The DOI matches its Crossref record; 117 of the 117 references it cites were found in a registry or an index.
Applications of Lignocellulosic Fibers and Lignin in Bioplastics: A Review
Open accessAbstract
Lignocellulosic fibers and lignin are two of the most important natural bioresources in the world. They show tremendous potential to decrease energy utilization/pollution and improve biodegradability by replacing synthetic fibers in bioplastics. The compatibility between the fiber-matrix plays an important part in the properties of the bioplastics. The improvement of lignocellulosic fiber properties by most surface treatments generally removes lignin. Due to the environmental pollution and high cost of cellulose modification, focus has been directed toward the use of lignocellulosic fibers in bioplastics. In addition, lignin-reinforced bioplastics are fabricated with varying success. These applications confirm there is no need to remove lignin from lignocellulosic fibers when preparing the bioplastics from a technical point of view. In this review, characterizations of lignocellulosic fibers and lignin related to their applications in bioplastics are covered. Then, we generalize the developments and problems of lignin-reinforced bioplastics and modification of lignin to improve the interaction of lignin-matrix. As for lignocellulosic fiber-reinforced bioplastics, we place importance on the low compatibility of the lignocellulosic fiber–matrix. The applications of lignin-containing cellulose and lignocellulosic fibers without delignification in the bioplastics are reviewed. A comparison between lignocellulosic fibers and lignin in the bioplastics is given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
Bright Side of Lignin Depolymerization: Toward New Platform Chemicals
Sun, Z., Fridrich, B., de Santi, A., Elangovan, S., & Barta, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00588 · Cited by 2,191
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058
Biodegradation and biological treatments of cellulose, hemicellulose and lignin: an overview
Pérez, J., Muñoz-Dorado, J., de la Rubia, T., & Martínez, J. (2002) · International Microbiology · doi:10.1007/s10123-002-0062-3 · Cited by 1,717
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
Progress in Green Polymer Composites from Lignin for Multifunctional Applications: A Review
Thakur, V. K., Thakur, M. K., Raghavan, P., & Kessler, M. R. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500087z · Cited by 1,398
Formic-acid-induced depolymerization of oxidized lignin to aromatics
Rahimi, A., Ulbrich, A., Coon, J. J., & Stahl, S. S. (2014) · Nature · doi:10.1038/nature13867 · Cited by 1,181
Value-adding to cellulosic ethanol: Lignin polymers
Doherty, W. O. S., Mousavioun, P., & Fellows, C. M. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.10.022 · Cited by 978
A review on lignin-based polymeric, micro- and nano-structured materials
Duval, A., & Lawoko, M. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.09.017 · Cited by 733
Challenges in industrial applications of technical lignins
Vishtal, A., & Kraslawski, A. (2011) · BioResources · doi:10.15376/biores.6.3.3547-3568 · Cited by 721
Cited by
Recent advances in biodegradable polymers for sustainable applications
Samir, A., Ashour, F. H., Hakim, A. A. A., & Bassyouni, M. (2022) · npj Materials Degradation · doi:10.1038/s41529-022-00277-7 · Cited by 1,209
Moshood, T. D., Nawanir, G., Mahmud, F., Mohamad, F., Ahmad, M. H., & AbdulGhani, A. (2022) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2022.100273 · Cited by 784
A strong, biodegradable and recyclable lignocellulosic bioplastic
Xia, Q., Chen, C., Yao, Y., Li, J., He, S., Zhou, Y., Li, T., Pan, X., Yao, Y., & Hu, L. (2021) · Nature Sustainability · doi:10.1038/s41893-021-00702-w · Cited by 759
Asgher, M., Qamar, S. A., Bilal, M., & Iqbal, H. M. N. (2020) · Food Research International · doi:10.1016/j.foodres.2020.109625 · Cited by 721
Ashokkumar, V., Venkatkarthick, R., Jayashree, S., Chuetor, S., Dharmaraj, S., Kumar, G., Chen, W.-H., & Ngamcharussrivichai, C. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2021.126195 · Cited by 681
Biodegradation of Wasted Bioplastics in Natural and Industrial Environments: A Review
Folino, A., Karageorgiou, A., Calabrò, P. S., & Komilis, D. (2020) · Sustainability · doi:10.3390/su12156030 · Cited by 489
Tyagi, P., Salem, K. S., Hubbe, M. A., & Pal, L. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.06.036 · Cited by 387
Das, A., Ringu, T., Ghosh, S., & Pramanik, N. (2023) · Polymer Bulletin · doi:10.1007/s00289-022-04443-4 · Cited by 380
Bioplastic from Renewable Biomass: A Facile Solution for a Greener Environment
Coppola, G., Gaudio, M. T., Lopresto, C. G., Calabro, V., Curcio, S., & Chakraborty, S. (2021) · Earth Systems and Environment · doi:10.1007/s41748-021-00208-7 · Cited by 362
The role of lignin and lignin-based materials in sustainable construction – A comprehensive review
Jędrzejczak, P., Collins, M. N., Jesionowski, T., & Klapiszewski, Ł. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.07.125 · Cited by 339
Lignocellulosic Agricultural Waste Valorization to Obtain Valuable Products: An Overview
Blasi, A., Verardi, A., Lopresto, C. G., Siciliano, S., & Sangiorgio, P. (2023) · Recycling · doi:10.3390/recycling8040061 · Cited by 338
Recent advances in biodegradable polymers – Properties, applications and future prospects
Mukherjee, C., Varghese, D., Krishna, J. S., Boominathan, T., Rakeshkumar, R., Dineshkumar, S., Brahmananda Rao, C. V. S., & Sivaramakrishna, A. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112068 · Cited by 321
Multifunctional lignin-based nanocomposites and nanohybrids
Lizundia, E., Sipponen, M. H., Greca, L. G., Balakshin, M., Tardy, B. L., Rojas, O. J., & Puglia, D. (2021) · Green Chemistry · doi:10.1039/d1gc01684a · Cited by 293
Advantages and Disadvantages of Bioplastics Production from Starch and Lignocellulosic Components
Abe, M. M., Martins, J. R., Sanvezzo, P. B., Macedo, J. V., Branciforti, M. C., Halley, P., Botaro, V. R., & Brienzo, M. (2021) · Polymers · doi:10.3390/polym13152484 · Cited by 269
Food Packaging Materials with Special Reference to Biopolymers-Properties and Applications
Agarwal, A., Shaida, B., Rastogi, M., & Singh, N. B. (2023) · Chemistry Africa · doi:10.1007/s42250-022-00446-w · Cited by 259
Review on biomass gasification: Gasifiers, gasifying mediums, and operational parameters
Mishra, S., & Upadhyay, R. K. (2021) · Materials Science for Energy Technologies · doi:10.1016/j.mset.2021.08.009 · Cited by 257
Farghali, M., Mohamed, I. M. A., Osman, A. I., & Rooney, D. W. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01520-y · Cited by 225
Pulp and paper mill wastes: utilizations and prospects for high value-added biomaterials
Haile, A., Gelebo, G. G., Tesfaye, T., Mengie, W., Mebrate, M. A., Abuhay, A., & Limeneh, D. Y. (2021) · Bioresources and Bioprocessing · doi:10.1186/s40643-021-00385-3 · Cited by 223
Applications of Compounds from Coffee Processing By-Products
Iriondo-DeHond, A., Iriondo-DeHond, M., & del Castillo, M. D. (2020) · Biomolecules · doi:10.3390/biom10091219 · Cited by 167
Deep eutectic solvents for biotechnology applications
Morozova, O. V., Vasil’eva, I. S., Shumakovich, G. P., Zaitseva, E. A., & Yaropolov, A. I. (2023) · Biochemistry (Moscow) · doi:10.1134/s0006297923140092 · Cited by 41
Metadata
- Authors
- Yang, J., Ching, Y., & Chuah, C.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2019-04-28
- Volume
- 11
- Issue
- 5
- Pages
- 751
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2941176280
- Cited by
- 438
- References
- 117
- FWCI
- 20.01
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.