A Comprehensive Review of Thermal Energy Storage
Open accessThe DOI matches its Crossref record; 91 of the 91 references it cites were found in a registry or an index.
Abstract
Thermal energy storage (TES) is a technology that stocks thermal energy by heating or cooling a storage medium so that the stored energy can be used at a later time for heating and cooling applications and power generation. TES systems are used particularly in buildings and in industrial processes. This paper is focused on TES technologies that provide a way of valorizing solar heat and reducing the energy demand of buildings. The principles of several energy storage methods and calculation of storage capacities are described. Sensible heat storage technologies, including water tank, underground, and packed-bed storage methods, are briefly reviewed. Additionally, latent-heat storage systems associated with phase-change materials for use in solar heating/cooling of buildings, solar water heating, heat-pump systems, and concentrating solar power plants as well as thermo-chemical storage are discussed. Finally, cool thermal energy storage is also briefly reviewed and outstanding information on the performance and costs of TES systems are included.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Methods of thermal energy storage: ( a ) sensible heat; ( b ) latent heat; ( c ) thermo-chemical reactions [23]. Figure 2. Methods of thermal energy storage: ( a ) sensible heat; ( b ) latent heat; ( c ) thermo-chemical reactions [23].](https://figures.cochat.ai/paper-figures/7fcc1854a1b3442d9de07ae44fa5f198/a-comprehensive-review-of-thermal-energy-storage-figure-2.png)
![Figure 3 A typical system using water tank storage [4]. Figure 3. Atypical system using water tank storage [4].](https://figures.cochat.ai/paper-figures/b284cf36aa4840e3a7fe9dd2a7ad41dc/a-comprehensive-review-of-thermal-energy-storage-figure-3.png)
![Figure 4 Schematic of a solar combisystem with solar collectors and a boiler charging water storage tank [28]. Figure 4. Schematic of a solar combisystem with solar collectors and a boiler charging water storage tank [28].](https://figures.cochat.ai/paper-figures/43d77b00c9be4a6daa000fbeea9e3a72/a-comprehensive-review-of-thermal-energy-storage-figure-4.png)
![Figure 5 Pebble-bed storage system [4]. Figure 5. Pebble-bed storage system [4].](https://figures.cochat.ai/paper-figures/e7af5982bacc41c1ab6b892433600604/a-comprehensive-review-of-thermal-energy-storage-figure-5.png)
![Figure 6 Classification of phase-change materials (PCMs) [11]. Figure 6. Classification of phase-change materials (PCMs) [11].](https://figures.cochat.ai/paper-figures/733e70074c8c4630813d3ca195cac9fa/a-comprehensive-review-of-thermal-energy-storage-figure-6.png)
![Figure 7 Categories of PCM based on melting point [46]. Figure 7. Categories of PCM based on melting point [46].](https://figures.cochat.ai/paper-figures/9a638cb7aaef439399ebf6409ffde4d3/a-comprehensive-review-of-thermal-energy-storage-figure-7.png)

![Figure 9 The maximum energy storage capacity of different 10-mm-thick building materials operating between 18 and 26 °C for 24 h [55]. Figure 9. The maximum energy storage capacity of different 10-mm-thick building materials operating between 18 and 26 ◦ C for 24 h [55].](https://figures.cochat.ai/paper-figures/801d904517d241ed821743c0c03eedb3/a-comprehensive-review-of-thermal-energy-storage-figure-9.png)
![Figure 10 Schematics of a storage Trombe wall [58]. Figure 10. Schematics of a storage Trombe wall [58].](https://figures.cochat.ai/paper-figures/96c4456356d94c3c9e3acee456832c66/a-comprehensive-review-of-thermal-energy-storage-figure-10.png)
![Figure 11 Microencapsulated PCM honeycomb wallboard [60]. Figure 11. Microencapsulated PCM honeycomb wallboard [60]. Figure 11. Microencapsulated PCM honeycomb wallboard [60].](https://figures.cochat.ai/paper-figures/2d915258eb1d40dd97e5a2fa06bd84be/a-comprehensive-review-of-thermal-energy-storage-figure-11.png)
![Figure 12 Clay bricks including PCM macro-capsules [61]. Figure 12. Clay bricks including PCM macro-capsules [61].](https://figures.cochat.ai/paper-figures/cd73eec042104d2fa157106a1f61050c/a-comprehensive-review-of-thermal-energy-storage-figure-12.png)
![Figure 13 Operational mode of the ventilated façade with PCM [64]. Figure 13. Operational mode of the ventilated façade with PCM [64].](https://figures.cochat.ai/paper-figures/9ac7e1aa3fcb4f62a1bc9c39b6cceca6/a-comprehensive-review-of-thermal-energy-storage-figure-13.png)
![Figure 14 Thermal properties of various PCMs [78]. Figure 14. Thermal properties of various PCMs [78].](https://figures.cochat.ai/paper-figures/d3ae6f97540d4762a653cb7764f57ba7/a-comprehensive-review-of-thermal-energy-storage-figure-14.png)
![Figure 15 Schematic of a parabolic trough power plant with two-tank molten salt storage [80]. Figure 15. Schematic of a parabolic trough power plant with two-tank molten salt storage [80].](https://figures.cochat.ai/paper-figures/0520abab24674d9d99215dc7a9f90d6e/a-comprehensive-review-of-thermal-energy-storage-figure-15.png)
![Figure 16 Seasonal adsorption thermal storage system [90]. Figure 16. Seasonal adsorption thermal storage system [90].](https://figures.cochat.ai/paper-figures/a2790d973b6e452ea6dda569333f70d7/a-comprehensive-review-of-thermal-energy-storage-figure-16.png)
![Figure 17 Storage capacity depending on temperature for TES [9]. Figure 17. Storage capacity depending on temperature for TES [9].](https://figures.cochat.ai/paper-figures/c57f0d437af24ed9b55b7875ed9f3424/a-comprehensive-review-of-thermal-energy-storage-figure-17.png)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“They also have the disadvantage of low thermal conductivity, as well as toxicity, corrosivity, instability, and flammability, while also being much more expensive than paraffin [1,2].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Paraffin specifically has the advantages of being non-toxic, chemically stable, compatible with metal containers, and inexpensive.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The main disadvantages of metallic PCMs include a high cost, low specific heat, and low latent heat of fusion per weight unit [1,2].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Fatty acids have a well-defined phase transition and easily reproduced phase change.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Salt hydrates also have a relatively small volume change, high density, and are inexpensive and readily available.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measured
13 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solar Engineering of Thermal Processes
Duffie, J. A., & Beckman, W. A. (2013) · Wiley eBooks · doi:10.1002/9781118671603 · Cited by 6,387
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936 · cited 4×
“Since then, studying thermal energy storage technologies as well as the usability and effects of both sensible and latent heat storage in numerous applications increased, leading to a number of reviews [11–15].”
InfluentialReview on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889 · cited 1×
“The two other possibilities are macro- and micro-encapsulating [51].”
A review of solar collectors and thermal energy storage in solar thermal applications
Tian, Y., & Zhao, C. Y. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.051 · Cited by 1,772 · cited 5×
“A few advantages and disadvantages of organic and inorganic PCMs and their influence on solar cooling application are listed in Table 4 [39].”
InfluentialReview on phase change materials (PCMs) for cold thermal energy storage applications
Oró, E., de Gracia, A., Castell, A., Farid, M. M., & Cabeza, L. F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.03.058 · Cited by 1,144 · cited 1×
“[19] also covered ice storage and air conditioning separately.”
Review of solid–liquid phase change materials and their encapsulation technologies
Su, W., Darkwa, J., & Kokogiannakis, G. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.044 · Cited by 1,037 · cited 1×
“The main characteristic of PCM bulk systems is the need for more extensive heat transfer than that found in non-PCM tanks because the heat storage density of the PCM is higher compared to other storage media.”
Heat transfer characteristics of thermal energy storage system using PCM capsules: A review
Regin, A. F., Solanki, S. C., & Saini, J. S. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.009 · Cited by 945 · cited 2×
“Passive thermal energy systems can effectively enhance the naturally available heat energy sources in order to maintain the comfort conditions in buildings and minimize the use of mechanically assisted heating or cooling systems.”
Liu, M., Saman, W., & Bruno, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.020 · Cited by 864
Sharma, R. K., Ganesan, P., Tyagi, V. V., Metselaar, H. S. C., & Sandaran, S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.01.084 · Cited by 809 · cited 1×
“The different approaches extensively used are inserting fins and using high conductivity particles, metal structures, fibbers on the PCM side, direct contact heat exchangers, or the rolling cylinder method [50].”
Research works printed but not linked: 5
- 4. Sarbu, I.; Sebarchievici, C. Solar Heating and Cooling: Fundamentals, Experiments and Applications; Elsevier: Oxford, UK, 2016.
- 22. Hauer, A. Storage Technology Issues and Opportunities, International Low-Carbon Energy Technology Platform. In Proceedings of the Strategic and Cross-Cutting Workshop "Energy Storage-Issues and Opportunities", Paris, France, 15 February 2011.
- 31. Paksoy, H.; Snijders, A.; Stiles, L. State-of-the-art review of aquifer thermal energy storage systems for heating and cooling buildings. In Proceedings of the Effstock Conference, Stockholm, Sweden, 5-17 June 2009.
- 79. Garg, H.P.; Mullick, S.C.; Bhargava, A.K. Solar Thermal Energy Storage; Springer: Boston, MA, USA, 2013.
- 91. Paksoy, H.O., Ed.; Springer: Amsterdam, The Netherlands, 2007.
Cited by
Items 301–400 of 1,000
Niknam, P. H., Fisher, R. D., Ciappi, L., & Sciacovelli, A. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.123298 · Cited by 33
Progress and prospects of low-grade thermal energy utilization technologies
Liu, G.-K., Ji, D.-X., & Markides, C. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123859 · Cited by 33
Garcia, E. D. S., Quaresma, N., Aemro, Y. B., Coimbra, A. P., & de Almeida, A. T. (2024) · Energy Research & Social Science · doi:10.1016/j.erss.2024.103686 · Cited by 33
Adera, B., Ancha, V. R., Tadiwose, T., & Getahun, E. (2025) · International Journal of Thermofluids · doi:10.1016/j.ijft.2025.101418 · Cited by 37
Salviati, S., Carosio, F., Saracco, G., & Fina, A. (2019) · Nanomaterials · doi:10.3390/nano9030420 · Cited by 33
Wang, X., Djakovic, U., Bao, H., & Torres, J. F. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101025 · Cited by 33
High-temperature heat pumps in climate pathways for selected industry sectors in Switzerland
Obrist, M. D., Kannan, R., McKenna, R., Schmidt, T. J., & Kober, T. (2022) · Energy Policy · doi:10.1016/j.enpol.2022.113383 · Cited by 34
Jain, S., Kumar, K., Rakshit, D., Premachandran, B., & Reddy, K. S. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120923 · Cited by 33
Thermal insulation performance of buildings with phase-change energy-storage wall structures
Zhang, Y., Zhou, C., Liu, M., Li, X., Liu, T., & Liu, Z. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.140749 · Cited by 34
Issa, O. O., & Thirunavukkarasu, V. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111071 · Cited by 32
Effects of cooler shape and position on solidification of phase change material in a cavity
Oztop, H. F., Kıyak, B., Biswas, N., Selımefendıgıl, F., & Coşanay, H. (2024) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2024.105628 · Cited by 34
Padullés, R., Hansen, M. L., Andersen, M. P., Zühlsdorf, B., Jensen, J. K., & Elmegaard, B. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.125703 · Cited by 32
Carrillo‐Berdugo, I., Midgley, S. D., Grau‐Crespo, R., Zorrilla, D., & Navas, J. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c01556 · Cited by 32
Optimal Control Strategies for Seasonal Thermal Energy Storage Systems With Market Interaction
Lago, J., Suryanarayana, G., Sogancioglu, E., & Schutter, B. D. (2020) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2020.3016077 · Cited by 32
“In the context of TES technologies, there are three main categories: sensible heat storage, latent heat storage, and chemical energy storage [14], [15].”
BackgroundSoodoo, N., Palam, K. D. P., Bouzidi, L., & Narine, S. S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104355 · Cited by 34
Clark, R.-J., & Farid, M. M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119145 · Cited by 32
Controlled Latent Heat Phase-Change Microcapsules for Temperature Regulation
Li, C., Fu, J., Huang, F., Zhu, Z., & Si, T. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c06063 · Cited by 32
Moreira, M. T. E. S., Silva, T., Dias-de-Oliveira, J., Neto, F., & Amaral, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121342 · Cited by 33
Alsagri, A. S., Rahbari, H. R., Wang, L., & Arabkoohsar, A. (2024) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2024.04.094 · Cited by 33
Ahmad, A., Memon, S. A., Dang, H., Sarı, A., & Gençel, O. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.125984 · Cited by 33
Energy storage system and applications in power system frequency regulation
Huang, S., Xiong, L., He, Y., Zhou, Y., Gao, F., Huang, W., Jia, Q., & Li, Y. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117506 · Cited by 34
Utilizing phase change materials in thermal energy systems: applications in waste heat recovery
Al-Mahmodi, A. F., Munusamy, Y., Atta, M. R., Suyambulingam, I., Mokaizh, A. A. B., & Muniyadi, M. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.128003 · Cited by 38
Sornek, K., Homa, M., Frigura-Iliasa, F. M., Frigura-Iliasa, M., Jankowski, M., Papis-Frączek, K., Katerla, J., & Janus, J. (2025) · Energies · doi:10.3390/en18215577 · Cited by 31
Cadau, N., Lorenzi, A. D., Gambarotta, A., Morini, M., & Rossi, M. (2019) · Energies · doi:10.3390/en12224275 · Cited by 31
“A detailed analysis and a performance comparison of the existing thermal energy storage systems have been performed by Sarbu and Sebarchievici [12].”
Sanjareh, M. B., Nazari, M. H., Gharehpetian, G. B., & Hosseinian, S. H. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.110850 · Cited by 33
State of the Art of Technologies in Adaptive Dynamic Building Envelopes (ADBEs)
Mohtashami, N., Fuchs, N., Fotopoulou, M. C., Drosatos, P., Streblow, R., Osterhage, T., & Müller, D. (2022) · Energies · doi:10.3390/en15030829 · Cited by 31
“This category is comprised of sensible heat storage technologies [58], such as water tanks, and latent heat storage technologies, such as PCM storage units [59,60].”
BackgroundZhang, X., Ameli, H., Dong, Z., Vecchi, A., Gallego‐Schmid, A., Štrbac, G., & Sciacovelli, A. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104126 · Cited by 32
Liu, X., Wang, H., Liu, X., Yang, F., Guan, L., Sani, S., Sun, C., & Wu, Y. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.03.137 · Cited by 31
Ultrahigh‐Porosity MgO Microparticles for Heat‐Energy Storage
Kim, Y., Dong, X., Chae, S., Asghar, G., Choi, S. W., Kim, B. J., Choi, J., & Yu, H. K. (2022) · Advanced Materials · doi:10.1002/adma.202204775 · Cited by 31
Influences of latent heat storage heat sink integrated with solar dryer to enhance drying period
Divyangkumar, N., Jain, S. K., & Panwar, N. L. (2022) · Energy Nexus · doi:10.1016/j.nexus.2022.100160 · Cited by 31
A scientometrics review of solar thermal energy storage (STES) during the past forty years
Ghalambaz, M., Sheremet, M. А., Fauzi, M. A., Fteiti, M. A., & Younis, O. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.107266 · Cited by 33
Izadi, M., Alshuraiaan, B., Hajjar, A., Sheremet, M. А., & Hamida, M. B. B. (2023) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2023.108404 · Cited by 31
Investigation of latent heat storage system using graphite micro-particle enhancement
Dhandayuthabani, M., Jegadheeswaran, S., Vijayan, V., & Antony, A. G. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08625-7 · Cited by 30
Thermally-pressurized sorption heat storage cycle with low charging temperature
Mehari, A., Xu, Z., & Wang, R. Z. (2019) · Energy · doi:10.1016/j.energy.2019.116304 · Cited by 30
Pakalka, S., Valančius, K., & Streckienė, G. (2021) · Energies · doi:10.3390/en14030716 · Cited by 32
“The overview of heat storage methods is presented in [1].”
MethodChuttar, A., Thyagarajan, A., & Banerjee, D. (2021) · Journal of Energy Resources Technology · doi:10.1115/1.4051048 · Cited by 30
Wadee, A., Achanta, P., Walker, P., McCullen, N., & Ferrándiz-Mas, V. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133159 · Cited by 30
Sánchez, A. J., Gallego, A. J., Escaño, J. M., & Camacho, E. F. (2018) · Solar Energy · doi:10.1016/j.solener.2018.09.044 · Cited by 30
Chakrabarty, A., & Teramoto, Y. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c00687 · Cited by 30
Sanjareh, M. B., Nazari, M. H., & Hosseinian, S. H. (2020) · International Journal of Energy Research · doi:10.1002/er.6160 · Cited by 32
Enhancement of conventional concrete mix designs for sensible thermal energy storage applications
Wang, S., Abdulridha, A., Naito, C. J., Quiel, S. E., Suleiman, M., Romero, C. E., & Neti, S. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106735 · Cited by 32
Stabilization of low-cost phase change materials for thermal energy storage applications
Akamo, D. O., Kumar, N., Li, Y., Pekol, C., Li, K., Goswami, M., Hirschey, J., LaClair, T. J., Keffer, D. J., Rios, O. R., et al. (2023) · iScience · doi:10.1016/j.isci.2023.107175 · Cited by 32
“In addition, PCMs have a large volumetric energy storage capacity (ESC), making them ideal for a variety of applications, including those in buildings, industrial waste recovery, car heat management, thermoelectric power production, and diurnal or seasonal energy storage.(4) In buildings, the use of PCMs can smooth te…”
BackgroundMa, H., Sun, Q., Chen, L., Chen, Q., Zhao, T., He, K., Xu, F., Min, Y., Wang, S., & Zhou, G. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113709 · Cited by 31
Wang, D., Sun, Z., Xu, Q., Tian, R., Wei, H., & Shen, J. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118888 · Cited by 29
Sârbu, I., & Sebarchievici, C. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-811662-3.00004-9 · Cited by 32
Self-citationNeopentyl Glycol as Active Supporting Media in Shape-Stabilized PCMs
Serrano, Á., Dauvergne, J., Doppiu, S., & del Barrio, E. P. (2019) · Materials · doi:10.3390/ma12193169 · Cited by 29
“Indeed, PCMs are able to absorb or release great amounts of energy in the form of latent heat during phase transitions at nearly constant temperature [1].”
BackgroundImproving thermal performance of groups of energy screw piles with phase change materials
Neto, L. A. B., Fei, W., & Narsilio, G. A. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121874 · Cited by 28
Sârbu, I., Dorca, A., & Mirza, M. (2024) · Sustainable Cities and Society · doi:10.1016/j.scs.2024.105897 · Cited by 29
Romanov, D., Chakraborty, I., & Höller, S. (2025) · Energy Conversion and Management · doi:10.1016/j.enconman.2025.119856 · Cited by 30
Kosman, W., & Rusin, A. M. (2020) · Energies · doi:10.3390/en13092222 · Cited by 28
“Reference [2] is focused on thermal energy storage technologies that provide a way of valorizing solar heat and reducing the energy demand of buildings.”
BackgroundDouadi, O., Ravi, R., Faqir, M., & Essadiqi, E. (2022) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2022.100309 · Cited by 73
Ameen, M. T., Ma, Z., Smallbone, A. J., Norman, R. A., & Roskilly, A. P. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116648 · Cited by 28
Yu, S., Liu, X., Li, R., Yin, Z., Chen, Z., Han, F., & Li, S. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110375 · Cited by 28
Energy Storage in Urban Areas: The Role of Energy Storage Facilities, a Review
Anastasovski, A., Andreucci, M. B., Kádár, J., & Paoli, M. D. (2024) · Energies · doi:10.3390/en17051117 · Cited by 32
A review of district energy technology with subsurface thermal storage integration
Fry, N., Adebayo, P., Tian, R., Shor, R., & Mwesigye, A. (2024) · Geothermal Energy · doi:10.1186/s40517-024-00308-3 · Cited by 29
“All SHS UTES capacity relies on the fundamental equation relating heat, a heat-containing medium, and heat capacity, given by Sarbu and Sebarchievici (2018): where Q s is the quantity of heat stored in joules, m is the mass of heat storage in kg, c p is the specific heat capacity in J/(kg*K), T i…”
BackgroundPhukaokaew, W., Suksri, A., Punyawudho, K., & Wongwuttanasatian, T. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e41054 · Cited by 27
“However, the fact that they freeze at low temperatures and are difficult to handle at high ones hinders their performance [14].”
Śliwa, T., Sojczyńska, A., Rosen, M. A., & Kowalski, T. (2018) · Geothermics · doi:10.1016/j.geothermics.2018.12.005 · Cited by 27
Wang, H., Wang, J., Zailin, P., Meng, X., Sun, C., Yuan, G., & Zhu, S. (2020) · Sustainability · doi:10.3390/su12156154 · Cited by 29
“On the other hand, the energy storage system is a solution to increase the share of self-consumption in a developed market which is conducive to the economic feasibility of PV systems, and it can lead to less pollution of the environment and lower carbon dioxide (CO2) emissions [11,12].”
BackgroundEmrani-Rahaghi, P., Hashemi‐Dezaki, H., & Hosseini, S. A. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103481 · Cited by 27
Ghazaie, S. H., Sadeghi, K., Chebac, R., Sokolova, E., Fedorovich, E., Cammi, A., Ricotti, M. E., & Shirani, A. S. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101838 · Cited by 40
Diffusion Absorption Refrigeration Systems: An Overview of Thermal Mechanisms and Models
Bisulandu, B.-J. R. M., Mansouri, R., & Ilinca, A. (2023) · Energies · doi:10.3390/en16093610 · Cited by 33
“Its low cost and low toxicity of materials make this technology widely spread [136,147]; • Latent heat storage systems.”
BackgroundParajuli, S., Bhattarai, T. N., Gorjian, S., Vithanage, M. S., & Paudel, S. R. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.121270 · Cited by 28
Mathematical Modeling of Solar Energy based Thermal Energy Storage for House Heating in Winter
Soni, N., Sharma, D., Rahman, M. M., Hanmaiahgari, P. R., & Reddy, V. M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.102203 · Cited by 27
Thermal Energy Storage in Energy Communities: A Perspective Overview through a Bibliometric Analysis
Brunelli, L., Borri, E., Pisello, A. L., Nicolini, A., Mateu, C., & Cabeza, L. F. (2024) · Sustainability · doi:10.3390/su16145895 · Cited by 27
Energy: An Overview of Type, Form, Storage, Advantages, Efficiency, and Their Impact
Mekuye, B., Mebratie, G., Abera, B., Yibeltal, A., Lake, A., & Tefera, A. (2024) · Energy Science & Engineering · doi:10.1002/ese3.1937 · Cited by 29
“It has advantages in heat storage capacity, operating costs, safety, and power generation [19, 231, 232].”
Concentrated Solar Thermal Power Technology and Its Thermal Applications
Wu, C., Zhao, Y., Li, W., Fan, J., Xu, H., Ling, Z., Yuan, D., & Zeng, X. (2025) · Energies · doi:10.3390/en18082120 · Cited by 32
“This progress in storage, coupled with incremental improvements in turbines and heat transfer fluids (e.g., adoption of supercritical CO 2 cycles), has steadily increased the overall efficiency and capacity factor of CST plants [8].”
Naikwadi, A. T., Samui, A. B., & Mahanwar, P. A. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02808-3 · Cited by 26
“Latent heat storage units in PCMs store and release thermal energy during phase transition [3].”
BackgroundThermal Behaviour of Nanocomposite Phase Change Material for Solar Thermal Applications
Al-Mahmodi, A. F., Afolabi, L. O., Awadh, M. G., Batcha, M. F. M., Zamani, N., Isa, N. M., & Didane, D. H. (2021) · ARTS Bulletin : · doi:10.37934/arfmts.88.2.133146 · Cited by 27
Brandt, M., Woods, J., & Tabares-Velasco, P. C. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104216 · Cited by 27
Raut, D., Tiwari, A. K., & Kalamkar, V. R. (2022) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-022-03740-3 · Cited by 30
Romanos, P., Kindi, A. A. A., Pantaleo, A. M., & Markides, C. N. (2022) · e-Prime - Advances in Electrical Engineering Electronics and Energy · doi:10.1016/j.prime.2021.100027 · Cited by 26
Impact of policies on residential multi-energy systems for consumers and prosumers
Brodnicke, L., Gabrielli, P., & Sansavini, G. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.121276 · Cited by 27
Energy efficient refrigeration system using latent heat storage, PCM
Harun‐Or‐Rashid, M., Hasan, M. T., Alam, T. B., & Hossain, S. (2024) · International Journal of Thermofluids · doi:10.1016/j.ijft.2024.100717 · Cited by 26
Adaptive incremental state space MPC for collector defocusing of a parabolic trough plant
Sánchez, A. J., Gallego, A. J., Escaño, J. M., & Camacho, E. F. (2019) · Solar Energy · doi:10.1016/j.solener.2019.03.094 · Cited by 26
Qu, Y., Liang, J., Ye, F., Li, C., Fan, X., & Song, Q. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202510818 · Cited by 30
Garofalo, L., Vitiello, F. V., Montagnaro, F., Bürgmayr, H., & Winter, F. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c01220 · Cited by 29
Quirosa, G., García, M. T., Soltero, V. M., & Chacartegui, R. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119052 · Cited by 28
Nebel, A., Cantor, J., Salim, S., Salih, A., & Patel, D. (2022) · Sustainability · doi:10.3390/su141610379 · Cited by 25
An overview of underground energy-related product storage and sequestration
Schultz, R. A., Heinemann, N., Horváth, B., Wickens, J., Miocic, J. M., Babarinde, O., Cao, W., Capuano, P., Dewers, T. A., Dusseault, M. B., et al. (2022) · Geological Society London Special Publications · doi:10.1144/sp528-2022-160 · Cited by 27
Oztop, H. F., Coşanay, H., Biswas, N., & Selımefendıgıl, F. (2023) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-023-08463-8 · Cited by 25
“To address this issue, several researchers have paid their attention to improving the thermal performance of PCM through the enhancement of thermal conductivity and other different means (such as fins, nanoparticles, metal foams, and geometry modification) [12, 13].”
Smith, J. L., Weinberger, P., & Werner, A. T. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.110003 · Cited by 28
Thermal balance of large scale parabolic trough plants: A case study
Sánchez, A. J., Gallego, A. J., Escaño, J. M., & Camacho, E. F. (2019) · Solar Energy · doi:10.1016/j.solener.2019.08.001 · Cited by 25
Narula, K., Filho, F. D. O., Chambers, J., & Patel, M. K. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101810 · Cited by 25
Hwang, H., Lim, Y., & Choi, W. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118652 · Cited by 24
Empowering modern power systems with thermal energy storage in China: A comprehensive review
Jia, T., Shuai, Y., Wang, F., Zhang, H., Yang, D., Geng, B., Li, Q., Wu, Q., & Xu, Y. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2026.116937 · Cited by 25
Akamatsu, K., Ogawa, M., Katayama, R., Yonemura, K., & Nakao, S. (2019) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2019.01.076 · Cited by 24
Durán-Olivencia, F. J., Espin, M. J., & Valverde, J. M. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.11.125 · Cited by 24
A review on passive and active solar still using phase change materials
Negi, P., Dobriyal, R., Singh, D. B., & Badhotiya, G. K. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.12.996 · Cited by 24
Integration and Optimal Control of MicroCSP with Building HVAC Systems: Review and Future Directions
Toub, M., Reddy, C. R., Robinett, R. D., & Shahbakhti, M. (2021) · Energies · doi:10.3390/en14030730 · Cited by 24
“Sensible heat systems can store energy for days, even months if well insulated, and have an efficiency that ranges from 50% to 90% [75].”
BackgroundPuschnigg, S., Lindorfer, J., Moser, S., & Kienberger, T. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102344 · Cited by 25
TES Nanoemulsions: A Review of Thermophysical Properties and Their Impact on System Design
Iacob-Tudose, E. T., Mămăligă, I., & Iosub, A. V. (2021) · Nanomaterials · doi:10.3390/nano11123415 · Cited by 27
Review on Water and Energy Integration in Process Industry: Water-Heat Nexus
Oliveira, M. C., Iten, M., & Matos, H. A. (2022) · Sustainability · doi:10.3390/su14137954 · Cited by 28
Lu, S., Zheng, J., Wang, R., & Zhu, J. (2023) · Solar Energy · doi:10.1016/j.solener.2023.112100 · Cited by 26
Optimization of solar thermal systems with a thermocline storage tank
Jadhav, I. B., Bose, M., & Bandyopadhyay, S. K. (2020) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-020-01849-4 · Cited by 24
Shao, Y., Soh, K. Y., Wan, Y., Kumja, M., Zaw, K., Islam, M. R., & Chua, K. J. (2020) · Energy · doi:10.1016/j.energy.2020.117781 · Cited by 24
Ajithkumar, A., & Kumar, P. G. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115952 · Cited by 23
Mengesha, W. G., & Nagessar, K. (2025) · Discover Materials · doi:10.1007/s43939-025-00305-8 · Cited by 23
Palacios, A., Krabben, Y., Linder, E., Thamm, A., Arpagaus, C., Paranjape, S. S., Bless, F., Carbonell, D., Schuetz, P., Worlitschek, J., et al. (2025) · Sustainability · doi:10.3390/su17219693 · Cited by 24
Tahir, M. F., Chen, H., Javed, M. S., Jameel, I., Khan, A., & Adnan, S. (2019) · Energies · doi:10.3390/en12112083 · Cited by 23
“Further, low investment costs also decrease the total annual costs [19].”
BackgroundDaniarta, S., Nemś, M., Kolasiński, P., & Pomorski, M. (2022) · Energies · doi:10.3390/en15030956 · Cited by 27
“Sensible heat, latent heat, and chemical processes are some mechanisms that might be used in TES [13,15,18].”
Background
Metadata
- Authors
- Sarbu, I., & Sebarchievici, C.
- Affiliations
- Department of Building Services Engineering, Polytechnic University of Timisoara, Piata Victoriei, No. 2A, 300006 Timisoara, Romania
- ORCID
- Sarbu, Ioan
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2018-01-14
- Volume
- 10
- Issue
- 1
- Pages
- 191
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2786385826
- Cited by
- 1,311
- References
- 90
- Citations by year
- 2026: 159 · 2025: 215 · 2024: 177 · 2023: 176 · 2022: 197 · 2021: 174 · 2020: 122 · 2019: 67 · 2018: 23
- FWCI
- 61.67
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
- Keywords
- thermal energy storage, solar heat, building energy demand, sensible heat storage, latent heat storage, phase change materials, underground thermal energy storage, packed bed storage, solar water heating, heat pumps, concentrated solar power, storage capacity calculation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.