A Comprehensive Review of Thermal Energy Storage
Open accessThe DOI matches its Crossref record; 91 of the 91 references it cites were found in a registry or an index.
Abstract
Thermal energy storage (TES) is a technology that stocks thermal energy by heating or cooling a storage medium so that the stored energy can be used at a later time for heating and cooling applications and power generation. TES systems are used particularly in buildings and in industrial processes. This paper is focused on TES technologies that provide a way of valorizing solar heat and reducing the energy demand of buildings. The principles of several energy storage methods and calculation of storage capacities are described. Sensible heat storage technologies, including water tank, underground, and packed-bed storage methods, are briefly reviewed. Additionally, latent-heat storage systems associated with phase-change materials for use in solar heating/cooling of buildings, solar water heating, heat-pump systems, and concentrating solar power plants as well as thermo-chemical storage are discussed. Finally, cool thermal energy storage is also briefly reviewed and outstanding information on the performance and costs of TES systems are included.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Methods of thermal energy storage: ( a ) sensible heat; ( b ) latent heat; ( c ) thermo-chemical reactions [23]. Figure 2. Methods of thermal energy storage: ( a ) sensible heat; ( b ) latent heat; ( c ) thermo-chemical reactions [23].](https://figures.cochat.ai/paper-figures/7fcc1854a1b3442d9de07ae44fa5f198/a-comprehensive-review-of-thermal-energy-storage-figure-2.png)
![Figure 3 A typical system using water tank storage [4]. Figure 3. Atypical system using water tank storage [4].](https://figures.cochat.ai/paper-figures/b284cf36aa4840e3a7fe9dd2a7ad41dc/a-comprehensive-review-of-thermal-energy-storage-figure-3.png)
![Figure 4 Schematic of a solar combisystem with solar collectors and a boiler charging water storage tank [28]. Figure 4. Schematic of a solar combisystem with solar collectors and a boiler charging water storage tank [28].](https://figures.cochat.ai/paper-figures/43d77b00c9be4a6daa000fbeea9e3a72/a-comprehensive-review-of-thermal-energy-storage-figure-4.png)
![Figure 5 Pebble-bed storage system [4]. Figure 5. Pebble-bed storage system [4].](https://figures.cochat.ai/paper-figures/e7af5982bacc41c1ab6b892433600604/a-comprehensive-review-of-thermal-energy-storage-figure-5.png)
![Figure 6 Classification of phase-change materials (PCMs) [11]. Figure 6. Classification of phase-change materials (PCMs) [11].](https://figures.cochat.ai/paper-figures/733e70074c8c4630813d3ca195cac9fa/a-comprehensive-review-of-thermal-energy-storage-figure-6.png)
![Figure 7 Categories of PCM based on melting point [46]. Figure 7. Categories of PCM based on melting point [46].](https://figures.cochat.ai/paper-figures/9a638cb7aaef439399ebf6409ffde4d3/a-comprehensive-review-of-thermal-energy-storage-figure-7.png)

![Figure 9 The maximum energy storage capacity of different 10-mm-thick building materials operating between 18 and 26 °C for 24 h [55]. Figure 9. The maximum energy storage capacity of different 10-mm-thick building materials operating between 18 and 26 ◦ C for 24 h [55].](https://figures.cochat.ai/paper-figures/801d904517d241ed821743c0c03eedb3/a-comprehensive-review-of-thermal-energy-storage-figure-9.png)
![Figure 10 Schematics of a storage Trombe wall [58]. Figure 10. Schematics of a storage Trombe wall [58].](https://figures.cochat.ai/paper-figures/96c4456356d94c3c9e3acee456832c66/a-comprehensive-review-of-thermal-energy-storage-figure-10.png)
![Figure 11 Microencapsulated PCM honeycomb wallboard [60]. Figure 11. Microencapsulated PCM honeycomb wallboard [60]. Figure 11. Microencapsulated PCM honeycomb wallboard [60].](https://figures.cochat.ai/paper-figures/2d915258eb1d40dd97e5a2fa06bd84be/a-comprehensive-review-of-thermal-energy-storage-figure-11.png)
![Figure 12 Clay bricks including PCM macro-capsules [61]. Figure 12. Clay bricks including PCM macro-capsules [61].](https://figures.cochat.ai/paper-figures/cd73eec042104d2fa157106a1f61050c/a-comprehensive-review-of-thermal-energy-storage-figure-12.png)
![Figure 13 Operational mode of the ventilated façade with PCM [64]. Figure 13. Operational mode of the ventilated façade with PCM [64].](https://figures.cochat.ai/paper-figures/9ac7e1aa3fcb4f62a1bc9c39b6cceca6/a-comprehensive-review-of-thermal-energy-storage-figure-13.png)
![Figure 14 Thermal properties of various PCMs [78]. Figure 14. Thermal properties of various PCMs [78].](https://figures.cochat.ai/paper-figures/d3ae6f97540d4762a653cb7764f57ba7/a-comprehensive-review-of-thermal-energy-storage-figure-14.png)
![Figure 15 Schematic of a parabolic trough power plant with two-tank molten salt storage [80]. Figure 15. Schematic of a parabolic trough power plant with two-tank molten salt storage [80].](https://figures.cochat.ai/paper-figures/0520abab24674d9d99215dc7a9f90d6e/a-comprehensive-review-of-thermal-energy-storage-figure-15.png)
![Figure 16 Seasonal adsorption thermal storage system [90]. Figure 16. Seasonal adsorption thermal storage system [90].](https://figures.cochat.ai/paper-figures/a2790d973b6e452ea6dda569333f70d7/a-comprehensive-review-of-thermal-energy-storage-figure-16.png)
![Figure 17 Storage capacity depending on temperature for TES [9]. Figure 17. Storage capacity depending on temperature for TES [9].](https://figures.cochat.ai/paper-figures/c57f0d437af24ed9b55b7875ed9f3424/a-comprehensive-review-of-thermal-energy-storage-figure-17.png)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“They also have the disadvantage of low thermal conductivity, as well as toxicity, corrosivity, instability, and flammability, while also being much more expensive than paraffin [1,2].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Paraffin specifically has the advantages of being non-toxic, chemically stable, compatible with metal containers, and inexpensive.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The main disadvantages of metallic PCMs include a high cost, low specific heat, and low latent heat of fusion per weight unit [1,2].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Fatty acids have a well-defined phase transition and easily reproduced phase change.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Salt hydrates also have a relatively small volume change, high density, and are inexpensive and readily available.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [1]
Experimental — accuracy not yet measured
13 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solar Engineering of Thermal Processes
Duffie, J. A., & Beckman, W. A. (2013) · Wiley eBooks · doi:10.1002/9781118671603 · Cited by 6,387
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936 · cited 4×
“Since then, studying thermal energy storage technologies as well as the usability and effects of both sensible and latent heat storage in numerous applications increased, leading to a number of reviews [11–15].”
InfluentialReview on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889 · cited 1×
“The two other possibilities are macro- and micro-encapsulating [51].”
A review of solar collectors and thermal energy storage in solar thermal applications
Tian, Y., & Zhao, C. Y. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.051 · Cited by 1,772 · cited 5×
“A few advantages and disadvantages of organic and inorganic PCMs and their influence on solar cooling application are listed in Table 4 [39].”
InfluentialReview on phase change materials (PCMs) for cold thermal energy storage applications
Oró, E., de Gracia, A., Castell, A., Farid, M. M., & Cabeza, L. F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.03.058 · Cited by 1,144 · cited 1×
“[19] also covered ice storage and air conditioning separately.”
Review of solid–liquid phase change materials and their encapsulation technologies
Su, W., Darkwa, J., & Kokogiannakis, G. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.044 · Cited by 1,037 · cited 1×
“The main characteristic of PCM bulk systems is the need for more extensive heat transfer than that found in non-PCM tanks because the heat storage density of the PCM is higher compared to other storage media.”
Heat transfer characteristics of thermal energy storage system using PCM capsules: A review
Regin, A. F., Solanki, S. C., & Saini, J. S. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.009 · Cited by 945 · cited 2×
“Passive thermal energy systems can effectively enhance the naturally available heat energy sources in order to maintain the comfort conditions in buildings and minimize the use of mechanically assisted heating or cooling systems.”
Liu, M., Saman, W., & Bruno, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.020 · Cited by 864
Sharma, R. K., Ganesan, P., Tyagi, V. V., Metselaar, H. S. C., & Sandaran, S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.01.084 · Cited by 809 · cited 1×
“The different approaches extensively used are inserting fins and using high conductivity particles, metal structures, fibbers on the PCM side, direct contact heat exchangers, or the rolling cylinder method [50].”
Research works printed but not linked: 5
- 4. Sarbu, I.; Sebarchievici, C. Solar Heating and Cooling: Fundamentals, Experiments and Applications; Elsevier: Oxford, UK, 2016.
- 22. Hauer, A. Storage Technology Issues and Opportunities, International Low-Carbon Energy Technology Platform. In Proceedings of the Strategic and Cross-Cutting Workshop "Energy Storage-Issues and Opportunities", Paris, France, 15 February 2011.
- 31. Paksoy, H.; Snijders, A.; Stiles, L. State-of-the-art review of aquifer thermal energy storage systems for heating and cooling buildings. In Proceedings of the Effstock Conference, Stockholm, Sweden, 5-17 June 2009.
- 79. Garg, H.P.; Mullick, S.C.; Bhargava, A.K. Solar Thermal Energy Storage; Springer: Boston, MA, USA, 2013.
- 91. Paksoy, H.O., Ed.; Springer: Amsterdam, The Netherlands, 2007.
Cited by
Items 801–900 of 1,000
Thermodynamics of crystal formation and growth in a sessile droplet
Zhu, H., Zhang, Y., Lu, H., Feng, J., Yan, Q., Brodský, J., Gablech, I., & Neužil, P. (2024) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2024.101971 · Cited by 5
Abera, M. M., Ancha, V. R., Zeru, B. A., Sundar, L. S., Mouli, K. V. V. C., & Sangaraju, S. (2024) · Frontiers in Heat and Mass Transfer · doi:10.32604/fhmt.2024.049525 · Cited by 7
Han, J., & Chung, B.-J. (2024) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-024-0737-1 · Cited by 5
“Consequently, there has been an increased interest in energy storage technologies with the growing penetration of renewables [1–3].”
On the possibility of achieving high solar fractions for space heating in temperate climates
Kupiec, K., & Pater, S. (2025) · Solar Energy · doi:10.1016/j.solener.2025.113789 · Cited by 5
CONSTRUCTION CALCULATION OF MOBILE HEAT STORAGE
Demchenko, V. G., Gron, S. S., & Pogorelova, N. D. (2019) · Teplofìzika ta teploenergetika · doi:10.31472/ttpe.4.2019.5 · Cited by 5
Energy storage for sustainable desalination and renewable energy integration
Gude, V. G. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-821920-1.00008-x · Cited by 5
Takasu, H., Kaneko, J., Yoshida, S., Harada, T., & Kato, Y. (2022) · ISIJ International · doi:10.2355/isijinternational.isijint-2022-136 · Cited by 5
Szécsényi, K. M., & Menczel, J. D. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-811347-9.00001-1 · Cited by 5
Energy Transition: Challenges and Opportunities for the Oil & Gas Industry
Saraji, S., & Akindipe, D. (2023) · Lecture notes in energy · doi:10.1007/978-3-031-30697-6_1 · Cited by 5
Vithalani, G., Bell, S., Will, G. D., Clegg, R., Steinberg, T., & Haque, R. (2023) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2023.112658 · Cited by 5
Gürbüz, E. Y., Moussaoui, H., Kusun, B., & Tuncer, A. D. (2023) · Heat Transfer Research · doi:10.1615/heattransres.2023051462 · Cited by 5
A theoretical analysis of waste heat recovery technologies
Malinauskaitė, J., & Jouhara, H. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18454-3.00001-1 · Cited by 6
Residential Micro-CHP system with integrated phase change material thermal energy storage
Khader, M. A., Ghavami, M., Al-Zaili, J., & Sayma, A. I. (2024) · Energy · doi:10.1016/j.energy.2024.131606 · Cited by 5
“These materials utilise the latent heat stored during the transition from one phase to another which enables a greater amount of heat to be stored or ejected per unit volume [18].”
Ito, Y., Habata, Y., Kuramochi, H., Kusuda, E., Hu, K., 増田, 秀., Fujita, J., Nagata, Y., Watanabe, M. M., & Isdepsky, A. (2019) · Advanced Sustainable Systems · doi:10.1002/adsu.201900045 · Cited by 5
Conversion of A medium heavy heating oil tank into A heat storage tank
Kocijel, L., Mrzljak, V., & Glažar, V. (2019) · Heat and Mass Transfer · doi:10.1007/s00231-019-02751-6 · Cited by 5
Energy consumption and environmental consequences
Dehghani-Sanij, A., & Bahadori, M. N. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822275-1.00012-6 · Cited by 5
Rabbi, J., Asif, M., & Bibi, W. (2021) · Energy Storage · doi:10.1002/est2.273 · Cited by 5
Laboratory Testing of Small-Scale Active Solar Façade Module
Narbuts, J., Vanaga, R., Freimanis, R., & Blumberga, A. (2021) · Environmental and Climate Technologies · doi:10.2478/rtuect-2021-0033 · Cited by 5
“Two key conditions in the selection method are a high heat of fusion and a specific melting/solidification temperature [21].”
MethodLi, Y.-F., Xie, Y.-X., Syu, J.-Y., Huang, C.-H., Tsai, H.-H., Cheng, T., Chen, Y.-C., & Lee, W. (2021) · Sustainability · doi:10.3390/su14010164 · Cited by 5
Review on the Energy Storage Technologies with the Focus on Multi‐Energy Systems
Vahid‐Ghavidel, M., Javadi, S., Gough, M. B., Javadi, M. S., Santos, S. F. F., Shafie‐khah, M., & Catalào, J. P. S. (2022) · Wiley eBooks · doi:10.1002/9783527833634.ch5 · Cited by 5
Optimal nuclear trigeneration system considering life cycle costing
Jamaluddin, K., Alwi, S. R. W., Manan, Z. A., Hamzah, K., Klemeš, J. J., & Zailan, R. B. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133399 · Cited by 5
Larin, S. V., Makarova, V. V., Gorbacheva, S. N., Yakubov, M. R., Antonov, S. V., Borzdun, N. I., Glova, A. D., Nazarychev, V. M., Gurtovenko, A. A., & Lyulin, S. V. (2022) · The Journal of Chemical Physics · doi:10.1063/5.0122116 · Cited by 5
Azam, S. R. S., Darlis, N., Mustaffa, N., Azahar, M. A. R., Sadun, A. S., Hassan, O. A., Taib, I., Mustafa, K. N., & Hashim, M. M. (2023) · CFD letters · doi:10.37934/cfdl.15.2.115 · Cited by 5
Zhang, J., Zhang, N., Zhang, Z., Xu, K., Yuan, Y., & Memon, S. A. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.116122 · Cited by 4
Wiegandt, A., Langer, F., & Schwenzel, J. (2025) · Energy Technology · doi:10.1002/ente.202500457 · Cited by 5
Anbazhaghan, N., Jayaprabakar, J., Harish, V. I., & Sivaraj, D. (2025) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.70147 · Cited by 4
Sand-Based Thermal Storage System for Human-Powered Energy Generation: A Review
Ding, Q., Zeng, L., Zeng, Y., Song, C., Lei, L., & Cui, W. (2025) · Energies · doi:10.3390/en18225869 · Cited by 4
Delfiya, D. S. A., Ashraf, P. M., Murali, S., & Neethu, K. C. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.122019 · Cited by 4
Моржухин, А. М., Тестов, Д. С., & Моржухина, С. В. (2020) · Materials science forum · doi:10.4028/www.scientific.net/msf.989.165 · Cited by 6
Buildings sector from a sustainable carbon constrained energy generation perspective
Cubukcu, N., & Tarı, İ. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.111865 · Cited by 4
Mennel, S., Villasmil, W., Fischer, L., & Tuohy, P. G. (2023) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2600/5/052002 · Cited by 4
Moreira, M. T. E. S., Silva, T., Dias-de-Oliveira, J., Amaral, C., & da Silva, F. N. (2024) · Next Materials · doi:10.1016/j.nxmate.2024.100461 · Cited by 5
Tourn, B. A., Strunz, C., Hostos, J. C. Á., Stark, C., & Klemczak, B. (2025) · International Journal of Thermophysics · doi:10.1007/s10765-025-03537-1 · Cited by 4
“TES systems store and release thermal energy through either active or passive mechanisms [6, 7].”
Coaxially 3D-printed ceramic scaffolds for thermal energy storage applications
Moreno-Sanabria, L., Díaz-Herrezuelo, I., Osendi, M. I., Belmonte, M., & Miranzo, P. (2025) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2025.117531 · Cited by 4
Nunes, L. J. R. (2025) · Energies · doi:10.3390/en18164235 · Cited by 5
Study On Future of Solar Thermal Storage System Using Concentrated Solar Power
Singh, P. K., Kumar, A., Mishra, P. K., & Sethi, V. K. (2019) · 2019 International Conference on Power Electronics, Control and Automation (ICPECA) · doi:10.1109/icpeca47973.2019.8975636 · Cited by 4
Roumpedakis, T. C., Leontaritis, A.-D., Vlachogiannis, P., Varvagiannis, E., Charalampidis, A., & Karellas, S. (2023) · Thermo · doi:10.3390/thermo3040038 · Cited by 4
Open-Source Models for Sand-Based Thermal Energy Storage in Heating Applications
Hinkelman, K., Milner, D., & Zuo, W. (2023) · Linköping electronic conference proceedings · doi:10.3384/ecp204627 · Cited by 4
“Water, molten salt, and phase-change materials are typically used for building TES heating applications (Sarbu and Sebarchievici 2018).”
BackgroundBerent, H. K., Cihan, E., & Demir, H. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.115708 · Cited by 4
Ishola, F. A., Babalola, P. O., Olatunji, O. O., Ogunrinola, I., Ayo, O. O., & Akinlabi, S. A. (2020) · E3S Web of Conferences · doi:10.1051/e3sconf/202015202008 · Cited by 4
Thermal and Thermochemical Energy Conversion and Storage
Kildahl, H., Jiang, Z., Palacios, A., Song, C. L., Zhang, X., Zheng, H., Cao, H. Q., He, Z., Liu, X., Wang, L., et al. (2020) · ACS symposium series · doi:10.1021/bk-2020-1364.ch010 · Cited by 4
Sandy, K., Maatouk, C., Khoury, K. E., & Khatounian, F. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102898 · Cited by 4
Seetoh, I. P., Jovin, D., & Lai, C. Q. (2021) · Applied Physics Letters · doi:10.1063/5.0065433 · Cited by 4
Latent heat thermal storage of solid-state phase transition in thermally stabilized hexagonal FeS
Wang, X., Zhang, X., Tong, P., Yang, C., Si, J., Xiong, T., Dong, B., Xie, L., Pan, C., Wang, M., et al. (2022) · Scripta Materialia · doi:10.1016/j.scriptamat.2022.115166 · Cited by 4
Technology in Design of Heat Exchangers for Thermal Energy Storage
Afshan, M. E., & Gowsalya, L. A. (2022) · IntechOpen eBooks · doi:10.5772/intechopen.108462 · Cited by 4
Sharar, D. J., Peters, C., Olver, K., Wilson, A. A., Tsang, H. H., & Altman, D. (2022) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm54085.2022.9899587 · Cited by 4
“This approach has been adopted commercially [4-10] but transition to high heat flux electronic/photonic components has been hindered by performance and integration considerations.”
BackgroundKallel, H., Thiboult, A., Mackay, M., Nadeau, D. F., & Anctil, F. (2023) · Journal of Hydrometeorology · doi:10.1175/jhm-d-22-0132.1 · Cited by 4
Padullés, R., Hansen, M. L., Andersen, M. P., Jensen, J. K., Elmegaard, B., & Zühlsdorf, B. (2023) · International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS) · doi:10.52202/069564-0198 · Cited by 4
Nanocontainers for Energy Storage and Conversion Applications: A Mini-Review
Kordas, G. C. (2023) · Nanomanufacturing · doi:10.3390/nanomanufacturing3030023 · Cited by 4
“…literature to produce these development of silica shells [1], styrene-methyl methacrylate copolymer [2,3], urea-formaldehyde (UF) [4,5], polystyrene (PS) [6], melamine formaldehyde (MF) [7], polymethyl methacrylate (PMMA) [8–11], polycarbonate (PC) [3,12], and polyurethane (PU) [13–15].”
BackgroundInfluentialOptimizing the Productivity of Solar Water Desalination System Using Firefly Algorithm
Senthilkumar, N., Deepanraj, B., Sundar, L. S., & Ravikumar, N. T. (2024) · IEEE International Conference on Intelligent Techniques in Control, Optimization and Signal Processing (INCOS) · doi:10.1109/incos59338.2024.10527668 · Cited by 4
“One such procedure is to equip the SBSS with thermal storage materials that can store heat from sunlight and can provide the energy for enhanced productivity [12].”
BackgroundXie, J., Chen, X., Yu, K., Gan, L., Hua, H., Wang, B., & Qu, Y. (2024) · Energies · doi:10.3390/en17164111 · Cited by 4
The Influence of the Shape of Granite on the Heat Storage Process in a Rock Bed
Nemś, M., Nemś, A., & Gębarowska, K. (2020) · Energies · doi:10.3390/en13215662 · Cited by 4
“The research of other scientists often refers to the analyses and studies concerning filling materials in the form of spheres [1,8].”
BackgroundThermal Energy Storage Methods and Materials
Chavan, S. (2022) · Engineering optimization · doi:10.1007/978-981-19-4502-1_3 · Cited by 5
Nuñez, S. M., Preuss, F. E. T., & Macía, Y. M. (2024) · Applied Sciences · doi:10.3390/app14093690 · Cited by 3
Gouissem, L., & Rouabah, F. (2024) · Sustainable polymer & energy · doi:10.70322/spe.2024.10012 · Cited by 3
Xu, Y. X., Li, J. Y., Jiang, L., Yan, J. F., & Zhao, C. (2025) · Energy · doi:10.1016/j.energy.2025.135211 · Cited by 3
Bektas, H., Cai, R., Raza, S., Líu, J., & Li, F. (2025) · Journal of Materials Chemistry A · doi:10.1039/d5ta02329g · Cited by 3
Harnessing entropy: Innovations in energy efficiency and sustainability
Yasuri, A. K. (2025) · Sustainable Futures · doi:10.1016/j.sftr.2025.100952 · Cited by 3
Leaving Glauber’s Salt Island: The Road to Stabilisation
O’Neill, P., Stamatiou, A., & Fischer, L. (2025) · Colloids and Interfaces · doi:10.3390/colloids9050060 · Cited by 3
Döğüşcü, D. K. (2025) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2025.104202 · Cited by 3
Zhang, F., Wei, W., Fang, Q., & Fan, X. (2025) · Crystals · doi:10.3390/cryst15100889 · Cited by 3
“Lithium chloride (LiCl), in particular, demonstrates strong hygroscopicity and significant heat release, making it a promising candidate for rapid energy regulation [15].”
Shehram, M., Hamidi, M. N., Wahab, A. A. A., & Desa, M. K. M. (2025) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4070216 · Cited by 3
Performance enhancement of a Latent Heat Thermal Energy Storage for Domestic Hot Water production
Champel, B., Bruch, A., & Bentivoglio, F. (2025) · Energy Reports · doi:10.1016/j.egyr.2025.10.005 · Cited by 3
Li, J., Zhao, Z., Zi, J., Liu, J., & Nie, C. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.128856 · Cited by 3
Tunable thermal phase-change materials from common detergents
Laorenza, D. W., Dev, V. M., Casaday, C. E., & Mason, J. A. (2025) · Chem · doi:10.1016/j.chempr.2025.102820 · Cited by 3
Zero carbon buildings achieve high energy performance through integrated design and technology
Massoud, P. (2025) · Discover Sustainability · doi:10.1007/s43621-025-02005-y · Cited by 3
“Another research highlights that TES systems can reduce peak energy demand by up to 40%, making them a valuable tool for energy management in ZCBs [12].”
IoT-enabled experimental validation of fuzzy logic control for in solar thermal collector systems
Khanghah, M. S., Bonvin, A., & Moghaddam, F. (2025) · Solar Energy Advances · doi:10.1016/j.seja.2025.100125 · Cited by 3
Thermo‐Responsive Smart Window Coupled with Heat Storage Effect
Cheng, T., Zhang, X., Niu, Z., Ma, S., He, D., Wei, Z., Zou, W., Ding, Y., & He, Z. (2025) · Small · doi:10.1002/smll.202510952 · Cited by 3
Desalegn, G. T., Alamnia, A. T., & Belew, M. L. (2025) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2025.101508 · Cited by 11
Kim, K.-H., Kim, Y., & Song, Y.-H. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2025.120291 · Cited by 3
Fukunaga, S., Hotta, M., & Koga, N. (2026) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5c07824 · Cited by 3
Gao, J., Zhao, J., Li, Y., Xie, Y., Zhou, B., Huang, B., & Wang, X. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.121135 · Cited by 3
Abdelaziz, N., Bouali, B., Guerraiche, D., & Zaitri, T. (2026) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-026-0259-0 · Cited by 3
Thermo-physical laboratory analyses of microencapsulated PCMs for thermal energy storage systems
Franzè, S., Dalconi, M. C., Agresti, F., Garbin, E., Barison, S., Cesare, B., Santa, G. D., & Galgaro, A. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.145989 · Cited by 3
Lüchinger, R., Haase, M., Baumann, M., Walter, H., & Worlitschek, J. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.121719 · Cited by 3
“TES facilitates the thermal storage of excess energy for later use in heating applications [35].”
Synergetic properties of advanced materials for high-power and high-temperature applications
Mengesha, W. G., & Nagessar, K. (2026) · Discover Nano · doi:10.1186/s11671-026-04479-9 · Cited by 3
Baidoo, E. B., Tulashie, S. K., Alale, E. M., Addai, C. M., Donkor, D., Helegah, F., Oduro, J., & Arafat, K. (2026) · International Journal of Ambient Energy · doi:10.1080/01430750.2026.2676631 · Cited by 3
Hossain, M. S., & Rahman, M. A. (2022) · Central Asian Journal of Theoretical and Applied Science · doi:10.51699/cajotas.v3i5.1696 · Cited by 3
Zourou, A., Ntziouni, A., & Kordatos, K. (2026) · Crystals · doi:10.3390/cryst16080489 · Cited by 3
Temperature distribution in a concrete slab with sand, gravel and radiant barrier
Abubakkar, A., & Mohan Kumar, A. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.11.651 · Cited by 3
Huo, Y., Shen, S., Zhou, H., Wang, S., & Rao, Z. (2023) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2023.106858 · Cited by 3
Li, B., Buisson, L., Clark, R.-J., Ushak, S., & Farid, M. M. (2024) · Energies · doi:10.3390/en17030578 · Cited by 3
Wang, W., Fu, T., & Fang, G. (2024) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-024-10184-4 · Cited by 3
“The integration of renewable energy and thermal energy storage (TES) systems, with an efficiency of greater than 96%, can lead to decarbonization of the energy sector (Ref 3).”
Energy Storage Devices - A Comprehensive Overview
Abdelaziz, A. Y., Mossa, M. A., & Bajaj, M. (2024) · IntechOpen eBooks · doi:10.5772/intechopen.1003436 · Cited by 3
Kumar, M., V, Ray, A. K., & Rakshit, D. (2025) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-025-05511-2 · Cited by 3
Phase change materials (PCMs) for building energy efficiency: A review
Dická, Z., Dolníková, E., & Katunský, D. (2025) · E3S Web of Conferences · doi:10.1051/e3sconf/202564101003 · Cited by 3
Sanmartí, O., Vera, J., Torras, S., & Pérez-Segarra, C. D. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.107263 · Cited by 3
Effectiveness of introducing heat storage to repress cost increase
Song, J., Wallin, F., & Li, H. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.01.786 · Cited by 3
Energy Efficiency Modernizations at the Industrial Plant: A Case Study
Broniszewski, M., & Werle, S. (2020) · Ecological Chemistry and Engineering S · doi:10.2478/eces-2020-0011 · Cited by 4
Meta-analysis of concrete as a thermal energy storage medium
Administrator, S., Mourad, G., Lennox, H., Turner, M., & Traynor, M. (2020) · PAM Review Energy Science & Technology · doi:10.5130/pamr.v7i0.1596 · Cited by 3
Arabkoohsar, A., & Ebrahimi‐Moghadam, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820023-0.00002-x · Cited by 3
Thermal Enhancement for Paraffinic Thermal Energy Storage by Adding Volcanic Ash
Adhitya, D. C., Rahmalina, D., Ismail, I., Nurtanto, M., & Abdillah, H. (2021) · VANOS Journal of Mechanical Engineering Education · doi:10.30870/vanos.v6i1.10990 · Cited by 3
Thermal Insulation of Building Envelope for Ecological Conservation
Ali, M. F., & Natarajan, M. M. V. (2021) · Springer eBooks · doi:10.1007/978-3-030-76073-1_11 · Cited by 3
Xia, Q. X., Feng, S., Kong, M., & Chen, C. (2021) · Sustainability · doi:10.3390/su132212783 · Cited by 7
“Compared to sensible and latent thermal energy storage systems, the TCES has advantages of higher energy storage densities and ideally no losses for long-term storage [11,12].”
BackgroundRoom-Temperature Hydrogen Absorption of Ti with Robust Surface Coated by Hexagonal Boron Nitride
Shinzato, K., Nakagawa, Y., Yang, S., Isobe, S., Shibayama, T., Miyaoka, H., & Ichikawa, T. (2022) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c03348 · Cited by 3
Energy Savings Analysis for Operation of Steam Cushion System for Sensible Thermal Energy Storages
Zwierzchowski, R., Niemyjski, O., & Wołowicz, M. (2022) · Energies · doi:10.3390/en15010286 · Cited by 3
Energy and exergy analysis of pebble bed thermal energy storage system for diesel engine exhaust
Johar, D. K., Sharma, D., Yadav, H., & Patel, S. (2022) · Thermal Science · doi:10.2298/tsci210628072j · Cited by 3
Design of concentrated solar thermal powered heat exchanger completed with energy storage material
Riskina, S., Setiawan, A., Gunawati, G., & Dewi, R. (2023) · AIP conference proceedings · doi:10.1063/5.0133276 · Cited by 3
Thermal-Mass and Microbiological Analysis of Forced Air Flow through the Stone Heat Accumulator Bed
Kurpaska, S., Wolny-Koładka, K. A., Malinowski, M., Tomaszek, K., & Latała, H. (2023) · Energies · doi:10.3390/en16114456 · Cited by 3
“Sacharczuk and Taler [13], as well as Sarbu and Sebarchievici [14], indicate that HA systems, through their collaboration with solar collectors, are an important part of RES technology.”
BackgroundGbekou, F. K., Boudenne, A., Eddhahak, A., & Benzarti, K. (2023) · Rilem bookseries · doi:10.1007/978-3-031-33465-8_63 · Cited by 3
Metadata
- Authors
- Sarbu, I., & Sebarchievici, C.
- Affiliations
- Department of Building Services Engineering, Polytechnic University of Timisoara, Piata Victoriei, No. 2A, 300006 Timisoara, Romania
- ORCID
- Sarbu, Ioan
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2018-01-14
- Volume
- 10
- Issue
- 1
- Pages
- 191
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2786385826
- Cited by
- 1,311
- References
- 90
- Citations by year
- 2026: 159 · 2025: 215 · 2024: 177 · 2023: 176 · 2022: 197 · 2021: 174 · 2020: 122 · 2019: 67 · 2018: 23
- FWCI
- 61.67
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
- Keywords
- thermal energy storage, solar heat, building energy demand, sensible heat storage, latent heat storage, phase change materials, underground thermal energy storage, packed bed storage, solar water heating, heat pumps, concentrated solar power, storage capacity calculation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.