Slag and Activator Chemistry Control the Reaction Kinetics of Sodium Metasilicate-Activated Slag Cements
Open accessThe DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Abstract
The reaction kinetics of four commercial ground granulated blast furnace slags with varying percentages of MgO (6 to 14 wt.%), activated with four different doses of sodium metasilicate, were evaluated using isothermal calorimetry. The reaction kinetics were strongly dependent on the dose of the alkaline activator used, and the chemical and physical properties of the slag. When using low concentrations of sodium metasilicate as an activator, the MgO content in the slag influences the kinetics of the reaction, while the CaO content plays a more significant role when the concentration of metasilicate is increased. This study elucidated a close relationship between the dose of the alkali-activator and the chemistry of the slag used, although it was not possible to identify a clear correlation between any of the published chemically-based “slag quality moduli” and the calorimetry results, highlighting the complexity of blast furnace slag glass chemistry, and the importance of the physical properties of the slag in defining its reactivity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Self-citationAdvances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Self-citationBen Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Geopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Self-citationHaha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.002 · Cited by 914 · cited 5×
“activated slags with higher slag MgO content reacted more rapidly than those with lower MgO content [15].”
BackgroundResultInfluentialEvolution of binder structure in sodium silicate-activated slag-metakaolin blends
Bernal, S. A., Provis, J. L., Rose, V., & Mejía de Gutierrez, R. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.09.004 · Cited by 786 · cited 1×
“This drives faster dissolution of the slag particles and precipitation of mainly C-(A)-S-H type gels [11,22,23], which have been reported as the main reaction product for the silicate activated slags used in this study, and others of comparable composition [9].”
MethodSelf-citationFactors affecting the strength of alkali-activated slag
Wang, S.-D., Scrivener, K. L., & Pratt, P. L. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90026-4 · Cited by 716 · cited 2×
“However, silicate-activated slag cements exhibit higher mechanical performance and stability than hydroxide-activated slag cements due to the nature of the reaction products formed [5].”
BackgroundProvis, J. L., & van Deventer, J. S. J. (2009) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845696382 · Cited by 646
Self-citationHaha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.08.005 · Cited by 580
Incorporation of aluminium in calcium-silicate-hydrates
L’Hôpital, E., Lothenbach, B., Le Saout, G., Kulik, D., & Scrivener, K. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.007 · Cited by 551 · cited 2×
“The bulk gel chemical compositions are controlled mostly by the availability of CaO, SiO2, and Al2O3 [30,31], which in practice relate to the chemistry of the slag used, the activator dose, and the degree of reaction achieved.”
Background
Research works printed but not linked: 2
- Osborn, E.F., Roeder, P.L., and Ulmer, G.C. (1969). Part I—Phase equilibria at solidus temperatures in the quaternary system CaO-MgO-Al2O3-SiO2 and their bearing on optimun composition of blast furnace slag and on slag properties. Bulletin of the Earth and Mineral Sciences Experiment Station, The Pennsylvania State University.
- Smolczyk, H.G. (July, January 30). Slag structure and identification of slags. Proceedings of the 7th International Congress on the Chemistry of Cement, Paris, France.
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationLi, L., Xie, J., Zhang, B., Feng, Y., & Yang, J. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.130389 · Cited by 160
Luukkοnen, T., Sreenivasan, H., Abdollahnejad, Z., Yliniemi, J., Kantola, A. M., Telkki, V., Kinnunen, P., & Illikainen, M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117354 · Cited by 155
A Review of Durability and Strength Characteristics of Alkali-Activated Slag Concrete
Mohamed, O. A. (2019) · Materials · doi:10.3390/ma12081198 · Cited by 163
“In general, the high pH of the alkaline activator promotes dissolution of GGBS, which drives chemical reaction and strength development [14].”
BackgroundPalomo, A., Maltseva, O., García-Lodeiro, I., & Fernández‐Jiménez, A. (2021) · Frontiers in Chemistry · doi:10.3389/fchem.2021.705475 · Cited by 131
Ke, X., Bernal, S. A., Provis, J. L., & Lothenbach, B. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106158 · Cited by 117
Self-citationEffect of superplasticizers on properties of one-part Ca(OH)2/Na2SO4 activated geopolymer pastes
Alrefaei, Y., Wang, Y., Dai, J.-G., & Xu, Q. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117990 · Cited by 115
Roles of hybrid activators in improving the early-age properties of one-part geopolymer pastes
Wang, Y., Alrefaei, Y., & Dai, J. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124880 · Cited by 89
Alrefaei, Y., Wang, Y., & Dai, J. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103917 · Cited by 83
Hamdan, A., Song, H., Yao, Z., Alnahhal, M. F., Kim, T., & Hajimohammadi, A. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2023.107311 · Cited by 72
Ke, X., & Duan, Y. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108801 · Cited by 70
Self-citationEffects of mixing water temperatures on properties of one-part alkali-activated slag paste
Almakhadmeh, M., & Soliman, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121030 · Cited by 68
Humad, A. M., Habermehl-Cwirzen, K., & Ćwirzeń, A. (2019) · Materials · doi:10.3390/ma12203447 · Cited by 67
“The MgO content of the slag seemed to effect the reaction kinetics especially with low concentrations of the alkali activator, while, the CaO content was more critical at higher concentrations [28].”
BackgroundYliniemi, J., Walkley, B., Provis, J. L., Kinnunen, P., & Illikainen, M. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09651-6 · Cited by 63
Self-citationAn experimental review of the reaction paths followed by alkali-activated slag pastes
Paillard, C., Paillard, C., Sanson, N., Palacios, M., Berté, A., Boustingorry, P., Jachiet, M., Giraudeau, C., & Kocaba, V. (2024) · Cement and Concrete Research · doi:10.1016/j.cemconres.2024.107765 · Cited by 49
de Hita, M. J., & Criado, M. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.130272 · Cited by 48
Self-citationThermodynamic Modeling and Experimental Study of Carbonation of Alkali-Activated Slag Cements
Park, S., Lothenbach, B., Jang, J. G., Kim, H.-K., & Lee, N. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c05789 · Cited by 43
Activation kinetic model and mechanisms for alkali-activated slag cements
Caron, R., Patel, R. A., & Dehn, F. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126577 · Cited by 45
Waste-Based One-Part Alkali Activated Materials
Gonçalves, M., Vilarinho, I. S., Capela, M. N., Caetano, A. P. F., Novais, R. M., Labrincha, J. A., & Seabra, M. P. D. S. (2021) · Materials · doi:10.3390/ma14112911 · Cited by 44
“The second peak (acceleration/deceleration period), whose maximum is reached about 5 h after the start, corresponds to the nucleation, growth, and precipitation of the reaction products [34].”
BackgroundHamdan, A., Hajimohammadi, A., Rawal, A., & Kim, T. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.107058 · Cited by 40
Huang, Z., Zhang, Z., Shi, C. W., Zhu, Y., Zhou, Z., Jia, X., Ren, Q., & Jiang, Z. (2025) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2025.106057 · Cited by 41
Alzaza, A., Ohenoja, K., & Illikainen, M. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104128 · Cited by 40
Li, Y., Lei, W., Zhang, Q., Yang, Q., He, X., Su, Y., Tan, H., Liu, J., & Wang, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128661 · Cited by 42
Aktürk, B., & KIZILKANAT, A. B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118260 · Cited by 36
Effects of Curing Conditions on Shrinkage of Alkali-Activated High-MgO Swedish Slag Concrete
Humad, A. M., Provis, J. L., & Ćwirzeń, A. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00287 · Cited by 32
Self-citationSmall oscillatory rheology and cementitious particle interactions
Liberto, T., Bellotto, M. P., & Robisson, A. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106790 · Cited by 32
Evaluation on Strength Properties of Lime–Slag Stabilized Loess as Pavement Base Material
Jia, L., Zhang, L., Guo, J., Yao, K., Lim, S. M., Li, B., & Xu, H. (2019) · Sustainability · doi:10.3390/su11154099 · Cited by 28
Hamdan, A., Hajimohammadi, A., Njegic, B., & Kim, T. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2023.107103 · Cited by 28
de Hita, M. J., & Criado, M. (2022) · Materials · doi:10.3390/ma15030992 · Cited by 28
“The formation of these gels was the result of a condensation reaction between the silicate and the aluminate species and silicate present in the alkaline activator [36,43].”
BackgroundSelf-citationCaron, R., Patel, R. A., Miron, G. D., Galliard, C. L., Lothenbach, B., & Dehn, F. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.106398 · Cited by 38
Immobilization of Hazardous Wastes on One-Part Blast Furnace Slag-Based Geopolymers
Paz-Gómez, D. C., Vilarinho, I. S., Pérez-Moreno, S. M., Carvalheiras, J., Guerrero, J. L., Novais, R. M., Seabra, M. P. D. S., Ríos, G., Bolívar, J. P., & Labrincha, J. A. (2021) · Sustainability · doi:10.3390/su132313455 · Cited by 25
Jin, Y., Feng, W., Zheng, D., Dong, Z., Cui, H., Li, M. K., Sang, G., & Tang, W. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118900 · Cited by 23
Alrefaei, Y., Wang, Y., Qian, Y., & Dai, J. (2022) · Journal of Advanced Concrete Technology · doi:10.3151/jact.20.139 · Cited by 20
“Such a range of solid activator content complies with the recommendation of previous research (Nematollahi et al. 2015; Criado et al. 2018).”
ResultThermodynamic Modeling Study of Carbonation of Portland Cement
Reddy, K. C., Seifu, M. N., & Park, S. (2022) · Materials · doi:10.3390/ma15145060 · Cited by 23
Effect of slag pre-carbonation on its early-age reactivity in alkali activated binder
Mutti, M., Joseph, S., Snellings, R., & Çizer, Ö. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.134413 · Cited by 20
Luukkοnen, T., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2020) · PLoS ONE · doi:10.1371/journal.pone.0242462 · Cited by 21
Peracetic acid as a novel blowing agent in the direct foaming of alkali-activated materials
Bhuyan, M. A. H., Kurtuluş, C., Heponiemi, A., & Luukkοnen, T. (2022) · Applied Clay Science · doi:10.1016/j.clay.2022.106727 · Cited by 17
“The second peak after the addition of H 2 O 2 or PAA is related to nucleation, growth, and precipitation of (C,N)-(A)-S-H gels (Torres-Carrasco and Puertas, 2017; Criado et al., 2018).”
BackgroundAlkali Activated Binders Based on Biomass Bottom Ash and Silica By-Product Blends
Vaičiukynienė, D., Nizevičienė, D., Kantautas, A., Kielė, A., & Bocullo, V. (2020) · Waste and Biomass Valorization · doi:10.1007/s12649-020-01042-0 · Cited by 16
“In previous work [3] it was stated that during alkali activation alumina silicate precursors dissolved and the ionic species such as monomeric silicate anions formed.”
BackgroundIncorporation of Cement Bypass Dust in Hydraulic Road Binder
Števulová, N., Strigáč, J., Junák, J., Terpáková, E., & Holub, M. (2020) · Materials · doi:10.3390/ma14010041 · Cited by 14
“The high pH of the alkaline activator promotes dissolution of GGBS, which drives the chemical reaction and strength development [47].”
BackgroundCaron, R., Patel, R. A., Bogner, A., & Dehn, F. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131272 · Cited by 13
Extension of the fib MC 2010 for basic and drying shrinkage of alkali‐activated slag concretes
Caron, R., Patel, R. A., & Dehn, F. (2022) · Structural Concrete · doi:10.1002/suco.202100901 · Cited by 12
Bílek, V., Kalina, L., Dvořák, R., Novotný, R., Švec, J., Másilko, J., & Šoukal, F. (2023) · Materials · doi:10.3390/ma16051908 · Cited by 10
“The third calorimetric peak is mainly associated with the acceleration/deceleration stage of hydration [7,8], the main hydration peak [46], or the bulk hydration peak [31,32], associated with massive precipitation of reaction products, especially the C-A-S-H gel.”
BackgroundGevaudan, J. P., Timounay, Y., Mayrhofer, L., Zarshenas, M., & Moseler, M. (2023) · Journal of the American Ceramic Society · doi:10.1111/jace.19342 · Cited by 13
“46 Eventually, the lack of oxidizing agents, primarily O 2 in activated slag materials, can kinetically hinder the oxidation of sulfides (reactions 7–14) and hence the passivation of embedded steel.”
Effect of nanoparticles on the hydration of NaOH‐activated GGBFS
Joseph, S., & Unluer, C. (2023) · Journal of the American Ceramic Society · doi:10.1111/jace.19572 · Cited by 8
Jin, Y., Feng, W., Zheng, D., & Dong, Z. (2023) · Materials · doi:10.3390/ma16217032 · Cited by 7
“Studies on these aspects have mostly been parallel, with only a handful of works [3–5] that have evaluated both aspects.”
Schade, T., & Middendorf, B. (2023) · Materials · doi:10.3390/ma16114104 · Cited by 9
“This agrees with different literature statements that the influence of GGBFS decreases with increasing alkali content in the activator [45,46].”
BackgroundSouayfan, F., Rozière, E., Loukili, A., & Justino, C. (2023) · Materials · doi:10.3390/ma16175824 · Cited by 7
“The initial increase in Young’s modulus can be attributed to the early formation of C-A-S-H gel [41,42], as indicated by the simultaneous first peak in the heat flux.”
BackgroundHamdan, A., Kim, T., & Hajimohammadi, A. (2022) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2022.167 · Cited by 5
Masi, G., Pacente, C., Ferrari, L., Nagmutdinova, A., Franzoni, E., & Bignozzi, M. C. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.02.377 · Cited by 3
Hydrated blends of fired clay and NaOH: Influence of the processing parameters via polynomial models
Hafid, K. E., & Hafid, H. E. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103366 · Cited by 3
Factors Affecting Compressive Strength Development in Alkali-activated Slag Concrete
Mohamed, O. A., Khattab, R., & Alzo’ubi, A. K. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/603/4/042037 · Cited by 3
“5 do not support dissolution of GGBS and don not speed up the hydration of GGBS [3].”
BackgroundRecycling cement bypass dust and granulated blast furnace slag into hydraulic road binder
Števulová, N., Junák, J., Strigáč, J., & Junáková, N. (2022) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1252/1/012010 · Cited by 3
Performance of One-Part Alkali-Activated Self-Consolidated Mortar
Kanaan, D. M., & Soliman, A. M. (2022) · ACI Materials Journal · doi:10.14359/51734201 · Cited by 4
de Hita, M. J., Torres, E., Geddes, D. A., Provis, J. L., & Criado, M. (2025) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2025.156169 · Cited by 1
Self-citationPinheiro, C. G. D. S. (2022) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · doi:10.34626/1mdr-zm21 · Cited by 1
Wang, Y. H., Li, X., Jin, Y., & Zeng, C. (2026) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2026.e05760 · Cited by 1
Souayfan, F. (2021) · theses.fr (ABES) · doi:10.70675/e1c903a2zd57bz4585zbe0azfc6557453df3 · Cited by 2
Mécanismes d'actions des adjuvants des liants minéraux à base de laitier
Paillard, C. (2022) · theses.fr (ABES) · doi:10.70675/d7ad7688z91cez4b9dza468z03e3cb02f2f8
Alkali-Activated Calcined Clay for Sustainable Construction
Hamdan, A., & White, C. E. (2026) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-072924-091302
Characterization of geopolymer concrete made using waste glass-based activator
Solanki, P., & Jin, G. (2026) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2026.e06168
Karagöl, F., Yazıcı, N., Polat, R., & TURHAN, D. (2026) · Cold Regions Science and Technology · doi:10.1016/j.coldregions.2026.105040
Alrawashdeh, A. A. (2026) · Institutional Repository of the University of Granada (University of Granada)
حمد, ه. ف. م. (2025) · Sebha University Conference Proceedings · doi:10.51984/sucp.v3i3.3812
Bao, J., Wu, X., Yan, S., Song, Q., Wang, W., & Cui, Y. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.148684
Metadata
- Authors
- Criado, M., Walkley, B., Ke, X., Provis, J. L., & Bernal, S. A.
- Affiliations
- Instituto de Ciencias de La Construcción Eduardo Torroja (ES)
- University of Sheffield (GB)
- University of Bath (GB)
- University of Leeds (GB)
- Corresponding author
- Provis, John L.
- Bernal, Susan A.
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2018-12-11
- Volume
- 10
- Issue
- 12
- Pages
- 4709
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2905264317
- Cited by
- 63
- References
- 28
- Citations by year
- 2026: 6 · 2025: 2 · 2024: 2 · 2023: 14 · 2022: 14 · 2021: 8 · 2020: 9 · 2019: 8
- FWCI
- 5.62
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- White Rose Research Online (University of Leeds, The University of Sheffield, University of York) (acceptedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- FP7 Ideas: European Research Council (StG 335928)
- Engineering and Physical Sciences Research Council (EP/P013171/1, EP/R001642/1)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Engineering › Building and Construction › Materials Engineering and Processing
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Keywords
- ground granulated blast furnace slag, sodium metasilicate, alkali-activated slag, reaction kinetics, MgO content, CaO content, slag reactivity, isothermal calorimetry
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.