An Adaptive Multi-Sensor Data Fusion Method Based on Deep Convolutional Neural Networks for Fault Diagnosis of Planetary Gearbox
Open accessThe DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Abstract
A fault diagnosis approach based on multi-sensor data fusion is a promising tool to deal with complicated damage detection problems of mechanical systems. Nevertheless, this approach suffers from two challenges, which are (1) the feature extraction from various types of sensory data and (2) the selection of a suitable fusion level. It is usually difficult to choose an optimal feature or fusion level for a specific fault diagnosis task, and extensive domain expertise and human labor are also highly required during these selections. To address these two challenges, we propose an adaptive multi-sensor data fusion method based on deep convolutional neural networks (DCNN) for fault diagnosis. The proposed method can learn features from raw data and optimize a combination of different fusion levels adaptively to satisfy the requirements of any fault diagnosis task. The proposed method is tested through a planetary gearbox test rig. Handcraft features, manual-selected fusion levels, single sensory data, and two traditional intelligent models, back-propagation neural networks (BPNN) and a support vector machine (SVM), are used as comparisons in the experiment. The results demonstrate that the proposed method is able to detect the conditions of the planetary gearbox effectively with the best diagnosis accuracy among all comparative methods in the experiment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures









Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Very Deep Convolutional Networks for Large-Scale Image Recognition
Simonyan, K., & Zisserman, A. (2014) · arXiv · doi:10.48550/arxiv.1409.1556 · Cited by 114,148 · cited 1×
“Sensors 2017 , 17 , 414 where C cn is the cn -th output of the convolutional layer, and the output number is CN , which is also equal to the filter number; ∗ is an operator of convolution; X cc represents the input data of cc-th channel of previous layer l − 1, and the channel number is CC ; W lcn…”
BackgroundImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155 · cited 1×
“DCNN contains three kinds of layers [25], which are the convolutional layer, pooling layer, and fully-connected layer.”
BackgroundLeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Rich Feature Hierarchies for Accurate Object Detection and Semantic Segmentation
Girshick, R., Donahue, J., Darrell, T., & Malik, J. (2014) · 2014 IEEE Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2014.81 · Cited by 32,684
Rethinking the Inception Architecture for Computer Vision
Szegedy, C., Vanhoucke, V., Ioffe, S., Shlens, J., & Wojna, Z. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.308 · Cited by 32,138
Human-level control through deep reinforcement learning
Mnih, V., Kavukcuoglu, K., Silver, D., Rusu, A. A., Veness, J., Bellemare, M. G., Graves, A., Riedmiller, M., Fidjeland, A. K., Ostrovski, G., et al. (2015) · Nature · doi:10.1038/nature14236 · Cited by 30,357
Deep learning in neural networks: an overview
Schmidhuber, J. (2015) · Neural Networks · doi:10.1016/j.neunet.2014.09.003 · Cited by 18,570
Representation Learning: A Review and New Perspectives
Bengio, Y., Courville, A., & Vincent, P. (2013) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2013.50 · Cited by 13,001
Learning Deep Architectures for AI
Bengio, Y. (2009) · Foundations and Trends® in Machine Learning · doi:10.1561/2200000006 · Cited by 9,239
3D Convolutional Neural Networks for Human Action Recognition
Ji, S., Xu, W., Yang, M., & Yu, K. (2013) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2012.59 · Cited by 6,235
Research works printed but not linked: 1
- Fedala, S., Rémond, D., Zegadi, R., and Felkaoui, A. (2016). Condition Monitoring of Machinery in Non-Stationary Operations, Springer.
Cited by
Items 101–200 of 380
Li, H., Zhu, F., Zheng, X., Liu, M., & Chen, G. (2022) · IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing · doi:10.1109/jstars.2022.3181155 · Cited by 59
“Some studies have integrated multispectral and SAR features to improve VHR land cover classification and semantic segmentation [16]–[19], but there are few works of fusing multispectral, SAR, and VHR data for CD tasks.”
BackgroundZhao, Y. J., Noori, M. N., Altabey, W. A., Ghiasi, R., & Wu, Z. (2018) · Applied Sciences · doi:10.3390/app8122564 · Cited by 50
Fault Diagnosis of Motor Bearings Based on a One-Dimensional Fusion Neural Network
Jian, X., Li, W., Guo, X., & Wang, R. (2019) · Sensors · doi:10.3390/s19010122 · Cited by 50
“, RMSprop optimization and BN are used to suppress over-fitting of the network.”
MethodSharma, S., & Tiwari, S. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.108909 · Cited by 53
Joint Learning of Temporal Models to Handle Imbalanced Data for Human Activity Recognition
Hamad, R. A., Yang, L., Woo, W. L., & Wei, B. W. (2020) · Applied Sciences · doi:10.3390/app10155293 · Cited by 61
“Specifically, activities, such as sleeping, eating, and showering in smart homes, are key events to enable the tracking and assess of the functional health status of elderly people [8].”
BackgroundModeling and Fault Detection of Brushless Direct Current Motor by Deep Learning Sensor Data Fusion
Suawa, P. F., Meisel, T., Jongmanns, M., Hübner, M., & Reichenbach, M. (2022) · Sensors · doi:10.3390/s22093516 · Cited by 52
Vibration based fault diagnostics in a wind turbine planetary gearbox using machine learning
Amin, A., Bibo, A., Panyam, M., & Tallapragada, P. (2022) · Wind Engineering · doi:10.1177/0309524x221123968 · Cited by 52
“A convolutional neural network (CNN) is often used in image recognition for damage classification (Guo et al., 2018; Jing et al., 2017).”
MethodFault diagnosis of rotor based on Local-Global Balanced Orthogonal Discriminant Projection
Shi, M., Zhao, R., Wu, Y., & He, T. (2020) · Measurement · doi:10.1016/j.measurement.2020.108320 · Cited by 47
Gültekın, Ö., Çinar, E. M., Özkan, K., & Yazıcı, A. T. (2022) · Neural Computing and Applications · doi:10.1007/s00521-021-06668-2 · Cited by 48
“For example, Jing et al. [14] constructed an adaptive multi-sensor data fusion method based on deep CNN (DCNN) for intelligent planetary gearbox fault detection, which takes raw signal data as input.”
MethodEffective Crack Detection in Railway Axles Using Vibration Signals and WPT Energy
García, M. J. G., Corral, E., Castejón, C., & García-Prada, J. C. (2018) · Sensors · doi:10.3390/s18051603 · Cited by 44
“ANNs have been widely used to automate fault diagnosis techniques, including applications for gearboxes [16], shafts [17], and bearings [18–20].”
MethodZhang, X., Huang, T., Wu, B., Hu, Y., Huang, S., Zhou, Q., & Zhang, X. (2021) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-021-0629-3 · Cited by 45
A Novel Real-Time Fault Diagnosis Method for Planetary Gearbox Using Transferable Hidden Layer
Miao, X., Li, S., Zhu, Y., & An, Z. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2020.2965988 · Cited by 44
“Deep learning technology has been widely studied and applied in the field of fault diagnosis, including deep belief nets (DBN) [6], [7], autoencoder (AE) [8]–[11], convolutional neural networks (CNN) [12]–[14], sparse filtering (SF) [15], etc.”
BackgroundKnowledge transfer in fault diagnosis of rotary machines
Liu, G., Shen, W., Gao, L., & Kusiak, A. (2022) · IET Collaborative Intelligent Manufacturing · doi:10.1049/cim2.12047 · Cited by 44
A New Snapshot Ensemble Convolutional Neural Network for Fault Diagnosis
Wen, L., Gao, L., & Li, X. (2019) · IEEE Access · doi:10.1109/access.2019.2903295 · Cited by 46
“[41] applied an adaptive learning rate based CNN method for gearbox fault diagnosis, which set a large learning rate at beginning and decreased the learning rate adaptively.”
MethodSensor Data Fusion for a Mobile Robot Using Neural Networks
Barreto-Cubero, A. J., Gómez-Espinosa, A., Cabello, J. A. E., Cuan‐Urquizo, E., & Cruz-Ramírez, S. R. (2021) · Sensors · doi:10.3390/s22010305 · Cited by 53
“Given the varied nature of the working principles for the sensors that function as the input data source, different processing methods were required to start the data fusion process.”
MethodMa, Y., Mustapha, F. B., Ishak, M. R., Rahim, S. B. A., & Mustapha, M. (2023) · Nondestructive Testing And Evaluation · doi:10.1080/10589759.2023.2206655 · Cited by 45
Zhou, F., Hu, P., Yang, S., & Wen, C. (2018) · Sensors · doi:10.3390/s18103521 · Cited by 45
Mishra, K. M., & Huhtala, K. J. (2019) · Applied Sciences · doi:10.3390/app9152990 · Cited by 42
Tang, X., Gu, X., Rao, L., & Lu, J. (2021) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2021.107101 · Cited by 43
A new intelligent bearing fault diagnosis model based on triplet network and SVM
Yang, K., Zhao, L., & Wang, C. (2022) · Scientific Reports · doi:10.1038/s41598-022-08956-w · Cited by 46
Yan, X., Zhang, C.-A., & Liu, Y. (2020) · Measurement · doi:10.1016/j.measurement.2020.108778 · Cited by 40
Aircraft Gearbox Fault Diagnosis System: An Approach based on Deep Learning Techniques
Mallikarjuna, P. B., Sreenatha, M., Manjunath, S., & Kundur, N. C. (2020) · Journal of Intelligent Systems · doi:10.1515/jisys-2019-0237 · Cited by 39
“An adaptive multi-sensor data fusion method based on Deep Convolutional Neural Networks (DCNN) was proposed for fault diagnosis in gearbox systems [13].”
MethodApplication Combining VMD and ResNet101 in Intelligent Diagnosis of Motor Faults
Lin, S.-L. (2021) · Sensors · doi:10.3390/s21186065 · Cited by 38
Wind Turbine Gearbox Fault Diagnosis Based on Multi-Sensor Signals Fusion
Zhao, Y., Song, Z., Li, D., Qian, R., & Lin, S. (2024) · Protection and Control of Modern Power Systems · doi:10.23919/pcmp.2023.000241 · Cited by 37
Luo, H., Huang, M., & Zhou, Z. (2018) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2018.05.007 · Cited by 40
Saucedo-Dorantes, J. J., Delgado-Prieto, M., Romero-Troncoso, R. D. J., & Osornio-Rios, R. A. (2019) · Applied Soft Computing · doi:10.1016/j.asoc.2019.105497 · Cited by 38
Tongguang, Y., Yu, X., Li, G., Dou, J., & Baojia, D. (2019) · Measurement Science and Technology · doi:10.1088/1361-6501/ab5342 · Cited by 36
“To increase the nonlinear characteristics of the model [39], the most widely used ReLU (max (0, x)) function is adopted as the activation function.”
MethodSong, D., Ma, T., Li, Y., & Xu, F. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3173924 · Cited by 36
Liu, W., Qin, C., Gao, K., Li, H., Qin, Z., Cao, Y., & Si, W. (2019) · IEEE Access · doi:10.1109/access.2019.2943927 · Cited by 35
“Highrisk assessment of cerebral infarction was performed on structured dataset P1 using three machine learning methods, including naive Bayesian model [5], K nearest neighbor model [7], and decision tree model (Decision Tree) [9].”
MethodGati, N. J., Yang, L. T., Feng, J., Nie, X., Ren, B., & Tarus, S. K. (2021) · Information Fusion · doi:10.1016/j.inffus.2021.04.017 · Cited by 37
Li, F., Chen, J., Liu, Z., Lv, H., Wang, J., Yuan, J., & Xiao, W. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108759 · Cited by 34
A deep learning-based approach for crack damage detection using strain field
Huang, Z., Chang, D., Yang, X., & Zuo, H. (2023) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2023.109703 · Cited by 39
Wu, Y., Jin, W., Ren, J., & Sun, Z. (2019) · Applied Intelligence · doi:10.1007/s10489-019-01483-8 · Cited by 34
“The literature [1] used the output of multiple neural networks for data fusion, and [13] chose to join fragments from every channel as a way of signal fusion.”
BackgroundLi, J., Li, X., He, D., & Qu, Y. (2019) · Proceedings of the Institution of Mechanical Engineers Part O Journal of Risk and Reliability · doi:10.1177/1748006x19867776 · Cited by 34
“Jing et al. 25 proposed an adaptive gearbox faults diagnosis method based on deep convolutional neural network (DCNN), and there is no feature extraction process in the article, and the raw data collected from the experiment were directly applied as the inputs of the DCNN. Wang et al. 26 proposed…”
MethodYe, Q., Liu, S., & Liu, C. (2020) · Sensors · doi:10.3390/s20154300 · Cited by 34
Zhou, S., Chen, B., Zhang, Y., Liu, H., Xiao, Y., & Pan, X. (2020) · International Journal of Interactive Multimedia and Artificial Intelligence · doi:10.9781/ijimai.2020.11.006 · Cited by 32
“In recent years, with the rapid development of AI, data fusion has been widely applied in intelligent medical [15], intelligent industry [16], intelligent transportation [17] and so on.”
BackgroundAndrade, A., Lopes, K. R., de Lima, B. F. A., & Maitelli, A. L. (2021) · Sensors · doi:10.3390/s21030853 · Cited by 35
Li, B., Zhang, X., & Wu, T. (2018) · ISA Transactions · doi:10.1016/j.isatra.2018.01.034 · Cited by 31
Machine learning algorithms for rotating machinery bearing fault diagnostics
Adamsab, K. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.12.050 · Cited by 32
Fault Detection of Elevator Systems Using Multilayer Perceptron Neural Network
Mishra, K. M., & Huhtala, K. J. (2019) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2019.8869230 · Cited by 35
A Real-Time Fault Early Warning Method for a High-Speed EMU Axle Box Bearing
Liu, L., Song, D., Geng, Z., & Zheng, Z. (2020) · Sensors · doi:10.3390/s20030823 · Cited by 32
Zhang, C., Feng, J., Hu, C., Liu, Z., Cheng, L., & Zhou, Y. (2020) · IEEE Access · doi:10.1109/access.2020.2981289 · Cited by 31
A feature fusion-based prognostics approach for rolling element bearings
Akpudo, U. E., & Hur, J.-W. (2020) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-020-2213-x · Cited by 30
“From these reported works and a host of many others, these feature fusion algorithms are primarily designed to accept several inputs (from several sensors, from several extracted features or several segmentations) and convert them to a new, integrated feature while preserving the original information [11]; however, ea…”
BackgroundMethodWood Recognition and Quality Imaging Inspection Systems
Kryl, M., Danys, L., Jaroš, R., Martínek, R., Kodytek, P., & Bilík, P. (2020) · Journal of Sensors · doi:10.1155/2020/3217126 · Cited by 38
“Even though none of the researched wood-related articles covered such solution, the methodology was successfully applied in other fields like mobile traffic classification [104] or gearbox fault diagnosis [105].”
MethodImproved DCNN Based on Multi-Source Signals for Motor Compound Fault Diagnosis
Gong, X., Zhi, Z., Feng, K., Du, W., & Wang, T. (2022) · Machines · doi:10.3390/machines10040277 · Cited by 31
Self-citationMonteiro, T. G., Li, G., Skourup, C., & Zhang, H. (2020) · Sensors · doi:10.3390/s20092588 · Cited by 36
“A wide range of architectures can be identified on the literature, from the most classical ones, such as JDL fusion architecture [36] to most recent ones, such as multiple functional neural fuzzy networks and deep convolutional neural network (CNN) [37].”
BackgroundSharma, V. (2021) · Journal of The Institution of Engineers (India) Series C · doi:10.1007/s40032-021-00666-y · Cited by 29
Yu, J., & Liu, X. (2021) · International Journal of Production Research · doi:10.1080/00207543.2021.1968061 · Cited by 36
“However, conventional CNN and CAE lack effectiveness in learning one-dimensional process data when implementing process monitoring (Mao, Shen, and Yang 2016; Jing et al. 2017).”
MethodWind Turbine Gearbox Fault Diagnosis Using Cyclostationary Analysis and Interpretable CNN
Amin, A., Bibo, A., Panyam, M., & Tallapragada, P. (2023) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-023-00937-1 · Cited by 28
“A convolutional neural network (CNN) is often used in image recognition for damage classification [31, 32].”
Modeling of BN Lifetime Prediction of a System Based on Integrated Multi-Level Information
Wang, J., Wang, X., & Wang, L. (2017) · Sensors · doi:10.3390/s17092123 · Cited by 27
Jiang, G., Zhao, J., Jia, C., He, Q., Xie, P., & Meng, Z. (2019) · Prognostics and System Health Management Conference · doi:10.1109/phm-qingdao46334.2019.8942903 · Cited by 28
“As a classical model of deep learning, deep belief network (DBN) has drawn widespread attention for its superior feature extraction ability and unique training methods [24], and recently it has found wide applications in the fault diagnosis field.”
BackgroundMachine and Deep Learning Algorithms for Wearable Health Monitoring
Fei, C., Liu, R., Li, Z., Wang, T., & Baig, F. N. (2021) · Health information science · doi:10.1007/978-3-030-68723-6_6 · Cited by 35
Self-citationAn Automated Sensor Fusion Approach for the RUL Prediction of Electromagnetic Pumps
Akpudo, U. E., & Hur, J.-W. (2021) · IEEE Access · doi:10.1109/access.2021.3063676 · Cited by 30
“[7]–[9]; however, not all measurements are prognosible measurements.”
BackgroundCooper, C., Zhang, J., Ragai, I., & Gao, R. X. (2024) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2024.04.010 · Cited by 30
Wang, T., Xu, X. G., Hong-xia, P., Chang, X., Yuan, T., Zhang, X., & Xu, H. (2022) · Applied Sciences · doi:10.3390/app12157640 · Cited by 26
Self-citationZhang, Y., Feng, Z., Shi, S., Dong, Z., Zhao, L., Jing, L., & Tan, J. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e11623 · Cited by 26
“Jing et al [17] applied CNN model to realize multi-sensor data fusion for fault diagnosis of planetary gearbox.”
BackgroundMethodSelf-citationAdvancements in EEG Emotion Recognition: Leveraging Multi-Modal Database Integration
Roshdy, A., Karar, A. S., Kork, S. A., Beyrouthy, T., & Naït-Ali, A. (2024) · Applied Sciences · doi:10.3390/app14062487 · Cited by 31
Chen, J., Wang, C., Wang, B., & Zhou, Z. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.10.021 · Cited by 27
Hybrid Data Fusion DBN for Intelligent Fault Diagnosis of Vehicle Reducers
Zhang, T., Li, Z., Deng, Z., & Hu, B. (2019) · Sensors · doi:10.3390/s19112504 · Cited by 26
“Multisensor data fusion remains a challenging issue [50], although some good research progress has been made.”
BackgroundLv, Y., Hao, J., Tang, M., & Wu, J. (2025) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2025.111767 · Cited by 29
Fault diagnosis of an induction motor using data fusion based on neural networks
Jorkesh, S., & Poshtan, J. (2021) · IET Science Measurement & Technology · doi:10.1049/smt2.12068 · Cited by 28
“In this paper, data preprocessing is proposed to improve the accuracy of the evaluation of the sensor’s information compared to [7, 14], which has led to the improvement of the performance of the fault diagnosis system in monitoring the condition of the induction motor.”
MethodJiang, L., Li, S., Li, X., Jiale, L., & Dalian, Y. (2021) · Measurement Science and Technology · doi:10.1088/1361-6501/ac471a · Cited by 27
“As a result, a higher learning rate can be obtained, and the manual adjustment processes of the parameters can be reduced [26].”
BackgroundXing, Z., Liu, Y., Wang, Q., & Li, J. (2022) · AIP Advances · doi:10.1063/5.0095530 · Cited by 27
A Flexible Sensor and MIMU-Based Multisensor Wearable System for Human Motion Analysis
Gu, Y. X., Han, Y., Liu, X., Zhang, N., Zhang, X., Pan, M., Wang, S., Dong, W., & Liu, T. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3233653 · Cited by 25
“The traditional data fusion methods toward multisensor systems [33], [34], [35], [36] do not fully take disturbance into account, which means their model could have low accuracy under disturbance situation.”
BackgroundMotor On-Line Fault Diagnosis Method Research Based on 1D-CNN and Multi-Sensor Information
Gu, Y.-F., Zhang, Y., Yang, M., & Li, C. (2023) · Applied Sciences · doi:10.3390/app13074192 · Cited by 26
Ouyang, J., Lin, Z., Hu, L., & Fang, X. (2025) · Scientific Reports · doi:10.1038/s41598-025-13188-9 · Cited by 24
“To address the construction of spatial features, some studies have attempted to introduce CNN to capture local spatial patterns 39–41 .”
Intelligent Solenoid Pump Fault Detection based on MFCC Features, LLE and SVM
Akpudo, U. E., & Hur, J.-W. (2020) · International Conference on Artificial Intelligence in Information and Communication (ICAIIC) · doi:10.1109/icaiic48513.2020.9065282 · Cited by 24
“These dimensionality reduction/feature fusion techniques are designed to combine many features into a single (or fewer) dimensions while preserving the original information [10].”
BackgroundDiagnosis of faulty gears by modified AlexNet and improved grasshopper optimization algorithm (IGOA)
Ghulanavar, R., Dama, K. K., & Jagadeesh, A. (2020) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-020-0909-6 · Cited by 24
“A multi-sensor data fusion’s fault diagnosis approach [15] was an auspicious tool for the detection of complicated damage mechanical systems problems.”
MethodKasture, K. R., Sayankar, B. B., & Matte, P. N. (2021) · IEEE Global Conference for Advancement in Technology (GCAT) · doi:10.1109/gcat52182.2021.9587760 · Cited by 28
An intelligent bearing fault diagnosis system: A review
Saufi, M. S. R. M., Ahmad, Z. A., Leong, M. S., & Lim, M. H. (2019) · MATEC Web of Conferences · doi:10.1051/matecconf/201925506005 · Cited by 25
Su, J., Xuan, J., Duan, J., Lin, J., Tao, H., Xia, Q., Jing, R., Xiong, S., & Shi, T. (2020) · Journal of Vibration and Control · doi:10.1177/1077546320961918 · Cited by 24
“Figure 10( 2019), it has been proved that the classi fi cation capability of the multistructure-based network is superior to the data splicing – based fusion method (Jing et al., 2017; Liu et al., 2018a, 2018b).”
MethodGao, T., Yang, J., Zhang, B., Li, Y., & Zhang, H. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/ad1673 · Cited by 23
“Jing et al [21] directly fused data from four sensors and constructed CNN for implementing fault diagnosis in planetary gear-boxes.”
Convolutional Neural Networks for Fault Diagnosis Using Rotating Speed Normalized Vibration
Wei, D., Wang, K., Heyns, S., & Zuo, M. J. (2019) · Applied condition monitoring · doi:10.1007/978-3-030-11220-2_8 · Cited by 25
Fractal dimension based damage identification incorporating multi-task sparse Bayesian learning
Huang, Y., Li, H., Wu, S., & Yang, Y. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aac248 · Cited by 22
Hu, P., Song, Y., Zhou, H., Xie, J., & Zhang, C. (2022) · Computer-Aided Design · doi:10.1016/j.cad.2022.103273 · Cited by 22
Kannan, V., Dao, D. V., & Li, H. (2022) · Structural Health Monitoring · doi:10.1177/14759217221112451 · Cited by 25
Maillet, W., Ouhami, M., & Hafiane, A. (2023) · IEEE Access · doi:10.1109/access.2023.3237082 · Cited by 28
“cations, namely in the medical field [28], in mechanics [29] and in agriculture specifically data fusion for yield prediction”
BackgroundBai, T., Yang, J., Yao, D., & Wang, Y. (2021) · Shock and Vibration · doi:10.1155/2021/6622041 · Cited by 22
“In addition, it also has the advantages of strong adaptability, easy implementation, and less training parameters [36].”
BackgroundYu, K., Han, H., Fu, Q., Ma, H., & Zeng, J. (2020) · Measurement Science and Technology · doi:10.1088/1361-6501/ab9841 · Cited by 21
“Jing et al [20] proposed a multi-sensor data fusion method, based on a convolutional neural network (CNN) for machinery fault diagnosis, in which the discriminate features were directly leaned from the multi-source raw data.”
MethodBai, T., Yang, J., Duan, L., & Wang, Y. (2020) · Shock and Vibration · doi:10.1155/2020/8898944 · Cited by 21
“CNN is selected for fault identification in this paper because it has been successfully applied in the field of mechanical equipment fault diagnosis and has shown good performance [30, 31].”
MethodInfluentialDeep multi-sensorial data analysis for production monitoring in hard metal industry
Kotsiopoulos, T., Leontaris, L., Dimitriou, N., Ioannidis, D., Oliveira, F. J., Sacramento, J., Amanatiadis, S. A., Karagiannis, G. T., Votis, K., Tzovaras, D. K., et al. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-06173-1 · Cited by 22
Li, H., Huang, J., Gao, M., Yang, L., & Bao, Y. (2022) · Applied Sciences · doi:10.3390/app122211410 · Cited by 22
Zhu, J., Gong, Z., Sun, Y., & Dou, Z. (2020) · Quality and Reliability Engineering International · doi:10.1002/qre.2760 · Cited by 20
Planetary gear train microcrack detection using vibration data and convolutional neural networks
Emmanuel, S., Yihun, Y., Ahmadabadi, Z. N., & Boldsaikhan, E. (2021) · Neural Computing and Applications · doi:10.1007/s00521-021-06314-x · Cited by 20
“Articles [24–30] shed light on using deep convolutional neural networks (1D and 2D) for gearbox and other structural damage detection by employing methods, such as feature learning, transfer learning, wavelet transform, and adaptive separation, to identify faults prior to feeding the data to the…”
BackgroundCarNet: A Dual Correlation Method for Health Perception of Rotating Machinery
Zhang, W., Yang, D., Wang, H., Huang, X., & Gidlund, M. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2912934 · Cited by 20
Han, D., Tian, J., Peng, X. B., & Shi, P. (2021) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-021-0707-9 · Cited by 19
High-Dimensional Data Global Sensitivity Analysis Based on Deep Soft Sensor Model
Yi, L., Ding, J., Liu, C., & Chai, T. (2022) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2022.3169637 · Cited by 19
“For example, Jing et al. took the fused signal data collected from multisensor as input to obtain a higher precision fault diagnosis of the planetary gearbox with a deep CNN [29].”
MethodA Multi-Domain Diagnostics Approach for Solenoid Pumps Based on Discriminative Features
Akpudo, U. E., & Hur, J.-W. (2020) · IEEE Access · doi:10.1109/access.2020.3025909 · Cited by 18
“…wrapper feature selection methods for diagnosis spans beyond hydraulic pumps to rolling bearings diagnostics/prognostics [34], gear fault detection [35], wireless sensor network intrusion [36], sentiment classification [10], etc. Wrapper methods (and global search algorithms) are efficient for…”
MethodRemaining Useful Life Estimation of Bearings Using Data-Driven Ridge Regression
Park, P., Jung, M., & Marco, P. D. (2020) · Applied Sciences · doi:10.3390/app10248977 · Cited by 18
Yang, J., Gao, T., Zhang, H., & Li, Y. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/acef4a · Cited by 20
Zhao, B., Yuan, Q., & Zhang, H. (2020) · Applied Sciences · doi:10.3390/app10051802 · Cited by 18
A multi-sensor fusion and multi-source domain adaptive fault diagnosis method for rotating machinery
Wang, Q., Xia, J., Li, M., Yin, L., & Xie, X. (2025) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2025.111538 · Cited by 20
Zhang, C., Wang, W., Chen, Z., Fan, B., Jian-guo, W., Gu, F., & Xue, Y. (2021) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062211016505 · Cited by 17
Multisensor Feature Fusion Based Rolling Bearing Fault Diagnosis Method
Tong, J., Liu, C., Pan, H., & Zheng, J. (2022) · Coatings · doi:10.3390/coatings12060866 · Cited by 19
Fu, Q., Liu, Y., Zhang, R., Ye, Z., Qin, H., Tao, F., Li, H., & Zhu, R. (2024) · Measurement · doi:10.1016/j.measurement.2024.115813 · Cited by 19
Sun, J., Ding, H., Li, N., Sun, X., & Dong, X. (2024) · Sensors · doi:10.3390/s24227267 · Cited by 17
“Jing et al. [19] proposed a data fusion method based on a deep CNN that can fuse information from multiple sensors (vibration, noise, and current) adaptively.”
Amarnath, S. K., Inturi, V., Sabareesh, G. R., & Priyadarshini, A. (2025) · Machines · doi:10.3390/machines13020132 · Cited by 18
A New Method of Two-stage Planetary Gearbox Fault Detection Based on Multi-Sensor Information Fusion
Wu, Z., Zhang, Q., Cheng, L., & Tan, S. (2019) · Applied Sciences · doi:10.3390/app9245443 · Cited by 19
An adaptive transfer fault detection method for rotary machine with multi-sensor information fusion
Wang, Q., Yu, L., Hao, L., Yang, S., Zhou, T., & Ji, W. (2024) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02469-1 · Cited by 19
“Some scholars also begin to use multi-sensor information fusion for fault detection (Chen & Li, 2017; Jing et al., 2017; Wu et al., 2018; Xia et al., 2018; Yang et al., 2019).”
Quality-Discriminative Localization of Multisensor Signals for Root Cause Analysis
Cho, Y. S., & Kim, S. B. (2021) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2021.3096529 · Cited by 16
“[17] used deep convolutional neural networks (CNNs) for multiple fault classification by constructing two-dimensional (2-D) multisensor data.”
Method
Metadata
- Authors
- Jing, L., Wang, T., Zhao, M., & Wang, P.
- Affiliations
- School of Mechanical Engineering, Tianjin University, Tianjin 300354, China
- Tianjin University (CN)
- Xi'an Jiaotong University (CN)
- Corresponding author
- Wang, Taiyong
- ORCID
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2017-02-21
- Volume
- 17
- Issue
- 2
- Pages
- 414
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC5335931
- OpenAlex
- W2589171657
- Cited by
- 379
- References
- 44
- Citations by year
- 2026: 14 · 2025: 27 · 2024: 35 · 2023: 41 · 2022: 52 · 2021: 48 · 2020: 60 · 2019: 69 · 2018: 27 · 2017: 4
- FWCI
- 27.48
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51475324)
- National Natural Science Foundation of China and Civil Aviation Administration of China jointly funded project (U1533103)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Keywords
- planetary gearbox, fault diagnosis, sensor fusion, deep convolutional neural networks, condition monitoring, mechanical fault detection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.