresti, F., Maio, A., Sutera, F., & Botta, L. (2016) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.5000332 · Cited by 71
Self-citationNanocellulose-Based Polymeric Blends for Food Packaging Applications
Arrieta, M. P., Fortunati, E., Burgos, N., Peltzer, M. A., López, J., & Peponi, L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00007-9 · Cited by 69
How Performance and Fate of Biodegradable Mulch Films are Impacted by Field Ageing
Touchaleaume, F., Angellier‐Coussy, H., César, G., Raffard, G., Gontard, N., & Gastaldi, E. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-1154-7 · Cited by 64
Comparison of different processing methods to prepare poly(lactid acid)–hydrotalcite composites
Scaffaro, R., Botta, L., Passaglia, E., Oberhauser, W., Frediani, M., & Landro, L. D. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23724 · Cited by 60
Self-citationControl of biofilm formation by poly-ethylene-co-vinyl acetate films incorporating nisin
Nostro, A., Scaffaro, R., Ginestra, G., D’Arrigo, M., Botta, L., Marino, A., & Bisignano, G. (2010) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-010-2598-z · Cited by 59
Self-citationMechanical behavior of polylactic acid/polycaprolactone porous layered functional composites
Scaffaro, R., Lopresti, F., Botta, L., et al. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.05.023 · Cited by 59
Self-citationOliveira, J. T., Correlo, V. M., Sol, P. C., et al. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2007.0307 · Cited by 58
Schneider, J., Manjure, S., & Narayan, R. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43310 · Cited by 56
Effect of the orientation and rheological behaviour of biodegradable polymer nanocomposites
Mantia, F. P. L., Arrigo, R., & Morreale, M. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.02.007 · Cited by 54
Self-citationSun, S., Liu, P., Ji, N., Hou, H., & Dong, H. (2017) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2017.05.030 · Cited by 53
The challenges in lifetime prediction of oxodegradable polyolefin and biodegradable polymer films
Nikolić, M., Gauthier, E., Colwell, J. M., Halley, P. J., Bottle, S. E., Laycock, B. G., & Truss, R. W. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.07.018 · Cited by 52
Peinado, V., Castell, P., García, L., & Fernández, Á. (2015) · Materials · doi:10.3390/ma8105360 · Cited by 51
Morphology and Properties of Polyethylene/Clay Nanocomposite Drawn Fibers
Mantia, F. P. L., Dintcheva, N. T., Scaffaro, R., & Marino, R. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200700204 · Cited by 50
Self-citationTsutsumi, C., Hayase, N., Nakagawa, K., Tanaka, S., & Miyahara, Y. (2003) · Macromolecular Symposia · doi:10.1002/masy.200350737 · Cited by 49
Scaffaro, R., Botta, L., Mistretta, M. C., & Mantia, F. P. L. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.07.029 · Cited by 47
Self-citationDevelopment of expert system for biobased polymer material selection: food packaging application
Sanyang, M. L., & Sapuan, S. M. (2015) · Journal of Food Science and Technology · doi:10.1007/s13197-015-1759-6 · Cited by 45
Mechanical behaviour of Mater-Bi®/wood flour composites: A statistical approach
Morreale, M., Scaffaro, R., Maio, A., & Mantia, F. P. L. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.05.015 · Cited by 44
Self-citationBiodegradation paths of Mater‐Bi®/kenaf biodegradable composites
Re, G. L., Morreale, M., Scaffaro, R., & Mantia, F. P. L. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39027 · Cited by 44
Self-citationDegradation of Mater-Bi®/wood flour biocomposites in active sewage sludge
Scaffaro, R., Morreale, M., Re, G. L., & Mantia, F. P. L. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.04.028 · Cited by 43
Self-citationSangroniz, A., González, A., Martin, L., Irusta, L., Iriarte, M., & Etxeberria, A. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.01.023 · Cited by 43
Tesfaye, M., Patwa, R., Gupta, A., Kashyap, M. J., & Katiyar, V. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.03.085 · Cited by 42
Botta, L., Mistretta, M. C., Palermo, S. S., Fragalà, M., & Pappalardo, F. (2015) · Journal of Polymers and the Environment · doi:10.1007/s10924-015-0729-4 · Cited by 41
Niaounakis, M. (2013) · Elsevier eBooks · doi:10.1016/b978-1-4557-3145-9.00003-8 · Cited by 40
Salazar, S. A., Gámez‐Meza, N., Medina‐Juárez, L. Á., Malinconico, M., & Cerruti, P. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03124 · Cited by 39
Structure-properties relationships in melt reprocessed PLA/hydrotalcites nanocomposites
Scaffaro, R., Sutera, F., Mistretta, M. C., Botta, L., & Mantia, F. P. L. (2017) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2017.53 · Cited by 36
Self-citationScaffaro, R., Maio, A., Botta, L., Gulino, E. F., & Gulli, D. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.11.031 · Cited by 35
Self-citationPhoto-oxidative degradation of poly(ethylene-co-vinyl acetate)/nisin antimicrobial films
Scaffaro, R., Botta, L., & Gallo, G. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.01.003 · Cited by 34
Self-citationScaffaro, R., Morreale, M., Re, G. L., & Mantia, F. P. L. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30822 · Cited by 34
Self-citationScaffaro, R., Botta, L., & Mantia, F. P. L. (2009) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900004 · Cited by 33
Self-citationKucharczyk, P., Otgonzu, O., Kitano, T., Kovalcik, A., Kreuh, D., Cvelbar, U., Sedlařík, V., & Sáha, P. (2012) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2012.709296 · Cited by 31
Reprocessing and restabilization of greenhouse films
Dintcheva, N. T., Mantia, F. P. L., Scaffaro, R., et al. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00248-8 · Cited by 30
Self-citationSedlařík, V., Otgonzul, O., Kitano, T., Kovalcik, A., Hrabalova, M., Junkar, I., Cvelbar, U., Mozetič, M., & Sáha, P. (2011) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2011.610265 · Cited by 28
Admicellar Polymerization Coating of CNF Enhances Integration in Degradable Nanocomposites
Edlund, U., Lagerberg, T., & Ålander, E. M. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01318 · Cited by 28
Recycling and Thermomechanical Degradation of LDPE/Modified Clay Nanocomposites
Mantia, F. P. L., Mistretta, M. C., & Morreale, M. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200449 · Cited by 27
Self-citationKenaf‐filled biodegradable composites: rheological and mechanical behaviour
Re, G. L., Morreale, M., Scaffaro, R., & Mantia, F. P. L. (2012) · Polymer International · doi:10.1002/pi.4243 · Cited by 27
Self-citationRecycling of a starch-based biodegradable polymer
Mantia, F. P. L., Scaffaro, R., & Bastioli, C. (2002) · Macromolecular Symposia · doi:10.1002/1521-3900(200203)180:1<133::aid-masy133>3.0.co;2-9 · Cited by 24
Self-citationMantia, F. P. L., Ceraulo, M., Mistretta, M. C., & Morreale, M. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0995-4 · Cited by 22
Self-citationAroma scalping characteristics of polybutylene succinate based films
Číhal, P., Vopička, O., Pilnáček, K., Poustka, J., Friess, K., Hajšlová, J., Dobiáš, J., & Dole, P. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.07.006 · Cited by 20
Morphology Modification of Polyethylene/Clay Nanocomposite Samples under Convergent Flow
Mantia, F. P. L., Marino, R., & Dintcheva, N. T. (2009) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900066 · Cited by 18
Effect of Hot Drawing on the Mechanical Properties of Biodegradable Fibers
Mantia, F. P. L., Ceraulo, M., Mistretta, M. C., & Morreale, M. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-015-0747-2 · Cited by 16
Self-citationCinética de degradación térmica de poliácido láctico en múltiples extrusiones
González, A. F. R., & Carrero-Mantilla, J. (2015) · Ingenieria y Universidad · doi:10.11144/javeriana.iyu19-1.tdkp · Cited by 15
Effect of Cold Drawing on Mechanical Properties of Biodegradable Fibers
Mantia, F. P. L., Ceraulo, M., Mistretta, M. C., & Morreale, M. (2016) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.5000328 · Cited by 15
Self-citationGregorová, A., Riedl, E., Sedlařík, V., & Stelzer, F. (2012) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.1650 · Cited by 13
Palm oil deodorizer distillate as toughening agent in polylactide packaging films
Ruellan, A., Ducruet, V., Gratia, A., Jimenez, L. S., Guinault, A., Sollogoub, C., Chollet, G., & Domenek, S. (2016) · Polymer International · doi:10.1002/pi.5114 · Cited by 13
Mantia, F. P. L., Ceraulo, M., Mistretta, M. C., Sutera, F., Ascione, L., & Nasillo, G. (2016) · International Polymer Processing · doi:10.3139/217.3224 · Cited by 13
Self-citationThermal and Oxidative Degradation Behavior of Polymers and Nanocomposites
Ramasubramanian, G., & Madbouly, S. A. (2015) · Wiley eBooks · doi:10.1002/9781119117711.ch6 · Cited by 4
Cited by
Multilayer packaging: Advances in preparation techniques and emerging food applications
Anukiruthika, T., Sethupathy, P., Wilson, A., Kashampur, K., Moses, J. A., & Anandharamakrishnan, C. (2020) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12556 · Cited by 320
Becoming Sustainable, The New Frontier in Soft Robotics
Hartmann, F., Baumgartner, M., & Kaltenbrunner, M. (2021) · Advanced Materials · doi:10.1002/adma.202004413 · Cited by 281
Recovery of Banana Waste-Loss from Production and Processing: A Contribution to a Circular Economy
Alzate Acevedo, S., Díaz Carrillo, Á. J., Flórez-López, E., & Grande-Tovar, C. D. (2021) · Molecules · doi:10.3390/molecules26175282 · Cited by 277
Aversa, C., Barletta, M., Cappiello, G., & Gisario, A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111304 · Cited by 213
Review on the Degradation of Poly(lactic acid) during Melt Processing
Velghe, I., Buffel, B., Vandeginste, V., Thielemans, W., & Desplentere, F. (2023) · Polymers · doi:10.3390/polym15092047 · Cited by 146
Metadata
- Authors
- Scaffaro, R., Maio, A., Sutera, F., Gulino, E., & Morreale, M.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2019-04-09
- Volume
- 11
- Issue
- 4
- Pages
- 651
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2939827124
- Cited by
- 254
- References
- 103
- FWCI
- 7.33
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.