CoChat

Research on Position Control of an Electro–Hydraulic Servo Closed Pump Control System

Open access

The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.

Abstract

A control strategy combining adaptive backstep sliding mode control and dead-zone inverse compensation control in a series was proposed to solve the problem of system parameter uncertainty and system dead-zone in the process of position control in an electro–hydraulic servo closed pump control system. Firstly, an adaptive backstepping sliding mode controller was designed by introducing the sliding mode control principle. Secondly, the smooth dead-zone inverse function was constructed by using the smooth continuous index function to design the dead-zone inverse compensation controller, which is combined with the adaptive sliding mode controller to form a series controller. Finally, the feasibility of the controller was verified by using the pump control servo system of a lithium battery pole strip mill. The experimental results show that, compared with traditional PID control, the control strategy displayed no excessive overshoot before the steady state, the steady-state control accuracy could reach ±0.002 mm, and the time required to reach the steady state was 1 s to 2 s shorter, which shows this method’s ability to effectively improve the position control accuracy of the pump control system, as well as its dynamic response performance.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/pr10091674

Cites

32 of 32 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Schematic diagram of electro-hydraulic servo closed-pump control system. 1: servo motor; 2: fixed displacement pump; 3/4: one-way valve; 5: accumulator; 6/7: one-way valve; 8/9: solenoid directional valve; 10: hydraulic cylinder. A and B represent the two chambers of the oil cylinder respectively.
Figure 1 Schematic diagram of electro-hydraulic servo closed-pump control system. 1: servo motor; 2: fixed displacement pump; 3/4: one-way valve; 5: accumulator; 6/7: one-way valve; 8/9: solenoid directional valve; 10: hydraulic cylinder. A and B represent the two chambers of the oil cylinder respectively.CC-BY · From the PDF
Figure 2 Flow distribution of hydraulic pump. Figure 2. Flow distribution of hydraulic pump.
Figure 2 Flow distribution of hydraulic pump. Figure 2. Flow distribution of hydraulic pump.CC-BY · From the PDF
Figure 3 Block diagram of pump control system. Figure 3. Block diagram of pump control system.
Figure 3 Block diagram of pump control system. Figure 3. Block diagram of pump control system.CC-BY · From the PDF
Figure 4 Series control block diagram of pump control system. Figure 4. Series control block diagram of pump control system.
Figure 4 Series control block diagram of pump control system. Figure 4. Series control block diagram of pump control system.CC-BY · From the PDF
Image 5
CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Figure 7 System positive dead-zone curve. The red line is the displacement curve cylinder in the positive dead-zone of the system, and the blue line is the reference l the compensation principle, which is used to obtain the estimated parameters of th Figure 7. System positive dead-zone curve. The red line is the displacement curve of the hydraulic cylinder in the positive dead-zone of the system, and the blue line is the reference line based on the compensation principle, which is used to obtain the estimated parameters of the dead-zone.
Figure 7 System positive dead-zone curve. The red line is the displacement curve cylinder in the positive dead-zone of the system, and the blue line is the reference l the compensation principle, which is used to obtain the estimated parameters of th Figure 7. System positive dead-zone curve. The red line is the displacement curve of the hydraulic cylinder in the positive dead-zone of the system, and the blue line is the reference line based on the compensation principle, which is used to obtain the estimated parameters of the dead-zone.CC-BY · From the PDF
30 40 Figure 8. System negative dead-zone curve. The red line is the displacement curve of the hydraulic cylinder in the negative dead-zone of the system, and the blue line is the reference line based on the compensation principle, which is used to obtain the estimated parameters of the dead-zone.
30 40 Figure 8. System negative dead-zone curve. The red line is the displacement curve of the hydraulic cylinder in the negative dead-zone of the system, and the blue line is the reference line based on the compensation principle, which is used to obtain the estimated parameters of the dead-zone.CC-BY · From the PDF
Figure 9 Experimental platform. Figure 9. Experimental platform.
Figure 9 Experimental platform. Figure 9. Experimental platform.CC-BY · From the PDF
Figure 10 Rolling mill pump control AGC control frame. Figure 10. Rolling mill pump control AGC control frame.
Figure 10 Rolling mill pump control AGC control frame. Figure 10. Rolling mill pump control AGC control frame.CC-BY · From the PDF
Figure 11 Displacement tracking curve. ( a ) Displacement 0.1 mm; ( b ) displacement 0.05 mm; ( c ) displacement 0.01 mm. Figure 11. Displacement tracking curve. ( a ) Displacement 0.1 mm; ( b ) displacement 0.05 mm; ( c ) displacement 0.01 mm.
Figure 11 Displacement tracking curve. ( a ) Displacement 0.1 mm; ( b ) displacement 0.05 mm; ( c ) displacement 0.01 mm. Figure 11. Displacement tracking curve. ( a ) Displacement 0.1 mm; ( b ) displacement 0.05 mm; ( c ) displacement 0.01 mm.CC-BY · From the PDF
Figure 12 Error curve. ( a ) Error with displacement of 0.1 mm; ( b ) error with displacement of 0.05 mm; ( c ) error with displacement of 0.01 mm. Figure 12. Error curve. ( a ) Error with displacement of 0.1 mm; ( b ) error with displacement of 0.05 mm; ( c ) error with displacement of 0.01 mm.
Figure 12 Error curve. ( a ) Error with displacement of 0.1 mm; ( b ) error with displacement of 0.05 mm; ( c ) error with displacement of 0.01 mm. Figure 12. Error curve. ( a ) Error with displacement of 0.1 mm; ( b ) error with displacement of 0.05 mm; ( c ) error with displacement of 0.01 mm.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 5

  1. Ji, 2020, Sliding mode backstepping control method for valve-controlled electro–hydraulic Position Servo System, J. Cent. South Univ. Sci. Technol., 51, 1518
  2. Han, 2014, Fractional integral sliding mode nonlinear control of electro–hydraulic flight turntable, J. Beijing Univ. Aeronaut. Astronaut., 40, 1411
  3. Guo, 2020, Design of primary mirror position control system for large aperture telescope, Acta Opt. Sin., 40, 122
  4. Hao, 2020, Research on position control characteristics of hybrid linear drive system, Trans. Chin. Soc. Agric. Mach., 51, 379
  5. Wang, 2021, ADRC for Electro–hydraulic Position Servo Systems Based on Dead-zone Compensation, China Mech. Eng., 32, 1432

Metadata

Authors
Wang, F., Chen, G., Liu, H., Yan, G., Zhang, T., Liu, K., Liu, Y., & Ai, C.
Affiliations
  • Yanshan University (CN)
  • Xinjiang Institute of Engineering (CN)
Corresponding author
Chen, Gexin
Venue
Processes
Publisher
MDPI AG
Published
2022-08-23
Volume
10
Issue
9
Pages
1674
ISSN
2227-9717 (ISSN-L)
OpenAlex
W4292877811
Cited by
10
References
32
Citations by year
2026: 3 · 2025: 2 · 2024: 3 · 2023: 2
FWCI
0.66
Type
journal article
Language
en
Open access
Locations
  • Processes (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Key R&D Projects in Hebei Province (20314402D, ZD2020166, ZD2021340, 2022D01A51, XJEDU2021Y050, ZYYD2022C09)
  • Key Project of Science and Technology Research in Hebei Province (20314402D, ZD2020166, ZD2021340, 2022D01A51, XJEDU2021Y050, ZYYD2022C09)
  • Project supported by the Natural Science Foundation of Xinjiang Uygur Autonomous Region (20314402D, ZD2020166, ZD2021340, 2022D01A51, XJEDU2021Y050, ZYYD2022C09)
  • Project of Scientific Research Plan of Colleges and Universities in Xinjiang Uygur Autonomous Region (20314402D, ZD2020166, ZD2021340, 2022D01A51, XJEDU2021Y050, ZYYD2022C09)
  • The central government guides local science and technology development special fund projects (20314402D, ZD2020166, ZD2021340, 2022D01A51, XJEDU2021Y050, ZYYD2022C09)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Hydraulic and Pneumatic Systems
  • Physical Sciences › Engineering › Control and Systems Engineering › Adaptive Control of Nonlinear Systems
  • Physical Sciences › Engineering › Mechanical Engineering › Control Systems in Engineering
Keywords
electro-hydraulic servo system, position control, adaptive backstepping sliding mode control, dead-zone compensation, parameter uncertainty, control accuracy, dynamic response

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.