A CMOS Integrator-Based Clock-Free Time-to-Digital Converter for Home-Monitoring LiDAR Sensors
Open accessThe DOI matches its Crossref record; 23 of the 24 references it cites were found in a registry or an index.
Abstract
This paper presents a nine-bit integrator-based time-to-digital converter (I-TDC) realized in a 180 nm CMOS technology for the applications of indoor home-monitoring light detection and ranging (LiDAR) sensors. The proposed I-TDC exploits a clock-free configuration so as to discard clock-related dynamic power consumption and some notorious issues such as skew, glitch, and synchronization. It consists of a one-dimensional (1D) flash TDC to generate coarse-control codes and an integrator with a peak detection and hold (PDH) circuit to produce fine-control codes. A thermometer-to-binary converter is added to the 1D flash TDC, yielding four-bit coarse codes so that the measured detection range can be represented by nine-bit digital codes in total. Test chips of the proposed I-TDC demonstrate the measured results of the 53 dB dynamic range, i.e., the maximum detection range of 33.6 m and the minimum range of 7.5 cm. The chip core occupies the area of 0.14 × 1.4 mm2, with the power dissipation of 1.6 mW from a single 1.2-V supply.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Previously, various TDCs have been suggested to achieve precise time-interval measurements [14][15][16].Yet, they mostly require complex algorithms.”
From A CMOS Optoelectronic Transimpedance Amplifier Using Concurrent Automatic Gain Control for LiDAR Sensors (2024) · cites this paper as [15]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A high-resolution CMOS time-to-digital converter utilizing a Vernier delay line
Dudek, P., Szczepanski, S., & Hatfield, J. V. (2000) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.823449 · Cited by 682 · cited 1×
“In addition, the 1st-order mismatches occurring in delay cells can be cancelled [12].”
BackgroundA CMOS Time-to-Digital Converter With Better Than 10 ps Single-Shot Precision
Jansson, J.-P., Mantyniemi, A., & Kostamovaara, J. (2006) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2006.874281 · Cited by 262
Kim, K., Kim, Y.-H., Yu, W., & Cho, S. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2013.2237996 · Cited by 167 · cited 1×
“TA TDC provides fine-time resolution and a high conversion rate with residue time [16].”
BackgroundNissinen, J., Nissinen, I., & Kostamovaara, J. (2009) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2009.2017006 · Cited by 103 · cited 1×
“Here, it is noted that the resolution of the TDC is determined by the minimum detection range, whereas the accuracy is affected by the quantization error caused by the rise time of the laser pulses and the delay of the receiver circuits [8].”
BackgroundAnalog CMOS peak detect and hold circuits. Part 1. Analysis of the classical configuration
Geronimo, G. D., O'Connor, P., & Kandasamy, A. (2002) · Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment · doi:10.1016/s0168-9002(01)02059-9 · Cited by 95 · cited 1×
“Figure 2 depicts the block diagram of the proposed nine-bit I-TDC that combines a 1D flash TDC for coarse control [17] and an integrator charging circuit with a peak–detect–hold circuit for fine control [18], hence enabling us to provide fine resolution, wide detection range, low dynamic power consumption, and fast co…”
A High-Sensitivity and Low-Walk Error LADAR Receiver for Military Application
Cho, H.-S., Kim, C.-H., & Lee, S.-G. (2014) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2014.2327282 · Cited by 88 · cited 1×
“Nevertheless, due to the jitter accumulation and mismatch-related non-linearities, it is difficult to achieve a large input dynamic range while obtaining fine resolution characteristics [9].”
BackgroundAn Integrated Laser Radar Receiver Channel Utilizing a Time-Domain Walk Error Compensation Scheme
Kurtti, S., & Kostamovaara, J. (2011) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2010.2047663 · Cited by 71 · cited 1×
“Additionally, the dynamics of the received echo can be wide (>1:1000) even with a single transmitted pulse for targets located within the range of tens of meters [5].”
BackgroundA Cyclic Vernier TDC for ADPLLs Synthesized From a Standard Cell Library
Park, Y.-M., & Wentzloff, D. D. (2011) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2011.2158490 · Cited by 67 · cited 1×
“However, this cyclic Vernier TDC suffers from high switching noise, large dynamic power consumption, the risk of metastability, and a large latency of the fine step measurement [14].”
BackgroundAn 11 b 7 ps Resolution Two-Step Time-to-Digital Converter With 3-D Vernier Space
Kim, Y., & Kim, T. W. (2014) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2014.2304656 · Cited by 66 · cited 2×
“In [22], an 11-bit 3D Vernier TDC was demonstrated with very low power dissipation.”
MethodAn efficient high-resolution 11-bit noise-shaping multipath gated ring oscillator TDC
Straayer, M. Z., & Perrott, M. H. (2008) · IEEE Symposium on VLSI Circuits (VLSI-Circuits) · doi:10.1109/vlsic.2008.4585960 · Cited by 66 · cited 1×
“Although it can yield good noise characteristics by the 1st-order noise shaping, the circuit structure is quite complicated [15].”
Background
Research works printed but not linked: 1
- Soni, 2017, Comparative Study of Delay Line Based Time to Digital Converter Using FPGA, Int. Res. J. Eng. Technol., 04, 1169
Cited by
Time-to-digital conversion techniques: a survey of recent developments
Szyduczyński, J., Kościelnik, D., & Miśkowicz, M. (2023) · Measurement · doi:10.1016/j.measurement.2023.112762 · Cited by 81
A Low-Power Optoelectronic Receiver IC for Short-Range LiDAR Sensors in 180 nm CMOS
Choi, S., Chon, Y., & Park, S. (2024) · Micromachines · doi:10.3390/mi15091066 · Cited by 4
Self-citationChon, Y., Choi, S., & Park, S.-M. (2024) · Photonics · doi:10.3390/photonics11100974 · Cited by 3
Self-citationAn 8 × 8 CMOS Optoelectronic Readout Array of Short-Range LiDAR Sensors
Chon, Y., Choi, S., Joo, J., & Park, S. M. (2024) · Sensors · doi:10.3390/s24206686 · Cited by 2
Self-citationA Programmable Delay Line-Based Measurement Methodology for CMOS LiDAR Receivers
Seo, B., Lee, S., Park, S., & Park, S.-M. (2026) · Micromachines · doi:10.3390/mi17101149
“Finally, a peak-detect-and-hold (PDH) circuit captures and stores the peak value of the charger voltage, which serves as the final analog output of the TVC [15,16].”
Self-citation
Metadata
- Authors
- He, Y., & Park, S. M.
- Affiliations
- Ewha Womans University (KR)
- Corresponding author
- Park, Sung Min
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2022-01-11
- Volume
- 22
- Issue
- 2
- Pages
- 554
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC8778521
- OpenAlex
- W4205554609
- Cited by
- 5
- References
- 24
- Citations by year
- 2026: 1 · 2024: 3 · 2023: 1
- FWCI
- 0.44
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Research Foundation of Korea (2020R1A2C1008879)
- Topics
- Physical Sciences › Physics and Astronomy › Instrumentation › Advanced Optical Sensing Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in PLL and VCO Technologies
- Keywords
- time-to-digital converter, LiDAR sensor, home monitoring, dynamic power reduction, 0.18 μm CMOS, range measurement
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.