The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Potential of Natural Fiber Reinforced Polymer Composites in Sandwich Structures: A Review on Its Mechanical Properties
Open accessAbstract
The interest in using natural fiber reinforced composites is now at its highest. Numerous studies have been conducted due to their positive benefits related to environmental issues. Even though they have limitations for some load requirements, this drawback has been countered through fiber treatment and hybridization. Sandwich structure, on the other hand, is a combination of two or more individual components with different properties, which when joined together can result in better performance. Sandwich structures have been used in a wide range of industrial material applications. They are known to be lightweight and good at absorbing energy, providing superior strength and stiffness-to-weight ratios, and offering opportunities, through design integration, to remove some components from the core element. Today, many industries use composite sandwich structures in a range of components. Through good design of the core structure, one can maximize the strength properties, with a low density. However, the application of natural fiber composites in sandwich structures is still minimal. Therefore, this paper reviewed the possibility of using a natural fiber composite in sandwich structure applications. It addressed the mechanical properties and energy-absorbing characteristics of natural fiber-based sandwich structures tested under various compression loads. The results and potential areas of improvement to fit into a wide range of engineering applications were discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
A review on the degradability of polymeric composites based on natural fibres
Azwa, Z. N., Yousif, B. F., Manalo, A. C., & Karunasena, W. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.11.025 · Cited by 1,530
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Chen, W., Yu, H., Liu, Y., Chen, P., Zhang, M., & Hai, Y. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.10.040 · Cited by 971
A review on dynamic mechanical properties of natural fibre reinforced polymer composites
Saba, N., Jawaid, M., Alothman, O. Y., & Paridah, M. T. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.075 · Cited by 962
Multifunctional periodic cellular metals
Wadley, H. N. G. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1697 · Cited by 919
Kenaf reinforced biodegradable composite
Nishino, T., Hirao, K., Kotera, M., Nakamae, K., & Inagaki, H. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00099-x · Cited by 676
Shah, D. U. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7458-7 · Cited by 532
Alavudeen, A., Rajini, N., Karthikeyan, S., Thiruchitrambalam, M., & Venkateshwaren, N. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.10.067 · Cited by 493
Compressive response of open-cell foams. Part I: Morphology and elastic properties
Gong, L., Kyriakides, S., & Jang, W.-Y. (2005) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2004.07.023 · Cited by 473
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.002 · Cited by 448
Self-citationMicro- and Nanocellulose in Polymer Composite Materials: A Review
Omran, A. A. B., Mohammed, A. A. B. A., Sapuan, S. M., Ilyas, R. A., Asyraf, M. R. M., Rahimian Koloor, S. S., & Petrů, M. (2021) · Polymers · doi:10.3390/polym13020231 · Cited by 398
Self-citationTransparent and antimicrobial cellulose film from ginger nanofiber
Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Pratama, A. B., Fajri, N., Sapuan, S. M., & Ilyas, R. A. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.105266 · Cited by 290
Self-citationEffects of fibre treatment on mechanical properties of kenaf fibre reinforced composites: a review
Hamidon, M. H., Sultan, M. T. H., Ariffin, A. H., & Shah, A. U. M. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.04.012 · Cited by 269
Effect of density, microstructure, and strain rate on compression behavior of polymeric foams
Saha, M. C., Mahfuz, H., Chakravarty, U. K., Uddin, M., Kabir, M. E., & Jeelani, S. A. K. (2005) · Materials Science and Engineering A · doi:10.1016/j.msea.2005.07.006 · Cited by 260
Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Atikah, M. S. N., Mohd Nurazzi, N., Atiqah, A., Ansari, M. N. M., et al. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.08.028 · Cited by 250
Self-citationIlyas, R. A., Sapuan, S. M., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Asrofi, M., Atikah, M. S. N., Huzaifah, M. R. M., Radzi, A. M., et al. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.04.011 · Cited by 240
Self-citationSyafiq, R., Sapuan, S. M., Zuhri, M. Y. M., Ilyas, R. A., Nazrin, A., Sherwani, S. F. K., & Khalina, A. (2020) · Polymers · doi:10.3390/polym12102403 · Cited by 199
Self-citationYang, X., Ma, J., Shi, Y., Sun, Y., & Yang, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.040 · Cited by 195
Ilyas, R., Sapuan, S., Atikah, M., Asyraf, M., Rafiqah, S. A., Aisyah, H., Nurazzi, N. M., & Norrrahim, M. (2021) · Textile Research Journal · doi:10.1177/0040517520932393 · Cited by 183
Self-citationImpact Mechanics and High-Energy Absorbing Materials: Review
Qiao, P., Yang, M., & Bobaru, F. (2008) · Journal of Aerospace Engineering · doi:10.1061/(asce)0893-1321(2008)21:4(235 · Cited by 182
A review of low-velocity impact on sandwich structures
Chai, G. B., & Zhu, S.-Q. (2011) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1177/1464420711409985 · Cited by 176
Syafri, E., Sudirman, Mashadi, Yulianti, E., Deswita, Asrofi, M., Abral, H., Sapuan, S. M., Ilyas, R. A., & Fudholi, A. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.10.016 · Cited by 175
Self-citationIlyas, R. A., Sapuan, S. M., Atiqah, A., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Nurazzi, N. M., Atikah, M. S. N., Ansari, M. N. M., et al. (2020) · Polymer Composites · doi:10.1002/pc.25379 · Cited by 172
Self-citationSapuan, S. M., Aulia, H. S., Ilyas, R. A., Atiqah, A., Dele-Afolabi, T. T., Nurazzi, M. N., Supian, A. B. M., & Atikah, M. S. N. (2020) · Polymers · doi:10.3390/polym12102211 · Cited by 172
Self-citationHighly transparent and antimicrobial PVA based bionanocomposites reinforced by ginger nanofiber
Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Sapuan, S. M., & Ilyas, R. A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106186 · Cited by 160
Self-citationThermal Properties of Woven Kenaf/Carbon Fibre-Reinforced Epoxy Hybrid Composite Panels
Aisyah, H. A., Tahir, P. M., Sapuan, S. M., Abdan, K., Berkalp, Ö. B., Lee, S. H., Lee, C. H., Norizan, M. N., Ramli, N., Wahab, M. S., et al. (2019) · International Journal of Polymer Science · doi:10.1155/2019/5258621 · Cited by 153
Self-citationEffect of external basalt layers on durability behaviour of flax reinforced composites
Fiore, V., Scalici, T., Calabrese, L., Valenza, A., & Proverbio, E. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.08.087 · Cited by 148
Rozilah, A., Jaafar, C. N. A., Sapuan, S. M., Zainol, I., & Ilyas, R. A. (2020) · Polymers · doi:10.3390/polym12112605 · Cited by 137
Self-citationSabaruddin, F. A., Paridah, M. T., Sapuan, S. M., Ilyas, R. A., Lee, S. H., Abdan, K., Mazlan, N., Roseley, A. S. M., & Khalil, H. P. S. A. (2020) · Polymers · doi:10.3390/polym13010116 · Cited by 122
Self-citationThe mechanical properties of natural fibre based honeycomb core materials
Zuhri, M. Y. M., Guan, Z., & Cantwell, W. J. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.10.016 · Cited by 120
Self-citationRafiqah, S. A., Abdan, K., Harmaen, A. S., Zaman, K., Tawakkal, I., Liu, Q., Ilyas, R. A., & Lee, C. H. (2020) · Polymers · doi:10.3390/polym12071571 · Cited by 117
Self-citationAsyraf, M. R. M., Rafidah, M., Ishak, M. R., Sapuan, S. M., Yidris, N., Ilyas, R. A., & Razman, M. R. (2020) · Polymer Composites · doi:10.1002/pc.25587 · Cited by 109
Self-citationTawakkal, I. S. M. A., Talib, R. A., Abdan, K., & Ling, C. N. (2012) · BioResources · doi:10.15376/biores.7.2.1643-1655 · Cited by 107
Environmentally friendly polymer nanocomposites
Ray, S. S. (2013) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857097828 · Cited by 105
Nanocellulose/Starch Biopolymer Nanocomposites: Processing, Manufacturing, and Applications
Ilyas, R. A., Sapuan, S. M., Norrrahim, M. N. F., Yasim‐Anuar, T. A. T., Kadier, A., Kalil, M. S., Atikah, M. S. N., Ibrahim, R., Asrofi, M., Abral, H., et al. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819661-8.00006-8 · Cited by 67
Self-citationBaihaqi, N. M. Z. N., Khalina, A., Norizan, M. N., Aisyah, H. A., Sapuan, S. M., & Ilyas, R. A. (2021) · Polimery · doi:10.14314/polimery.2021.1.5 · Cited by 53
Self-citationJusoh, A. F., Rejab, M. R. M., Siregar, J. P., & Bachtiar, D. (2016) · MATEC Web of Conferences · doi:10.1051/matecconf/20167400033 · Cited by 25
Cited by
Mohd Nurazzi, N., Asyraf, M. R. M., Khalina, A., Abdullah, N., Sabaruddin, F. A., Kamarudin, S. H., Ahmad, S., Mahat, A. M., Lee, C. L., Aisyah, H. A., et al. (2021) · Polymers · doi:10.3390/polym13071047 · Cited by 478
Self-citationNurazzi, N. M., Asyraf, M. R. M., Fatimah Athiyah, S., Shazleen, S. S., Rafiqah, S. A., Harussani, M. M., Kamarudin, S. H., Razman, M. R., Rahmah, M., Zainudin, E. S., et al. (2021) · Polymers · doi:10.3390/polym13132170 · Cited by 462
Self-citationA Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., et al. (2021) · Polymers · doi:10.3390/polym13040646 · Cited by 398
Self-citationIlyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
Self-citationRecent advances in biodegradable polymers – Properties, applications and future prospects
Mukherjee, C., Varghese, D., Krishna, J. S., Boominathan, T., Rakeshkumar, R., Dineshkumar, S., Brahmananda Rao, C. V. S., & Sivaramakrishna, A. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112068 · Cited by 321
Metadata
- Authors
- Alsubari, S., Zuhri, M. Y. M., Sapuan, S. M., Ishak, M. R., Ilyas, R. A., & Asyraf, M. R. M.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-01-28
- Volume
- 13
- Issue
- 3
- Pages
- 423
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3124661452
- Cited by
- 290
- References
- 41
- FWCI
- 18.19
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.