Thermal Biomass Conversion: A Review
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
In this paper, the most important methods of thermal conversion of biomass, such as: hydrothermal carbonization (180–250 °C), torrefaction (200–300 °C), slow pyrolysis (carbonization) (300–450 °C), fast pyrolysis (500–800 °C), gasification (800–1000 °C), supercritical steam gasification, high temperature steam gasification (>1000 °C) and combustion, were gathered, compared and ranked according to increasing temperature. A comprehensive model of thermal conversion as a function of temperature, pressure and heating rate of biomass has been provided. For the most important, basic process, which is pyrolysis, five mechanisms of thermal decomposition kinetics of its components (lignin, cellulose, hemicellulose) were presented. The most important apparatuses and implementing devices have been provided for all biomass conversion methods excluding combustion. The process of combustion, which is energy recycling, was omitted in this review of biomass thermal conversion methods for two reasons. Firstly, the range of knowledge on combustion is too extensive and there is not enough space in this study to fully discuss it. Secondly, the authors believe that combustion is not an environmentally-friendly method of waste biomass utilization, and, in the case of valuable biomass, it is downright harmful. Chemical compounds contained in biomass, such as biochar, oils and gases, should be recovered and reused instead of being simply burnt—this way, non-renewable fuel consumption can be reduced.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
A review on bio-oil production from biomass by using pyrolysis method
Isahak, W. N. R. W., Hisham, M. W. M., Yarmo, M. A., & Yun Hin, T.-Y. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.039 · Cited by 624
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Acetic acid and lithium chloride effects on hydrothermal carbonization of lignocellulosic biomass
Lynam, J. G., Coronella, C. J., Yan, W., Reza, M. T., & Vasquez, V. R. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.02.035 · Cited by 260
Basu, P. (2018) · Biomass Gasification, Pyrolysis and Torrefaction · doi:10.1016/b978-0-12-812992-0.00007-8 · Cited by 233
Mäkelä, M., Benavente, V., & Fullana, A. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.06.022 · Cited by 225 · cited 1×
“The division limit is determined by the critical parameters of water: critical temperature (374 ◦C) and pressure (22 MPa) of water [159].”
BackgroundSmith, A. M., Whittaker, C., Shield, I., & Ross, A. B. (2018) · Fuel · doi:10.1016/j.fuel.2018.01.143 · Cited by 54
Cited by
Fundamental designs of gasification plants for combined heat and power
Monteiro, E., Ramos, A., & Rouboa, A. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114305 · Cited by 51
Catalytic Processes to Accelerate Decarbonization in a Net-Zero Carbon World
Wang, Y., Tian, Y., Pan, S., & Snyder, S. W. (2022) · ChemSusChem · doi:10.1002/cssc.202201290 · Cited by 39
Kosakowski, W., Bryszewska, M. A., & Dziugan, P. (2020) · Materials · doi:10.3390/ma13214971 · Cited by 39
“The process of thermal conversion of biomass to biofuel may include combustion, gasification, biocarbonization, torrefaction, dry distillation and pyrolysis [4–8].”
Self-citation
Metadata
- Authors
- Lewandowski, W. M., Ryms, M., & Kosakowski, W.
- Venue
- Processes
- Publisher
- MDPI AG
- Published
- 2020-04-27
- Volume
- 8
- Issue
- 5
- Pages
- 516
- ISSN
- 2227-9717 (ISSN-L)
- OpenAlex
- W3019497983
- Cited by
- 167
- References
- 7
- FWCI
- 5.38
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.