The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Titanium Alloys for Dental Implants: A Review
Open accessAbstract
The topic of titanium alloys for dental implants has been reviewed. The basis of the review was a search using PubMed, with the large number of references identified being reduced to a manageable number by concentrating on more recent articles and reports of biocompatibility and of implant durability. Implants made mainly from titanium have been used for the fabrication of dental implants since around 1981. The main alloys are so-called commercially pure titanium (cpTi) and Ti-6Al-4V, both of which give clinical success rates of up to 99% at 10 years. Both alloys are biocompatible in contact with bone and the gingival tissues, and are capable of undergoing osseointegration. Investigations of novel titanium alloys developed for orthopaedics show that they offer few advantages as dental implants. The main findings of this review are that the alloys cpTi and Ti-6Al-4V are highly satisfactory materials, and that there is little scope for improvement as far as dentistry is concerned. The conclusion is that these materials will continue to be used for dental implants well into the foreseeable future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
Plasma sprayed coatings of hydroxylapatite
De Groot, K., Geesink, R., Klein, C. P. A. T., & Serekian, P. (1987) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820211203 · Cited by 1,156
Albrektsson, T. O., & Wennerberg, A. (2004) · PubMed · Cited by 1,118
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Implant biomaterials: A comprehensive review
Saini, M. (2015) · World Journal of Clinical Cases · doi:10.12998/wjcc.v3.i1.52 · Cited by 844
Biocompatibility of Advanced Manufactured Titanium Implants—A Review
Sidambe, A. (2014) · Materials · doi:10.3390/ma7128168 · Cited by 741
Preparation of bioactive titanium metal via anodic oxidation treatment
Yang, B., Uchida, M., Kim, H.-M., Zhang, X., & Kokubo, T. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00626-4 · Cited by 730
On implant surfaces: a review of current knowledge and opinions.
Wennerberg, A., & Albrektsson, T. O. (2010) · PubMed · Cited by 650
Buser, D., Janner, S. F. M., Wittneben, J., Brägger, U., Ramseier, C. A., & Salvi, G. E. (2012) · Clinical Implant Dentistry and Related Research · doi:10.1111/j.1708-8208.2012.00456.x · Cited by 642
Surface Modifications and Their Effects on Titanium Dental Implants
Jemat, A., Ghazali, M. J., Razali, M., & Otsuka, Y. (2015) · BioMed Research International · doi:10.1155/2015/791725 · Cited by 611
Cited by
Khorsandi, D., Fahimipour, A., Abasian, P., Saber, S. S., Seyedi, M., Ghanavati, S., Ahmad, A., De Stephanis, A. A., Taghavinezhaddilami, F., Leonova, A., et al. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.044 · Cited by 428
Fit and forget: The future of dental implant therapy via nanotechnology
Gulati, K., Chopra, D., Kocak-Oztug, N. A., & Verron, E. (2023) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2023.114900 · Cited by 89
Alsharbaty, M. H. M., Naji, G. A., Ghani, B. A., Schagerl, M., Khalil, M. A., & Ali, S. S. (2024) · Scientific Reports · doi:10.1038/s41598-024-68020-7 · Cited by 8
Metadata
- Authors
- W. Nicholson, J.
- Venue
- Prosthesis
- Publisher
- MDPI AG
- Published
- 2020-06-15
- Volume
- 2
- Issue
- 2
- Pages
- 100-116
- ISSN
- 2673-1592 (ISSN-L)
- OpenAlex
- W3034795778
- Cited by
- 461
- References
- 51
- FWCI
- 20.42
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Titanium Alloys for Dental Implants: A Review. https://app.cochat.ai/papers/10.3390/prosthesis2020011
- The paper
- W. Nicholson, J. (2020). Titanium Alloys for Dental Implants: A Review. Prosthesis. https://doi.org/10.3390/prosthesis2020011
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.