Effect of Biomass as Nucleating Agents on Crystallization Behavior of Polylactic Acid
Open accessThe DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.
Abstract
Polylactic acid (PLA) is one of the most productive biodegradable materials. Its bio-based source makes it truly carbon neutral. However, PLA is hard to crystallize as indicated by a low crystallization rate and a low crystallinity under conventional processing conditions, which limits its wider application. One of the most effective ways to enhance the crystallization ability of PLA is to add nucleating agents. In the context of increasing global environmental awareness and the decreasing reserves of traditional petroleum-based materials, biomass nucleating agents, compared with commonly used petroleum-based nucleating agents, have received widespread attention in recent years due to their abundance, biodegradability and renewability. This paper summarizes the research progress on biomass nucleating agents for regulating the crystallization behavior of polylactic acid. Examples of biomass nucleating agents include cellulose, hemicellulose, lignin, amino acid, cyclodextrins, starch, wood flour and natural plant fiber. Such green components from biomass for PLA are believed to be a promising solution for the development of a wholly green PLA-based system or composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“This indicates that the thermal and mechanical conditions have a significant influence on the microstructure of the material.60”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [60]
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“In their study, the PLA crystallite sizes started at around 8 nm.With increasing temperature and under uniaxial loading, these sizes increased up to 20 nm.”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [60]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lignin Valorization: Improving Lignin Processing in the Biorefinery
Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., Keller, M., et al. (2014) · Science · doi:10.1126/science.1246843 · Cited by 4,125
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Nanocellulose: From Fundamentals to Advanced Applications
Trache, D., Tarchoun, A. F., Derradji, M., Hamidon, T. S., Masruchin, N., Brosse, N., & Hussin, M. H. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00392 · Cited by 1,309
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913
Zhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers
Hoogsteen, W., Postema, A. R., Pennings, A. J., Ten Brinke, G., & Zugenmaier, P. (1990) · Macromolecules · doi:10.1021/ma00204a041 · Cited by 864
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679 · cited 1×
“The γ crystal form is obtained by epitaxial crystallization on hexamethylbenzene [20].”
BackgroundMolecular conformation of poly(S‐lactic acid)
De Santis, P., & Kovacs, A. J. (1968) · Biopolymers · doi:10.1002/bip.1968.360060305 · Cited by 575
Epitaxial crystallization and crystalline polymorphism of polylactides
Cartier, L., Okihara, T., Ikada, Y., Tsuji, H., Puiggali, J., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00234-2 · Cited by 559
Fabrication of Environmentally Biodegradable Lignin Nanoparticles
Frangville, C., Rutkevičius, M., Richter, A. P., Velev, O. D., Stoyanov, S. D., & Paunov, V. N. (2012) · ChemPhysChem · doi:10.1002/cphc.201200537 · Cited by 466
The frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
Wei, X.-F., Bao, R.-Y., Cao, Z.-Q., Yang, W., Xie, B.-H., & Yang, M.-B. (2014) · Macromolecules · doi:10.1021/ma402653a · Cited by 324
Helix Distortion and Crystal Structure of the α-Form of Poly(l-lactide)
Sasaki, S., & Asakura, T. (2003) · Macromolecules · doi:10.1021/ma0348674 · Cited by 296
From lignin association to nano-/micro-particle preparation: extracting higher value of lignin
Zhao, W., Simmons, B., Singh, S., Ragauskas, A., & Cheng, G. (2016) · Green Chemistry · doi:10.1039/c6gc01813k · Cited by 272
Improvement of thermal behaviors of biodegradable poly(lactic acid) polymer: A review
Jin, F.-L., Hu, R.-R., & Park, S.-J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.10.078 · Cited by 233
Lignin-based polymers and nanomaterials
Grossman, A., & Vermerris, W. (2019) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2018.10.009 · Cited by 228
Coppola, B., Cappetti, N., Di Maio, L., Scarfato, P., & Incarnato, L. (2018) · Materials · doi:10.3390/ma11101947 · Cited by 226
Lignin: A Biopolymer from Forestry Biomass for Biocomposites and 3D Printing
Tanase-Opedal, M., Espinosa, E., Rodríguez, A., & Chinga-Carrasco, G. (2019) · Materials · doi:10.3390/ma12183006 · Cited by 224
Nam, J. Y., Okamoto, M., Okamoto, H., Nakano, M., Usuki, A., & Matsuda, M. (2006) · Polymer · doi:10.1016/j.polymer.2005.12.066 · Cited by 219
Unprecedented Chitin and Chitosan: A Chemical Overview
Yeul, V. S., & Rayalu, S. S. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0458-x · Cited by 201
Yang, W., Fortunati, E., Dominici, F., Kenny, J. M., & Puglia, D. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.051 · Cited by 200
Sun, Y., Yang, L., Lu, X., & He, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05991c · Cited by 178
Ionic Liquids for Lignin Processing: Dissolution, Isolation, and Conversion
Hossain, M. M., & Aldous, L. (2012) · Australian Journal of Chemistry · doi:10.1071/ch12324 · Cited by 127
Peng, Y., Gardner, D. J., Han, Y., Cai, Z., & Tshabalala, M. A. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.05.033 · Cited by 102
Shazleen, S. S., Yasim‐Anuar, T. A. T., Ibrahim, N. A., Hassan, M. A., & Ariffin, H. (2021) · Polymers · doi:10.3390/polym13030389 · Cited by 84
Kang, K. S., Lee, S. I., Lee, T. J., Narayan, R., & Shin, B. Y. (2008) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-008-0101-7 · Cited by 79
Electret characteristics of melt‐blown polylactic acid fabrics for air filtration application
Zhang, J., Chen, G., Bhat, G. S., Azari, H., & Pen, H. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48309 · Cited by 79
Clarkson, C. M., Azrak, S. M. E. A., Schueneman, G. T., Snyder, J. F., & Youngblood, J. P. (2019) · Polymer · doi:10.1016/j.polymer.2019.122101 · Cited by 76
Cesur, S., Oktar, F. N., Ekren, N., Kılıç, O., Alkaya, D. B., Seyhan, S. A., Eğe, Z. R., Lin, C., Kuruca, S. E., Erdemir, G., et al. (2019) · Journal of the Australian Ceramic Society · doi:10.1007/s41779-019-00363-1 · Cited by 73
Xiao, H., Yang, L., Ren, X., Jiang, T., & Yeh, J. (2010) · Polymer Composites · doi:10.1002/pc.21004 · Cited by 70
Development of Antimicrobial PLA Composites for Fused Filament Fabrication
Brounstein, Z., Yeager, C. M., & Labouriau, A. (2021) · Polymers · doi:10.3390/polym13040580 · Cited by 70
Crystallization of poly(lactic acid) accelerated by cyclodextrin complex as nucleating agent
Zhang, R., Wang, Y., Wang, K., Zheng, G., Li, Q., & Shen, C. (2012) · Polymer Bulletin · doi:10.1007/s00289-012-0814-y · Cited by 69
Singla, R. K., Maiti, S. N., & Ghosh, A. K. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098688 · Cited by 65
Kovalcik, A., Pérez‐Camargo, R. A., Fürst, C., Kucharczyk, P., & Müller, A. J. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.07.009 · Cited by 65
Xu, H., Liu, C., Chen, C., Hsiao, B. S., Zhong, G., & Li, Z. (2012) · Biopolymers · doi:10.1002/bip.22079 · Cited by 64
Liu, R., Dai, L., Hu, L., Zhou, W., & Si, C. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.06.006 · Cited by 64
Lignin-coated cellulose nanocrystals as promising nucleating agent for poly(lactic acid)
Gupta, A., Simmons, W., Schueneman, G. T., & Mintz, E. A. (2016) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-016-5657-6 · Cited by 63
Yetiş, F., Liu, X., Sampson, W. W., & Gong, H. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109803 · Cited by 63
Morphological characteristics and properties of TPS/PLA/cassava pulp biocomposites
Jullanun, P., & Yoksan, R. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106522 · Cited by 61
Zhang, X., Yang, B., Fan, B., Sun, H., & Zhang, H. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00830 · Cited by 61
Self-citationNucleation Effects of Nucleobases on the Crystallization Kinetics of Poly(L‐lactide)
Pan, P., Yang, J., Shan, G., Bao, Y., Weng, Z., & Inoue, Y. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100266 · Cited by 60
Suryanegara, L., Okumura, H., Nakagaito, A. N., & Yano, H. (2011) · Cellulose · doi:10.1007/s10570-011-9515-1 · Cited by 50
Self-assembly behavior and conformation of amphiphilic hemicellulose-graft-fatty acid micelles
Shen, F., Ling, H., Ge, W., Yang, Y., Wang, X., Ren, J., & Wang, X. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117886 · Cited by 50
Prasong, W., Ishigami, A., Thumsorn, S., Kurose, T., & Itô, H. (2021) · Polymers · doi:10.3390/polym13050740 · Cited by 48
Xylan esters as bio-based nucleating agents for poly (l-lactic acid)
Fundador, N. G. V., Enomoto, Y., Takemura, A., & Iwata, T. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.01.010 · Cited by 40
Influence of nanofibrillated cellulose on the mechanical and thermal properties of poly(lactic acid)
Perić, M., Putz, R. F., & Paulik, C. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.03.014 · Cited by 40
Wan, L., Li, C., Sun, C., Zhou, S., & Zhang, Y. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.06.002 · Cited by 39
Combined effect of nucleating agent and plasticizer on the crystallization behaviour of polylactide
Anakabe, J., Zaldua Huici, A. M., Eceiza, A., Arbelaiz, A., & Avérous, L. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-1989-z · Cited by 38
Hijazi, N., Moigne, N. L., Rodier, É., Sauceau, M., Vincent, T., Bénézet, J., & Fages, J. (2018) · Polymer Engineering and Science · doi:10.1002/pen.24983 · Cited by 38
Accelerated biodegradation of PLA/PHB-blended nonwovens by a microbial community
Liu, Y., Zhan, Z., Ye, H., Lin, X., Yan, Y., & Zhang, Y. (2019) · RSC Advances · doi:10.1039/c8ra10591j · Cited by 38
Wu, W., Wu, G., & Zhang, H. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3881 · Cited by 37
Reduction of cycle times in injection molding of PLA through bio-based nucleating agents
Schäfer, H., Pretschuh, C., & Brüggemann, O. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.03.011 · Cited by 34
Deetuam, C., Samthong, C., Choksriwichit, S., & Somwangthanaroj, A. (2020) · Iranian Polymer Journal · doi:10.1007/s13726-019-00778-4 · Cited by 34
Wei, Z., Shao, S., Sui, M., Song, P., He, M., Xu, Q., Leng, X., Wang, Y., & Li, Y. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.05.064 · Cited by 31
Crystallization behavior of poly(lactic acid)/elastomer blends
Kaavessina, M., Ali, I., Elleithy, R. H., & Al-Zahrani, S. M. (2012) · Journal of Polymer Research · doi:10.1007/s10965-011-9818-9 · Cited by 26
Amino acids and poly(amino acids) as nucleating agents for poly(lactic acid)
Josefina, M. J. M., Vanhalle, M., Goderis, B., & Puyvelde, P. V. (2014) · Journal of Polymer Engineering · doi:10.1515/polyeng-2014-0175 · Cited by 24
Engineering conductive protein films through nanoscale self-assembly and gold nanoparticles doping
Mejías, S. H., López‐Martínez, E., Fernandez, M., Couleaud, P., Martin-Lasanta, A., Romera, D., Sánchez‐Iglesias, A., Casado, S., Osorio, M. R., Abad, J. M., et al. (2021) · Nanoscale · doi:10.1039/d1nr00238d · Cited by 24
Borůvka, M., Běhálek, L., Lenfeld, P., Ngaowthong, C., & Pechočiaková, M. (2018) · Materials Technology · doi:10.1080/10667857.2018.1540332 · Cited by 23
da Silva, S. P. M., Silva, M., & Oliveira, J. M. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-10147-6 · Cited by 23
The Optical Activity of Lysozyme Crystals
Kobayashi, J., Asahi, T., Sakurai, M., Kagomiya, I., Asai, H., & Asami, H. (1998) · Acta Crystallographica Section A Foundations of Crystallography · doi:10.1107/s0108767398001986 · Cited by 22
Non‐isothermal crystallization kinetics of cork‐polymer composites for injection molding
da Silva, S. P. M., Lima, P. S., & Oliveira, J. M. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44124 · Cited by 22
Structure of bis(l-alaninato)zinc(II) and single crystal EPR spectra of Cu(II) impurities
Dalosto, S. D., Ferreyra, M. G., Calvo, R., Piro, O. E., & Castellano, E. E. (1999) · Journal of Inorganic Biochemistry · doi:10.1016/s0162-0134(99)00010-0 · Cited by 21
Improving the stability of polylactic acid foams by interfacially adsorbed particles
Lobos, J., Iasella, S. V., Rodríguez‐Pérez, M. Á., & Velankar, S. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24185 · Cited by 20
Enhanced crystallization of poly(d-lactide) by xylan esters
Fundador, N. G. V., & Iwata, T. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.013 · Cited by 17
Vargová, Z., Almáši, M., Arabuli, L., Györyová, K., Zeleňák, V., & Kuchár, J. (2010) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2010.12.022 · Cited by 16
Crystallization behavior, heat resistance, and mechanical performances of PLLA /myo‐inositol blends
Shi, H., Chen, X., Chen, W., Pang, S., Pan, L., Xu, N., & Li, T. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44732 · Cited by 15
Li, S., Xiong, Z., Fei, P., Cai, J., Xiong, H., Tan, J., & Yu, Y. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.38587 · Cited by 13
Ng, C. H., Fun, H., Teo, S.-B., Teoh, S. G., & Chinnakali, K. (1995) · Acta Crystallographica Section C Crystal Structure Communications · doi:10.1107/s0108270194009340 · Cited by 13
Non-Isothermal Crystallization Kinetics of Poly(Lactic Acid)/Kenaf Fiber Composites
Borhan, A., & Taib, R. M. (2020) · Sains Malaysiana · doi:10.17576/jsm-2020-4909-15 · Cited by 10
Li, Y., & Zhen, W. (2018) · Macromolecular Research · doi:10.1007/s13233-018-6027-y · Cited by 8
Exploring Charged Polymeric Cyclodextrins for Biomedical Applications
Bognanni, N., Bellia, F., Viale, M., Bertola, N., & Vecchio, G. (2021) · Molecules · doi:10.3390/molecules26061724 · Cited by 8
Cited by
Zhu, G., Gao, J., & Zhu, Z. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c02766 · Cited by 64
Hamidi, M. N., Abdullah, J., Mahmud, A. S., Hassan, M. H., & Zainoddin, A. Y. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2025.108697 · Cited by 41
PLA Block Polymers: Versatile Materials for a Sustainable Future
Krajovic, D. M., Kumler, M. S., & Hillmyer, M. A. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00161 · Cited by 35
Esters of Cinnamic Acid as Green Plasticizers for Polylactide Formulations with Improved Ductility
Barandiaran, A., Gómez-Caturla, J., Martínez, J. I., Lascano, D., Cantó, M. Á. S., Moreno, V., & Fenollar, O. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300022 · Cited by 35
Wu, H., Hua, X., Hu, J. J., Liu, X., & Zhang, J. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122716 · Cited by 27
Metadata
- Authors
- Shi, K., Liu, G., Sun, H., Yang, B., & Weng, Y.
- Affiliations
- Beijing Technology and Business University (CN)
- Corresponding author
- Sun, Hui
- Weng, Yunxuan
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2022-10-13
- Volume
- 14
- Issue
- 20
- Pages
- 4305
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC9607036
- OpenAlex
- W4306153419
- Cited by
- 85
- References
- 71
- Citations by year
- 2026: 25 · 2025: 33 · 2024: 19 · 2023: 8
- FWCI
- 1.03
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (31570575, 52073004)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- polylactic acid, crystallization behavior, nucleation, cellulose, hemicellulose, lignin, amino acids, cyclodextrins, starch, wood flour, natural plant fibers, biodegradable polymers, crystallinity, crystallization rate
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.