The DOI matches its Crossref record; 97 of the 98 references it cites were found in a registry or an index, and 1 are not checked yet.
A Novel CNN-LSTM Hybrid Model for Prediction of Electro-Mechanical Impedance Signal Based Bond Strength Monitoring
Open accessAbstract
The recent application of deep learning for structural health monitoring systems for damage detection has potential for improvised structure performance and maintenance for long term durability, and reliable strength. Advancements in electro-mechanical impedance (EMI) techniques have sparked attention among researchers to develop novel monitoring techniques for structural monitoring and evaluation. This study aims to determine the performance of EMI techniques using a piezo sensor to monitor the development of bond strength in reinforced concrete through a pull-out test. The concrete cylindrical samples with embedded steel bars were prepared, cured for 28 days, and a pull-out test was performed to measure the interfacial bond between them. The piezo coupled signatures were obtained for the PZT patch bonded to the steel bar. The damage qualification is performed through the statistical indices, i.e., root-mean-square deviation (RMSD) and correlation coefficient deviation metric (CCDM), were obtained for different displacements recorded for axial pull. Furthermore, this study utilizes a novel Convolutional Neural Network-Long Short-Term Memory (CNN-LSTM)-based hybrid model, an effective regression model to predict the EMI signatures. These results emphasize the efficiency and potential application of the deep learning-based hybrid model in predicting EMI-based structural signatures. The findings of this study have several implications for structural health diagnosis using a deep learning-based model for monitoring and conservation of building heritage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures


















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The problem of data temporal and spatial feature extraction can be solved using a combination of the CNN and RNN methods, such as CNN with GRU [64,109,123], CNN with LSTM [27,178,179,180,181,182], CNN with Auto-encoder and [183], CNN with echo state networks [113], etc.”
From Deep Learning for Structural Health Monitoring: Data, Algorithms, Applications, Challenges, and Trends (2023) · cites this paper as [27]
The cited source says what the claim attributes to it.
In the citing paper
“Generally, the training set’s ratio to the test set is 8:2 [27,36,182,198] or 7:3 [15,58,187].”
From Deep Learning for Structural Health Monitoring: Data, Algorithms, Applications, Challenges, and Trends (2023) · cites this paper as [27]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Review of Recurrent Neural Networks: LSTM Cells and Network Architectures
Yu, Y., Si, X., Hu, C., & Zhang, J. (2019) · Neural Computation · doi:10.1162/neco_a_01199 · Cited by 5,591
Understanding of a convolutional neural network
Albawi, S., Mohammed, T. A., & Al-Zawi, S. (2017) · 2017 International Conference on Engineering and Technology (ICET) · doi:10.1109/icengtechnol.2017.8308186 · Cited by 3,986
Deep Learning‐Based Crack Damage Detection Using Convolutional Neural Networks
Cha, Y., Choi, W., & Büyüköztürk, O. (2017) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12263 · Cited by 3,295
Review on Convolutional Neural Networks (CNN) in vegetation remote sensing
Kattenborn, T., Leitloff, J., Schiefer, F., & Hinz, S. (2021) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/j.isprsjprs.2020.12.010 · Cited by 1,805
Cha, Y., Choi, W., Suh, G., Mahmoudkhani, S., & Büyüköztürk, O. (2018) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12334 · Cited by 1,558
Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward
Park, G., Sohn, H., Farrar, C. R., & Inman, D. J. (2003) · The Shock and Vibration Digest · doi:10.1177/05831024030356001 · Cited by 1,060
Convolutional Neural Network (CNN) for Image Detection and Recognition
Chauhan, R., Ghanshala, K. K., & Joshi, R. C. (2018) · 2018 First International Conference on Secure Cyber Computing and Communication (ICSCCC) · doi:10.1109/icsccc.2018.8703316 · Cited by 661
Mishra, M., Lourenço, P. B., & Ramana, G. V. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103954 · Cited by 479
A comparison of deep networks with ReLU activation function and linear spline-type methods
Eckle, K., & Schmidt-Hieber, J. (2019) · Neural Networks · doi:10.1016/j.neunet.2018.11.005 · Cited by 409
Crack and Noncrack Classification from Concrete Surface Images Using Machine Learning
Kim, H., Ahn, E., Shin, M., & Sim, S.-H. (2019) · Structural Health Monitoring · doi:10.1177/1475921718768747 · Cited by 315
Concrete early-age strength monitoring using embedded piezoelectric transducers
Gu, H., Song, G., Dhonde, H., Mo, Y. L., & Yan, S. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/6/038 · Cited by 312
Bond strength between blended slag and Class F fly ash geopolymer concrete with steel reinforcement
Castel, A., & Foster, S. J. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.02.016 · Cited by 304
Vibration‐based structural state identification by a 1‐dimensional convolutional neural network
Zhang, Y., Miyamori, Y., Mikami, S., & Saito, T. (2019) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12447 · Cited by 303
Taffese, W. Z., & Sistonen, E. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.01.016 · Cited by 255
Structural impedance based damage diagnosis by piezo‐transducers
Bhalla, S., & Kiong Soh, C. (2003) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.307 · Cited by 227
An Impedance Method for Dynamic Analysis of Active Material Systems
Liang, C., Sun, F. P., & Rogers, C. A. (1994) · Journal of Vibration and Acoustics · doi:10.1115/1.2930387 · Cited by 210
Calibration of piezo-impedance transducers for strength prediction and damage assessment of concrete
Soh, C. K., & Bhalla, S. (2005) · Smart Materials and Structures · doi:10.1088/0964-1726/14/4/026 · Cited by 209
Effects of confinements on the bond strength between concrete and corroded steel bars
Lin, H., & Zhao, Y. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.040 · Cited by 178
A New Structural Health Monitoring Strategy Based on PZT Sensors and Convolutional Neural Network
De Oliveira, M. A., Monteiro, A. V., & Vieira Filho, J. (2018) · Sensors · doi:10.3390/s18092955 · Cited by 164
Yang, Y., Lim, Y. Y., & Soh, C. K. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/3/035008 · Cited by 162
Victor Giurgiutiu, B., & Rogers, C. A. (1998) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.316923 · Cited by 158
Piezoelectric Active Sensor Self-Diagnostics Using Electrical Admittance Measurements
Park, G., Farrar, C. R., Rutherford, A. C., & Robertson, A. N. (2006) · Journal of vibration and acoustics · doi:10.1115/1.2202157 · Cited by 156
Tawie, R., & Lee, H. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.08.011 · Cited by 136
Structural Health Monitoring via Measured Ritz Vectors Utilizing Artificial Neural Networks
Lam, H., Yuen, K., & Beck, J. L. (2006) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/j.1467-8667.2006.00431.x · Cited by 128
A Study of Concrete Slab Damage Detection Based on the Electromechanical Impedance Method
Xian-yan, H., Zhu, H., & Wang, D. (2014) · Sensors · doi:10.3390/s141019897 · Cited by 128
Civera, M., Mugnaini, V., & Fragonara, L. Z. (2022) · Structural Control and Health Monitoring · doi:10.1002/stc.3028 · Cited by 116
Machine Learning Based Quantitative Damage Monitoring of Composite Structure
Qing, X., Liao, Y., Wang, Y., Chen, B., Zhang, F., & Wang, Y. (2022) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2022.2054878 · Cited by 112
Selva, P., Cherrier, O., Pommier‐Budinger, V., Lachaud, F., & Morlier, J. (2013) · Engineering Structures · doi:10.1016/j.engstruct.2013.05.025 · Cited by 111
Moghadas, D. (2020) · Geophysical Journal International · doi:10.1093/gji/ggaa161 · Cited by 111
Jiang, T., Kong, Q., Patil, D., Luo, Z., Huo, L., & Song, G. (2017) · IEEE Sensors Journal · doi:10.1109/jsen.2017.2660301 · Cited by 107
Application of convolutional neural networks for evaluation of disease severity in tomato plant
Verma, S., Chug, A., & Singh, A. P. (2020) · Journal of Discrete Mathematical Sciences and Cryptography · doi:10.1080/09720529.2020.1721890 · Cited by 96
Estimation of bond strength between UHPC and reinforcing bars using machine learning approaches
Li, Z., Qi, J., Hu, Y., & Wang, J. (2022) · Engineering Structures · doi:10.1016/j.engstruct.2022.114311 · Cited by 93
Bond-Slip Monitoring of Concrete Structures Using Smart Sensors—A Review
Huo, L., Cheng, H., Kong, Q., & Chen, X. (2019) · Sensors · doi:10.3390/s19051231 · Cited by 91
Advances in the Structural Health Monitoring of Bridges Using Piezoelectric Transducers
Chen, Y., & Xue, X. (2018) · Sensors · doi:10.3390/s18124312 · Cited by 87
Concrete damage diagnosis using electromechanical impedance technique
Liu, P., Wang, W.-L., Chen, Y., Feng, X., & Miao, L. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.173 · Cited by 85
Ahmad, M., Hu, J., Ahmad, F., Tang, X., Amjad, M., Iqbal, M. J., Asim, M., & Farooq, A. (2021) · Materials · doi:10.3390/ma14081983 · Cited by 82
Khazaee, M., Dérian, P., & Mouraud, A. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.09.032 · Cited by 82
Liang, Y., Li, D., Parvasi, S. M., Kong, Q., Lim, I., & Song, G. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/9/095003 · Cited by 81
Smart Materials in Structural Health Monitoring, Control and Biomechanics
Soh, C. K., Yang, Y., & Bhalla, S. (2012) · Advanced topics in science and technology in China · doi:10.1007/978-3-642-24463-6 · Cited by 79
One-dimensional convolutional neural network-based damage detection in structural joints
Sharma, S., & Sen, S. (2020) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-020-00434-z · Cited by 78
Zhou, L., Chen, S., Ni, Y., & Choy, W. H. (2021) · Smart Materials and Structures · doi:10.1088/1361-665x/abe292 · Cited by 78
Damage Evaluation of Concrete Column under Impact Load Using a Piezoelectric-Based EMI Technique
Fan, S., Zhao, S., Qi, B., & Kong, Q. (2018) · Sensors · doi:10.3390/s18051591 · Cited by 70
Ensemble Machine Learning-Based Approach for Predicting of FRP–Concrete Interfacial Bonding
Kim, B., Lee, D., Hu, G., Natarajan, Y., Preethaa, K. R. S., & Rathinakumar, A. P. (2022) · Mathematics · doi:10.3390/math10020231 · Cited by 70
He, Y., Chen, H., Liu, D., & Zhang, L. (2021) · Applied Sciences · doi:10.3390/app11199345 · Cited by 68
Region-Based CNN Method with Deformable Modules for Visually Classifying Concrete Cracks
Deng, L., Chu, H.-H., Shi, P., Wang, W., & Kong, X. (2020) · Applied Sciences · doi:10.3390/app10072528 · Cited by 64
Saldarriaga, D. L. C., Alvarez-Montoya, J., Tejada, H. V. M., & Sierra-Pérez, J. (2021) · International Journal of Concrete Structures and Materials · doi:10.1186/s40069-020-00451-8 · Cited by 61
Experimental study of dynamic bond behaviour between corroded steel reinforcement and concrete
Liu, Y., Hao, H., Hao, Y., & Cui, J. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129272 · Cited by 59
Yan, Q., Liao, X., Zhang, C., Zhang, Y., Luo, S., & Zhang, D. (2022) · Measurement · doi:10.1016/j.measurement.2022.111984 · Cited by 57
Fu, B., Chen, S., Liu, X., & Feng, D. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125767 · Cited by 53
Piezoelectric Electro-Mechanical Impedance (EMI) Based Structural Crack Monitoring
Wang, T., Tan, B., Lu, M., Zhang, Z., & Lu, G. (2020) · Applied Sciences · doi:10.3390/app10134648 · Cited by 52
Prediction of FRCM–Concrete Bond Strength with Machine Learning Approach
Kumar, A., Arora, H. C., Kumar, K., Mohammed, M. A., Majumdar, A., Khamaksorn, A., & Thinnukool, O. (2022) · Sustainability · doi:10.3390/su14020845 · Cited by 52
Bond of Concrete to Reinforcing Bars
Clark, A. P. (1949) · ACI Journal Proceedings · doi:10.14359/12050 · Cited by 50
Bond behavior of steel bars embedded in concretes made with natural lightweight aggregates
Alshannag, M. J., & Charif, A. (2017) · Journal of King Saud University - Engineering Sciences · doi:10.1016/j.jksues.2017.05.002 · Cited by 48
Assaad, J. J., Matar, P., & Gergess, A. N. (2019) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2019.1692315 · Cited by 48
Li, X., Li, D., Ren, W., & Zhang, J.-S. (2022) · Sensors · doi:10.3390/s22186825 · Cited by 48
Chen, F., & Jahanshahi, M. R. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2959292 · Cited by 46
Saravanan, T. J., & Chauhan, S. S. (2021) · Measurement · doi:10.1016/j.measurement.2021.110411 · Cited by 46
Bhalla, S., Moharana, S., Talakokula, V., & Kaur, N. (2016) · Wiley eBooks · doi:10.1002/9781119265139 · Cited by 44
Self-citationBouzenad, A. E., Mountassir, M. E., Yaacoubi, S., Dahmene, F., Koabaz, M., Buchheit, L., & Ke, W. (2019) · Inventions · doi:10.3390/inventions4010017 · Cited by 44
A New Structural Health Monitoring Strategy Based on PZT Sensors and Convolutional Neural NetworkPreprint
Oliveira, M. D., Monteiro, A. V., & Filho, J. V. (2018) · Preprints.org · doi:10.20944/preprints201808.0130.v1 · Cited by 43
Neural network model for bond strength of FRP bars in concrete
Concha, N. C. (2022) · Structures · doi:10.1016/j.istruc.2022.04.088 · Cited by 43
Autonomous health assessment of civil infrastructure using deep learning and smart devices
Agyemang, I. O., Zhang, X., Acheampong, D., Adjei-Mensah, I., Kusi, G. A., Mawuli, B. C., & Agbley, B. L. Y. (2022) · Automation in Construction · doi:10.1016/j.autcon.2022.104396 · Cited by 43
Chun, P., Yamane, T., Izumi, S., & Kameda, T. (2019) · Metals · doi:10.3390/met9121259 · Cited by 41
Tensile strength prediction of corroded steel plates by using machine learning approach
Karina, C. N. N., Chun, P. J., & Okubo, K. (2017) · Steel and Composite Structures · doi:10.12989/scs.2017.24.5.635 · Cited by 39
Le, T.-C., Luu, T.-H.-T., Nguyen, H.-P., Nguyen, T.-H., Ho, D.-D., & Huynh, T. (2022) · Energies · doi:10.3390/en15155459 · Cited by 39
Nazar, A. M., Jiao, P., Zhang, Q., Egbe, K.-J. I., & Alavi, A. H. (2021) · IEEE Instrumentation & Measurement Magazine · doi:10.1109/mim.2021.9448251 · Cited by 38
Wang, Z., Chen, D., Zheng, L., Huo, L., & Song, G. (2018) · Sensors · doi:10.3390/s18061782 · Cited by 36
Auto-Regressive Integrated Moving-Average Machine Learning for Damage Identification of Steel Frames
Gao, Y., Mosalam, K. M., Chen, Y., Wang, W., & Chen, Y. (2021) · Applied Sciences · doi:10.3390/app11136084 · Cited by 36
Zhao, H., Wu, D., Zeng, M., Tian, Y. H., & Ling, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.195 · Cited by 35
Leon‐Medina, J. X., Anaya, M., Mariné, N. P., Burgos, D. A. T., & Pozo, F. (2021) · Sensors · doi:10.3390/s21082748 · Cited by 35
Experimental study on the bond behaviour between steel bars and 3D printed concrete
Ding, T., Qin, F., Xiao, J., Chen, X., & Zuo, Z. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104105 · Cited by 35
Oliveira, M. D., & Inman, D. J. (2016) · Applied Soft Computing · doi:10.1016/j.asoc.2016.12.020 · Cited by 32
Bansal, T., Talakokula, V., & Sathujoda, P. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128613 · Cited by 31
Ai, D., Mo, F., Feng, Y., & Zhu, H. (2022) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x221077440 · Cited by 30
Entezami, A., Mariani, S., & Shariatmadar, H. (2022) · Sensors · doi:10.3390/s22041400 · Cited by 30
da Silveira, R. Z. M., Campeiro, L. M., & Baptista, F. G. (2017) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x17689942 · Cited by 28
Choi, S., Tareen, N., Kim, J., Park, S., & Park, I. (2018) · Applied Sciences · doi:10.3390/app8010075 · Cited by 27
Heterogeneous structural responses recovery based on multi-modal deep learning
Du, B., Wu, L., Sun, L., Xu, F., & Li, L. (2022) · Structural Health Monitoring · doi:10.1177/14759217221094499 · Cited by 27
Djemana, M., Hrairi, M., & Jeroudi, Y. A. (2017) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-017-0417-5 · Cited by 26
Ye, Y., Han, J., Liu, H., Rachford, S. M., Parsons, R. L., Dolton, B., & O’Reilly, M. (2022) · Geotextiles and Geomembranes · doi:10.1016/j.geotexmem.2022.01.001 · Cited by 26
Blume, S., Benedens, T., & Schramm, D. H. (2021) · Sensors · doi:10.3390/s21248435 · Cited by 25
Sancak, E., Şimşek, O., & Apay, A. C. (2011) · International Journal of the Physical Sciences · doi:10.5897/ijps11.556 · Cited by 24
Finotti, R. P., Barbosa, F. D. S., Cury, A., & Pimentel, R. L. (2021) · Applied Sciences · doi:10.3390/app112411965 · Cited by 22
Parida, L., & Moharana, S. (2022) · Lecture notes in civil engineering · doi:10.1007/978-981-19-3371-4_33 · Cited by 20
Self-citationEstimation of fatigue life using electromechanical impedance technique
Lim, Y. Y., & Soh, C. K. (2010) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.846902 · Cited by 19
Ye, C., Xu, F., Ullah, F., & Wang, M. (2022) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-021-03870-y · Cited by 19
Machine Learning Models for Predicting Bond Strength of Deformed Bars in Concrete
Degtyarev, V. V. (2022) · ACI Structural Journal · doi:10.14359/51734833 · Cited by 19
Electromechanical impedance based debond localisation in a composite sandwich structure
Sikdar, S., Singh, S. K., Malinowski, P., & Ostachowicz, W. M. (2021) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x211057225 · Cited by 18
Zhang, N., Gu, Q., Wu, Y., & Xue, X. (2022) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0003396 · Cited by 17
Bond strength prediction of the composite rebars in concrete using innovative bio‐inspired models
Alizadeh, F., Naderpour, H., & Mirrashid, M. (2020) · Engineering Reports · doi:10.1002/eng2.12260 · Cited by 16
Bayesian Hyperparameter Optimization with BoTorch, GPyTorch and AxPreprint
Chang, D. T. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1912.05686 · Cited by 14
Wang, W., Shi, P., Deng, L., Chu, H.-H., & Kong, X. (2020) · Materials · doi:10.3390/ma13143226 · Cited by 10
Monitoring of concrete hydration using electromechanical impedance technique
Lim, Y. Y. (2014) · Cross Connect (Southern Cross University) · Cited by 8
Bond strength prediction of spliced GFRP bars in concrete beams using soft computing methods
Shahri, S. F., & Mousavi, S. R. (2021) · Computers and Concrete, an International Journal · doi:10.12989/cac.2021.27.4.305 · Cited by 8
Bond of concrete reinforcing bars
Clark, A. P. (1949) · Journal of research of the National Bureau of Standards · doi:10.6028/jres.043.051 · Cited by 8
Jiang, J., Ye, Z., Feng, Q., & Jiang, J. (2021) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-020-00469-2 · Cited by 7
Gas environment independent temperature sensor via double-metal surface plasmon resonance
Yu, H., Sun, X., Liu, G., Ullah, F., Ban, D., Deng, N., & Qiu, F. (2021) · Optics Express · doi:10.1364/oe.425003 · Cited by 6
Rock Classification Prediction in Tunnel Excavation Using CNN
Kim, H. Y. (2019) · Journal of the Korean Geotechnical Society · doi:10.7843/kgs.2019.35.9.37 · Cited by 5
Research works printed but not linked: 3
- Banerjee, T., Parida, L., and Moharana, S. (2019, January 5–7). Monitoring and Diagnosis of Thermal Expansion of Rails and Rail Joints Using Piezoelectric Sensor for Electro-Mechanical Impedance Technique. Proceedings of the NDE 2019 Conference & Exhibition, Bengaluru, India. NDE-India 2019.
- Moharana, 2012, Numerical investigations of shear lag effect on PZT-structure interaction: Review and application, Curr. Sci., 103, 685
- Ravisankar, 2013, Wireless sensors for structural health monitoring and damage detection techniques, Curr. Sci., 104, 1496
Cited by
Jia, J., & Li, Y. (2023) · Sensors · doi:10.3390/s23218824 · Cited by 182
“…and spatial feature extraction can be solved using a combination of the CNN and RNN methods, such as CNN with GRU [64,109,123], CNN with LSTM [27,178–182], CNN with Auto-encoder and [183], CNN with echo state networks [113], etc. Yang et al. [123] proposed a hierarchical CNN and GRU…”
BackgroundMethodKumar, R., Althaqafi, E., Patro, S. G. K., Šimić, V., Babbar, A., Pamucar, D. S., Singh, S. K., & Verma, A. (2024) · Applied Soft Computing · doi:10.1016/j.asoc.2024.111956 · Cited by 68
A comprehensive review on piezo impedance based multi sensing technique
Parida, L., & Moharana, S. (2023) · Results in Engineering · doi:10.1016/j.rineng.2023.101093 · Cited by 56
Self-citationJena, T., Raj, A. K., Saravanan, T. J., & Bansal, T. (2024) · Measurement · doi:10.1016/j.measurement.2024.115698 · Cited by 38
Maginga, T. J., Masabo, E., Bakunzibake, P., Kim, K. S., & Nsenga, J. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e26647 · Cited by 25
Metadata
- Authors
- Parida, L., Moharana, S., Ferreira, V. M., Giri, S. K., & Ascensão, G.
- Affiliations
- Shiv Nadar University (IN)
- Riscos e Sustentabilidade na Construção (PT)
- Department of CSE, Srinix College of Engineering, Gopalgoan 756003, India
- Corresponding author
- Moharana, Sumedha
- Ascensão, Guilherme
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2022-12-16
- Volume
- 22
- Issue
- 24
- Pages
- 9920
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC9781742
- OpenAlex
- W4312194846
- Cited by
- 58
- References
- 96
- Citations by year
- 2026: 15 · 2025: 17 · 2024: 15 · 2023: 11
- FWCI
- 4.74
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Foundation for Science and Technology (FCT) (FCT/UIDB/ECI/04450/2020)
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Ultrasonics and Acoustic Wave Propagation
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Materials Analysis
- Keywords
- electromechanical impedance, reinforced concrete, pull-out test, piezoelectric sensors, PZT patches, CNN-LSTM hybrid model, structural health monitoring, damage detection, interfacial bonding
- MeSH terms
- Records, Steel, Neural Networks, Computer, Electric Impedance, Memory, Long-Term
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.