Vision-Based Sensor for Early Detection of Periodical Defects in Web Materials
Open accessThe DOI matches its Crossref record; 25 of the 26 references it cites were found in a registry or an index.
Abstract
During the production of web materials such as plastic, textiles or metal, where there are rolls involved in the production process, periodically generated defects may occur. If one of these rolls has some kind of flaw, it can generate a defect on the material surface each time it completes a full turn. This can cause the generation of a large number of surface defects, greatly degrading the product quality. For this reason, it is necessary to have a system that can detect these situations as soon as possible. This paper presents a vision-based sensor for the early detection of this kind of defects. It can be adapted to be used in the inspection of any web material, even when the input data are very noisy. To assess its performance, the sensor system was used to detect periodical defects in hot steel strips. A total of 36 strips produced in ArcelorMittal Avilés factory were used for this purpose, 18 to determine the optimal configuration of the proposed sensor using a full-factorial experimental design and the other 18 to verify the validity of the results. Next, they were compared with those provided by a commercial system used worldwide, showing a clear improvement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures











Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A survey on industrial vision systems, applications and tools
Malamas, E. N., Petrakis, E. G. M., Zervakis, M., Petit, L., & Legat, J.-D. (2003) · Image and Vision Computing · doi:10.1016/s0262-8856(02)00152-x · Cited by 797
Computer-Vision-Based Fabric Defect Detection: A Survey
Kumar, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.1930.896476 · Cited by 725
A Laser-Based Vision System for Weld Quality Inspection
Huang, W., & Kovacevic, R. (2011) · Sensors · doi:10.3390/s110100506 · Cited by 132
A flexible decision support system for steel hot rolling mill scheduling
Cowling, P. (2003) · Computers & Industrial Engineering · doi:10.1016/s0360-8352(03)00038-x · Cited by 98
Designing a defect classification system: A case study
Brzakovic, D. P., & Vujovic, N. S. (1996) · Pattern Recognition · doi:10.1016/0031-3203(95)00166-2 · Cited by 57
Zhang, Z., Gao, Z., Liu, Y.-Y., Jiang, F., Yang, Y., Ren, Y., Yang, H., Yang, K., & Zhang, X.-D. (2011) · Sensors · doi:10.3390/s120100334 · Cited by 40
Calibration of an Inspection System for Online Quality Control of Satin Glass
Adamo, F., Attivissimo, F., & Nisio, A. D. (2010) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2010.2040963 · Cited by 32
Monitoring the performance of the paper making process
Bissessur, Y., Martin, E. B., & Morris, A. J. (1999) · Control Engineering Practice · doi:10.1016/s0967-0661(99)00105-7 · Cited by 26
Vision-based inspection for periodic defects in steel wire rod production
Park, C., Choi, S., & Won, S. (2010) · Optical Engineering · doi:10.1117/1.3284779 · Cited by 25
Chang, C., & Su, C. (1995) · Computers & Industrial Engineering · doi:10.1016/0360-8352(94)00211-5 · Cited by 20
A Sensor System for Detection of Hull Surface Defects
Navarro, P., Iborra, A., Fernández, C., Sánchez, P., & Muro, J. S. (2010) · Sensors · doi:10.3390/s100807067 · Cited by 20
Duan, X., Duan, F., & Han, F. (2011) · International Conference on Control, Automation and Systems Engineering (CASE) · doi:10.1109/iccase.2011.5997625 · Cited by 19
Introduction to Building a Machine Vision Inspection
Telljohann, A. (2006) · doi:10.1002/9783527610136.ch2 · Cited by 15
I'Anson, S. J. (1995) · Cited by 9
Gyroscope Pivot Bearing Dimension and Surface Defect Detection
Ge, W., Zhao, H., & Li, X. (2011) · Sensors · doi:10.3390/s110303227 · Cited by 7
Estimating periodic length and defect coordinates from a series of integer values
Zhao, S., Huang, H., Wang, F., Li, Y., & Gangcheng, W. (2008) · Measurement · doi:10.1016/j.measurement.2008.09.005 · Cited by 7
Determination of the Autocorrelation Function of Woven Fabrics Using Laser Speckle
Toba, E. (1980) · Textile Research Journal · doi:10.1177/004051758005000407 · Cited by 7
Detection of periodical patterns in the defects identified by computer vision systems
Bulnes, F. G., Usamentiaga, R., Garcia, D. F., & Molleda, J. (2011) · International Conference on Intelligent Systems Design and Applications (ISDA) · doi:10.1109/isda.2011.6121672 · Cited by 6
Self-citationDréan, J.-Y., Harzallah, O. A., & Renner, M. (2010) · Textile Research Journal · doi:10.1177/0040517510371867 · Cited by 5
Vision-based technique for periodical defect detection in hot steel strips
Bulnes, F. G., Usamentiaga, R., Garcia, D. F., Molleda, J., & Rendueles, J. L. (2011) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2011.6074384 · Cited by 4
Self-citationAn investigation into the weft insertion periodic errors in fabric using an image analysis method
Kianiha, A., Sheikhzadeh, M., Semnani, D., & Dabirian, F. (2010) · Journal of the Textile Institute · doi:10.1080/00405000802517095 · Cited by 3
Real-time inspection of preweathered zinc based on computer vision
Caron, J., Duvieubourg, L., Orteu, J., & Revolte, P. (1996) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.232249 · Cited by 2
Broken roll detection, application, algorithm and its basic principles of sensing
Traxler, G., Klarner, J., & Huelble-Koenigsberger, G. (2005) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.585847 · Cited by 2
A Technique for Clustering Individual Defects from Images of Steel Strips with Periodical Defects
Bulnes, F. G., Garcia, D. F., & Molleda, J. (2011) · Cited by 1
Self-citationSURFACE QUALITY IMPROVEMENT BY SDD IN POSCO
S, L. K., & J, K. K. (2003) · Cited by 1
Research works printed but not linked: 6
- Bernie J.P. Trepanier R. A New Technique to Characterize Periodic and Pseudo-Periodic Marks Within a Sheet of Paper Proceedings of the 2007 TAPPI Papermakers and PIMA International Leadership Conference Jacksonville, FL, USA March 2007
- Bernie J. Trepanier R. A new technique for measuring periodic patterns within a paper sheet Pulp Pap. Can. 2009 110 39 42
- Chaplin D. Image analysis: A powerful tool to pinpoint defects and gauge print quality Pap. Age 1998 114 30 31
- Oerley H. Bauereiss U. Strobl F. In-Line Inspection of Base Film and Its Coating Proceedings of the TAPPI European PLACE Conference 2 Budapest, Hungary May 2009 Volume 2 1610 1649
- Van Rijsbergen C.J. Information Retrieval 2nd ed. Butterworths Oxford, United Kingdom 1979
- Jeong J.H. Kalowitsch M. State-of-the-art surface inspection technology with parsytec 5i SEAISI Q. 2007 36 10 15
Cited by
Song, K., & Yan, Y. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.09.002 · Cited by 1,026
Automated Visual Defect Detection for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Liu, L., Yang, C., & Sun, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2963555 · Cited by 559
Review of vision-based steel surface inspection systems
Neogi, N., Mohanta, D. K., & Dutta, P. K. (2014) · EURASIP Journal on Image and Video Processing · doi:10.1186/1687-5281-2014-50 · Cited by 322
Research Progress of Automated Visual Surface Defect Detection for Industrial Metal Planar Materials
Fang, X., Luo, Q., Zhou, B., Li, C., & Tian, L. (2020) · Sensors · doi:10.3390/s20185136 · Cited by 160
Research Progress of Visual Inspection Technology of Steel Products—A Review
Sun, X., Gu, J., Tang, S., & Li, J. (2018) · Applied Sciences · doi:10.3390/app8112195 · Cited by 109
Metadata
- Authors
- Bulnes, F. G., Usamentiaga, R., García, D. F., & Molleda, J.
- Affiliations
- Universidad de Oviedo (ES)
- Department of Computer Science, University of Oviedo, Campus de Viesques, Gijón 33204, Spain
- Corresponding author
- Bulnes, Francisco G.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2012-08-06
- Volume
- 12
- Issue
- 8
- Pages
- 10788-10809
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC3472857
- OpenAlex
- W2066359763
- Semantic Scholar
- dc17ff307e111a96e57df39341fa4ae3c115af06
- Cited by
- 28
- References
- 26
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 5 · 2023: 2 · 2022: 3 · 2021: 1 · 2020: 3 · 2019: 3 · 2018: 1 · 2016: 2 · 2014: 3 · 2013: 2 · 2012: 1
- FWCI
- 4.72
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Consultation of the Doctoral Thesis Database (TESEO) (Ministerio de Educación, Cultura y Deporte) (submittedVersion, cc-by-nc-nd)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- ArcelorMittal
- Universidad de Oviedo
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Keywords
- vision sensors, surface defect detection, noisy images, full factorial design, industrial inspection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.