Hydrophilic Molecularly Imprinted Chitosan Based on Deep Eutectic Solvents for the Enrichment of Gallic Acid in Red Ginseng Tea
Open accessThe DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
Hydrophilic molecularly imprinted chitosan (HMICS) were synthesized based on hydrophilic deep eutectic solvents (DESs) and the DESs was used as both a template and functional monomer for the enrichment of gallic acid (GA) from red ginseng tea using a solid phase microextraction (SPME) method. Using the response surface methodology (RSM) strategy, the optimal extraction amount (8.57 mg·g−1) was found to be an extraction time of 30 min, a solid to liquid ratio of 20 mg·mL−1, and five adsorption/desorption cycles. Compared to traditional methods, the produced HMICS-SPME exhibited the advantages of simplicity of operation, higher recovery and selectivity, improved analytical characteristics and reduced sample and reagent consumption, and it is expected to promote the rapid development and wide applications of molecular imprinting.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures









Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“From the three different molar ratios studied in this work, the best was ChCl-Gallic acid (1:2), as it was the only one that had a stable form.”
From Microextraction Techniques with Deep Eutectic Solvents (2020) · cites this paper as [63]
The cited source says what the claim attributes to it.
In the citing paper
“The adsorption capacity of gallic acid on HMICS with DES was 10.13 mg/g, 2.36 times higher than that of NICS (non-imprinted chitosan) without DES [63].”
From Microextraction Techniques with Deep Eutectic Solvents (2020) · cites this paper as [63]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Natural deep eutectic solvents: Properties, applications, and perspectives
Liu, Y., Friesen, J. B., McAlpine, J. B., Lankin, D. C., Chen, S.-N., & Pauli, G. F. (2018) · Journal of Natural Products · doi:10.1021/acs.jnatprod.7b00945 · Cited by 1,304 · cited 1×
“DESs are a eutectic mixture of a quaternary ammonium salt as a hydrogen bond acceptor (HBA) with either the organic amine, alcohol, or organic acid as the hydrogen bond donor (HBD) [21], which are characterized by a melting point lower than those of each individual component.”
BackgroundA review on chitosan and its nanocomposites in drug delivery
Ali, A., & Ahmed, S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.12.078 · Cited by 1,127
Pharmacological effects of gallic acid in health and diseases: A mechanistic review.
Kahkeshani, N., Farzaei, F., Fotouhi, M., Alavi, S. S., Bahramsoltani, R., Naseri, R., Momtaz, S., Abbasabadi, Z., Rahimi, R., Farzaei, M. H., et al. (2019) · PubMed · doi:10.22038/ijbms.2019.32806.7897 · Cited by 652
Elgadir, M. A., Uddin, M. S., Ferdosh, S., Adam, A., Chowdhury, A. J. K., & Sarker, M. Z. I. (2015) · Journal of Food and Drug Analysis · doi:10.1016/j.jfda.2014.10.008 · Cited by 536
Inflammation and Oxidative Stress in an Obese State and the Protective Effects of Gallic Acid
Dludla, P. V., Nkambule, B. B., Jack, B., Mkandla, Z., Mutize, T., Silvestri, S., Orlando, P., Tiano, L., Louw, J., & Mazibuko-Mbeje, S. E. (2018) · Nutrients · doi:10.3390/nu11010023 · Cited by 286 · cited 1×
“GA is used in the pharmaceutical and biomedical industries owing to their anti-oxidant, anti-inflammatory, anti-cancer, and anti-viral activities [3,4].”
BackgroundWang, B., Bai, Z., Jiang, H., Prinsen, P., Luque, R., Zhao, S., & Xuan, J. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.10.024 · Cited by 169 · cited 1×
“CS can be modified mainly using its amine group, by crosslinking reactions to make it insoluble in acidic pH or by grafting new functional groups to the amine and hydroxyl groups to add new chemical properties and improve the selectivity for the targets [9].”
BackgroundWang, R., Li, W., & Chen, Z. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.02.024 · Cited by 132 · cited 1×
“In molecular imprinting techniques, deep eutectic solvents (DESs) has been used as the solvent for template elution and additive in the preparation of imprinting materials for higher adsorption capacity, acting as monomers [18], solvents [19], or others [20].”
MethodKhan, A., Aqil, M., Imam, S. S., Ahad, A., Sultana, Y., Ali, A., & Khan, K. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.05.079 · Cited by 110
Pardeshi, S., Dhodapkar, R., & Kumar, A. (2013) · Food Chemistry · doi:10.1016/j.foodchem.2013.09.084 · Cited by 104
Molecularly Imprinted Materials for Selective Biological Recognition
Zhang, N., Zhang, N., Xu, Y., Li, Z., Yan, C., Mei, K., Ding, M., Ding, S., Guan, P., Qian, L., et al. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900096 · Cited by 103 · cited 1×
“Currently, the molecular imprinting technique has attracted increasing attention for the production of artificial materials with selective recognition for the target molecules [11].”
BackgroundZhang, W., Li, Q., Mao, Q., & He, G. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.01.032 · Cited by 91
Xu, K., Wang, Y., Wei, X., Chen, J., Xu, P., & Zhou, Y. (2018) · Microchimica Acta · doi:10.1007/s00604-018-2707-8 · Cited by 84 · cited 1×
“Recently, some efforts have been made to introduce DESs in the fields of molecular imprinting [22] and for the separation of bioactive compounds because of their unique properties, including low vapor pressure, easy preparation, and benign biodegradability [23].”
BackgroundRecent Applications of Molecularly Imprinted Polymers (MIPs) on Micro-extraction Techniques
Li, G., & Row, K. H. (2017) · Separation and Purification Reviews · doi:10.1080/15422119.2017.1315823 · Cited by 66 · cited 1×
“Practical molecular imprinting materials (MIMs) have become a rapidly evolving research area, providing key factors for understanding the separation, recognition, and regenerative properties toward biological molecules [16].”
BackgroundSelf-citationZhou, T., Ding, J. F., He, Z., Li, J., Liang, Z., Li, C., Li, Y., Chen, Y., & Ding, L. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.185 · Cited by 61 · cited 1×
“With different kinds of imprinting methods, many products of the molecular imprinting technique have been shown with excellent selectivity and unique structural predictability, such as molecularly imprinted polymers (MIPs) [12], molecular imprinted resins (MIRs) [13,14], and molecular imprinted nanoparticles (MINs) [1…”
BackgroundPuoci, F., Scoma, A., Cirillo, G., Bertin, L., Fava, F., & Picci, N. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.05.095 · Cited by 48
Fu, N., Liu, X., Li, L., Tang, B., & Row, K. H. (2017) · Journal of Separation Science · doi:10.1002/jssc.201700146 · Cited by 45 · cited 1×
“Recently, some efforts have been made to introduce DESs in the fields of molecular imprinting [22] and for the separation of bioactive compounds because of their unique properties, including low vapor pressure, easy preparation, and benign biodegradability [23].”
BackgroundZhang, J., Li, B., Yue, H., Wang, J., & Zheng, Y. (2017) · Journal of Separation Science · doi:10.1002/jssc.201700822 · Cited by 42 · cited 1×
“Gallic acid (GA) is one of the major polyphenolic compounds in plants, such as green tea, vegetables and fruits [1,2].”
BackgroundLi, G., & Row, K. H. (2018) · Journal of Separation Science · doi:10.1002/jssc.201800222 · Cited by 42 · cited 1×
“With different kinds of imprinting methods, many products of the molecular imprinting technique have been shown with excellent selectivity and unique structural predictability, such as molecularly imprinted polymers (MIPs) [12], molecular imprinted resins (MIRs) [13,14], and molecular imprinted nanoparticles (MINs) [1…”
BackgroundSelf-citationIsolation of transferrin by imprinted nanoparticles with magnetic deep eutectic solvents as monomer
Zhang, Y., Cao, H., Huang, Q., Liu, X., & Zhang, H. (2018) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-018-1232-2 · Cited by 41 · cited 1×
“In molecular imprinting techniques, deep eutectic solvents (DESs) has been used as the solvent for template elution and additive in the preparation of imprinting materials for higher adsorption capacity, acting as monomers [18], solvents [19], or others [20].”
MethodMoreira, A. L. D. S. L., Pereira, A. D. S., Speziali, M. G., Novack, K. M., Gurgel, L. V. A., & Gil, L. F. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.08.055 · Cited by 37 · cited 1×
“Moreover, CS is an eco-friendly and cost-effective biopolymer that can be modified easily by various chemical reactions to improve its physicochemical properties [8].”
BackgroundLi, G., & Row, K. H. (2018) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-018-1406-y · Cited by 36 · cited 1×
“In molecular imprinting techniques, deep eutectic solvents (DESs) has been used as the solvent for template elution and additive in the preparation of imprinting materials for higher adsorption capacity, acting as monomers [18], solvents [19], or others [20].”
MethodSelf-citationLi, H., Long, R., Tong, C., Li, T., Liu, Y., & Shi, S. (2018) · Talanta · doi:10.1016/j.talanta.2018.10.099 · Cited by 32 · cited 1×
“With different kinds of imprinting methods, many products of the molecular imprinting technique have been shown with excellent selectivity and unique structural predictability, such as molecularly imprinted polymers (MIPs) [12], molecular imprinted resins (MIRs) [13,14], and molecular imprinted nanoparticles (MINs) [1…”
BackgroundChen, X., Zhao, Y., Zhang, Y., Lu, A., Li, X., Liu, L., Qin, G., Fang, Z., Zhang, J., & Liu, Y. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.11.104 · Cited by 26 · cited 1×
“With the addition of new functional groups on CS, it is possible to increase the number of adsorption sites [10].”
BackgroundYuan, Y., Yang, C., Lv, T., Qiao, F., Zhou, Y. M., & Yan, H. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.06.009 · Cited by 25 · cited 1×
“For further applications, however, MIMs should have good water compatibility because many targeted molecules are present in the aqueous biological matrix [17].”
BackgroundGhaeni, F. A., Karimi, G., Mohsenzadeh, M. S., Nazarzadeh, M., Motamedshariaty, V. S., & Mohajeri, S. A. (2018) · Separation Science and Technology · doi:10.1080/01496395.2018.1461112 · Cited by 18 · cited 1×
“With different kinds of imprinting methods, many products of the molecular imprinting technique have been shown with excellent selectivity and unique structural predictability, such as molecularly imprinted polymers (MIPs) [12], molecular imprinted resins (MIRs) [13,14], and molecular imprinted nanoparticles (MINs) [1…”
Background
Research works printed but not linked: 1
- Sharifi, 2018, A Systematic Review of the Potential Gallic Acid Effective in Liver Oxidative Stress in Rats, J. Med. Res., 4, 5
Cited by
Li, L., Liu, Y., Wang, Z., Yang, L., & Liu, H. (2020) · Journal of Separation Science · doi:10.1002/jssc.202000523 · Cited by 94
The Use of Computational Methods for the Development of Molecularly Imprinted Polymers
Nicholls, I. A., Golker, K., Olsson, G. D., Suriyanarayanan, S., & Wiklander, J. G. (2021) · Polymers · doi:10.3390/polym13172841 · Cited by 89
Microextraction Techniques with Deep Eutectic Solvents
Plastiras, O.-E., Andreasidou, E., & Samanidou, V. (2020) · Molecules · doi:10.3390/molecules25246026 · Cited by 84
“36 times higher than that of NICS (non-imprinted chitosan) without DES [63].”
BackgroundMadikizela, L. M., Ncube, S., Nomngongo, P. N., & Pakade, V. E. (2022) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2022.119696 · Cited by 67
Moreira, A. L. D. S. L., Pereira, A. D. S., Speziali, M. G., Novack, K. M., Gurgel, L. V. A., & Gil, L. F. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.08.055 · Cited by 37
Metadata
- Authors
- Li, G., & Rwo, K. H.
- Affiliations
- Inha University (KR)
- Corresponding author
- Rwo, Kyung Ho
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2019-09-01
- Volume
- 11
- Issue
- 9
- Pages
- 1434
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC6780181
- OpenAlex
- W2970749039
- Cited by
- 24
- References
- 25
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 4 · 2023: 3 · 2022: 4 · 2021: 2 · 2020: 3 · 2019: 1
- FWCI
- 1.40
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- This study was supported by the National Research Foundation of Korea (NRF) grant funded by Korea Government (MSIT) (No.NRF-2019R1A2C1010032)
- Topics
- Physical Sciences › Chemistry › Analytical Chemistry › Analytical chemistry methods development
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Ionic liquids properties and applications
- Physical Sciences › Chemistry › Analytical Chemistry › Analytical Chemistry and Chromatography
- Keywords
- deep eutectic solvents, gallic acid, solid-phase microextraction, sample enrichment, molecular imprinting, extraction optimization, tea polyphenols
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.