The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
An Experimental Study on the Effect of Temperature on Piezoelectric Sensors for Impedance-Based Structural Health Monitoring
Open accessAbstract
The electromechanical impedance (EMI) technique is considered to be one of the most promising methods for developing structural health monitoring (SHM) systems. This technique is simple to implement and uses small and inexpensive piezoelectric sensors. However, practical problems have hindered its application to real-world structures, and temperature effects have been cited in the literature as critical problems. In this paper, we present an experimental study of the effect of temperature on the electrical impedance of the piezoelectric sensors used in the EMI technique. We used 5H PZT (lead zirconate titanate) ceramic sensors, which are commonly used in the EMI technique. The experimental results showed that the temperature effects were strongly frequency-dependent, which may motivate future research in the SHM field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Impedance-Based Health Monitoring of Civil Structural Components
Park, G., Cudney, H. H., & Inman, D. J. (2000) · Journal of Infrastructure Systems · doi:10.1061/(asce)1076-0342(2000)6:4(153 · Cited by 460
Ni, Y. Q., Hua, X. G., Fan, K. Q., & Ko, J. M. (2005) · Engineering Structures · doi:10.1016/j.engstruct.2005.02.020 · Cited by 305
Damage classification in reinforced concrete beam by acoustic emission signal analysis
Shahidan, S., Pulin, R., Muhamad Bunnori, N., & Holford, K. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.03.095 · Cited by 298
Impedance-Based Structural Health Monitoring for Temperature Varying Applications.
PARK, G., KABEYA, K., CUDNEY, H. H., & INMAN, D. J. (1999) · JSME International Journal Series A · doi:10.1299/jsmea.42.249 · Cited by 284
Improving Accessibility of the Impedance-Based Structural Health Monitoring Method
Peairs, D. M., Park, G., & Inman, D. J. (2004) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x04039914 · Cited by 278
Feasibility of using impedance‐based damage assessment for pipeline structures
Park, G., Cudney, H. H., & Inman, D. J. (2001) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.72 · Cited by 272
Annamdas, V. G., & Radhika, M. A. (2013) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x13481254 · Cited by 176
Victor Giurgiutiu, B., & Rogers, C. A. (1998) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.316923 · Cited by 158
A New Impedance Measurement System for PZT-Based Structural Health Monitoring
Baptista, F. G., & Filho, J. V. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2009.2018693 · Cited by 148
Self-citationKoo, K. Y., Park, S., Lee, J.-J., & Yun, C. (2008) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x08088664 · Cited by 140
New Trends in Structural Health Monitoring
(2013) · CISM International Centre for Mechanical Sciences · doi:10.1007/978-3-7091-1390-5 · Cited by 130
Impedance based damage detection under varying temperature and loading conditions
Lim, H. J., Kim, M. K., Hoon Sohn, A., & Park, C. Y. (2011) · NDT & E International · doi:10.1016/j.ndteint.2011.08.003 · Cited by 116
Lamb wave–based quantitative crack detection using a focusing array algorithm
Yu, L., & Leckey, C. A. C. (2012) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x12469452 · Cited by 71
Optimal Frequency Range Selection for PZT Transducers in Impedance-Based SHM Systems
Baptista, F. G., & Filho, J. V. (2010) · IEEE Sensors Journal · doi:10.1109/jsen.2010.2044037 · Cited by 57
Self-citationCortez, N. E., Filho, J. V., & Baptista, F. G. (2012) · Structural Health Monitoring · doi:10.1177/1475921712461163 · Cited by 36
Self-citationImpedance-Based Temperature Sensing With Piezoceramic Devices
Ilg, J., Rupitsch, S. J., & Lerch, R. (2013) · IEEE Sensors Journal · doi:10.1109/jsen.2013.2256121 · Cited by 35
Bastani, A., Amindavar, H. R., Shamshirsaz, M., & Sepehry, N. (2011) · Structural Health Monitoring · doi:10.1177/1475921711427486 · Cited by 34
Svečko, R., Kusić, D., Kek, T., Sarjaš, A., Hančič, A., & Grum, J. (2013) · Sensors · doi:10.3390/s130506365 · Cited by 24
Hong, D.-S., Nguyen, K.-D., Lee, I.-C., & Kim, J. (2012) · International Journal of Distributed Sensor Networks · doi:10.1155/2012/167120 · Cited by 19
Cited by
Structural Health Monitoring Framework Based on Internet of Things: A Survey
Arcadius Tokognon, C., Gao, B., Tian, G. Y., & Yan, Y. (2017) · IEEE Internet of Things Journal · doi:10.1109/jiot.2017.2664072 · Cited by 469
Integrated structural health monitoring in bridge engineering
He, Z., Li, W., Salehi, H., Zhang, H., Zhou, H., & Jiao, P. (2022) · Automation in Construction · doi:10.1016/j.autcon.2022.104168 · Cited by 372
Keshmiry, A., Hassani, S., Mousavi, M., & Dackermann, U. (2023) · Buildings · doi:10.3390/buildings13040918 · Cited by 117
Advances in the Structural Health Monitoring of Bridges Using Piezoelectric Transducers
Chen, Y., & Xue, X. (2018) · Sensors · doi:10.3390/s18124312 · Cited by 87
Kostić, B., & Gül, M. (2017) · Journal of Bridge Engineering · doi:10.1061/(asce)be.1943-5592.0001085 · Cited by 74
Metadata
- Authors
- Baptista, F., Budoya, D., Almeida, V., & Ulson, J.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2014-01-10
- Volume
- 14
- Issue
- 1
- Pages
- 1208-1227
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W2066553568
- Cited by
- 286
- References
- 19
- FWCI
- 20.68
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.