Effect of Biomass as Nucleating Agents on Crystallization Behavior of Polylactic Acid
Open accessThe DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.
Abstract
Polylactic acid (PLA) is one of the most productive biodegradable materials. Its bio-based source makes it truly carbon neutral. However, PLA is hard to crystallize as indicated by a low crystallization rate and a low crystallinity under conventional processing conditions, which limits its wider application. One of the most effective ways to enhance the crystallization ability of PLA is to add nucleating agents. In the context of increasing global environmental awareness and the decreasing reserves of traditional petroleum-based materials, biomass nucleating agents, compared with commonly used petroleum-based nucleating agents, have received widespread attention in recent years due to their abundance, biodegradability and renewability. This paper summarizes the research progress on biomass nucleating agents for regulating the crystallization behavior of polylactic acid. Examples of biomass nucleating agents include cellulose, hemicellulose, lignin, amino acid, cyclodextrins, starch, wood flour and natural plant fiber. Such green components from biomass for PLA are believed to be a promising solution for the development of a wholly green PLA-based system or composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“This indicates that the thermal and mechanical conditions have a significant influence on the microstructure of the material.60”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [60]
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“In their study, the PLA crystallite sizes started at around 8 nm.With increasing temperature and under uniaxial loading, these sizes increased up to 20 nm.”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [60]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lignin Valorization: Improving Lignin Processing in the Biorefinery
Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., Keller, M., et al. (2014) · Science · doi:10.1126/science.1246843 · Cited by 4,125
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Nanocellulose: From Fundamentals to Advanced Applications
Trache, D., Tarchoun, A. F., Derradji, M., Hamidon, T. S., Masruchin, N., Brosse, N., & Hussin, M. H. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00392 · Cited by 1,309
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913
Zhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers
Hoogsteen, W., Postema, A. R., Pennings, A. J., Ten Brinke, G., & Zugenmaier, P. (1990) · Macromolecules · doi:10.1021/ma00204a041 · Cited by 864
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679 · cited 1×
“The γ crystal form is obtained by epitaxial crystallization on hexamethylbenzene [20].”
BackgroundMolecular conformation of poly(S‐lactic acid)
De Santis, P., & Kovacs, A. J. (1968) · Biopolymers · doi:10.1002/bip.1968.360060305 · Cited by 575
Epitaxial crystallization and crystalline polymorphism of polylactides
Cartier, L., Okihara, T., Ikada, Y., Tsuji, H., Puiggali, J., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00234-2 · Cited by 559
Fabrication of Environmentally Biodegradable Lignin Nanoparticles
Frangville, C., Rutkevičius, M., Richter, A. P., Velev, O. D., Stoyanov, S. D., & Paunov, V. N. (2012) · ChemPhysChem · doi:10.1002/cphc.201200537 · Cited by 466
Cited by
Zhu, G., Gao, J., & Zhu, Z. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c02766 · Cited by 64
Hamidi, M. N., Abdullah, J., Mahmud, A. S., Hassan, M. H., & Zainoddin, A. Y. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2025.108697 · Cited by 41
PLA Block Polymers: Versatile Materials for a Sustainable Future
Krajovic, D. M., Kumler, M. S., & Hillmyer, M. A. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00161 · Cited by 35
Esters of Cinnamic Acid as Green Plasticizers for Polylactide Formulations with Improved Ductility
Barandiaran, A., Gómez-Caturla, J., Martínez, J. I., Lascano, D., Cantó, M. Á. S., Moreno, V., & Fenollar, O. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300022 · Cited by 35
Wu, H., Hua, X., Hu, J. J., Liu, X., & Zhang, J. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122716 · Cited by 27
Fayyazbakhsh, A., Hajinajaf, N., Bakhtiari, H., Feuchter, M., Improta, I., Salehi, E., Shahsavar, S. K., Julinová, M., Ghasemi, A., Ghasemi, B., et al. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01395 · Cited by 31
Additive Manufacturing with Cellulose‐Based Composites: Materials, Modeling, and Applications
De, S., Rukmani, S. J., Zhao, X., Clarkson, C. M., Vautard, F., Bhagia, S., Goswami, M., Zhang, S., Elyas, S. F., Zhao, W. T., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202414222 · Cited by 28
Niu, W., Pei, L., Feng, X., & Wang, J. J. (2026) · Industrial Crops and Products · doi:10.1016/j.indcrop.2026.123567 · Cited by 19
Dun, D., Bai, Y., Wang, L., Xu, B., Zhou, H., & Wang, X. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02935-6 · Cited by 16
Jiménez, J. A. V., Sabir, S., Sauceau, M., Sescousse, R., Espitalier, F., Moigne, N. L., Bénézet, J., & Fages, J. (2024) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2024.106190 · Cited by 17
Minimizing food oxidation using aromatic polymer: From lignin into nano-lignin
Arnata, I. W., Anggreni, A. A. M. D., Arda, G., Masruchin, N., Sartika, D., Fahma, F., & Firmanda, A. (2024) · Food Research International · doi:10.1016/j.foodres.2024.115159 · Cited by 23
Raj, H., Choudhury, A. M., Tripathi, S., Bauri, S., Mandal, S. S., Prakash, R., Tiwari, S., Layek, R. K., & Maiti, P. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.120245 · Cited by 19
Recent progress in biosourced polylactic acid-based biocomposites for dentistry: A review
Pan, C., Gao, Q., Chen, Y., Wang, Y., & Tang, Z. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143528 · Cited by 13
Motshabi, N., Lenetha, G. G., Malimabe, M. A., & Gumede, T. P. (2025) · Polymers · doi:10.3390/polym17141947 · Cited by 14
Significantly enhanced crystallization of polylactide Ingeo 4032D by polyethylene ionomer
Li, T., Gao, Y., Sun, X., Tang, Y. J., & Fu, Q. (2023) · Polymer · doi:10.1016/j.polymer.2023.126557 · Cited by 12
Das, K. P., & Satapathy, B. K. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c00386 · Cited by 11
Chattrakul, K., Pholsuwan, A., Simpraditpan, A., Martwong, E., & Chailad, W. (2025) · Polymers · doi:10.3390/polym17131792 · Cited by 11
Abdullah, K. K., & Molnár, K. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500368 · Cited by 12
Flores‐Silva, P. C., Hernández‐Hernández, E., Sifuentes‐Nieves, I., Lara-Sánchez, J. F., Ledezma-Pérez, A. S., Alvarado‐Canché, C., & Ramírez‐Vargas, E. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02943-6 · Cited by 10
Alghamdi, S. S., Balu, R., Vongsvivut, J. P., Truong, V. K., Mettu, S., John, S., Choudhury, N. R., & Dutta, N. K. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c01049 · Cited by 10
Agro-Waste Bean Fibers as Reinforce Materials for Polycaprolactone Composites
Monte, C. D., Arrighetti, L., Ricci, L., Civello, A., & Bronco, S. (2023) · Compounds · doi:10.3390/compounds3030036 · Cited by 10
Panickar, R., & Rangari, V. K. (2024) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.4c00282 · Cited by 10
Wahbi, M., Wen, Y., Kontopoulou, M., & De France, K. J. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124471 · Cited by 8
Nucleation Work on Curved Substrates
Kožíšek, Z., Král, R., & Zemenová, P. (2023) · Metals · doi:10.3390/met13111815 · Cited by 8
Gorar, A. A. K., Zhiyi, G., Zhi-cheng, W., Daham, A., Wang, X., Wang, J., & Liu, W. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-05703-9 · Cited by 8
Hubbard, A. M., Copenhaver, K., Clarkson, C. M., Rossy, A. M., Rencheck, M. L., Lamm, M. E., & Ozcan, S. (2025) · Next Materials · doi:10.1016/j.nxmate.2025.100940 · Cited by 7
Lee, A., Ko, Y., Ju, S., Shin, Y., Jeon, J., Kim, S.-W., Oh, Y., Yi, J. W., Um, M., & Park, T. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c03023 · Cited by 7
Hiller, B. T., Schübel, L., Rennert, M., Krieg, D., Nase, M., & Puch, F. (2024) · Journal of Polymers and the Environment · doi:10.1007/s10924-024-03456-6 · Cited by 9
Iqbal, M., Rizal, S., Bairwan, R. D., Zein, I., & Khalil, H. P. S. A. (2024) · Polymer Composites · doi:10.1002/pc.29453 · Cited by 7
Mandlule, A., Liu, Y., Schwanz, S., Pieper, Y., Scharf, H., Iskhakova, K., Conceição, A. L. C., Wieland, D. C. F., Zeller-Plumhoff, B., Toma, F. M., et al. (2026) · Materials Advances · doi:10.1039/d5ma00886g · Cited by 6
Jamnongkan, T., Sirichaicharoenkol, K., Nethiyaphan, T., Sakulthaew, C., Srisawat, N., Wachirawongsakorn, P., Krisbiantoro, P. A., Wu, K. C. ‐., Nguyen, N. H., Wangkawong, K., et al. (2025) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2025.106331 · Cited by 6
Fayyazbakhsh, A., Koutný, M., Kalendová, A., & Kadlečková, M. (2025) · Journal of Polymer Research · doi:10.1007/s10965-025-04644-1 · Cited by 6
Understanding the ecological impacts of biodegradable microplastics
Wang, J., Sun, M., Liu, W., Wang, F., Abakumov, E. V., Mo, M., Xiao, C., Liu, Z., Liu, H., Li, C., et al. (2025) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2025.140418 · Cited by 7
Characterization and Properties of Polylactic Acid/Cottonseed Protein Bioplastics
Jiang, Y., Yan, P., Mai, L., Liu, H., Liu, X., Yang, C., Peng, J., & Yue, H. (2024) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202400191 · Cited by 6
Abrantes, S., da Silva, S. P. M., Lima, P. S., & Oliveira, J. M. (2025) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-025-14105-y · Cited by 6
Gürpınar, E., & Ünlü, C. H. (2026) · Composites Communications · doi:10.1016/j.coco.2026.102786 · Cited by 5
Synthesis of Lignin and PLA/PBAT Films: Biodegradability and Environmental Impacts
Chiarasumran, N., Jitsamut, R., Prapainainar, P., Thanapimmetha, A., Saisriyoot, M., Abd‐Aziz, S., Khomlaem, C., Kim, B. S., & Srinophakun, P. (2026) · Polymers · doi:10.3390/polym18070793 · Cited by 5
Akiyama, K., Koda, T., Nishioka, A., Matsumura, Y., & Ochiai, B. (2024) · Journal of Polymer Science · doi:10.1002/pol.20240364 · Cited by 5
Tuning Crystallinity of Poly(L-Lactic Acid) Microspheres through Emulsification Temperature Changes
Tamburini, G., Tarricone, G., Piva, S., Sassella, A., Bertagnoli, S., Lorenzi, R., & Paleari, A. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01749 · Cited by 6
Srihanam, P., Pakkethati, K., Srisuwan, Y., Phromsopha, T., Manphae, A., Phinyocheep, P., Yamaguchi, M., & Baimark, Y. (2024) · Scientific Reports · doi:10.1038/s41598-024-68638-7 · Cited by 5
Coating of Hemp Fibres with Hydrophobic Compounds Extracted from Pine Bark
Abbel, R., Risani, R., Nourtier, M., Donaldson, L. A., Brunschwig, C., Mayer‐Laigle, C., Bridson, J. H., Thumm, A., Dickson, A., Murray, R. H., et al. (2024) · Fibers · doi:10.3390/fib12110096 · Cited by 5
Tunçalp, M., Seki, Y., Altay, L., Sarıkanat, M., & İşbilir, A. (2025) · SPE Polymers · doi:10.1002/pls2.70015 · Cited by 4
Potency of coffee by-products as sustainable added material in bio/edible film development
Wardana, A. A., Febrianto, N. A., Marcellino, V., Wigati, L. P., Nkede, F. N., Tanaka, F., & Tanaka, F. (2025) · Frontiers in Sustainable Food Systems · doi:10.3389/fsufs.2025.1667255 · Cited by 6
Sahoo, B. L., Mohanty, S., & Nayak, S. K. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70633 · Cited by 5
Lin, J.-H., Xiao, W.-H., Wu, J.-B., Wu, J.-L., Xu, R.-J., & Lei, C.-H. (2026) · Chinese Journal of Polymer Science · doi:10.1007/s10118-026-3575-z · Cited by 4
Cao, L., Chen, P., Qi, B., Qi, Z., Chang, L., Shan, J., Sun, C., Tan, H., & Zhang, Y. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.110857 · Cited by 4
Wang, A., Meng, R., Fan, Y., Zhou, H., Wang, X., & Zhang, Y. (2025) · Advanced Engineering Materials · doi:10.1002/adem.202500259 · Cited by 3
Moya-Muriana, J. Á., Navas‐Martos, F. J., Jurado-Contreras, S., Bachino-Fagalde, E., & Rubia, M. D. L. (2025) · Polymers · doi:10.3390/polym18010030 · Cited by 4
Lee, S., Jang, M., Choi, Y., Jang, M., Kim, N., Ok, Y. S., & Hwang, S. Y. (2026) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2026.111987 · Cited by 4
Nomadolo, N. E., & Ray, S. S. (2026) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2026.03.001 · Cited by 5
Dun, D., Zhang, M., Zhu, M., Zhou, H., Li, J., & Hu, J. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.55935 · Cited by 3
Sustainable additives as nucleating agents
Shamsi, R., & Sheibani, R. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-23806-2.00003-8 · Cited by 2
Ji, A., Bhagia, S., Han, N., Kim, K. H., Leem, G., Gallego, N. C., Zhang, S., Li, K., Ozcan, S., Ragauskas, A. J., et al. (2025) · RSC Sustainability · doi:10.1039/d5su00327j · Cited by 3
Chen, J., Guan, J., Zhu, L. S., & Zhang, K. (2025) · Journal of Polymer Research · doi:10.1007/s10965-025-04589-5 · Cited by 2
Liu, X., Zhou, W., Li, J., Zhang, H., Mai, L., Martínez-Hergueta, F., Fernandéz‐Blázquez, J. P., & Yue, H. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.58047 · Cited by 2
Frimpong, E. K., Kayaba, A.-M., Akromah, S., Nettey-Oppong, E. E., Mensah, E. E., Issakah, O., & Asare, E. K. A. (2025) · Composites and Advanced Materials · doi:10.1177/26349833251411841 · Cited by 2
Thành, N. C., Thinh, P. D., Dong, B. P., Cat, T. H., & Huy, N. T. (2026) · RSC Advances · doi:10.1039/d5ra09705c · Cited by 3
Nikzad, M. K., Ghasemi, F. A., & Aghadavoudi, F. (2024) · Journal of Elastomers & Plastics · doi:10.1177/00952443241270789 · Cited by 2
Lyu, H., Sun, D., Li, Y., Yu, G., Liu, S., Huo, P., Zhang, D., & Kong, X. (2025) · Polymers · doi:10.3390/polym17081073 · Cited by 1
Hamidi, M. N., Abdullah, J., Mahmud, A. S., Hassan, M. H., & Zainoddin, A. Y. (2025) · Lecture notes in mechanical engineering · doi:10.1007/978-981-96-3814-7_6 · Cited by 1
Wang, J., Hao, W., Xing, Q., Li, R., Dong, X., & Zhang, X. (2025) · Thermochimica Acta · doi:10.1016/j.tca.2025.180152 · Cited by 1
Non-isothermal crystallization kinetics of modified polylactic acid/kenaf fiber biocomposites
Borhan, A., & Taib, R. M. (2025) · Journal of Polymer Research · doi:10.1007/s10965-025-04713-5 · Cited by 1
Pongputthipat, W., Ruksakulpiwat, Y., Ruksakulpiwat, C., Jarukumjorn, K., & Chumsamrong, P. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-06105-7 · Cited by 2
Wu, J.-L., Xiao, W.-H., Wu, J., Lin, J.-H., Xu, R.-J., & Lei, C.-H. (2026) · Chinese Journal of Polymer Science · doi:10.1007/s10118-025-3497-1 · Cited by 1
Zhang, T., Zhang, X., Hua, X., Wu, H., & Zhang, J. (2026) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2026.112068 · Cited by 1
Majeed, A., Cayuela, D., Mijas, G., Franchini, M. C., & Riba‐Moliner, M. (2026) · Polymers · doi:10.3390/polym18121419 · Cited by 1
STRUCTURE DEVELOPMENT AND PROPERTIES OF PLASTICIZED PVA-STARCH-PADDY STRAW COMPOSITES
Potdar, P. P., KAUR, P., Singh, M., Kulkarni, M. B., & Radhakrishnan, S. (2023) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2023.57.95
Jansri, E., O-Charoen, N., Rukthong, P., Charoenlarp, K., Naksang, P., Vuthiganond, N., & Kampeerapappun, P. (2025) · Discover Sustainability · doi:10.1007/s43621-025-01719-3
Fabrication and Properties of Reversible Thermochromic PLA/PEG Composites for Temperature Sensing
Chan, Q., Hamid, Z. A. A., Bustami, Y., & Ishak, K. M. K. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.70065
Jiang, H., Chen, C., Wang, F., Cheng, D., & Wang, Y. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.70276
Archibong, F. N., Hocine, N. A., Médéric, P., Gratton, M., Ekwedigwe, M. C., Nweke, O. M., & Valentine, N. I. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70568
Lee, I. J., & Kim, S. K. (2026) · Polymers · doi:10.3390/polym18060691
Doğan, A., Altun, M., Çelebi, M., & Çitil, Ş. (2026) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2026.2649844
Bhati, P., Kushwaha, S., Bharadwaj, D., Vardhan, A., & Dwivedi, S. (2026) · AIP conference proceedings · doi:10.1063/5.0340414
Zhou, H., Yao, Y., Sheng, J., Jin, M., Yu, J., & Zhang, C. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70620
Sirichaicharoenkol, K., Khankhuean, A., Sirisaksoontorn, W., Sakulthaew, C., Thach, U. D., Krisbiantoro, P. A., Wu, K. C. ‐., Huang, C., & Jamnongkan, T. (2026) · Polymers · doi:10.3390/polym18141707 · Cited by 1
Effect of Fiber Content on the Mechanical Performance of Bamboo Microfiber Reinforced PLA Composites
Silva, L., Menezzi, C. H. S. D., & Dornelles, P. G. (2026) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2026.02026-0052
Mao, Y., Chen, J., Zheng, P., Fang, Y., Dong, J., Huang, H., & Yu, J. (2026) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2026.114652
Application and research progress of nucleating agents in degradable materials
Li, X., Dong, Y., Sun, X., Wang, R., Chen, L., Yuan, S., Wang, Y., Wu, X., Ma, H., & Zhang, M. (2026) · e-Polymers · doi:10.1515/epoly-2025-0082
da Costa, R. B., Modolon, H. B., da Silveira, R. B., Rodrigues, J., Wermuth, T. B., Arcaro, S., & Montedo, O. R. K. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.71448
Ötvös, B., Decsov, K. E., Kissová, S., Gere, D., & Bocz, K. (2026) · Research Square · doi:10.21203/rs.3.rs-10381835/v1
Giannakas, A., Kopsacheili, A., Leontiou, A. A., Kollia, E., Antonopoulos, F., Proestos, C., & Giannakas, A. E. (2026) · Applied Sciences · doi:10.3390/app16178777
Bennacer, S., Hamour, N., Meniche, A., Yahiaoui, A., Remila, B., Benoit, G., & de Dicastillo, C. L. (2026) · Journal of Plastic Film & Sheeting · doi:10.1177/87560879261485503
Jin, H., Chen, L., Wang, L., Hu, X., Zhang, J., Liu, Q., Lang, M., & Zhao, L. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c02999
Bio-based and biodegradable thermoplastics
Santis, F. D., Pantani, R., & Volpe, V. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-33228-9.00006-3
Metadata
- Authors
- Shi, K., Liu, G., Sun, H., Yang, B., & Weng, Y.
- Affiliations
- Beijing Technology and Business University (CN)
- Corresponding author
- Sun, Hui
- Weng, Yunxuan
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2022-10-13
- Volume
- 14
- Issue
- 20
- Pages
- 4305
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC9607036
- OpenAlex
- W4306153419
- Cited by
- 85
- References
- 71
- Citations by year
- 2026: 25 · 2025: 33 · 2024: 19 · 2023: 8
- FWCI
- 1.03
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (31570575, 52073004)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- polylactic acid, crystallization behavior, nucleation, cellulose, hemicellulose, lignin, amino acids, cyclodextrins, starch, wood flour, natural plant fibers, biodegradable polymers, crystallinity, crystallization rate
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.