The DOI matches its Crossref record; 117 of the 117 references it cites were found in a registry or an index.
Applications of Lignocellulosic Fibers and Lignin in Bioplastics: A Review
Open accessAbstract
Lignocellulosic fibers and lignin are two of the most important natural bioresources in the world. They show tremendous potential to decrease energy utilization/pollution and improve biodegradability by replacing synthetic fibers in bioplastics. The compatibility between the fiber-matrix plays an important part in the properties of the bioplastics. The improvement of lignocellulosic fiber properties by most surface treatments generally removes lignin. Due to the environmental pollution and high cost of cellulose modification, focus has been directed toward the use of lignocellulosic fibers in bioplastics. In addition, lignin-reinforced bioplastics are fabricated with varying success. These applications confirm there is no need to remove lignin from lignocellulosic fibers when preparing the bioplastics from a technical point of view. In this review, characterizations of lignocellulosic fibers and lignin related to their applications in bioplastics are covered. Then, we generalize the developments and problems of lignin-reinforced bioplastics and modification of lignin to improve the interaction of lignin-matrix. As for lignocellulosic fiber-reinforced bioplastics, we place importance on the low compatibility of the lignocellulosic fiber–matrix. The applications of lignin-containing cellulose and lignocellulosic fibers without delignification in the bioplastics are reviewed. A comparison between lignocellulosic fibers and lignin in the bioplastics is given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
Bright Side of Lignin Depolymerization: Toward New Platform Chemicals
Sun, Z., Fridrich, B., de Santi, A., Elangovan, S., & Barta, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00588 · Cited by 2,191
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058
Biodegradation and biological treatments of cellulose, hemicellulose and lignin: an overview
Pérez, J., Muñoz-Dorado, J., de la Rubia, T., & Martínez, J. (2002) · International Microbiology · doi:10.1007/s10123-002-0062-3 · Cited by 1,717
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
Progress in Green Polymer Composites from Lignin for Multifunctional Applications: A Review
Thakur, V. K., Thakur, M. K., Raghavan, P., & Kessler, M. R. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500087z · Cited by 1,398
Formic-acid-induced depolymerization of oxidized lignin to aromatics
Rahimi, A., Ulbrich, A., Coon, J. J., & Stahl, S. S. (2014) · Nature · doi:10.1038/nature13867 · Cited by 1,181
Value-adding to cellulosic ethanol: Lignin polymers
Doherty, W. O. S., Mousavioun, P., & Fellows, C. M. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.10.022 · Cited by 978
A review on lignin-based polymeric, micro- and nano-structured materials
Duval, A., & Lawoko, M. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.09.017 · Cited by 733
Challenges in industrial applications of technical lignins
Vishtal, A., & Kraslawski, A. (2011) · BioResources · doi:10.15376/biores.6.3.3547-3568 · Cited by 721
Recent advances in green hydrogels from lignin: a review
Thakur, V. K., & Thakur, M. K. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.09.044 · Cited by 622
Tarasov, D., Leitch, M., & Fatehi, P. (2018) · Biotechnology for Biofuels · doi:10.1186/s13068-018-1262-1 · Cited by 610
Starch-based nano-biocomposites
Xie, F., Pollet, E., Halley, P. J., & Avérous, L. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.002 · Cited by 550
Morphology and properties of compatibilized polylactide/thermoplastic starch blends
Huneault, M. A., & Li, H. (2007) · Polymer · doi:10.1016/j.polymer.2006.11.023 · Cited by 506
Characterization and analysis of the molecular weight of lignin for biorefining studies
Tolbert, A., Akinosho, H., Khunsupat, R., Naskar, A. K., & Ragauskas, A. J. (2014) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1500 · Cited by 504
Lignocellulosics as sustainable resources for production of bioplastics – A review
Brodin, M., Vallejos, M., Opedal, M. T., Area, M. C., & Chinga-Carrasco, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.209 · Cited by 466
Current Understanding of the Correlation of Lignin Structure with Biomass Recalcitrance
Li, M., Pu, Y., & Ragauskas, A. J. (2016) · Frontiers in Chemistry · doi:10.3389/fchem.2016.00045 · Cited by 419
Polymer/lignin blends: Interactions, properties, applications
Kun, D., & Pukánszky, B. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.04.035 · Cited by 417
Choo, K., Ching, Y., Chuah, C., Julai, S., & Liou, N.-S. (2016) · Materials · doi:10.3390/ma9080644 · Cited by 404
Self-citationEffect of fiber treatment on flexural properties of natural fiber reinforced composites: A review
Sood, M., & Dwivedi, G. (2018) · Egyptian Journal of Petroleum · doi:10.1016/j.ejpe.2017.11.005 · Cited by 384
Lignin-derivatives based polymers, blends and composites: A review
Naseem, A., Tabasum, S., Zia, K. M., Zuber, M., Ali, M., & Noreen, A. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.08.030 · Cited by 343
A Renewable Lignin–Lactide Copolymer and Application in Biobased Composites
Chung, Y.-L., Olsson, J. V., Li, R. J., Frank, C. W., Waymouth, R. M., Billington, S. L., & Sattely, E. S. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc4000835 · Cited by 340
The pros and cons of lignin valorisation in an integrated biorefinery
Strassberger, Z., Tanase, S., & Rothenberg, G. (2014) · RSC Adv. · doi:10.1039/c4ra04747h · Cited by 335
Sanchez-Garcia, M. D., Gimenez, E., & Lagaron, J. M. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.041 · Cited by 333
Liu, W., Misra, M., Askeland, P., Drzal, L. T., & Mohanty, A. K. (2005) · Polymer · doi:10.1016/j.polymer.2005.01.027 · Cited by 331
Rosa, M. F., Chiou, B.-S., Medeiros, E. S., Wood, D. F., Williams, T. G., Mattoso, L. H. C., Orts, W. J., & Imam, S. H. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.03.085 · Cited by 319
Physicochemical properties of PLA lignin blends
Gordobil, O., Egüés, I., Llano-Ponte, R., & Labidi, J. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.002 · Cited by 312
Panthapulakkal, S., Zereshkian, A., & Sain, M. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.02.043 · Cited by 284
Green composite films prepared from cellulose, starch and lignin in room-temperature ionic liquid
Wu, R.-L., Wang, X.-L., Li, F., Li, H.-Z., & Wang, Y.-Z. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.11.044 · Cited by 278
Wood fiber reinforced bacterial bioplastic composites: Fabrication and performance evaluation
SINGH, S., & MOHANTY, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.11.009 · Cited by 268
Recent Development in Chemical Depolymerization of Lignin: A Review
Wang, H., Tucker, M., & Ji, Y. (2013) · Journal of Applied Chemistry · doi:10.1155/2013/838645 · Cited by 260
A sustainable bioplastic obtained from rice straw
Bilo, F., Pandini, S., Sartore, L., Depero, L. E., Gargiulo, G., Bonassi, A., Federici, S., & Bontempi, E. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.252 · Cited by 252
Evaluation of PLA–lignin bioplastics properties before and after accelerated weathering
Spiridon, I., Leluk, K., Resmerita, A. M., & Darie, R. N. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2014.10.006 · Cited by 250
Baumberger, S., Abaecherli, A., Fasching, M., Gellerstedt, G., Gosselink, R., Hortling, B., Li, J., Saake, B., & de Jong, E. (2007) · Holzforschung · doi:10.1515/hf.2007.074 · Cited by 247
Singh, S., Mohanty, A. K., Sugie, T., Takai, Y., & Hamada, H. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.01.004 · Cited by 244
Yang, W., Fortunati, E., Dominici, F., Giovanale, G., Mazzaglia, A., Balestra, G. M., Kenny, J. M., & Puglia, D. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.04.068 · Cited by 236
Sampath, U. G. T. M., Ching, Y. C., Chuah, C. H., Singh, R., & Lin, P.-C. (2017) · Cellulose · doi:10.1007/s10570-017-1251-8 · Cited by 224
Self-citationLiu, W., Drzal, L. T., Mohanty, A. K., & Misra, M. (2007) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2006.05.003 · Cited by 209
Yang, W., Fortunati, E., Dominici, F., Kenny, J. M., & Puglia, D. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.051 · Cited by 200
Graupner, N. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2762-3 · Cited by 199
Polypropylene composites with enzyme modified abaca fibre
Bledzki, A. K., Mamun, A. A., Jaszkiewicz, A., & Erdmann, K. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.02.003 · Cited by 198
Nair, S. S., Chen, H., Peng, Y., Huang, Y., & Yan, N. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01405 · Cited by 198
Gupta, A., Simmons, W., Schueneman, G. T., Hylton, D., & Mintz, E. A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02458 · Cited by 197
Tan, B., Ching, Y., Poh, S., Abdullah, L., & Gan, S. (2015) · Polymers · doi:10.3390/polym7111509 · Cited by 193
Self-citationSun, Y., Yang, L., Lu, X., & He, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05991c · Cited by 178
Ochi, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.12.019 · Cited by 175
Shankar, S., Rhim, J., & Won, K. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.10.038 · Cited by 173
Bio-renewable precursor fibers from lignin/polylactide blends for conversion to carbon fibers
Thunga, M., Chen, K., Grewell, D., & Kessler, M. R. (2014) · Carbon · doi:10.1016/j.carbon.2013.10.075 · Cited by 168
The significance of the glass transition of lignin in thermomechanical pulping
Irvine, G. M. (1985) · Wood Science and Technology · doi:10.1007/bf00353074 · Cited by 166
Utilization of Lignin in Biopolymeric Packaging Films
Zadeh, E. M., O’Keefe, S. F., & Kim, Y. (2018) · ACS Omega · doi:10.1021/acsomega.7b01341 · Cited by 162
Enhancement of Curcumin Bioavailability Using Nanocellulose Reinforced Chitosan Hydrogel
Udeni Gunathilake, T., Ching, Y., & Chuah, C. (2017) · Polymers · doi:10.3390/polym9020064 · Cited by 159
Self-citationAnwer, M. A. S., Naguib, H. E., Celzard, A., & Fierro, V. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.08.028 · Cited by 157
Rheological properties of cellulose nanocrystal-embedded polymer composites: a review
Ching, Y. C., Ali, M. E., Abdullah, L. C., Choo, K. W., Kuan, Y. C., Julaihi, S. J., Chuah, C. H., & Liou, N.-S. (2016) · Cellulose · doi:10.1007/s10570-016-0868-3 · Cited by 157
Self-citationBhat, R., Abdullah, N., Din, R. H., & Tay, G. S. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.06.043 · Cited by 155
Lignin–polymer blends: evaluation of compatibility by image analysis
Pouteau, C., Baumberger, S., Cathala, B., & Dole, P. (2004) · Comptes Rendus Biologies · doi:10.1016/j.crvi.2004.08.008 · Cited by 151
Costes, L., Laoutid, F., Brohez, S., Delvosalle, C., & Dúbois, P. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.07.018 · Cited by 147
Lignin: Chemical structure, biodegradation, and practical application (a review)
Феофилова, Е. П., & Mysyakina, I. S. (2016) · Applied Biochemistry and Microbiology · doi:10.1134/s0003683816060053 · Cited by 144
Use of kraft lignin as filler for starch films
Baumberger, S., Lapierre, C., Monties, B. B., & Valle, G. D. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00193-6 · Cited by 140
Thermal stability and miscibility of poly(hydroxybutyrate) and soda lignin blends
Mousavioun, P., Doherty, W. O. S., & George, G. A. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.08.001 · Cited by 136
Gallos, A., Paës, G., Allais, F., & Beaugrand, J. (2017) · RSC Advances · doi:10.1039/c7ra05240e · Cited by 135
Liu, R., Peng, Y., Cao, J., et al. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.08.005 · Cited by 132
Thermophysical properties and rheology of PHB/lignin blends
Mousavioun, P., Halley, P. J., & Doherty, W. O. S. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.07.026 · Cited by 129
High‐Strength Composite Fibers from Cellulose–Lignin Blends Regenerated from Ionic Liquid Solution
Ma, Y., Asaadi, S., Johansson, L., Ahvenainen, P., Reza, M., Alekhina, M., Rautkari, L., Michud, A., Hauru, L. K. J., Hummel, M., et al. (2015) · ChemSusChem · doi:10.1002/cssc.201501094 · Cited by 128
Green composites prepared from aliphatic polyesters and bast fibers
Terzopoulou, Z. N., Papageorgiou, G. Z., Papadopoulou, E., Athanassiadou, E., Alexopoulou, E., & Bikiaris, D. Ν. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.08.034 · Cited by 125
Bertini, F., Canetti, M., Cacciamani, A., Elegir, G., Orlandi, M. E., & Zoia, L. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.03.009 · Cited by 122
Review of Bionanocomposite Coating Films and Their Applications
Haniffa, M. A. C. M., Ching, Y. C., Abdullah, L. C., Poh, S. C., & Chuah, C. H. (2016) · Polymers · doi:10.3390/polym8070246 · Cited by 120
Self-citationAsrofi, M., Abral, H., Putra, Y. K., Sapuan, S. M., & Kim, H. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.11.165 · Cited by 109
Low cost carbon fibers from bio-renewable Lignin/Poly(lactic acid) (PLA) blends
Wang, S., Li, Y., Xiang, H., Zhou, Z., Chang, T., & Zhu, M. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.09.021 · Cited by 107
Yee, Y. Y., Ching, Y. C., Rozali, S., Hashim, N. A., & Singh, R. (2016) · BioResources · doi:10.15376/biores.11.1.2269-2286 · Cited by 106
Self-citationDesign, characterization and preliminary biological evaluation of new lignin-PLA biocomposites
Spiridon, I., & Tanase, C. E. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.03.140 · Cited by 106
Kumar, A., Tumu, V. R., Chowdhury, S. R., & Ramana Reddy, S. V. S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.10.057 · Cited by 99
Spiridon, I., Teacă, C., & Bodîrlău, R. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-5210-0 · Cited by 98
Aqlil, M., Nzenguet, A. M., Essamlali, Y., Snik, A., Larzek, M., & Zahouily, M. (2017) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.7b04155 · Cited by 98
Adsorption of Proteins on Colloidal Lignin Particles for Advanced Biomaterials
Leskinen, T., Witos, J., Valle‐Delgado, J. J., Lintinen, K., Kostiainen, M. A., Wiedmer, S. Κ., Österberg, M., & Mattinen, M. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00676 · Cited by 95
Kai, D., Zhang, K., Liow, S. S., & Loh, X. J. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00445 · Cited by 93
Strong and biocompatible lignin /poly (3-hydroxybutyrate) composite nanofibers
Kai, D., Chong, H. M., Chow, L. P., Lu, J., Lin, Q., Zhang, K., Zhang, H., Zhang, Z., & Loh, X. J. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.01.046 · Cited by 88
Kłapiszewski, Ł., Bula, K., Sobczak, M., & Jesionowski, T. (2016) · International Journal of Polymer Science · doi:10.1155/2016/1627258 · Cited by 84
Saenghirunwattana, P., Noomhorm, A., & Rungsardthong, V. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.06.010 · Cited by 82
Salazar, S. A., Cerruti, P., Medina‐Juárez, L. Á., Scarinzi, G., Malinconico, M., Soto‐Valdez, H., & Gámez‐Meza, N. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.04.120 · Cited by 82
Biodegradable polycaprolactone-based composites reinforced with ramie and borassus fibres
Fabrizio Sarasini, A., Tirillò, J., Puglia, D., Dominici, F., Santulli, C., Boimau, K., Valente, T., & Torre, L. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.01.071 · Cited by 80
Water absorption and hydrothermal performance of PHBV/sisal biocomposites
Badia-Valiente, J. D., Kittikorn, T., Strömberg, E., Santonja‐Blasco, L., Martínez-Felipe, A., Ribes-Greus, A., Ek, M., & Karlsson, S. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.04.012 · Cited by 79
Lin, Y., Xia, X., Shang, K., Elia, R., Huang, W., Cebe, P., Leisk, G. G., Omenetto, F. G., & Kaplan, D. L. (2013) · Biomacromolecules · doi:10.1021/bm4004892 · Cited by 77
Dhakal, H. N., Ismail, S. O., Zhang, Z., Barber, A. H., Welsh, E., Maigret, J., & Beaugrand, J. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.08.005 · Cited by 77
Preparation and drug release properties of lignin–starch biodegradable films
Çalgeris, İ., Çakmakçı, E., Ogan, A., Kahraman, M. V., & Kayaman‐Apohan, N. (2012) · Starch - Stärke · doi:10.1002/star.201100158 · Cited by 76
Effects of lignin as a filler on properties of soy protein plastics. I. Lignosulfonate
Huang, J. T., Zhang, L., & Chen, F. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12185 · Cited by 74
Abral, H., Putra, G. J., Asrofi, M., Park, J., & Kim, H. (2017) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2017.08.019 · Cited by 74
Biocomposites based on lignin and plasticized poly( L ‐lactic acid)
Rahman, M. A., Santis, D. D., Spagnoli, G., Ramorino, G., Penco, M., Phuong, V. T., & Lazzeri, A. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38705 · Cited by 73
Effect of Supramolecular Structures on Thermoplastic Zein–Lignin Bionanocomposites
Oliviero, M., Verdolotti, L., Maio, E. D., Aurilia, M., & Iannace, S. (2011) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf201728p · Cited by 73
Angelini, S., Cerruti, P., Immirzi, B., Santagata, G., Scarinzi, G., & Malinconico, M. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.07.038 · Cited by 70
Lennartsson, P. R., Niklasson, C., & Taherzadeh, M. J. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.12.089 · Cited by 67
Classification of Lignin According to Chemical and Molecular Structure
Glasser, W. G. (1999) · ACS symposium series · doi:10.1021/bk-2000-0742.ch009 · Cited by 64
Berthet, M.-A., Commandré, J.-M., Rouau, X., Gontard, N., & Angellier‐Coussy, H. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.12.034 · Cited by 61
Biocomposites based on poly(butylene succinate) and curaua: Mechanical and morphological properties
Frollini, E., Bartolucci, N., Sisti, L., & Celli, A. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.06.009 · Cited by 59
Effect of Fiber Orientation on Mechanical Properties of Kenaf-Reinforced Polymer Composite
Yong, C. K., Ching, Y. C., Chuah, C. H., & Liou, N.-S. (2015) · BioResources · doi:10.15376/biores.10.2.2597-2608 · Cited by 55
Self-citationNew flax producing bioplastic fibers for medical purposes
Kulma, A., Skórkowska‐Telichowska, K., Kostyń, K., Szatkowski, M., Skała, J., Drulis‐Kawa, Z., Preisner, M., Żuk, M., Szperlik, J., Wang, Y. F., et al. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.09.013 · Cited by 55
Niu, Y., Zhang, X., He, X. C., Zhao, J., Zhang, W., & Lu, C. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.09.042 · Cited by 52
Chile, L.-E., Kaser, S. J., Hatzikiriakos, S. G., & Mehrkhodavandi, P. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02866 · Cited by 50
Ali, M. E., Yong, C. K., Ching, Y. C., Chuah, C. H., & Liou, N.-S. (2014) · BioResources · doi:10.15376/biores.10.1.822-838 · Cited by 47
Self-citationModification of Eucalyptus and Spruce organosolv lignins with fatty acids to use as filler in PLA
Gordobil, O., Egüés, I., & Labidi, J. (2016) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2016.05.002 · Cited by 45
Fractionation of Soda Pulp Lignin in Aqueous Solvent through Membrane-Assisted Ultrafiltration
Allegretti, C., Fontanay, S., Krauke, Y., Luebbert, M., Strini, A., Troquet, J., Turri, S., Griffini, G., & D’Arrigo, P. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01410 · Cited by 44
Kaewtatip, K., Menut, P., Auvergne, R., Tanrattanakul, V., Morel, M., & Guilbert, S. (2010) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf9042776 · Cited by 43
Holmgren, A., Brunow, G., Henriksson, G., Zhang, L., & Ralph, J. (2006) · Organic & Biomolecular Chemistry · doi:10.1039/b606369a · Cited by 43
de Miranda, C. S., Ferreira, M. S., Magalhães, M. T. Q., Gonçalves, A. P. B., de Oliveira, J. C., da Silva, J. B. A., & José, N. M. (2015) · Materials Today Proceedings · doi:10.1016/j.matpr.2015.04.038 · Cited by 41
Silane-treated lignocellulosic fibers as reinforcement material in polylactic acid biocomposites
González, D., Santos, V., & Parajó, J. C. (2011) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711417029 · Cited by 35
Molecular weight-functional group relations in softwood residual kraft lignins
Koda, K., Koda, K., Gaspar, A. R., Yu, L., Yu, L., Yu, L., & Argyropoulos, D. S. (2005) · Holzforschung · doi:10.1515/hf.2005.099 · Cited by 33
Nanda, S., Maley, J. M., Koziński, J. A., et al. (2015) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2015.1529 · Cited by 31
A Review on The Bioconversion of Lignin to Microbial Lipid with Oleaginous Rhodococcus opacus
Mahan, K. M., Le, R. K., Yuan, J. S., & Ragauskas, A. J. (2017) · Journal of Biotechnology & Biomaterials · doi:10.4172/2155-952x.1000262 · Cited by 31
Narkchamnan, S., & Sakdaronnarong, C. K. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.046 · Cited by 27
Sakunkittiyut, Y., Kunanopparat, T., Menut, P., & Siriwattanayotin, S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37899 · Cited by 26
Surface Modification of Natural Fiber using Bi2O3/TiO2 Composite for Photocatalytic Self-cleaning
Rahman, M. A., Ching, Y. C., Ching, K. Y., Awanis, N., Ak, C., Chuah, C. H., & Liou, N.-S. (2015) · BioResources · doi:10.15376/biores.10.4.7405-7418 · Cited by 25
Self-citationHigh toughness hybrid biocomposite process optimization
Hajiha, H., & Sain, M. M. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.03.002 · Cited by 23
Improving wheat gluten materials properties by Kraft lignin addition
Kunanopparat, T., Menut, P., Morel, M., & Guilbert, S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.35345 · Cited by 22
Preparation and properties of poly(lactic acid)/cellulolytic enzyme lignin/PGMA ternary blends
Ouyang, W. Z., Huang, Y., Luo, H. J., & Wang, D. S. (2012) · Chinese Chemical Letters · doi:10.1016/j.cclet.2011.11.023 · Cited by 21
[Lignin: Chemical structure, biodegradation, and practical application].
Феофилова, Е. П., & Mysyakina, I. S. (2016) · PubMed · Cited by 14
Lewis, A., Waters, J. C., Stanton, J., Hess, J., & la Cruz, D. S. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms17121989 · Cited by 13
Water Uptake Behavior of Lignin Modified Starch Film
Sarwono, A., Man, Z. B., Bustam, M. A., & Azizli, K. A. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.699.204 · Cited by 9
Mohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Cited by
A strong, biodegradable and recyclable lignocellulosic bioplastic
Xia, Q., Chen, C., Yao, Y., Li, J., He, S., Zhou, Y., Li, T., Pan, X., Yao, Y., & Hu, L. (2021) · Nature Sustainability · doi:10.1038/s41893-021-00702-w · Cited by 759
Asgher, M., Qamar, S. A., Bilal, M., & Iqbal, H. M. N. (2020) · Food Research International · doi:10.1016/j.foodres.2020.109625 · Cited by 721
Das, A., Ringu, T., Ghosh, S., & Pramanik, N. (2023) · Polymer Bulletin · doi:10.1007/s00289-022-04443-4 · Cited by 380
Advantages and Disadvantages of Bioplastics Production from Starch and Lignocellulosic Components
Abe, M. M., Martins, J. R., Sanvezzo, P. B., Macedo, J. V., Branciforti, M. C., Halley, P., Botaro, V. R., & Brienzo, M. (2021) · Polymers · doi:10.3390/polym13152484 · Cited by 269
Food Packaging Materials with Special Reference to Biopolymers-Properties and Applications
Agarwal, A., Shaida, B., Rastogi, M., & Singh, N. B. (2023) · Chemistry Africa · doi:10.1007/s42250-022-00446-w · Cited by 259
Metadata
- Authors
- Yang, J., Ching, Y., & Chuah, C.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2019-04-28
- Volume
- 11
- Issue
- 5
- Pages
- 751
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2941176280
- Cited by
- 438
- References
- 117
- FWCI
- 20.01
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
