The DOI matches its Crossref record; 76 of the 80 references it cites were found in a registry or an index, and 1 are not checked yet; none of the 143 sources its claims cite is checked for support yet.
Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin
Open accessAbstract
Chitosan is a natural biopolymer that can be used in biomedical applications, tissue engineering, and wound dressing because of its biodegradability, biocompatibility, and antibacterial activity. The blending of chitosan films with natural biomaterials such as cellulose, honey, and curcumin was studied at different concentrations in order to improve their physical properties. Fourier transform infrared (FTIR) spectroscopy, mechanical tensile properties, X-ray diffraction (XRD), antibacterial effects, and scanning electron microscopy (SEM) were studied for all blended films. The XRD, FTIR, and mechanical results showed that films blended with curcumin were more rigid and compatible and had higher antibacterial effects than other blended films. In addition, XRD and SEM showed that blending chitosan films with curcumin decreases the crystallinity of the chitosan matrix compared to cellulose and honey blending films due to increased intermolecular hydrogen bonding, which reduces the close packing of the CS matrix.
Checked 2026-11-18 · 1 reference not checked yet
Overview
CoChat Summary
TL;DR
Blending chitosan films with cellulose, honey, or curcumin at 0.25 g and 0.5 g was tested for structural, mechanical, and antibacterial changes. Curcumin blends were the most compatible and rigid and showed the strongest antibacterial effects, with 0.25 g curcumin increasing tensile strength and elongation while decreasing crystallinity.
Key findings
- XRD and SEM showed that blending chitosan with curcumin decreased the crystallinity of the chitosan matrix due to increased intermolecular hydrogen bonding, which reduced close packing of the CS matrix; curcumin films were more rigid and compatible than cellulose- or honey-blended films.
- Mechanical testing showed that 0.25 g curcumin significantly increased tensile strength and elongation at break (p ≤ 0.05) while decreasing Young’s modulus; 0.5 g curcumin had tensile strength higher than pure CS but lower than 0.25 g, with elongation significantly increased and Young’s modulus significantly decreased (p ≤ 0.05).
- Antibacterial testing showed pure CS had a mild effect against E. coli and no effect against S. aureus; CS/Cel films had a strong significant antimicrobial effect against both E. coli and S. aureus, especially at 0.25 g.
- For CS/Cur, the antibacterial effect against E. coli decreased at 0.25 g and then significantly increased at 0.5 g (p ≤ 0.05), while against S. aureus it significantly increased sharply at 0.25 g and disappeared at 0.5 g; at 0.5 g, the Cur blend showed the highest significant reduction against E. coli, followed by the Cel blend.
Methods
- Experimental film study: chitosan films were blended with cellulose, honey, or curcumin at different concentrations and prepared by casting; pure chitosan films were used for comparison.
- Characterization included XRD (5°–35° 2θ), FTIR (3900–700 cm⁻¹, 64 scans), SEM, tensile testing on 5 cm × 5 cm strips, and antibacterial testing by shake-flask method against Staphylococcus aureus (ATCC 6538) and Escherichia coli (ATCC 25922).
- Statistical analysis used one-way ANOVA and Duncan’s test with SPSS 15.0; differences were considered significant at p ≤ 0.05, and data were presented as mean ± standard deviation, with tests repeated three times.
Limitations
- Stated limitations: Not stated in the paper.
- Evident from the text: only two additive concentrations (0.25 g and 0.5 g) per blend were tested, and no in vivo wound-healing, cytotoxicity, or biocompatibility assays are reported despite wound-dressing application claims.
- Evident from the text: antibacterial testing was limited to two bacterial strains (S. aureus and E. coli), and XRD crystallinity changes are described qualitatively through peak shifts, intensity, and broadening rather than quantified crystallinity values.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures










![Figure 11 Tensile strength (a), Young’s modulus (b) and % elongation at break (c) for pure CS and CS-blended samples at different concentrations [* means that there is a significant change (p ≤ 0.05)].](https://figures.cochat.ai/paper-figures/f41a5094388149e3b3e5ee9441c708d7/improvement-of-chitosan-films-properties-by-blending-with-cellulose-honey-and-figure-11.jpg)
![Figure 12 Tensile strength for pure CS and CS-blended samples at 0.25 g (a) and 0.5 g (b) [* means that there is a significant change (p ≤ 0.05)].](https://figures.cochat.ai/paper-figures/828d818e422b48359cefd15028a9494c/improvement-of-chitosan-films-properties-by-blending-with-cellulose-honey-and-figure-12.jpg)
![Figure 13 Young’s modulus for pure CS and CS-blended samples at 0.25 g (a) and 0.5 g (b) [* means that there is a significant change (p ≤ 0.05)].](https://figures.cochat.ai/paper-figures/5cc6208e68a84b92a7fce6df607dd10b/improvement-of-chitosan-films-properties-by-blending-with-cellulose-honey-and-figure-13.jpg)
![Figure 14 Percent elongation at break for pure CS and CS-blended samples at 0.25 g (a) and 0.5 g (b) [* means that there is a significant change (p ≤ 0.05)].](https://figures.cochat.ai/paper-figures/02e7a49386cb4d6ba6a1b9719f7b368c/improvement-of-chitosan-films-properties-by-blending-with-cellulose-honey-and-figure-14.jpg)
Verification
Claims the paper makes
0 Valid · 0 Not valid · 78 Not checked · 63 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“There was a small increase in the frequency of C=O stretching of amide I (1632 cm−1) by increasing H concentrations.”
§ Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin > 3. Results & Discussion > 3.2. FTIR Spectroscopy
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“From the FTIR graphs, it is observed that the frequency of N–H bending of amide II (1556 cm−1) decreases with increasing Cel concentrations.”
§ Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin > 3. Results & Discussion > 3.2. FTIR Spectroscopy
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Furthermore, C–H stretching at 2879 cm−1 and O–H stretching overlapping NH2 vibration at 3000–3500 cm−1 increase with increasing Cur concentrations.”
§ Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin > 3. Results & Discussion > 3.2. FTIR Spectroscopy
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The broad peak of (2θ = 22°) was shifted to the lower positions of 19.3° and 18.6° at 0.25 g H and 0.5 g H, respectively.”
§ Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin > 3. Results & Discussion > 3.1. X-ray Diffraction (XRD)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“C–H stretching at 2879 cm−1 decreases with increasing Cel concentrations.”
§ Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin > 3. Results & Discussion > 3.2. FTIR Spectroscopy
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
58 more claims
Create a free account to see all 141 claims and to verify the 143 references still open.
- It may state two separate claims as one. 75
- The quote only partly states this claim. 1
- Probably not a substantial claim. 4
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
§ Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin > 3. Results & Discussion > 3.4. Mechanical Properties
“This will make CS-blend Cur films more rigid than pure CS films [33,37,82].”
§ Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin > 3. Results & Discussion > 3.4. Mechanical Properties
“There was a significant decrease in modulus (p ≤ 0.05) in cases of H and Cur blends in comparison to the pure. The contrary was observed in the case of Cel. The reduction in modulus makes the film more elastic.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin > 3. Results & Discussion > 3.1. X-ray Diffraction (XRD)
“The peak at 2θ = 17° was slightly shifted to 17.3°, appearing as a hump at 0.25 g Cur and at 17.2° at 0.5 g Cur. The broad peak at 2θ =22° appeared at 20.5° with decreasing intensity and less broadness in the case of 0.25 g Cur, while that of 0.5 g Cur appeared at 22.4° as the pure but broader peak.”
§ Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin > 3. Results & Discussion > 3.1. X-ray Diffraction (XRD)
“The peak at 2θ = 17° appeared at higher positions (18.2° and 18.5° for both Cur concentrations, respectively). The broad peak (2θ = 22.4°) was slightly shifted to lower positions (21.1° and 21.5°) in both concentrations of curcumin, respectively.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin > 3. Results & Discussion > 3.1. X-ray Diffraction (XRD)
“For pure CS, 2θ = 11.4° did not appear”
§ Improvement of Chitosan Films Properties by Blending with Cellulose, Honey and Curcumin > 3. Results & Discussion > 3.1. X-ray Diffraction (XRD)
“Peaks around 2θ = 9.4°, 2θ = 11.4°, 2θ = 17°, and 2θ = 23.1° were observed.”
Citations
Cites
Scanning Electron Microscopy and X-Ray Microanalysis
Goldstein, J. I., Newbury, D. E., Michael, J. R., Ritchie, N. W. M., Scott, J. H. J., & Joy, D. C. (2018) · Springer eBooks · doi:10.1007/978-1-4939-6676-9 · Cited by 5,361
Chitosan-based biomaterials for tissue engineering
Croisier, F., & Jérôme, C. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.009 · Cited by 2,149
Electron Energy-Loss Spectroscopy in the Electron Microscope
Egerton, R. F. (2011) · Springer eBooks · doi:10.1007/978-1-4419-9583-4 · Cited by 1,850
Estimation of lattice strain in ZnO nanoparticles: X-ray peak profile analysis
Bindu, P., & Thomas, S. (2014) · Journal of Theoretical and Applied Physics · doi:10.1007/s40094-014-0141-9 · Cited by 1,627
Chitosan as a Wound Dressing Starting Material: Antimicrobial Properties and Mode of Action
Matica, M. A., Aachmann, F. L., Tøndervik, A., Sletta, H., & Ostafe, V. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20235889 · Cited by 818
Bacterial cellulose and bacterial cellulose–chitosan membranes for wound dressing applications
Lin, W.-C., Lien, C.-C., Yeh, H.-J., Yu, C.-M., & Hsu, S.-H. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.076 · Cited by 686
Sun, L., Sun, J., Chen, L., Niu, P., Yang, X., & Guo, Y. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.01.016 · Cited by 560
Physical, structural and antimicrobial properties of poly vinyl alcohol–chitosan biodegradable films
Bonilla, J., Fortunati, E., Atarés, L., Chiralt, A., & Kenny, J. M. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.07.002 · Cited by 518
Chitosan-Based Functional Materials for Skin Wound Repair: Mechanisms and Applications
Feng, P., Luo, Y., Ke, C., Qiu, H., Wang, W., Zhu, Y., Hou, R., Xu, L., & Wu, S. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.650598 · Cited by 491
Natural and Synthetic Biomedical Polymers
(2014) · Elsevier eBooks · doi:10.1016/c2011-0-07330-1 · Cited by 445
Research works printed but not linked: 5
- Medhi, 2008, Topical application of honey in the treatment of wound healing: A metaanalysis, JK Sci., 10, 171603
- Mohamed, 2015, Synthesis of new benzofuran derivatives and evaluation of their antimicrobial activities, Res. J. Pharm. Biol. Chem. Sci., 6, 213
- Mejenom, 2018, X-Ray diffraction and infrared spectroscopic analysis of solid biopolymer electrolytes based on dual blend carboxymethyl cellulose-chitosan doped with ammonium bromide, ASM Sci. J., 11, 37
- Bhuvaneshwari, 2011, Development and characterization of chitosan film, Int. J. Eng. Res. Appl., 183, 254
- Sasikala, 2013, Manuka honey loaded chitosan hydrogel films for wound dressing applications, Int. J. PharmTech Res., 5, 1774
Cited by
Advances in chitosan-based blends as potential drug delivery systems: A review
Saadh, M. J., Hsu, C., Mustafa, M. A., Faisal, A., Kaur, I., Ghildiyal, P., Ali, A.-J. A., Adil, M., Ali, M. S., Alsaikhan, F., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132916 · Cited by 54
Ji, Q., Zhou, J., Ding, W., Wu, Y., Liu, C., Yu, K., Zhang, N., Jin, G., Lu, P., Bao, D., et al. (2023) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2023.101212 · Cited by 42
Ma, Y., Chen, J., Song, Z., WanLin, W., Cao, Y., & Yu, Q. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141124 · Cited by 36
Plota-Pietrzak, A., Pęśko, M., Fotiadou, R., Pavlidis, Ι. V., & Masek, A. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01543 · Cited by 27
Shamsuri, N. A. B., Majid, S. R., Hamsan, M. H., Halim, S. N. A., Manan, N. S. A., Sulaiman, M., Jahidin, A. H., Halim, N. A., Aziz, S. B., & Kadir, M. F. Z. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.55303 · Cited by 25
Adhikary, N. D., Bains, A., Tosif, M. M., Chawla, P., Ali, N., Ansari, M. A., Dhull, S. B., & Gökşen, G. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132915 · Cited by 25
Pistone, A., de Gaetano, A., Piperopoulos, E., & Abate, C. (2023) · Materials · doi:10.3390/ma16175850 · Cited by 16
Shamsuri, N. A. B., Halim, S. N. A., Aziz, S. B., Abdulwahid, R. T., Alias, Y. B., & Kadir, M. F. Z. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113909 · Cited by 15
Chitosan Films Loaded with Alginate Nanoparticles for Gentamicin Release on Demand
Bueno, C. Z., Wiggers, H. J., Chevallier, P., Copes, F., & Mantovani, D. (2025) · Polymers · doi:10.3390/polym17162261 · Cited by 14
Li, X., Chen, H., Gasti, T., Júnior, L. M., Vieira, R. P., Filho, J. G. D. O., & Tian, W. (2025) · Current Research in Food Science · doi:10.1016/j.crfs.2025.101292 · Cited by 14
Liu, G., Shi, K., Sun, H., Yang, B., & Weng, Y. (2023) · Polymers · doi:10.3390/polym15132811 · Cited by 14
Khemkaew, P., Jaisan, C., Kingwascharapong, P., Rawdkuen, S., Karbowiak, T., Degraeve, P., Sai‐Ut, S., Sangsawad, P., Kraithong, S., & Kaewprachu, P. (2025) · LWT · doi:10.1016/j.lwt.2025.118053 · Cited by 12
Research Progress on the Application of Natural Medicines in Biomaterial Coatings
Wang, Y., Duan, H., Zhang, Z., Chen, L., & Li, J. (2024) · Materials · doi:10.3390/ma17225607 · Cited by 10
Rakkan, T., Topham, P. D., Mahomed, A., Tighe, B. J., Derry, M. J., Krasian, T., Tanadchangsaeng, N., Srikaew, N., Somsunan, R., Jantanasakulwong, K., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.148185 · Cited by 10
Kassahun, S. K., Getaye, A., Τσίγκου, Κ., & Angelidaki, İ. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.105455 · Cited by 10
Rotary Friction Welding of Dissimilar Polymer Rods Containing Metal Powder
Kuo, C.-C., Chen, H., & Huang, S.-H. (2023) · Polymers · doi:10.3390/polym15224354 · Cited by 9
Dissanayake, K. K., Kurniawan, T. A., Sarangi, P. K., Abdulkareem-Alsultan, G., Goh, H. H., Wong, H. Y., Onn, C. W., Tharikulislam, M., Aziz, F., Othman, M. H. D., et al. (2025) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2025.108837 · Cited by 8
Romano, S., Santis, S. D., Frezza, C., Malvagna, B., Rocco, D., Sotgiu, G., & Orsini, M. (2025) · ChemPlusChem · doi:10.1002/cplu.202500072 · Cited by 7
Srihanam, P., Phromsopha, T., Sangdee, A., Khotsaeng, N., Lan, P. N., & Baimark, Y. (2025) · Polymers · doi:10.3390/polym17182460 · Cited by 6
Hoang, H. Y., Nguyen, H. T. N. H., Dung, M. B., Tran, V. N. T., Doan, V., & Le, V. T. (2026) · RSC Advances · doi:10.1039/d5ra08574h · Cited by 6
Mechanically enhanced chitosan hydrogels based on micellar cross-linking for wound hemostasis
Liu, Y., Li, S., Zhu, J., Fan, L., & Wang, L. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.144231 · Cited by 5
Karabulut, G., Mundada, V., Kapoor, R., & Feng, H. (2026) · Food Chemistry X · doi:10.1016/j.fochx.2026.103824 · Cited by 4
The sensitivity of chitosan/TiO2 film on ammonia detection
Nainggolan, I., Wadana, W. T., Nasution, T. I., & Sembiring, A. (2024) · Materials Today Proceedings · doi:10.1016/j.matpr.2024.03.013 · Cited by 4
Dodangeh, F., Pontillo, A. R. N., Chen, S., Welton, T., Xu, C. (., & Rohani, S. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.108342 · Cited by 3
Hafeez, M., Raza, Z. A., Khan, A., Latif, S., Riaz, T., & Rızwan, Z. (2026) · Cellulose · doi:10.1007/s10570-026-06936-1 · Cited by 3
Miao, Z., Wu, J., Wang, Q., Yu, L., & Chen, R. (2026) · Industrial Crops and Products · doi:10.1016/j.indcrop.2026.122879 · Cited by 3
Erian, G. R., Abdelmonem, N., Abdelghany, A., Abou-Shady, H., & Rahman, R. O. A. (2026) · Scientific Reports · doi:10.1038/s41598-026-43155-x · Cited by 3
Eco-friendly functionalization of viscose with bioactive plant extracts
Ivanovic, V., Suručić, R. V., Šmitran, A., Borković, A., Lazić, B., Janjić, S., & Kostić, M. (2025) · Journal of Engineered Fibers and Fabrics · doi:10.1177/15589250251368306 · Cited by 3
Sharma, N., Baruah, D. J., Duarah, R., Yadav, A., Bora, D., Saikia, R., Jayaramudu, J., & Das, M. R. (2025) · ACS Sensors · doi:10.1021/acssensors.5c00038 · Cited by 3
Abo-Elmaaref, M., Mohamed, W. S., & Swielam, E. M. (2025) · Discover Applied Sciences · doi:10.1007/s42452-025-07454-8 · Cited by 2
Zehra, A., Wani, S. M., Bashir, I., Amin, T., Zargar, I. A., Mir, S. A., Manzar, A., Begum, S., & Gulzar, B. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.149441 · Cited by 2
Begimova, G., Kuldanova, A., Kuxina, I., & Chinibekova, N. (2026) · Macromol—A Journal of Macromolecular Research · doi:10.3390/macromol6030045 · Cited by 2
Regmi, S., & Janaswamy, S. (2026) · Food Bioscience · doi:10.1016/j.fbio.2026.109491 · Cited by 2
Ayele, A. T., Eke, M. O., & Adah, C. A. (2026) · Journal of Food Protection · doi:10.1016/j.jfp.2026.100870 · Cited by 2
Recovered Carbon Black Filler Improves the Properties of Chitosan 3-Dimensional Composites
Sahaid, M. N. F. M., Xin, L. J., Bonnia, N. N., & Jaafar, S. N. S. (2024) · Polymer Science Series A · doi:10.1134/s0965545x24600777 · Cited by 2
Eco-friendly Bio-films from Wheat Straw Cellulose and Chitosan for Sustainable Food Packaging
Vanshpati, R., Singh, G. P., Tiwari, A. K., & Gakkhar, N. (2025) · Fibers and Polymers · doi:10.1007/s12221-025-01112-x · Cited by 1
Song, Y., Kang, S., Huang, M., Wu, Y., Lv, Y., & Xue, C. (2025) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2025.109044 · Cited by 1
Ler, F. T. K., Maki, M. A. A., Rajagopal, M. S., Karthikeyan, R., & Kumar, P. V. (2025) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-025-00512-y · Cited by 1
Xu, Y., Wei, X., Deng, W., & Chen, H. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11986-0 · Cited by 1
Self-layered fruit preservation coating based on chitosan and curcumin
Li, H., Qian, L., Zhao, Q., Cheng, K., Yu, F., Yang, J., Jiang, Q., Sun, N., Wang, X., & Qin, Z. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.151290 · Cited by 1
Devesa, S., Relva, M., Leitão, C. M. A., Faia, P., Carvalho, S., & Santo, D. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.153072 · Cited by 1
Yuan, J., Liu, X., Li, M., Feng, J., Cui, B., Chen, J., Li, C., & Wang, F. (2026) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2026.125625 · Cited by 1
Silva, H. S., Zanoli, A. P. F. A., Barbosa, H. F. G., & Pedro, R. D. O. (2026) · Food Science and Biotechnology · doi:10.1007/s10068-026-02245-2 · Cited by 1
Self-reinforced chitosan composites for high-performance food packaging
Chumpon, P., Li, M., & Song, J. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.153678 · Cited by 1
Targba, S. H., Agbidye, I. G., Ikese, C. O., & Nezuami, N. (2025) · Research Square · doi:10.21203/rs.3.rs-7437069/v1
Naseri, M., Kamal, Z., & Esmaeili, E. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-06095-6
Fatoni, A. S., Umli, A. F., & Sriwijaya, R. A. (2025) · Chimica et Natura Acta · doi:10.24198/cna.v13.n3.62946
Impressão de filmes de quitosano e extrato de própolis com propriedades antimicrobianas
Rodrigues, S. C. V. (2024) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Influence of Honey on Structural, Morphology and Thermal Behavior of Zein-Based Polymer Systems
Shamsuri, N. A. B., Aziz, S. B., Halim, S. N. A., Rusdi, H., & Kadir, M. F. Z. (2025) · JOURNAL OF POLYMER MATERIALS · doi:10.32604/jpm.2025.070939
Active Biodegradable Chitosan–Nerium Oleander Films for Browning Prevention in Fresh-Cut ApplesPreprint
Bourd, Y., Mouzahim, M. E., Eddarai, E. M., Nassif, A., Abdelmoumen, H., BELLAOUCHOU, A., & Boussen, R. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6041241
Pereira, P. K. G. (2024) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas)
Multifunctional Finishing of Viscose Fabric with Pomegranate Peel Extract
Ivanovic, V., Korica, M., Suručić, R. V., Bozic, L., Dojcinovic, I., Janjić, S., & Kostić Mirjana, M. (2026) · Materials · doi:10.3390/ma19050929
Chaturvedi, E., Roy, P., Pal, S., Hossain, A., & Ahuja, M. (2026) · ACS Applied Nano Materials · doi:10.1021/acsanm.6c01214
Chitosan-A Versatile Biopolymer: Fabrications, Properties, and Clinical Promise
Roychowdhury, V., Ghosh, P. P., Ghosh, S., Sarkar, S., Kundu, A., Pal, B. K., & Ray, M. (2026) · International Journal of Drug Delivery Technology · doi:10.25258/ijddt.16.60s.108
Guo, X., Zhang, X., Zhang, T., Liu, S., Chen, S., Chen, L., Wu, W., & Wang, L. (2026) · Food Research International · doi:10.1016/j.foodres.2026.119982
Li, L., Lv, Q., Wang, Y., Gu, W., Zhang, J., Gu, X., Sun, J., & Zhang, S. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.153773
Singh, L., Sharma, S., Basumatary, B., Hassan, Z., Rashmi, & Jain, H. (2026) · Hybrid Advances · doi:10.1016/j.hybadv.2026.100731
Valorization of Durian Rind Into Functional Cellulose–Chitosan Films for Sustainable Food Packaging
Wonoputri, V., Evelyn, M., Elizabeth, & Shofinita, D. (2026) · Journal of Food Process Engineering · doi:10.1111/jfpe.70773
Li, Z., Chen, W., Yang, Q., Guo, J., Zhang, X., Ji, X., Guan, F., He, J., & Xu, Y. (2026) · Materials Today Chemistry · doi:10.1016/j.mtchem.2026.104044
Chitosan-based substrates for printed transient piezoresistive sensors
Abreu, R. G., Morais, M., Calmeiro, T., Martins, F., Oliveira, D. B., Fortunato, E. M. C., Martins, R., Almeida, H., & Carlos, E. (2026) · Materials Today Electronics · doi:10.1016/j.mtelec.2026.100236
Lu, Y., Li, X., Zhou, J., Peng, X., Yang, Y., & Shen, L. (2026) · Food Research International · doi:10.1016/j.foodres.2026.120724
Kusumastuti, E., Priyangga, A., Wafi, A., Rosyidah, A., Ediati, R., Fansuri, H., Santoso, M., & Atmaja, L. (2026) · South African Journal of Chemical Engineering · doi:10.1016/j.sajce.2026.101022
Fatoni, A., Wulandari, N., Hilma, H., & Hidayati, N. (2026) · Indonesian Journal of Chemistry · doi:10.22146/ijc.114008
Ahmad, R., Teklemedhin, T. B., Ali, A., Hossain, N., Ali, S. A., Tariq, Z., Ahmed, M., Li, M., Zhang, B., & Li, H. (2026) · Advanced Sustainable Systems · doi:10.1002/adsu.70682
Othman, S. H., Adnan, S. S. C., Nordin, N., Hosni, S., Zakaria, R., & Talib, R. A. (2026) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2026.101292
Sim, J., Lee, K. E., & Kim, J. (2026) · Polymers · doi:10.3390/polym18222884
Metadata
- Authors
- Madian, N. G., El-Ashmanty, B. A., & Abdel-Rahim, H. K.
- Affiliations
- Cairo University (EG)
- Corresponding author
- Madian, Noha G.
- ORCID
- Madian, Noha G.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2023-06-06
- Volume
- 15
- Issue
- 12
- Pages
- 2587
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC10304598
- OpenAlex
- W4379798771
- Cited by
- 66
- References
- 80
- Citations by year
- 2026: 29 · 2025: 24 · 2024: 9 · 2023: 4
- FWCI
- 3.29
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Funders
- Cairo University
- Faculty of Science, Cairo University
- Topics
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposite Synthesis and Irradiation
- Keywords
- chitosan films, polymer blending, cellulose, honey, curcumin, antibacterial activity, crystallinity, hydrogen bonding, wound dressings, biopolymer films
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.