The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Properties of Biodegradable Films Based on Poly(butylene Succinate) (PBS) and Poly(butylene Adipate-co-Terephthalate) (PBAT) Blends
Open accessAbstract
Compression molded biodegradable films based on poly(butylene succinate) (PBS) and poly(butylene adipate-co-terephthalate) (PBAT) at varying weights were prepared, and their relevant properties for packaging applications are here reported. The melt rheology of the blends was first studied, and the binary PBS/PBAT blends exhibited marked shear thinning and complex thermoreological behavior, due to the formation of a co-continuous morphology in the 50 wt% blend. The films were characterized by infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), mechanical tensile tests, scanning electron microscopy (SEM), and oxygen and water vapor permeability. PBS crystallization was inhibited in the blends with higher contents of PBAT, and FTIR and SEM analysis suggested that limited interactions occur between the two polymer phases. The films showed increasing stiffness as the PBS percentage increased; further, a sharp decrease in elongation at break was noticed for the films containing percentages of PBS greater than 25 wt%. Gas permeability decreased with increasing PBS content, indicating that the barrier properties of PBS can be tuned by blending with PBAT. The results obtained point out that the blend containing 25 wt% PBS is a good compromise between elastic modulus (135 MPa) and deformation at break (390%) values. Overall, PBS/PBAT blends represent an alternative for packaging films, as they combine biodegradability, good barrier properties and reasonable mechanical behavior.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ferreira, F. V., Cividanes, L. S., Gouveia, R. F., & Lona, L. M. F. (2019) · Polymer Engineering & Science · doi:10.1002/pen.24770 · Cited by 443
Arruda, L. C., Magaton, M., Bretas, R. E. S., & Ueki, M. M. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.02.005 · Cited by 397
Jalali Dil, E., Carreau, P. J., & Favis, B. D. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.012 · Cited by 158 · cited 7×
“with separate and independent crystallization of the components), dominated by the higher crystallinity components [17].”
BackgroundMethodInfluential
Cited by
Sustainable biodegradable coatings for food packaging: challenges and opportunities
Jahangiri, F., Mohanty, A. K., & Misra, M. (2024) · Green Chemistry · doi:10.1039/d3gc02647g · Cited by 299
Mujtaba, M., Lipponen, J., Ojanen, M., Puttonen, S., & Vaittinen, H. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.158328 · Cited by 283
Bumbudsanpharoke, N., Wongphan, P., Promhuad, K., Leelaphiwat, P., & Harnkarnsujarit, N. (2022) · Food Control · doi:10.1016/j.foodcont.2021.108541 · Cited by 156
Chuakhao, S., Rodríguez, J. T., Lapnonkawow, S., Kannan, G., Müller, A. J., & Suttiruengwong, S. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108383 · Cited by 73
Liu, S., Yang, D. S., Wang, S., Luan, H., Sekine, Y., Model, J. B., Aranyosi, A. J., Ghaffari, R., & Rogers, J. A. (2023) · EcoMat · doi:10.1002/eom2.12270 · Cited by 60
Metadata
- Authors
- de Matos Costa, A. R., Crocitti, A., Hecker de Carvalho, L., Carroccio, S. C., Cerruti, P., & Santagata, G.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2020-10-10
- Volume
- 12
- Issue
- 10
- Pages
- 2317
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3092577397
- Cited by
- 222
- References
- 3
- FWCI
- 5.27
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.