Vision-Based Sensor for Early Detection of Periodical Defects in Web Materials
Open accessThe DOI matches its Crossref record; 25 of the 26 references it cites were found in a registry or an index.
Abstract
During the production of web materials such as plastic, textiles or metal, where there are rolls involved in the production process, periodically generated defects may occur. If one of these rolls has some kind of flaw, it can generate a defect on the material surface each time it completes a full turn. This can cause the generation of a large number of surface defects, greatly degrading the product quality. For this reason, it is necessary to have a system that can detect these situations as soon as possible. This paper presents a vision-based sensor for the early detection of this kind of defects. It can be adapted to be used in the inspection of any web material, even when the input data are very noisy. To assess its performance, the sensor system was used to detect periodical defects in hot steel strips. A total of 36 strips produced in ArcelorMittal Avilés factory were used for this purpose, 18 to determine the optimal configuration of the proposed sensor using a full-factorial experimental design and the other 18 to verify the validity of the results. Next, they were compared with those provided by a commercial system used worldwide, showing a clear improvement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures











Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A survey on industrial vision systems, applications and tools
Malamas, E. N., Petrakis, E. G. M., Zervakis, M., Petit, L., & Legat, J.-D. (2003) · Image and Vision Computing · doi:10.1016/s0262-8856(02)00152-x · Cited by 797
Computer-Vision-Based Fabric Defect Detection: A Survey
Kumar, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.1930.896476 · Cited by 725
A Laser-Based Vision System for Weld Quality Inspection
Huang, W., & Kovacevic, R. (2011) · Sensors · doi:10.3390/s110100506 · Cited by 132
A flexible decision support system for steel hot rolling mill scheduling
Cowling, P. (2003) · Computers & Industrial Engineering · doi:10.1016/s0360-8352(03)00038-x · Cited by 98
Designing a defect classification system: A case study
Brzakovic, D. P., & Vujovic, N. S. (1996) · Pattern Recognition · doi:10.1016/0031-3203(95)00166-2 · Cited by 57
Zhang, Z., Gao, Z., Liu, Y.-Y., Jiang, F., Yang, Y., Ren, Y., Yang, H., Yang, K., & Zhang, X.-D. (2011) · Sensors · doi:10.3390/s120100334 · Cited by 40
Calibration of an Inspection System for Online Quality Control of Satin Glass
Adamo, F., Attivissimo, F., & Nisio, A. D. (2010) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2010.2040963 · Cited by 32
Vision-based inspection for periodic defects in steel wire rod production
Park, C., Choi, S., & Won, S. (2010) · Optical Engineering · doi:10.1117/1.3284779 · Cited by 27
Monitoring the performance of the paper making process
Bissessur, Y., Martin, E. B., & Morris, A. J. (1999) · Control Engineering Practice · doi:10.1016/s0967-0661(99)00105-7 · Cited by 26
Chang, C., & Su, C. (1995) · Computers & Industrial Engineering · doi:10.1016/0360-8352(94)00211-5 · Cited by 20
Research works printed but not linked: 6
- Bernie J.P. Trepanier R. A New Technique to Characterize Periodic and Pseudo-Periodic Marks Within a Sheet of Paper Proceedings of the 2007 TAPPI Papermakers and PIMA International Leadership Conference Jacksonville, FL, USA March 2007
- Bernie J. Trepanier R. A new technique for measuring periodic patterns within a paper sheet Pulp Pap. Can. 2009 110 39 42
- Chaplin D. Image analysis: A powerful tool to pinpoint defects and gauge print quality Pap. Age 1998 114 30 31
- Oerley H. Bauereiss U. Strobl F. In-Line Inspection of Base Film and Its Coating Proceedings of the TAPPI European PLACE Conference 2 Budapest, Hungary May 2009 Volume 2 1610 1649
- Van Rijsbergen C.J. Information Retrieval 2nd ed. Butterworths Oxford, United Kingdom 1979
- Jeong J.H. Kalowitsch M. State-of-the-art surface inspection technology with parsytec 5i SEAISI Q. 2007 36 10 15
Cited by
Song, K., & Yan, Y. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.09.002 · Cited by 1,026
Automated Visual Defect Detection for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Liu, L., Yang, C., & Sun, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2963555 · Cited by 559
Review of vision-based steel surface inspection systems
Neogi, N., Mohanta, D. K., & Dutta, P. K. (2014) · EURASIP Journal on Image and Video Processing · doi:10.1186/1687-5281-2014-50 · Cited by 322
Research Progress of Automated Visual Surface Defect Detection for Industrial Metal Planar Materials
Fang, X., Luo, Q., Zhou, B., Li, C., & Tian, L. (2020) · Sensors · doi:10.3390/s20185136 · Cited by 160
Research Progress of Visual Inspection Technology of Steel Products—A Review
Sun, X., Gu, J., Tang, S., & Li, J. (2018) · Applied Sciences · doi:10.3390/app8112195 · Cited by 109
An efficient method for defect detection during the manufacturing of web materials
Bulnes, F. G., Usamentiaga, R., Garcia, D. F., & Molleda, J. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-014-0876-9 · Cited by 65
Self-citationSong, K., & Yan, Y. (2013) · Mathematical Problems in Engineering · doi:10.1155/2013/429094 · Cited by 44
Influence of Uneven Lighting on Quantitative Indicators of Surface Defects
Konovalenko, І. V., Maruschak, P. O., Kozbur, H., Brezinová, J., Brezina, J., Nazarevich, B., & Shkira, Y. (2022) · Machines · doi:10.3390/machines10030194 · Cited by 44
A Non-Invasive Technique for Online Defect Detection on Steel Strip Surfaces
Bulnes, F. G., García, D. F., de la Calle, F. J., Usamentiaga, R., & Molleda, J. (2016) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-016-0370-8 · Cited by 42
Self-citationSong, K.-C., Hu, S.-P., Yan, Y.-H., & Li, J. (2014) · ISIJ International · doi:10.2355/isijinternational.54.2598 · Cited by 41
Vannocci, M., Ritacco, A., Castellano, A., Galli, F., Vannucci, M., Iannino, V., & Colla, V. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-20518-8_19 · Cited by 35
Steel Strip Surface Defect Identification using Multiresolution Binarized Image Features
Mentouri, Z., Moussaoui, A., Boudjehem, D., & Doghmane, H. (2020) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-020-01012-7 · Cited by 31
A Robust Completed Local Binary Pattern (RCLBP) for Surface Defect Detection
Gyimah, N. K., Girma, A., Mahmoud, M. N., Nateghi, S., Homaifar, A., & Opoku, D. (2021) · Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics · doi:10.1109/smc52423.2021.9659140 · Cited by 42
Recognition Of Surface Defects On Steel Sheet Using Transfer LearningPreprint
Fu, J., Zhu, X., & Li, Y. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1909.03258 · Cited by 35
Wen, X., Song, K., Niu, M., Dong, Z., & Yan, Y. (2016) · Optik · doi:10.1016/j.ijleo.2016.11.050 · Cited by 15
Defect detection on solar cells using mathematical morphology and fuzzy logic techniques
Junchao, W., & Chang, Z. (2023) · Journal of Optics · doi:10.1007/s12596-023-01162-5 · Cited by 8
Deep learning-based methods for detecting surface defects in steel plates
Patil, S., Miglani, A., Kankar, P. K., & Roy, D. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-90789-7.00001-4 · Cited by 8
A deep transfer learning-based algorithm for concrete surface defect detection
Jin, Z., & Wang, L. (2024) · Engineering Research Express · doi:10.1088/2631-8695/ad5e34 · Cited by 1
Classification of periodical defects in inspection systems based on computer vision
Bulnes, F. G. (2012) · AI Communications · doi:10.3233/aic-2012-0534 · Cited by 1
Self-citationNon-concentric Circular Texture Removal for Workpiece Defect Detection
Qin, S., Guo, D., Chen, H., & Xi, N. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-27538-9_49 · Cited by 1
Deep Learning-Based Quality Inspection System for Steel Sheet
Sambath, M., Reddy, C. S. B., Reddy, Y. K., Reddy, M. M. S., Kathiravan, M., & Ravi, S. (2022) · Algorithms for intelligent systems · doi:10.1007/978-981-19-6004-8_16 · Cited by 1
Methods for detecting surface defects on thin sheet materials for visual control automation (Review)
Novodranov, A. S. (2024) · Tehničeskaâ diagnostika i nerazrušaûŝij kontrol · doi:10.37434/tdnk2024.02.04 · Cited by 1
Automated visual control systems for surface defects in thin-sheet materials (Review)
Novodranov, A. S., & Shapovalov, E. V. (2024) · Tehničeskaâ diagnostika i nerazrušaûŝij kontrol · doi:10.37434/tdnk2024.01.05
Enhanced Defect Classification With CNN’s And path Aggregation Network
Khedidja, M., Abbas, F., & Hemam, M. (2024) · International Conference on Image and Signal Processing and their Applications (ISPA) · doi:10.1109/ispa59904.2024.10536835
Compare the effect of Rhodococcus erythropolis and Rhodococcus equi on crude oil by FT-IR technique
Riahi, M. A., & Rasti, A. (2023) · International Journal of Petrochemical Science & Engineering · doi:10.15406/ipcse.2023.06.00129
Novodranov, A. S. (2024) · The Paton Welding Journal · doi:10.37434/tpwj2024.08.05
Automotive Filter Surface Defect Detection System Based on Machine Vision
Zhao, P., Wei, X., Chen, M., Liu, G., Zhao, C., Guo, Y., Zhang, M., & An, R. (2025) · IEEE International Conference on Sensors, Electronics and Computer Engineering (ICSECE) · doi:10.1109/icsece65727.2025.11256986
Farrugia, N., Zouhri, W., Dantan, J.-Y., & Cristofari, F. (2026) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-026-02984-3
Metadata
- Authors
- Bulnes, F. G., Usamentiaga, R., García, D. F., & Molleda, J.
- Affiliations
- Universidad de Oviedo (ES)
- Department of Computer Science, University of Oviedo, Campus de Viesques, Gijón 33204, Spain
- Corresponding author
- Bulnes, Francisco G.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2012-08-06
- Volume
- 12
- Issue
- 8
- Pages
- 10788-10809
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC3472857
- OpenAlex
- W2066359763
- Semantic Scholar
- dc17ff307e111a96e57df39341fa4ae3c115af06
- Cited by
- 28
- References
- 26
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 5 · 2023: 2 · 2022: 3 · 2021: 1 · 2020: 3 · 2019: 3 · 2018: 1 · 2016: 2 · 2014: 3 · 2013: 2 · 2012: 1
- FWCI
- 4.72
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Consultation of the Doctoral Thesis Database (TESEO) (Ministerio de Educación, Cultura y Deporte) (submittedVersion, cc-by-nc-nd)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- ArcelorMittal
- Universidad de Oviedo
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Keywords
- vision sensors, surface defect detection, noisy images, full factorial design, industrial inspection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.