The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Advanced Micro- and Nano-Gas Sensor Technology: A Review
Open accessAbstract
Micro- and nano-sensors lie at the heart of critical innovation in fields ranging from medical to environmental sciences. In recent years, there has been a significant improvement in sensor design along with the advances in micro- and nano-fabrication technology and the use of newly designed materials, leading to the development of high-performance gas sensors. Advanced micro- and nano-fabrication technology enables miniaturization of these sensors into micro-sized gas sensor arrays while maintaining the sensing performance. These capabilities facilitate the development of miniaturized integrated gas sensor arrays that enhance both sensor sensitivity and selectivity towards various analytes. In the past, several micro- and nano-gas sensors have been proposed and investigated where each type of sensor exhibits various advantages and limitations in sensing resolution, operating power, response, and recovery time. This paper presents an overview of the recent progress made in a wide range of gas-sensing technology. The sensing functionalizing materials, the advanced micro-machining fabrication methods, as well as their constraints on the sensor design, are discussed. The sensors’ working mechanisms and their structures and configurations are reviewed. Finally, the future development outlook and the potential applications made feasible by each category of the sensors are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Verwendung von Schwingquarzen zur W�gung d�nner Schichten und zur Mikrow�gung
Sauerbrey, G. (1959) · Zeitschrift f�r Physik · doi:10.1007/bf01337937 · Cited by 9,653
Use of quartz vibration for weighing thin films on a microbalance
Sauerbrey, G., & Sauerbrey, F. (1959) · The European Physical Journal A · Cited by 6,791
Metal Oxide Gas Sensors: Sensitivity and Influencing Factors
Wang, C., Yin, L., Zhang, L., Xiang, D., & Gao, R. (2010) · Sensors · doi:10.3390/s100302088 · Cited by 2,928
Semiconductor metal oxide gas sensors: A review
Dey, A. (2018) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2017.12.036 · Cited by 2,374
Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview
Kim, H.-J., & Lee, J.-H. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2013.11.005 · Cited by 2,258
“Synthetic Metals”: A Novel Role for Organic Polymers (Nobel Lecture)
MacDiarmid, A. G. (2001) · Angewandte Chemie International Edition · doi:10.1002/1521-3773(20010716)40:14<2581::aid-anie2581>3.0.co;2-2 · Cited by 2,025
Gas Sensors Based on Conducting Polymers
Bai, H., & Shi, G. (2007) · Sensors · doi:10.3390/s7030267 · Cited by 1,577
Metal Oxide Semi-Conductor Gas Sensors in Environmental Monitoring
Fine, G. F., Cavanagh, L. M., Afonja, A., & Binions, R. (2010) · Sensors · doi:10.3390/s100605469 · Cited by 1,477
A Survey on Gas Sensing Technology
Liu, X., Cheng, S., Liu, H., Hu, S., Zhang, D., & Ning, H. (2012) · Sensors · doi:10.3390/s120709635 · Cited by 1,416
Adsorption Mechanisms of Organic Chemicals on Carbon Nanotubes
Pan, B., & Xing, B. (2008) · Environmental Science & Technology · doi:10.1021/es801777n · Cited by 1,261
Polymers in sensor applications
Adhikari, B., & Majumdar, S. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.03.002 · Cited by 1,181
A Survey on Gas Sensing Technology
Liu, X., Cheng, S., Liu, H., Hu, S., Zhang, D., & Ning, H. (2012) · Cited by 926
Methods for carbon nanotubes synthesis—review
Prasek, J., Drbohlavova, J., Chomoucka, J., Hubalek, J., Jasek, O., Adam, V., & Kizek, R. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12254a · Cited by 796
2D Materials for Gas Sensing Applications: A Review on Graphene Oxide, MoS2, WS2 and Phosphorene
Donarelli, M., & Ottaviano, L. (2018) · Sensors · doi:10.3390/s18113638 · Cited by 644
Array-Based Vapor Sensing Using Chemically Sensitive, Carbon Black−Polymer Resistors
Lonergan, M. C., Severin, E. J., Doleman, B. J., Beaber, S. A., Grubbs, R. H., & Lewis, N. S. (1996) · Chemistry of Materials · doi:10.1021/cm960036j · Cited by 633
Temperature modulation in semiconductor gas sensing
Lee, A. (1999) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(99)00241-5 · Cited by 525
Carbon nanotubes: Sensor properties. A review
Zaporotskova, I. V., Boroznina, N. P., Parkhomenko, Y. N., & Kozhitov, L. V. (2016) · Modern Electronic Materials · doi:10.1016/j.moem.2017.02.002 · Cited by 464
Photonic crystal sensors: An overview
Nair, R. V., & Vijaya, R. (2010) · Progress in Quantum Electronics · doi:10.1016/j.pquantelec.2010.01.001 · Cited by 409
Selective gas detection using a carbon nanotube sensor
Chopra, S., McGuire, K., Gothard, N., Rao, A. M., & Pham, A. (2003) · Applied Physics Letters · doi:10.1063/1.1610251 · Cited by 364
Martin, S. J., Frye, G. C., & Senturia, S. D. (1994) · Analytical Chemistry · doi:10.1021/ac00086a003 · Cited by 332
High-Q microwave acoustic resonators and filters
Lakin, K. M., Kline, G. R., & McCarron, K. T. (1993) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/22.260698 · Cited by 318
An overview of the synthesis of ordered mesoporous materials
Li, W., & Zhao, D. (2013) · Chem. Commun. · doi:10.1039/c2cc36964h · Cited by 305
Szulczyński, B., & Gębicki, J. (2017) · Environments · doi:10.3390/environments4010021 · Cited by 282
HIGH Q MICROWAVE ACOUSTIC RESONATORS AND FILTERS
Piezoelectric, E. (1993) · Cited by 278
Carbon monoxide (CO) optical gas sensor based on ZnO thin films
Paliwal, A., Sharma, A., Tomar, M., & Gupta, V. (2017) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2017.05.064 · Cited by 221
Study on a Detector for Gaseous Components Using Semiconductive Thin Films.
Seiyama, T., & Kagawa, S. (1966) · Analytical Chemistry · doi:10.1021/ac60240a031 · Cited by 217
Nanofabrication in polymer matrices
Liu, T., Burger, C., & Chu, B. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00077-1 · Cited by 209
Fabrication of Metal‐Organic Framework‐Containing Silica‐Colloidal Crystals for Vapor Sensing
Lu, G., Farha, O. K., Kreno, L. E., Schoenecker, P. M., Walton, K. S., Van Duyne, R. P., & Hupp, J. T. (2011) · Advanced Materials · doi:10.1002/adma.201102116 · Cited by 192
Surface Acoustic Wave (SAW) for Chemical Sensing Applications of Recognition Layers
Mujahid, A., & Dickert, F. (2017) · Sensors · doi:10.3390/s17122716 · Cited by 189
Ordered porous metal oxide semiconductors for gas sensing
Zhou, X., Cheng, X., Zhu, Y., Elzatahry, A. A., Alghamdi, A., Deng, Y., & Zhao, D. (2018) · Chinese Chemical Letters · doi:10.1016/j.cclet.2017.06.021 · Cited by 176
Boron- and nitrogen-doped multi-wall carbon nanotubes for gas detection
Adjizian, J.-J., Leghrib, R., Koos, A. A., Suarez-Martinez, I., Crossley, A., Wagner, P., Grobert, N., Llobet, E., & Ewels, C. P. (2014) · Carbon · doi:10.1016/j.carbon.2013.09.064 · Cited by 161
Gerardo, C. D., Cretu, E., & Rohling, R. N. (2018) · Microsystems & Nanoengineering · doi:10.1038/s41378-018-0022-5 · Cited by 89
Photonic Crystals for Optical Sensing: A Review
Troia, B., Paolicelli, A., De, F., & Passaro, V. M. N. (2013) · InTech eBooks · doi:10.5772/53897 · Cited by 81
Calix[4]arene coated QCM sensors for detection of VOC emissions: Methylene chloride sensing studies
Temel, F., & Tabakcı, M. (2016) · Talanta · doi:10.1016/j.talanta.2016.03.026 · Cited by 76
Chemical Vapor Detection Using a Capacitive Micromachined Ultrasonic Transducer
Lee, H. J., Park, K. K., Kupnik, M., Oralkan, Ö., & Khuri-Yakub, B. T. (2011) · Analytical Chemistry · doi:10.1021/ac201626b · Cited by 72
Polymer-Based Technologies for Sensing Applications
Carvalho, W. S. P., Wei, M., Ikpo, N., Gao, Y., & Serpe, M. J. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b04751 · Cited by 60
Zhao, W., Al-Nasser, L. F., Shan, S., Li, J., Skeete, Z. R., Kang, N., Luo, J., Lu, S. F., Zhong, C., Grausgruber, C. J., et al. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.03.121 · Cited by 45
A High Sensitivity and Wide Dynamic Range Fiber-Optic Sensor for Low-Concentration VOC Gas Detection
Khan, M. R. R., & Kang, S. (2014) · Sensors · doi:10.3390/s141223321 · Cited by 40
Eslami, M. R., & Alizadeh, N. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.09.060 · Cited by 40
Cited by
Semiconductor Gas Sensors: Materials, Technology, Design, and Application
Nikolic, M. V., Milovanovic, V., Vasiljevic, Z. Z., & Stamenkovic, Z. (2020) · Sensors · doi:10.3390/s20226694 · Cited by 590
Tan, J., & Xu, J. (2020) · Artificial Intelligence in Agriculture · doi:10.1016/j.aiia.2020.06.003 · Cited by 521
Sensors for daily life: A review
Javaid, M., Haleem, A., Rab, S., Pratap Singh, R., & Suman, R. (2021) · Sensors International · doi:10.1016/j.sintl.2021.100121 · Cited by 430
Review on Smart Gas Sensing Technology
Feng, S., Farha, F., Li, Q., Wan, Y., Xu, Y., Zhang, T., & Ning, H. (2019) · Sensors · doi:10.3390/s19173760 · Cited by 323
Asri, M. I. A., Hasan, M. N., Fuaad, M. R. A., Yunos, Y. M., & Ali, M. S. M. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3091854 · Cited by 269
Metadata
- Authors
- Nazemi, H., Joseph, A., Park, J., & Emadi, A.
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2019-03-14
- Volume
- 19
- Issue
- 6
- Pages
- 1285
- ISSN
- 1424-8220 (ISSN-L)
- OpenAlex
- W2921832736
- Cited by
- 614
- References
- 39
- FWCI
- 24.85
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.