Highly Selective CO2 Capture on Waste Polyurethane Foam-Based Activated Carbon
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Low-cost activated carbons were prepared from waste polyurethane foam by physical activation with CO2 for the first time and chemical activation with Ca(OH)2, NaOH, or KOH. The activation conditions were optimized to produce microporous carbons with high CO2 adsorption capacity and CO2/N2 selectivity. The sample prepared by physical activation showed CO2/N2 selectivity of up to 24, much higher than that of chemical activation. This is mainly due to the narrower microporosity and the rich N content produced during the physical activation process. However, physical activation samples showed inferior textural properties compared to chemical activation samples and led to a lower CO2 uptake of 3.37 mmol·g−1 at 273 K. Porous carbons obtained by chemical activation showed a high CO2 uptake of 5.85 mmol·g−1 at 273 K, comparable to the optimum activated carbon materials prepared from other wastes. This is mainly attributed to large volumes of ultra-micropores (<1 nm) up to 0.212 cm3·g−1 and a high surface area of 1360 m2·g−1. Furthermore, in consideration of the presence of fewer contaminants, lower weight losses of physical activation samples, and the excellent recyclability of both physical- and chemical-activated samples, the waste polyurethane foam-based carbon materials exhibited potential application prospects in CO2 capture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Understanding chemical reactions between carbons and NaOH and KOH
Lillo-Ródenas, M. A., Cazorla-Amorós, D., & Linares-Solano, A. (2003) · Carbon · doi:10.1016/s0008-6223(02)00279-8 · Cited by 1,199
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Singh, G., Kim, I. Y., Lakhi, K. S., Srivastava, P., Naidu, R., & Vinu, A. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.015 · Cited by 379
Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Fungi-based porous carbons for CO2 adsorption and separation
Wang, J., Heerwig, A., Lohe, M. R., Oschatz, M., Borchardt, L., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32139d · Cited by 220
Sustainable and hierarchical porous Enteromorpha prolifera based carbon for CO2 capture
Zhang, Z., Wang, K., Atkinson, J. D., Yan, X., Li, X., Rood, M. J., & Yan, Z. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.05.094 · Cited by 120
Superior carbon-based CO2 adsorbents prepared from poplar anthers
Song, J., Shen, W., Wang, J., & Fan, W. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.024 · Cited by 99
Cited by
Shafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
The Potentiality of Rice Husk-Derived Activated Carbon: From Synthesis to Application
Alam, M. M., Hossain, M. A., Hossain, M. D., Johir, M. A. H., Hossen, J., Rahman, M. S., Zhou, J. L., Hasan, A. T. M. K., Karmakar, A. K., & Ahmed, M. B. (2020) · Processes · doi:10.3390/pr8020203 · Cited by 165
Ligero, A., Calero, M., Pérez, A., Solís, R. R., Muñoz-Batista, M. J., & Martín-Lara, M. Á. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2023.03.041 · Cited by 89
Pérez-Huertas, S., Calero, M., Ligero, A., Pérez, A., Terpiłowski, K., & Martín-Lara, M. A. (2023) · Waste Management · doi:10.1016/j.wasman.2023.02.022 · Cited by 45
Pereira, L., Castillo, V., Calero, M., Blázquez, G., Solís, R. R., & Martín-Lara, M. Á. (2024) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2024.105386 · Cited by 45
Development of high-performance CO2 adsorbents from urea-modified Leucaena leucocephala hydrochar
Amer, N. M., Shafawi, A. N., Lahijani, P., Mohammadi, M., & Mohamed, A. R. (2025) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-025-06634-1 · Cited by 1
Metadata
- Authors
- Ge, C., Lian, D., Cui, S., Gao, J., & Lu, J.
- Venue
- Processes
- Publisher
- MDPI AG
- Published
- 2019-09-03
- Volume
- 7
- Issue
- 9
- Pages
- 592
- ISSN
- 2227-9717 (ISSN-L)
- OpenAlex
- W2972024590
- Cited by
- 42
- References
- 8
- FWCI
- 2.51
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.