The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index; none of the 12 sources its claims cite is checked for support yet.
Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy
Open accessAbstract
This paper presents a study of positioning system that provides advanced information services based on Wi-Fi and Bluetooth Low Energy (BLE) technologies. It uses Wi-Fi for rough positioning and BLE for fine positioning. It is designed for use in public transportation system stations and terminals where the conditions are “hostile” or unfavourable due to signal noise produced by the continuous movement of passengers and buses, data collection conducted in the constant presence thereof, multipath fading, non-line of sight (NLOS) conditions, the fact that part of the wireless communication infrastructure has already been deployed and positioned in a way that may not be optimal for positioning purposes, variable humidity conditions, etc. The ultimate goal is to provide a service that may be used to assist people with special needs. We present experimental results based on scene analysis; the main distance metric used was the Euclidean distance but the Mahalanobis distance was also used in one case. The algorithm employed to compare fingerprints was the weighted k-nearest neighbor one. For Wi-Fi, with only three visible access points, accuracy ranged from 3.94 to 4.82 m, and precision from 5.21 to 7.0 m 90% of the time. With respect to BLE, with a low beacon density (1 beacon per 45.7 m2), accuracy ranged from 1.47 to 2.15 m, and precision from 1.81 to 3.58 m 90% of the time. Taking into account the fact that this system is designed to work in real situations in a scenario with high environmental fluctuations, and comparing the results with others obtained in laboratory scenarios, our results are promising and demonstrate that the system would be able to position users with these reasonable values of accuracy and precision.
Overview
CoChat Summary
TL;DR
The paper presents a two-channel indoor positioning system for a harsh bus-station environment, using Wi-Fi for coarse positioning and BLE for fine positioning and advanced information services. In tests with three Wi-Fi APs and seven BLE beacons, Wi-Fi achieved 3.94–4.82 m accuracy and BLE achieved 1.47–2.15 m accuracy.
Key findings
- Wi-Fi: with only three visible access points, accuracy ranged from 3.94 to 4.82 m and precision from 5.21 to 7.0 m 90% of the time. The best Wi-Fi test (Spearman rank correlation, k = 2) gave a mean error of 3.94 m, precision of 3.19 m 50% of the time and near 8.0 m 90% of the time; the most favourable orientation with k = 4 gave 4.44 m accuracy and precision below 5.21 m 90% of the time.
- BLE: with a low beacon density of 1 beacon per 45.7 m², accuracy ranged from 1.47 to 2.15 m and precision from 1.81 to 3.58 m 90% of the time. The best BLE test (mean RSS values plus Mahalanobis distance, k = 2) achieved a mean error of 1.47 m and precision of 1.81 m 90% of the time. The BLE attenuation model gave a mean distance-estimation error of 1.91 m with one regression line and 1.85 m with two lines, with error below 2.0 m 70% of the time.
- Comparison: WLAN-based systems in the literature showed accuracy of 1.5–5.0 m and precision of 2.0–5.9 m 90% of the time; Bluetooth-based systems showed accuracy of 0.48–3.6 m and precision of 2.0–4.8 m 95% of the time. The authors consider their results reasonable given the challenging, non-laboratory conditions.
- System design: Wi-Fi provides a rough first mental map of the environment, while BLE refines the position and enables advanced information services; three abstraction zones are defined based on the user’s distance from the target.
Methods
- Testbed: a local bus station built of reinforced concrete and located near the sea, with a 40 m × 8 m rectangular section used for tests. Three existing Ubiquiti UniFi 802.11ac Long Range APs (max +20 dBm) and seven iBKS105 BLE beacons (max +4 dBm) were used. Wi-Fi used a 20-cell grid of 4 m × 4 m cells (16 fingerprints/m²); BLE initially used 22 cells of 2 m × 2 m (14.5 fingerprints/m²), later increased to 42 cells.
- Fingerprinting: offline and online RSS databases were built. Wi-Fi offline collection took 30 one-second samples every 2 s (15 samples) per AP and orientation, with 10–26 online target points; BLE offline collection used a Samsung Galaxy S5 running Android 6.0.1, taking 1 sample/s for 30 s per reference point per beacon in aggregate mode, with 10 online target points. Fingerprint comparison used weighted k-nearest neighbours, with Euclidean distance except one BLE test using Mahalanobis distance; Wi-Fi Test 4 used Spearman’s rank correlation coefficient.
- Analysis: accuracy was expressed as mean error and precision via cumulative probability function in percentile format. BLE also used an RSS attenuation model, P(d) = A − 10n·log10(d), fitted with one or two regression lines.
Limitations
- Stated in the paper: comparison with other systems is difficult because each system uses different parameters and reports accuracy/precision differently; Wi-Fi error values are considered upper bounds and could be improved; BLE beacon density and distribution were not ideal (the ideal would be a beacon at each stop); existing Wi-Fi APs were not optimally placed for positioning; external Wi-Fi APs were too weak and excluded; a single-slope regression line may misestimate distances near versus far from a beacon; raw data, noisy conditions, a 4 m Wi-Fi grid and few reference points limit performance.
- Stated future work: greater BLE deployment, smaller reference-point spacing, more samples, shorter collection campaigns, data pre-processing and search filtering, more heterogeneous devices with calibration, and probabilistic positioning algorithms.
- Evident from the text: the evaluation relies on a single testbed and a limited device set (an Asus laptop for Wi-Fi and a Samsung Galaxy S5 for BLE), so device dependence is not fully controlled; the paper itself notes device calibration as future work.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures



















Verification
Claims the paper makes
0 Valid · 1 Not valid · 12 Not checked · 55 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“With respect to BLE, with a low beacon density (1 beacon per 45.7 m2), accuracy ranged from 1.47 to 2.15 m, and precision from 1.81 to 3.58 m 90% of the time.”
§ Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The fluctuations in the RSS are greater for the Acer laptop than the Asus.”
§ Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy > 5. Performance Evaluation > 5.1. Wi-Fi Analysis
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“If two regression lines are used, the following equations are obtained: (10) P(d) = {−57.4−19.4·log10(d), log10(d)≤1.31−53.7−22.0·log10(d), log10(d)>1.31”
§ Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy > 5. Performance Evaluation > 5.2. BLE Analysis
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The worst-performing orientations were north and south.”
§ Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy > 5. Performance Evaluation > 5.1. Wi-Fi Analysis
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In the fourth and final test, the mean orientations were taken and Spearman’s rank correlation coefficient was used to compare reference and target fingerprints, obtaining by comparison with two neighbours an accuracy of 3.94 m and a precision of less than 4 m almost 70% of the time.”
§ Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy > 7. Conclusions and Future Works
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
18 more claims
Create a free account to see all 68 claims and to verify the 1 reference still open.
- It may state two separate claims as one. 34
- The quote only partly states this claim. 6
- Borderline: one of the tests for a substantial claim is unclear. 1
- Probably not a substantial claim. 14
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“The testbed therefore has an area of 320 m2, and consequently a density of 16 fingerprints per m2 [9].”
§ Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy > 3. Preliminaries > 3.2. Deployment Environment
Reported 16 · recomputed 0.0625
Citations
Cites
RADAR: an in-building RF-based user location and tracking system
Bahl, P., & Padmanabhan, V. N. (2002) · Proceedings IEEE INFOCOM 2000. Conference on Computer Communications. Nineteenth Annual Joint Conference of the IEEE Computer and Communications Societies (Cat. No.00CH37064) · doi:10.1109/infcom.2000.832252 · Cited by 8,380 · cited 3×
“The position of the user may be determined primarily through deterministic [4] or probabilistic [30] algorithms.”
BackgroundMethodSurvey of Wireless Indoor Positioning Techniques and Systems
Liu, H., Darabi, H., Banerjee, P., & Liu, J. (2007) · IEEE Transactions on Systems, Man and Cybernetics, Part C (Applications and Reviews) · doi:10.1109/tsmcc.2007.905750 · Cited by 4,098
The Horus WLAN location determination system
Youssef, M., & Agrawala, A. (2005) · Proceedings of the 3rd international conference on Mobile systems, applications, and services · doi:10.1145/1067170.1067193 · Cited by 1,653
Wi-Fi Fingerprint-Based Indoor Positioning: Recent Advances and Comparisons
He, S., & Chan, S.-H. G. (2016) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2464084 · Cited by 1,355
Location Fingerprinting with Bluetooth Low Energy Beacons
Faragher, R., & Harle, R. (2015) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2015.2430281 · Cited by 879
Received-Signal-Strength-Based Indoor Positioning Using Compressive Sensing
Feng, C., Au, W. S. A., Valaee, S., & Tan, Z. (2012) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2011.216 · Cited by 589
A comparative survey of WLAN location fingerprinting methods
Honkavirta, V., Perala, T., Ali-Loytty, S., & Piche, R. (2009) · 2009 6th Workshop on Positioning, Navigation and Communication · doi:10.1109/wpnc.2009.4907834 · Cited by 522
Properties of indoor received signal strength for WLAN location fingerprinting
Kaemarungsi, K., & Krishnamurthy, P. (2004) · The First Annual International Conference on Mobile and Ubiquitous Systems: Networking and Services, 2004. MOBIQUITOUS 2004. · doi:10.1109/mobiq.2004.1331706 · Cited by 498
Smartphone-Based Indoor Localization with Bluetooth Low Energy Beacons
Zhuang, Y., Yang, J., Li, Y., Qi, L., & El-Sheimy, N. (2016) · Sensors · doi:10.3390/s16050596 · Cited by 449
A survey of active and passive indoor localisation systems
Deak, G., Curran, K., & Condell, J. (2012) · Computer Communications · doi:10.1016/j.comcom.2012.06.004 · Cited by 408
Research works printed but not linked: 1
- Ge, T. (2015). Indoor Positioning System based on Bluetooth Low Energy for Blind or Visually Impaired Users. [Master’s Thesis, KTH Royal Institute of Technology, School of Information and Communication Technology (ICT), Communication Systems (CoS) Department].
Cited by
Cantón Paterna, V., Calveras Augé, A., Paradells Aspas, J., & Pérez Bullones, M. (2017) · Sensors · doi:10.3390/s17122927 · Cited by 227
A Hybrid Method to Improve the BLE-Based Indoor Positioning in a Dense Bluetooth Environment
Huang, K., He, K., & Xue-cheng, D. (2019) · Sensors · doi:10.3390/s19020424 · Cited by 74
Crețu-Sîrcu, A. L., Schiøler, H., Cederholm, P., Sîrcu, I., Schjørring, A., Rodríguez, I., Berardinelli, G., & Madsen, O. (2022) · Sensors · doi:10.3390/s22082927 · Cited by 42
Ke, C.-K., Wu, M.-Y., Chan, Y.-W., & Lu, K.-C. (2018) · Energies · doi:10.3390/en11123464 · Cited by 33
Improved Bluetooth Low Energy Sensor Detection for Indoor Localization Services
Pušnik, M., Galun, M., & Šumak, B. (2020) · Sensors · doi:10.3390/s20082336 · Cited by 36
Epidemic contact tracing with smartphone sensors
Nguyen, K. A., Luo, Z., & Watkins, C. (2020) · Journal of Location Based Services · doi:10.1080/17489725.2020.1805521 · Cited by 28
Flueratoru, L., Shubina, V., Niculescu, D., & Lohan, E. S. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3095710 · Cited by 34
Lie, M. M. K., & Kusuma, G. P. (2020) · Neural Computing and Applications · doi:10.1007/s00521-020-05159-0 · Cited by 26
An Innovative Fingerprint Location Algorithm for Indoor Positioning Based on Array Pseudolite
Huang, L. H., Gan, X., Yu, B., Zhang, H., Li, S., Cheng, J., Liang, X., & Wang, B. (2019) · Sensors · doi:10.3390/s19204420 · Cited by 25
Advancing indoor positioning systems: innovations, challenges, and applications in mobile robotics
Deshmukh, R. A., Hasamnis, M. A., Kulkarni, M. B., & Bhaiyya, M. L. (2025) · Robotica · doi:10.1017/s0263574725101872 · Cited by 34
de Blasio, G., Rodríguez-Rodríguez, J. C., García, C. R., & Quesada-Arencibia, A. (2019) · Sensors · doi:10.3390/s19143087 · Cited by 27
Self-citationRespiratory monitoring system using Bluetooth Low Energy
Janik, P., Pielka, M., Janik, M. A., & Wróbel, Z. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.12.040 · Cited by 16
Sarker, A., Emenonye, D.-R., Kelliher, A., Rikakis, T., Buehrer, R. M., & Asbeck, A. T. (2022) · Sensors · doi:10.3390/s22062300 · Cited by 20
Low-Cost Indoor Localization System Combining Multilateration and Kalman Filter
Sestrem, L., Rayel, O. K., & Leitão, P. (2021) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie45552.2021.9576353 · Cited by 14
Toward Robust Interpretable Human Movement Pattern Analysis in a Workplace Setting
Booth, B. M., Feng, T., Jangalwa, A., & Narayanan, S. S. (2019) · IEEE International Conference on Acoustics Speech and Signal Processing · doi:10.1109/icassp.2019.8683730 · Cited by 13
Bluetooth Low Energy Technology Applied to Indoor Positioning Systems: An Overview
de Blasio, G., Quesada-Arencibia, A., García, C. R., & Rodríguez-Rodríguez, J. C. (2020) · Lecture notes in computer science · doi:10.1007/978-3-030-45093-9_11 · Cited by 13
Self-citationReal-Time Pedestrian Flow Analysis Using Networked Sensors for a Smart Subway System
Hwang, S., Lee, Z., & Kim, J. (2019) · Sustainability · doi:10.3390/su11236560 · Cited by 12
Bluetooth Low Energy Microlocation Asset Tracking (BLEMAT) in a Context-Aware Fog Computing System
Pešić, S., Tošić, M., Iković, O., Radovanović, M., Ivanović, M. D., & Bošković, D. (2018) · International Conference on Web Intelligence, Mining and Semantics · doi:10.1145/3227609.3227652 · Cited by 14
Puyalto, A. R., Armand, M., Lastres, C., Pedro, J. D., & García-Santos, A. (2021) · Sustainability · doi:10.3390/su132212607 · Cited by 13
Ke, C.-K., Ho, W.-C., & Lu, K.-C. (2019) · Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering · doi:10.1007/978-3-030-06158-6_24 · Cited by 9
Puyalto, A. R., García-Navalón, E., Santiso-Hernandez, J., Delgado-Rodríguez, E., & García-Santos, A. (2021) · Buildings · doi:10.3390/buildings11110513 · Cited by 13
Semi-Automatic Self-Calibrating Indoor Localization Using BLE Beacon Multilateration
Shchekotov, M., & Shilov, N. G. (2018) · Conference of Open Innovations Association (FRUCT) · doi:10.23919/fruct.2018.8588081 · Cited by 9
Xu, H., Meng, F., Liu, H., Shao, H., & Sun, L. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3443096 · Cited by 12
Design Space Exploration of a Multi-Model AI-Based Indoor Localization System
Kotrotsios, K., Fanariotis, A., Leligou, H. C., & Orphanoudakis, T. G. (2022) · Sensors · doi:10.3390/s22020570 · Cited by 12
Indoor Navigation Ontology for Smartphone Semi-Automatic Self-Calibration Scenario
Shchekotov, M., Pashkin, M., & Smirnov, A. (2019) · Conference of Open Innovations Association (FRUCT) · doi:10.23919/fruct.2019.8711902 · Cited by 7
Water Quality Sensing and Spatio-Temporal Monitoring Structure with Autocorrelation Kernel Methods
Vizcaino, I. P., Carrera, E. V., Muñoz-Romero, S., Cumbal, L. H., & Rojo‐Álvarez, J. L. (2017) · Sensors · doi:10.3390/s17102357 · Cited by 5
Sánchez-Rodríguez, D., González, A., Ley-Bosch, C., & Quintana-Suárez, M. A. (2019) · Electronics · doi:10.3390/electronics8010103 · Cited by 5
Application of fuzzy logic in a secure beacon-based guidance system for public transportation
Molina‐Gil, J., Caballero‐Gil, P., Quesada-Arencibia, A., & de Blasio, G. (2022) · International Journal of Applied Mathematics and Computer Science · doi:10.34768/amcs-2022-0027 · Cited by 4
Self-citationGu, Z., Guo, W., Li, C., Zhu, X., & Guo, T. (2018) · Sensors · doi:10.3390/s18030711 · Cited by 4
Impact of Beacon-Dependent Parameters on Bluetooth Low Energy Indoor Positioning Accuracy
de Blasio, G., Quesada-Arencibia, A., Rodríguez-Rodríguez, J. C., García, C. R., & Moreno-Díaz, R. (2018) · International Conference on Ubiquitous Computing and Ambient Intelligence (UCAmI) · doi:10.3390/proceedings2191223 · Cited by 4
Self-citationAnalysis of Distance and Similarity Metrics in Indoor Positioning Based on Bluetooth Low Energy
de Blasio, G., Quesada-Arencibia, A., García, C. R., Moreno-Díaz, R., & Rodríguez-Rodríguez, J. C. (2017) · Lecture notes in computer science · doi:10.1007/978-3-319-67585-5_23 · Cited by 4
Self-citationDeng, G., Zhang, W., Wu, Z., Guan, M., & Zhang, D. (2024) · Sensor Review · doi:10.1108/sr-05-2024-0484 · Cited by 4
Study of Dynamic Factors in Indoor Positioning for Harsh Environments
de Blasio, G., Quesada-Arencibia, A., García, C. R., Molina‐Gil, J., & Caballero‐Gil, C. (2017) · Lecture notes in computer science · doi:10.1007/978-3-319-67585-5_8 · Cited by 2
Self-citationThe ontology driven SLAM based indoor localization technique
Shchekotov, S. V., Smirnov, N. S., & Pashkin, M. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1801/1/012007 · Cited by 2
Indoor Positioning System for Ubiquitous Computing Environments
Santos, P. A., Porfírio, R. P., Madeira, R. N., & Correia, N. M. R. (2021) · Lecture notes in computer science · doi:10.1007/978-3-030-91608-4_59
Puyalto, A. R. (2021) · UPM Digital Archive (Technical University of Madrid) · doi:10.20868/upm.thesis.69903
Çakır, R., & Doğanalp, S. (2024) · Afyon Kocatepe University Journal of Sciences and Engineering · doi:10.35414/akufemubid.1389005
Multi-objective Deployment of Wireless Sensor Networks in 3-D Environments using MetaheuristicsPreprint
Barnawi, A. Y., & Bawazir, A. (2023) · Research Square · doi:10.21203/rs.3.rs-2798314/v1
Method of indoor navigation and collaborative semi-automatic Wi-Fi radiomap construction
Shchekotov, M. (2018) · Информационно-управляющие системы · doi:10.31799/1684-8853-2018-6-95-104
Nikodem, J., de Blasio, G., Gawłowski, P., Klempous, R., & Quesada-Arencibia, A. (2022) · Lecture notes in computer science · doi:10.1007/978-3-031-25312-6_61 · Cited by 1
Self-citation- Self-citation
Metadata
- Authors
- De Blasio, G., Quesada-Arencibia, A., García, C., Molina-Gil, J., & Caballero-Gil, C.
- Affiliations
- Instituto Universitario de Ciencias y Tecnologías Cibernéticas, ULPGC, 35001 Las Palmas de Gran Canaria, Las Palmas, Spain
- Universidad de Las Palmas de Gran Canaria (ES)
- Department of Computer Engineering and Systems, University of La Laguna, 38200 San Cristóbal de La Laguna, Santa Cruz de Tenerife, Spain
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2017-06-06
- Volume
- 17
- Issue
- 6
- Pages
- 1299
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC5492348
- OpenAlex
- W2623158358
- Cited by
- 59
- References
- 32
- Citations by year
- 2026: 4 · 2025: 1 · 2024: 5 · 2023: 1 · 2022: 7 · 2021: 10 · 2020: 7 · 2019: 11 · 2018: 9 · 2017: 4
- FWCI
- 3.52
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Acceda (Universidad de Las Palmas de Gran Canaria) (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Zenodo (CERN European Organization for Nuclear Research) (cc-by)
- Funders
- Fundación CajaCanarias (TEC2014-54110-R, DIG02-INSITU)
- Ministerio de Economía y Competitividad (DIG02-INSITU, TEC2014-54110-R)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Indoor and Outdoor Localization Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Optical Wireless Communication Technologies
- Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
- Keywords
- indoor positioning, Wi-Fi fingerprinting, Bluetooth Low Energy, extreme environments, non-line-of-sight, multipath fading, weighted k-nearest neighbors, Mahalanobis distance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.