The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Production of Sustainable and Biodegradable Polymers from Agricultural Waste
Open accessAbstract
Agro-wastes are derived from diverse sources including grape pomace, tomato pomace, pineapple, orange, and lemon peels, sugarcane bagasse, rice husks, wheat straw, and palm oil fibers, among other affordable and commonly available materials. The carbon-rich precursors are used in the production bio-based polymers through microbial, biopolymer blending, and chemical methods. The Food and Agriculture Organization (FAO) estimates that 20–30% of fruits and vegetables are discarded as waste during post-harvest handling. The development of bio-based polymers is essential, considering the scale of global environmental pollution that is directly linked to the production of synthetic plastics such as polypropylene (PP) and polyethylene (PET). Globally, 400 million tons of synthetic plastics are produced each year, and less than 9% are recycled. The optical, mechanical, and chemical properties such as ultraviolet (UV) absorbance, tensile strength, and water permeability are influenced by the synthetic route. The production of bio-based polymers from renewable sources and microbial synthesis are scalable, facile, and pose a minimal impact on the environment compared to chemical synthesis methods that rely on alkali and acid treatment or co-polymer blending. Despite the development of advanced synthetic methods and the application of biofilms in smart/intelligent food packaging, construction, exclusion nets, and medicine, commercial production is limited by cost, the economics of production, useful life, and biodegradation concerns, and the availability of adequate agro-wastes. New and cost-effective production techniques are critical to facilitate the commercial production of bio-based polymers and the replacement of synthetic polymers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Microbial strategies for bio-transforming food waste into resources
Sharma, P., Gaur, V. K., Kim, S.-H., & Pandey, A. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122580 · Cited by 389
RetractedHahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Biodegradable composites based on lignocellulosic fibers—An overview
Satyanarayana, K. G., Arizaga, G. G. C., & Wypych, F. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.002 · Cited by 1,421
Vroman, I., & Tighzert, L. (2009) · Materials · doi:10.3390/ma2020307 · Cited by 1,355
Agro-industrial wastes and their utilization using solid state fermentation: A review
Sadh, P. K., Duhan, S., & Duhan, J. S. (2018) · Bioresources and Bioprocessing · doi:10.1186/s40643-017-0187-z · Cited by 1,302
Biodegradation of bioplastics in natural environments
Emadian, S. M., Onay, T. T., & Demirel, B. (2017) · Waste Management · doi:10.1016/j.wasman.2016.10.006 · Cited by 1,168
Biodegradable and Bio‐Based Polymers: Future Prospects of Eco‐Friendly Plastics
Iwata, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410770 · Cited by 937
Bacterial polymers: biosynthesis, modifications and applications
Rehm, B. H. A. (2010) · Nature Reviews Microbiology · doi:10.1038/nrmicro2354 · Cited by 899
Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
Anjum, A., Zuber, M., Zia, K. M., Noreen, A., Anjum, M. N., & Tabasum, S. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.04.069 · Cited by 665
Losses, inefficiencies and waste in the global food system
Alexander, P., Brown, C., Arneth, A., Finnigan, J., Moran, D., & Rounsevell, M. D. A. (2017) · Agricultural Systems · doi:10.1016/j.agsy.2017.01.014 · Cited by 524
Biodegradable polymers and green-based antimicrobial packaging materials: A mini-review
Zhong, Y., Godwin, P., Jin, Y., & Xiao, H. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2019.11.002 · Cited by 509
Väisänen, T., Haapala, A., Lappalainen, R., & Tomppo, L. (2016) · Waste Management · doi:10.1016/j.wasman.2016.04.037 · Cited by 490
Production of bioplastic through food waste valorization
Tsang, Y. F., Kumar, V., Samadar, P., Yang, Y., Lee, J., Ok, Y. S., Song, H., Kim, K.-H., Kwon, E. E., & Jeon, Y. J. (2019) · Environment International · doi:10.1016/j.envint.2019.03.076 · Cited by 480
Bio-based and biodegradable polymers - State-of-the-art, challenges and emerging trends
RameshKumar, S., Shaiju, P., O'Connor, K. E., & P, R. B. (2020) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2019.12.005 · Cited by 479
Life cycle assessments of biodegradable, commercial biopolymers—A critical review
Yates, M. R., & Barlow, C. Y. (2013) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.06.010 · Cited by 441
Eco-friendly polymer composites for green packaging: Future vision and challenges
Moustafa, H., Youssef, A. M., Darwish, N. A., & Abou-Kandil, A. I. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.05.048 · Cited by 381
Gontard, N., Sonesson, U., Birkved, M., Majone, M., Bolzonella, D., Celli, A., Angellier-Coussy, H., Jang, G.-W., Verniquet, A., Broeze, J., et al. (2018) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2018.1471957 · Cited by 363
Mellinas, C., Ramos, M., Jiménez, A., & Garrigós, M. C. (2020) · Materials · doi:10.3390/ma13030673 · Cited by 362
A new circular business model typology for creating value from agro-waste
Donner, M., Gohier, R., & de Vries, H. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.137065 · Cited by 314
Production of Sustainable Construction Materials Using Agro-Wastes
Maraveas, C. (2020) · Materials · doi:10.3390/ma13020262 · Cited by 293
Self-citationDesigning Biobased Recyclable Polymers for Plastics
Hatti-Kaul, R., Nilsson, L. J., Zhang, B., Rehnberg, N., & Lundmark, S. (2020) · Trends in Biotechnology · doi:10.1016/j.tibtech.2019.04.011 · Cited by 286
Kapferer, J.-N., & Laurent, G. (2016) · Journal of Business Research · doi:10.1016/j.jbusres.2015.08.005 · Cited by 279
Electrospinning and electrospray of bio-based and natural polymers for biomaterials development
Soares, R. M. D., Siqueira, N. M., Prabhakaram, M. P., & Ramakrishna, S. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.08.004 · Cited by 265
Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Atikah, M. S. N., Mohd Nurazzi, N., Atiqah, A., Ansari, M. N. M., et al. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.08.028 · Cited by 250
Properties and applications of compostable starch-based plastic material
Lörcks, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00168-7 · Cited by 229
Luchese, C. L., Sperotto, N., Spada, J. C., & Tessaro, I. C. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.05.149 · Cited by 205
Diacono, M., Persiani, A., Testani, E., Montemurro, F., & Ciaccia, C. (2019) · Sustainability · doi:10.3390/su11143824 · Cited by 202
Mathiot, C., Ponge, P., Gallard, B., Sassi, J.-F., Delrue, F., & Le Moigne, N. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.12.057 · Cited by 196
Tabasum, S., Younas, M., Zaeem, M. A., Majeed, I., Majeed, M., Noreen, A., Iqbal, M. N., & Zia, K. M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.10.092 · Cited by 195
Towards sustainability of lactic acid and poly-lactic acid polymers production
Djukić-Vuković, A., Mladenović, D., Ivanović, J., Pejin, J., & Mojović, L. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.050 · Cited by 193
Characterization of starch-based bioplastics from jackfruit seed plasticized with glycerol
Santana, R. F., Bonomo, R. C. F., Gandolfi, O. R. R., Rodrigues, L. B., Santos, L. S., dos Santos Pires, A. C., de Oliveira, C. P., da Costa Ilhéu Fontan, R., & Veloso, C. M. (2018) · Journal of Food Science and Technology · doi:10.1007/s13197-017-2936-6 · Cited by 192
Briassoulis, D., & Dejean, C. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0168-1 · Cited by 174
Xie, Y., Niu, X., Yang, J., Fan, R., Shi, J., Ullah, N., Feng, X., & Chen, L. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.291 · Cited by 153
Evaluation of the functionality of bio-based plastic mulching films
Briassoulis, D., & Giannoulis, A. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.02.019 · Cited by 152
Khardenavis, A. A., SURESHKUMAR, M., Mudliar, S. N., & Chakrabarti, T. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2006.11.024 · Cited by 150
Rudnik, E., & Briassoulis, D. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0243-7 · Cited by 149
Sustainable Retailing – Influencing Consumer Behaviour on Food Waste
Young, C. W., Russell, S. V., Robinson, C. A., & Chintakayala, P. K. (2017) · Business Strategy and the Environment · doi:10.1002/bse.1966 · Cited by 144
Zhang, X., You, S., Tian, Y., & Li, J. (2019) · Scientia Horticulturae · doi:10.1016/j.scienta.2019.01.037 · Cited by 144
Waste green coconut shells: Diagnosis of the disposal and applications for use in other products
Nunes, L. A., Silva, M. L. S., Gerber, J. Z., & Kalid, R. D. A. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120169 · Cited by 137
Biodegradable Polymers: Opportunities and Challenges
Nayak, P. L. (1999) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1081/mc-100101425 · Cited by 135
Environmental Sustainability of Greenhouse Covering Materials
Maraveas, C. (2019) · Sustainability · doi:10.3390/su11216129 · Cited by 134
Self-citationFerri, M., Vannini, M., Ehrnell, M., Eliasson, L., Xanthakis, E., Monari, S., Sisti, L., Marchese, P., Celli, A., & Tassoni, A. (2020) · Journal of Advanced Research · doi:10.1016/j.jare.2020.02.015 · Cited by 125
Critical Review of Norms and Standards for Biodegradable Agricultural Plastics Part II: Composting
Briassoulis, D., Dejean, C., & Picuno, P. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0222-z · Cited by 112
Bedoić, R., Ćosić, B., & Duić, N. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.05.219 · Cited by 111
Cutin from agro-waste as a raw material for the production of bioplastics
Heredia-Guerrero, J. A., Heredia, A., Domínguez, E., Cingolani, R., Bayer, I. S., Athanassiou, A., & Benítez, J. J. (2017) · Journal of Experimental Botany · doi:10.1093/jxb/erx272 · Cited by 110
Bagde, P., & Vigneshwaran, N. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115021 · Cited by 104
Binoj, J. S., Raj, R. E., & Daniel, B. S. S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.09.179 · Cited by 101
Mapping of Agriculture Plastic Waste
Vox, G., Loisi, R. V., Blanco, I., et al. (2016) · Agriculture and Agricultural Science Procedia · doi:10.1016/j.aaspro.2016.02.080 · Cited by 99
Vegetable wastes derived polysaccharides as natural eco-friendly plasticizers of sodium alginate
Donato, P. D., Taurisano, V., Poli, A., d’Ayala, G. G., Nicolaus, B., Malinconinco, M., & Santagata, G. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115427 · Cited by 91
Vega‐Castro, O., Contreras‐Calderón, J., León, E., Segura, A. F., Arias, M., Pérez, L. D., & Sobral, P. J. D. A. (2016) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2016.06.018 · Cited by 87
Hablot, E., Dharmalingam, S., Hayes, D. G., Wadsworth, L. C., Blazy, C., & Narayan, R. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-014-0697-0 · Cited by 84
Mechanical behavior of agro‐residue‐reinforced polypropylene composites
Ashori, A., & Nourbakhsh, A. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.29345 · Cited by 82
Bashir, A., Jabeen, S., Gull, N., Islam, A., Sultan, M., Ghaffar, A., Khan, S. M., Iqbal, S. S., & Jamil, T. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.025 · Cited by 70
The Incorporation of Carvacrol into Poly (vinyl alcohol) Films Encapsulated in Lecithin Liposomes
Andrade, J., González‐Martínez, C., & Chiralt, A. (2020) · Polymers · doi:10.3390/polym12020497 · Cited by 60
Use of bio-based polymers in agricultural exclusion nets: A perspective
Mukherjee, A., Knoch, S., Chouinard, G., Tavares, J. R., & Dumont, M. (2019) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2019.01.017 · Cited by 58
A Review on Starch Based Nanocomposites for Bioplastic Materials
Bruno, Robert, Möse, Stephen, Moffat, & Maranga (2011) · Journal of Materials Science and Engineering B · Cited by 50
Valdés, A., Fenollar, O., Sanahuja, A. B., Balart, R., Fortunati, E., Kenny, J. M., & Garrigós, M. C. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.02.023 · Cited by 38
Heredia‐Guerrero, J. A., Caputo, G., Guzmán‐Puyol, S., Tedeschi, G., Heredia, A., Ceseracciu, L., Benitez, J. J., & Athanassiou, A. (2018) · Materials Today Sustainability · doi:10.1016/j.mtsust.2018.12.001 · Cited by 33
Mahmood, H., Moniruzzaman, M., Iqbal, T., & Yusup, S. B. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.09.106 · Cited by 31
A study on grafting poly(1,4-dioxan-2-one) onto starch via 2,4-tolylene diisocyanate
Rui-He, Wang, X., Wang, Y., Yang, K., Zeng, J., & Ding, S. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.11.031 · Cited by 28
Ecofriendly behavior of host matrix in composites prepared from agro‐waste and polypropylene
Pandey, J. K., Ahmad, A., & Singh, R. P. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12743 · Cited by 24
Kumar, A. P., Pandey, J. K., Kumar, B. P., et al. (2006) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0012-9 · Cited by 22
Biodegradable Polyester Materials Containing Gallates
Latos‐Brozio, M., & Masek, A. (2020) · Polymers · doi:10.3390/polym12030677 · Cited by 22
DeGruson, M. L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100596-5.03373-4 · Cited by 15
Evaluating the environmental cost of biofuels policy: An illustration with bioethanol
Valin, H., Dimaranan, B., & Bouët, A. (2010) · International Economics · doi:10.1016/s2110-7017(13)60031-1 · Cited by 4
Cited by
A review on poly lactic acid (PLA) as a biodegradable polymer
Taib, N.-A. A. B., Rahman, M. R., Huda, D., Kuok, K. K., Hamdan, S., Bakri, M. K. B., Julaihi, M. R. M. B., & Khan, A. (2023) · Polymer Bulletin · doi:10.1007/s00289-022-04160-y · Cited by 854
Dedieu, I., Peyron, S., Gontard, N., & Aouf, C. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107620 · Cited by 84
4D printing: Perspectives for the production of sustainable plastics for agriculture
Maraveas, C., Bayer, I. S., & Bartzanas, T. (2022) · Biotechnology Advances · doi:10.1016/j.biotechadv.2021.107785 · Cited by 63
Self-citationFood Loss and Food Waste for Green Cosmetics and Medical Devices for a Cleaner Planet
Morganti, P., Gao, X., Vukovic, N., Gagliardini, A., Lohani, A., & Morganti, G. (2022) · Cosmetics · doi:10.3390/cosmetics9010019 · Cited by 31
Metadata
- Authors
- Maraveas, C.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2020-05-14
- Volume
- 12
- Issue
- 5
- Pages
- 1127
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3026001940
- Cited by
- 423
- References
- 66
- FWCI
- 10.76
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.